Stroj Klink nakup rabljenega (75.934)

Leto izdelave: 1960, Stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1733, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with indexing table (2 stations) Power supply: 380V / 50Hz Hedpfx Aegyd S Sof Tefb Rated current: 35 A Connected load: 7.5 kW The machine has been completely overhauled and is therefore in very good condition.

Leto izdelave: 1999, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: Hjdpfxjr A Hcbj Af Tsfb • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Leto izdelave: 1971, Stanje: zelo dobro (rabljeno), Horizontal Internal Broaching Machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Year of manufacture: 1971 Max. pulling force: 16 t Max. stroke: 1800 mm Max. cutting speed: 7 m/min Max. return speed: 25 m/min Max. tool diameter: Ø 95 mm Hfsdpehpqqusfx Af Tsb Weight: 4.8 t

Leto izdelave: 1955, Stanje: rabljeno, številka stroja/vozila: 1331, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1955 Weight: approx. 2,950 kg Machine No.: 1331 General / Technical data: Hydraulic horizontal broaching machine in good, ready-to-use condition Hfodpfxjdbr H Te Af Teb Broaching length: 1,500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: Universal pull head for flat shafts up to 26 mm width Through bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (restricted by oil and chip tray) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6,200 mm x 700 mm x 1,900 mm (excluding working area) Power supply / connected load: 380 Volt 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shafts • The machine features a movable coolant and cutting fluid system for 2 media • The machine comes with an oil and chip tray and a tool feed carriage Remarks: The machine is ideal for producing keyways and profiles. The machine runs smoothly and is very clean in the guideway and cylinder areas. Broaching tools and arbors can be supplied upon request. The machine is available for viewing and demonstration, powered up in our warehouse.

Leto izdelave: 1958, Stanje: rabljeno, številka stroja/vozila: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of Manufacture: 1958 Weight: 2,500 kg General Information / Technical Data: Used vertical hydraulic internal broaching machine with one broaching station, in operational condition Pulling force: 6,000 kg Broaching length: 1,000 mm Chuck diameter: Ø 85 mm Maximum gap between cylinders: 280 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1,000 x 1,200 x 2,800 mm Power supply / connected load: 380V, 50 Hz / 4 kW Accessories / Special Features: Machine is equipped with a workpiece table for one broaching station. The tool clamping system is designed for spring-actuated locking (DIN 1415). Hfjdeda Ugispfx Af Tob The machine has an integrated coolant system. A double pull-head for two flat broaching tools with workpiece support plate is included. Remarks: The machine is in a good condition considering its age and is ready for immediate use. It is designed for manual operation in medium batch production. For optimal use, a machine pit or alternatively a platform is recommended. Draw heads can be supplied on request. The machine does not include an automatic tool feeder. The machine can be inspected under power in our warehouse.

Leto izdelave: 1962, Stanje: rabljeno, številka stroja/vozila: 1790, Manufacturer: Karl Klink Model: RW 5 Year of manufacture: 1962 Weight: approx. 2,500 kg Machine no.: 1790 General / Technical Data: Hydraulic horizontal broaching machine in good, operational condition Broaching stroke: 1,320 mm Broaching stations: 1 unit Tensile force: 5,000 kg at 3 m/min (3,000 kg at 7 m/min) Broaching tool clamping: Universal draw head for flat shanks Through-bore in clamping table: Ø 100 mm Workpiece diameter: max. 420 mm (limited by the oil and chip tray) Cutting speed: hydraulically steplessly adjustable from 1 m/min to 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min to 25 m/min Hjdpsdl Uzksfx Af Tjfb Machine dimensions (W x D x H): approx. 4,600 mm x 600 mm x 1,900 mm (without work area) Power supply: 380 Volt / 50 Hz / 15A Hydraulic motor: 4 kW Accessories / Special equipment: • The machine is equipped with a universal draw head for flat shank tools • Coolant/lubrication system • No automatic tool loader included • Short oil and chip tray (approx. 900 mm) Remarks: The machine is ideal for producing keyways. Broaching needles and broaching arbors can be supplied on request. The machine is available for demonstration under power in our warehouse.

Leto izdelave: 1980, Stanje: dober (rabljeno), številka stroja/vozila: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine No.: 03.2123 General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition Pulling force: 25,000 kg Broaching length: 2000 mm Broaching stations: 3 units Distance between broaching stations: 160 mm Clamping head holder diameter: 3 x Ø 100 mm Passage width between cylinders (nominal): 500 mm Passage width between cylinders (measured): max. 590 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely variable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connected load: 380 Volt 50 Hz / 22 kW Hjdpjdffzfsfx Af Tofb Accessories / Special Equipment: The machine is currently supplied without a workpiece table. A sliding workpiece table with a special external broaching clamping device was previously mounted on the machine (workpiece sliding table is adaptable). The tool clamping system is equipped with hydraulic locking in both the pull bridge and the feed unit. The machine features a coolant system with integrated chip conveyor. Remarks: The machine is in very good condition and still has its original paintwork. It is designed for use in series production, and for optimal performance, installation on a dedicated foundation (pit) is ideally required. Pulling heads and ejectors are available on request. The machine can be viewed in our warehouse.

Leto izdelave: 1951, Stanje: dober (rabljeno), številka stroja/vozila: 1133, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1951 Weight: approx. 2750 kg Machine No.: 1133 General / Technical Data: Hydraulic horizontal internal broaching machine in good, ready-to-use condition Hfsdpfx Afodcdrpj Teb Broaching stroke: 1500 mm Broaching stations: 1 unit Pulling force: 10,000 kg at 3 m/min (5,000 kg at 7 m/min) Broaching tool clamping: universal pull head for flat shanks up to 26 mm wide Clear bore in clamping table: Ø 105 mm Workpiece diameter: max. 430 mm (limited by oil and chip tray) Cutting speed: hydraulically, steplessly adjustable from 2 m/min to 7 m/min Return speed: hydraulically, steplessly adjustable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 6200 mm x 700 mm x 1900 mm (without working area) Power supply / Connected load: 380 Volt, 50 Hz / 8 kW Hydraulic motor: 7.5 kW Accessories / Special equipment: • The machine is equipped with a universal pull head for flat shanks • The machine has an integrated coolant-lubricant system • The machine is fitted with an oil and chip tray featuring a tool feeder carriage Remarks: The machine is ideal for manufacturing keyways and profiles. It runs smoothly, with clean guides and cylinder. Broaching needles and arbors can be supplied upon request. The machine is available for demonstration under power at our warehouse.

Leto izdelave: 1956, Stanje: rabljeno, številka stroja/vozila: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 kg Machine number: 1413 General / Technical Data: Hedpfxedbmgmo Af Tefb Used vertical hydraulic internal broaching machine with up to 3 broaching stations, in operational condition. Tensile force: 13,000 kg (max.) Broaching length: 1200 mm Number of broaching stations: 3 Distance between broaching stations: 100 mm Pull head chuck diameter: Ø 85 mm Clear gap between cylinders: max. 390 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 m/min up to max. 25 m/min Machine footprint (W x D x H): approx. 1150 x 1500 x 3725 mm (with tool feeder extended) Power supply / Connected load: 380 Volt 50 Hz / 7.5 kW Accessories / Special Equipment: The machine’s traverse beam has 3 broaching tool holders; the workpiece table has 1 broaching station (modifiable). The tool clamping system and the tool feeder are designed for spring-actuated locking (DIN 1415). The machine is equipped with an automatic tool feeder; the existing tool feeder mount accommodates only 1 tool (central broaching station). An integrated coolant system for cutting oil is included. Remarks: The machine is in good condition considering its age and is immediately ready for operation. It is designed for manually operated production runs with medium batch sizes. The machine features an automatic cycle. For use, ideally a machine pit or alternatively a platform is required. Pull heads, tool holders, and tools are available on request. The machine is available for viewing under power at our warehouse.

Leto izdelave: 1960, Stanje: rabljeno, Max. pulling force: 20,000 kg Max. stroke: 1,250 mm Max. cutting speed: from 1 m/min to 7 m/min Max. return speed: from 5 m/min to 25 m/min Max. workpiece diameter: approx. 140 mm Max. tool diameter: approx. 50 mm Broaching positions: 2 stations Hfsdpfeui Sbox Af Tsb The machine is equipped with a 2-position rotary indexing table. It features an automatic tool feeder and is designed for manual series production. Tool locking in both the pull bridge and the tool feeder is mechanical spring-actuated (draw head DIN 1417).

Stanje: rabljeno, Leto izdelave: 1990, maks.: vlečna sila 25.000 kg maks.: dolžina orodja 3.520 mm maks.: hitrost rezanja 9,6 m/min prehodna širina: 520 mm Stroj je obdeloval ojnice in pokrove ojnic. Hedpfx Afjcm Eiwo Tefb Stroj je zasnovan za množično proizvodnjo (izhod: 400 kosov/uro)

Leto izdelave: 2007, Stanje: dober (rabljeno), Stroj je rabljen, vendar deluje dobro in reže naravnost. Prodaja se zaradi ukinitve proizvodnje. Hedpfsx U Dk Asx Af Tjfb

Stanje: dober (rabljeno), vrsta aktuacije: pnevmatičen, Na voljo je pnevmatske škarje za izsek pločevine. Deluje brezhibno, rezila bi bilo treba malo nabrusiti. Vse ostale podrobnosti so vidne na slikah. Izdelek si je mogoče in priporočljivo pred nakupom ogledati v naši hiši. Za to prosimo, da se dogovorite za termin. Pri nakladanju lahko pomagamo, na voljo je primeren viličar. Z veseljem priporočimo tudi špedicijo. Obrnite se na nas. Kot je pri rabljenih strojih običajno, je vsaka garancija izključena. Za varnost pri obratovanju stroja je odgovoren kupec/upravljavec sam. Pogoji pošiljanja: EXW. Vse navedene informacije so po najboljšem vedenju in vesti. Pridržujemo si pravico do napak. Hodpfsxl Hv Tox Af Tefb

Stanje: novo, Dimensions (LxWxH): 1.10 x 1.15 x 1.40 m Approx. weight: 1,150 kg Total power requirement: 4 kW Sheet thickness: 6 mm Details: - Hydraulic drive - Blade length: 200 mm - Notching angle adjustable from 60–140°, 6 mm Hfedpsd Ab Idefx Af Tjb - Notching angle adjustable from 30–59°, 4 mm

Stanje: novo, Dimensions (LxWxH): 0.80 x 0.85 x 1.20 m Approx. weight: 0.61 t Total power requirement: 4 kW Sheet thickness: 6 mm Details: Hodpfx Aod Ab Icof Tsfb - Hydraulic drive, 6 mm at fixed 90° - Blade length: 200 mm - Clipping angle: 90°

Stanje: kot nova (razstavni stroj), skupna masa: 900 kg, delovna dolžina: 2.400 mm, delovna širina: 1.000 mm, potrebna širina: 3.500 mm, zahteva za prostor dolžina: 3.500 mm, višina izdelka (maks.): 90 mm, priključek za stisnjen zrak: 12 letvica, Prodamo 6 etažno stiskalnico za širinsko lepljenje lesa, dimenzije lepljenja 2400 x1000 x 90 mm, ročno obračanje Hodpst Agh Dsfx Af Tjfb Nova , na zalogi, takojšnja dobava

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Machine used in a fish processing plant, previously used for washing squid. In very good condition, like new. Hodpfx Afjv T Rllj Tjfb

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.900 mm, skupna višina: 1.500 mm, skupna širina: 1.600 mm, vrsta vhodnega toka: trifazni, For sale: Maqford BEA2 forming machine. Working length: 150-1500 mm, maximum sheet thickness: 2.0 mm, tube diameter: 120-600 mm. Supplied with a set of jaws for the respective diameters. Hfodjwmniaepfx Af Tob

Stanje: pripravljen za uporabo (rabljen), Technische Daten Sägeblatt-Ø: 800 mm Motorleistung: 10 PS Hjdpfx Asrmgm Def Tefb Motorisierter Vorschub des Schnittbereichs: 400 mm Drehung der Vertikalachse: 180° Einlauftischlänge: 6.000 mm Motorisierter Anschlag rechts, 7.000 mm lang Rollentisch mit Holzzuführung über untere Rollen und Zylindern zur Ausrichtung Vertikale pneumatische Niederhalter Zweihandbedienung Stromversorgung und Motoren Spannung: 380 V Anschluss: Drehstrom Leistung: 8 kW Motor: 10,5 PS Abmessungen und Gewicht Gewicht: 1.200 kg

Stanje: zelo dobro (rabljeno), V zelo dobrem stanju. Hsdpoxcll Uefx Af Tsfb

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, The SLV, SLH hydraulic press is intended for thick gluing of wood (window profiles, glued beams, etc.) with natural drying of glued joints. Hfsdpfx Afogf A S Nj Tob The work surface is equipped with hydraulic compression units and hydraulic trolleys for aligning the elements. Regulation for each segment is individual or together. Possibility to close each cylinder. The surfaces that come into contact with the adhesive are protected with stainless steel tape. The press is designed so that it is also possible to later upgrade the segments to the desired working length.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 20 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SK02UXKP0365, merilno območje os X: 550 mm, merilno območje osi Y: 600 mm, Dražba Zeiss T-Scan Hawk z le 20 delovnimi urami! TEHNIČNI PODATKI Maksimalno merilno območje: 550 mm x 600 mm Hfsdjx Sqfnopfx Af Teb Merilna natančnost: 0,02 mm + 0,035 mm/m PODROBNOSTI O STROJU Laserski razred: Razred 2M (varen za oči) v skladu z IEC 60825-1:2014 Delovne ure: 20 OPREMA Prenosnik Programsko opremo GOM Inspect

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 40167, Dražba univerzalnega rezkalnega stroja MAHO! Hedpfjx Ngkzsx Af Tjfb

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 22 t, najv. debelina pločevine: 6 mm, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.270 mm, teža obdelovanca (maks.): 150 kg, Punching and nibbling machine with TRUMALIFT Sheetmaster! TECHNICAL SPECIFICATIONS Pressing force: 220 kN Max. sheet thickness: 6.4 mm Travel distance X-axis: 2,500 mm Travel distance Y-axis: 1,270 mm Positioning speed X-axis: 90 m/min Positioning speed Y-axis: 60 m/min Hsdpfx Asx I Hh Rsf Tjfb Positioning speed simulation: 108 m/min Positioning speed rotary axis: 360 °/sec Max. punching diameter: 76.2 mm Minimum programmable increment: 0.01 mm or 0.01° Max. workpiece weight: 150 kg Tool stations: 15 positions Tool change time: 1.5 - 6.5 sec MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,400 x 5,800 x 2,100 mm Machine weight: approx. 11,050 kg EQUIPMENT Multitool control "Softpunch" function Pneumatic follow-on cylinders Small-part sensor for programmable part chute Parts box for good parts Chip conveyor with bin Scratch-free processing Air-cushioned installation Additional clamping unit Preparation for TRUMALIFT SheetMaster TRUMALIFT Sheetmaster for workpieces up to 2,500 x 1,250 mm Stop system for loading stack with spreading magnets Manually movable scrap frame system

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.500 mm, najv. debelina pločevine: 1 mm, TEHNIČNI PODATKI Širina pločevine: 1.500 mm Debelina pločevine: 1,5 mm Hfjdpfx Afjx I Egro Tob