Horizontal broaching machine, broaching machine

Arthur Klink RH 10-50

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: Bwsdpfx Amor A Hcbj Eow • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Leto izdelave: 2026, stanje: novo, TNDG ročni pozicioner z ročnim kolesom in pnevmatsko zaponko. Merilni prikaz prek linearnega dajalnika in digitalnega prikaza. Na voljo v dolžinah 3, 4, 6 in 8 metrov Delovna višina: 800-1050 mm Dovoljena obremenitev: 70 kg/m Mere valjev: 40x300 mm Bedpopa Nzysfx Am Eeww EMBALAŽA IN MERE: TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg) Veselimo se vašega sporočila! Plantec Maschinen GmbH

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz Bedpfegyd T Eex Am Eeww

Stanje: rabljeno, Leto izdelave: 1968, Roller diameter: 500 mm Throat depth: 1050 / 485 mm Workpiece height: 300 mm Saw band length: 3920 - 4050 mm Cutting speed: 15 - 940 m/min Table height: 1040 mm Table size: 750 x 800 mm Table tilt: 15 degrees Total power requirement: 4.0 kW Machine weight: approx. 1750 kg Space requirement: approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angles - Mitre adjustment via lockable indexing every 15° - Saw band adjustable for optimal cutting angle - Hydraulic vice on both sides - Electric band break monitoring - Smooth-running saw carriage via preloaded ball linear guides - Additional table 450 x 450 mm Bedeiqp Erepfx Am Esww - Machine lamp

Stanje: novo, Leto izdelave: 2024, premer žaginega lista: 315 mm, največja višina reza: 150 mm, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, vrtljajska hitrost (min.): 17 obr/min, največja hitrost vrtenja: 33 obr/min, BERG+SCHMID Vertical Circular Saw Model VKS 315 Speed: 17 + 33 rpm • Mitre cuts: left 60° + right 45° • Vise with double clamping arm (4-way locked) for burr-free cuts and lateral quick adjustment • Saw table with large rotary plate and particularly stable vise for optimal material clamping • Robust prism guide for the saw head (adjustable dovetail guide) Bwodpferrvn Ajx Am Ejw • Automatic coolant system • Machine base with chip drawer • Metal lever for high clamping force • Counterholder with spring package included Saw blade dimensions: 315x40mm Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Delivery time: from stock Waiblingen Beinstein

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, AT SERIJA Vstopni model vlaknastega laserskega stroja za razrez pločevine in cevi En stroj, dve funkciji. Serija AT reže tako kovinske pločevine kot tudi kovinske cevi. Laserski stroji za razrez pločevin in cevi, serija A-T Izboljšana funkcionalnost Laserski stroji za rezanje pločevin in cevi, serija A-T Baza podatkov za visoko hitro rezanje Učinkovitost hitrega rezanja z zrakom se poveča za 37 %, ko režete ogljikovo jeklo. Laserski stroji za rezanje pločevin in cevi, serija A-T Aktivna funkcija preprečevanja trčenj Glave vlaknastih laserjev zaznavajo izbočene ovire in s tem učinkovito zmanjšujejo stopnjo poškodb ter znižujejo stroške vzdrževanja laserskega stroja. Laserski stroji za rezanje pločevin in cevi, serija A-T Bodor Lightning Izjemno hiter preboj materiala v povezavi s sistemom BodorGenius omogoča popolno izvedbo prebijanja med pomikom glave laserja po Z-osi. Laserski stroji za razrez pločevin in cevi, serija A-T Brez vibracij pri rezanju tankih pločevin Postopek rezanja poteka nemoteno tudi na robovih tankih pločevin ter zagotavlja rez brez valov ali tresljajev. Laserski stroji za rezanje pločevin in cevi, serija A-T Rezanje kotnika in U-profila Rezanje kotnikov in U-profilov je standardna funkcija, ki ne potrebuje dodatne namestitve. Laserski stroji za rezanje pločevin in cevi, serija A-T Iskanje robov na štirih straneh za višjo natančnost Optimizirana metoda in algoritem za iskanje robov zagotavljata večjo natančnost reza ter boljšo stabilnost stroja. Mehanska konfiguracija Bodpfx Amehtyutj Eoww Laserski stroji za rezanje pločevin in cevi, serija A-T Raztegljivi aluminijasti prečni nosilec Postopek raztezanja pri ultra visokem pritisku in lahko zasnovana konstrukcija; togost povečana za 60 %; masa znižana za 20 %; hitrost pomika stroja povečana za 50 %. Laserski stroji za rezanje pločevin in cevi, serija A-T Modularna delovna miza Modularna miza s prečniki skrajša čas demontaže ter poveča priročnost in togost. Laserski stroji za rezanje pločevin in cevi, serija A-T Pnevmatski vpenjalni sistem Vpenjanje materiala je enostavno in hitro, vpenjanje v 3 sekundah ter visoka ponovljivost natančnosti. Programsko Orodje BODORTHINKER BodorThinker je visokotehnološki inteligentni krmilni sistem za CNC laserske stroje, ki odlikuje zanesljiva stabilnost, enostavna namestitev in nastavitev, varno delovanje, široka funkcionalnost ter odlične zmogljivosti. Z BodorThinker je mogoče ustvariti modularne, prilagojene, avtomatizirane in informacijsko podprte rešitve laserskega razreza. Oblikovanje Nagrajen industrijski dizajn “Oskar za dizajn”: dobitnik dveh od treh največjih svetovnih nagrad za industrijski dizajn. Daljinsko upravljanje Ergonomska zasnova v obliki manga in priročno magnetno pritrdilo omogočata enostavno enoročeno upravljanje.

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Na voljo je 2-rezervoarska brizgalno/potopna čistilna naprava Mafac. Dimenzije košare X/Y/Z: 660mm/480mm/338mm, največja teža serije: 100kg, moč črpalke za brizganje: 7,5kW, smeri pršenja: 5, potopitev košare: 50%, polnilna količina: 830l, grelna moč: 30kW. Dimenzije stroja X/Y/Z: pribl. 2200mm/1500mm/2050mm, teža: pribl. 1400kg, krmiljenje: Siemens Simatic S7-1500. Dokumentacija je na voljo. Možen je ogled na lokaciji. Bwodpfx Aex I Rrgem Esw

Stanje: rabljeno, Leto izdelave: 1965, Groove width 3 - 90 mm Drawing length 430 mm Working speed 4 - 12 m/min Bwedpfx Amstv Iate Esw Groove length 400 mm Return speed 15 m/min Total power requirement 5.5 kW Machine weight approx. 1.4 t Space requirement approx. 1.3 x 1.7 x 1.5 m with various drawing needles and guides

Leto izdelave: 1965, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2549, General / Technical Data: Used horizontal hydraulic internal broaching machine in condition appropriate to its age, with heavy-duty manual tool feeder. Broaching Stroke: 2,000 mm Pulling Force: 25,000 kg (250 kN) Holder in Pulling Bridge: Ø 105 mm cylindrical Through Bore in Clamping Table: Ø 125 mm Clamping Surface (Workpiece Area): 440 mm x 440 mm Max. Workpiece Diameter: approx. 800 mm (limited by the tool feeder's chip tray) Cutting Speed: hydraulically infinitely variable from 1.5 m/min to 7 m/min Return Speed: hydraulically infinitely variable from 7 m/min to 25 m/min Oil Volume: Hydraulics approx. 450 L / Coolant approx. 100 L Machine Footprint (WxDxH): approx. 8,400 mm x 1,350 mm x 1,800 mm (without working area) Power Supply: 380 Volt, 50 Hz Connected Load: 19 kW Equipment: • The machine features a mechanical-hydraulic control for broaching and return stroke • The machine is equipped with an integrated coolant and cutting fluid system • The machine is fitted with a manually operated tool feeder • The broaching slide with puller head mount is flat-guided on both sides • Adjustable pull force limiter • Pull force display Accessories: • 1 universal puller head for flat shanks up to max. approx. 40 mm width • Indexing (dividing) head (see pictures) • Various special holders and clamping devices • Machine documentation Remarks: Bodpfxetuuvzj Am Eeww The machine is suitable for creating keyways with flat broaching tools as well as profile broaching. Thanks to the combined strength of the machine bed and the robust broach feeder, the machine is particularly well-suited for heavy profile broaching tools. The machine is used but in good condition relative to its age. The machine is available for viewing at our warehouse. The machine is new in our stock and has not yet been technically or visually refurbished. Profile broaching puller heads are available upon request, depending on DIN standard, dimensions, and stock availability.

Stanje: dober (rabljeno), Leto izdelave: 2001, Stroj je v dobrem stanju. Deli, ki so prikazani ročno, niso vključeni. Rezalna orodja niso priložena. Bedjrpk Rmepfx Am Ejww