Črv nakup rabljenega (16)

Stanje: rabljeno, PFAFF HSE63 High-Performance Worm Screw Jack Manufacturer: PFAFF Model: HSE63 Max. lifting force: 50 kN Max. load: 50 kN Screw drive torque at max. lifting force: 190 Nm Max. input shaft torque: 168 Nm Screw: M16 Worm gear with oil lubrication Oil capacity: 0.7 l Lrsdjugty Hspfx Al Ret Spindle length: 850 mm The stated price refers to 1 unit.

Stanje: rabljeno, Leto izdelave: 2011, Workpiece diameter 320 mm Thread length 570 mm Thread pitch 315 mm Total power requirement 17 kW Machine weight approx. 12 t Space requirements approx. m O F F E R We can offer you, subject to prior sale and errors, ex stock as follows: M I K R O M A T Universal Thread and Worm Grinding Machine Model GSU 320/1 PC Year 2011 Reconditioned # 2319.01.27 _____ Max. / Min. grinding diameter 3 – 320 mm Max. grinding length (Grinding wheel width 50 / 8 mm) 520 / 570 mm Centre distance 1,000 mm Max. workpiece weight 160 kg Workpiece spindle bore 40 mm Lead range min./max. 0.25 - 315 mm Max. lead angle + / - 40° Max. profile size 20 module Automatic radial dividing device 2/3/4/5/6/8/10/12/ 15/20/24/30/40/60 Lrodpfjt Hxbdox Al Rjt Relief grinding stroke 0 - 6 mm Plunge grinding depth 0 - 6 mm Workpiece rotational speed 0.125 - 100 rpm Rapid return 2 m/min Grinding wheel Ø x width x bore 500 x 60 x 203 mm Max. grinding wheel speed 1,595 rpm For dressing/centring 12 - 32 rpm Spindle drive approx. 6.5 kW Total drive 17 kW - 380 V - 50 Hz Weight 9,500 / 12,000 kg Accessories / Special Equipment • The machine was purchased in 2011 as a factory-reconditioned and electronically upgraded (new) machine directly from the manufacturer MIKROMAT! • Universal machine for automatic grinding of single and multi-start worms as well as threads with straight and curved flanks using single- or multi-profile grinding wheels. • The following grinding operations can be performed via simple cyclic operator guidance in the SCHLEICHER PLC control system PROMODUL U: longitudinal grinding, relief grinding, plunge grinding, groove grinding, taper grinding. In these operations, infeed and compensation occur automatically. For relief grinding and taper grinding, cams are additionally needed; division is done via change gears! • Grinding wheel hand dressing device for profiling single-profile wheels, left and right flank • Non-driven steel pressure roller burnishing device for mounting above the grinding wheel • Open rest for mounting on the grinding table, and closed 3-point rest • Workpiece carrier device in the workpiece spindle with various centres, various workpiece arbors • Hand division device for peripheral division for mounting on the workpiece spindle • Large number of change gears, additional accessories and spare parts, operating manuals. • Elaborate KNOLL coolant band filter system HL650/1500 with HYFRA cooling unit Condition: very good - demonstration ready – Delivery: immediately ex stock - as inspected Payment: strictly net – upon receipt of invoice We look forward to your order. We always stock thread grinding machines – please let us know your requirements!

Stanje: rabljeno, Leto izdelave: 1998, Krmiljenje Siemens Sinumerik Premer brusnega koluta: 900 mm Širina brusnega koluta: 20-80 mm Po naši oceni je stroj v dobrem rabljenem stanju. Ledpfoxuv Udox Al Rsrt Na voljo sta 2 stroja. Dodatna oprema, prikazana orodja in vpenjalna sredstva so vključena v obseg dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter predhodne prodaje!

Stanje: zelo dobro (rabljeno), Premer obdelovanca: 10 - 250 mm Dolžina navoja: 900 mm Navojni korak: 0,3 - 100 mm Vrtljaji vretena: 72 / 1700 - 2540 min⁻¹ Odrezovanje: 0,03 - 8 mm Maks. vpenjalna dolžina: 1190 mm Največji modul: 10 Obdelovalni vrtljaji: 0,4 - 160 min⁻¹ Skupna potrebna moč: 13 kW Ljdpfxoyb S Ris Al Rsrt Teža stroja približno: 7,4 t Potreben prostor približno: 4,5 x 2,0 x 2,1 m Veliko dodatne opreme: prirobnice, pretvorniki, naprave in valji za obdelavo, notranje brusno vreteno, podporniki ipd.

Stanje: rabljeno, Wheel diameter – max. 0-200 mm Lsdstuxa Ujpfx Al Rsrt Module – max. 25 Module – min. 0.5 with accessories and under-table Year of manufacture approx. 1995

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Max. workpiece diameter: 10–350 mm, max. grinding length/width: 690/60 mm, clamping length: 950–1330 mm, swivel angle: -60 to 60°, length: 6200 mm, width: 4000 mm, height: 2500 mm, weight: 9 t, equipped with oil filtration system, oil mist extraction, and additional accessories. Lsdpfx Asiph T Hol Rert

Stanje: rabljeno, Leto izdelave: 1979, Workpiece diameter 320 mm Thread length 300 mm Thread pitch mm Total power requirement 90 kW Machine weight approx. 12,000 kg Space requirement approx. m Thread/worm grinding machine for steering worm Ljdpfxet Hwnpe Al Rort

Stanje: rabljeno, Leto izdelave: 2012, Krmiljenje Siemens 840 D Teža stroja cca 13,5 t Prostorska zahteva cca 7m x 4m x 2,75m Pribor: Rezervoar za hladilno tekočino Brusni koluti Razni rezervni deli Navodila za uporabo in vzdrževanje CE skladnost Dimenzije: 7x4x2,75 m (DxŠxV) TEHNIČNI PODATKI: Podatki o obdelovancu: najv. zunanji premer: 250 mm z najv. premerom brusnega koluta Ø 450 mm najv. obdelovalni Ø nad mizo: 375 mm Globina profila za brusne kolute: 40 mm najv. dolžina obdelovanca: 3.600 mm najv. razdalja med konicama (1): 2.800 mm najv. naklonski kot: +/- 90° Število zob obdelovanca: 1 - 999 najv. teža obdelovanca: 250 kg Delovni prostor: Lrsdpoxh Rqtsfx Al Rjt Razdalja osi med vretenom obdelovanca in orodja: 355–170 mm Radialni hod: 185 mm Aksialni hod: 3.000 mm Kot vrtenja: +/- 90°

Stanje: rabljeno, Leto izdelave: 1986, Workpiece diameter 460 mm Thread length 900 mm Thread pitch 100 mm Total power requirement 10 kW Machine weight approx. 8 t Space requirement approx. m R E I S H A U E R (Switzerland) Universal - extra large - thread and worm grinding machine Model ULG 46 Year 1986 _____ ___ Grinding length: 900 mm Maximum workpiece clamping length: 1,190 / 1,400 mm Workpiece Ø / thread Ø, min./max.: 10 – 460 mm (!) Longitudinal adjustment of workhead on table: 210 mm Maximum workpiece weight approx.: 100 kg Work spindle bore approx.: 65 mm Lead range for single-rib wheels: 0.3 – 100 mm Maximum module: 10 Maximum lead angle: +/- 40° Grinding wheel dimensions, Ø x width: 350 x 20/40 mm Relief grinding size: 0.03 – 8 mm Presettable number of flutes: 2 – 10, 12, 14, and 16 27 workpiece speeds: 0.4 – 160 rpm Infinitely variable grinding wheel speeds: 72 – 2,500 rpm Spindle drive approx. 10 kW * Total connected load approx. 25 kW - 400 V - 50 Hz Weight approx. 8,000 kg Accessories / Special Features: Lodpfet H Smtsx Al Rsrt • Machine was originally built with an increased center height for a maximum workpiece swing of 460 mm, allowing thread machining on larger workpieces and housings (aircraft industry)! • Internal thread grinding device with two dressing devices (long and short spindles) • Various flanges with grinding wheels • USL 3200 dressing device for pressure roll profiling, mounted above the grinding wheel (not motorized) • USL 700 dressing device for manual profiling of single-ribbed grinding wheel flanks • Automatic plunge-cut device. Automatic lift-off of grinding slide for the return of the workpiece slide • Relief grinding device with several cams, also suitable for plunge grinding • Hydraulic tailstock with foot switch and expansion compensation • Two simple dressing devices, manually operated for straight profiling • Two 3-point steadies for heavy workpiece support • Various flanges, set of change gears, numerous coolant nozzles, setting gauge, 3 faceplates up to 500 mm diameter, separate electrical cabinet for adjusting various grinding cycles • Lift-off safety hood above the working area, monitored by limit switches, etc. No coolant device available, but connection to a central coolant supply with valve control as well as a separate coolant chiller and standalone dust extraction unit.

Stanje: rabljeno, Črv za C400 »Wolfking« Lredpfx Ajzzcriel Rjt

Stanje: pripravljen za uporabo (rabljen), Mitsubishi Electric RV-7FM-D1-S15 industrijski robot SN: FG606002R - manjša poškodba na zračnem priključku, rabljen, dobro ohranjen, 100% delujoč, obseg dobave po fotografijah POZOR: Stroške za pakiranje in dostavo prosimo povprašajte posebej! V naši trgovini so na voljo tudi naslednje komponente: krmilnik (Controller) "Mitsubishi CR750-07VD1-1-S15" / priključni kabel "BKO-FA0741H05-D" / priključni kabel "BKO-FA0739H05-D" Lodox Dw Nzspfx Al Rert

Stanje: zelo dobro (rabljeno), Ventil za filtriranje in regulacijo, vklopni ventil, vzdrževalna enota, separator vode, filtrirna posoda, pnevmatski filter, filter regulator, kombinirana vzdrževalna naprava, ventil filter-regulator -Proizvajalec: Festo, vzdrževalna enota s filtrom in regulatorjem -Vklopni ventili: MS6-EM1-1/2-S M56-EE-1/2-V24-S -Ventil filter-regulator: M56-LFR-1/2-D6-C-R-V-AS -Razdelilni moduli: M56-FRM-1/2-Y -Ventil za povečevanje tlaka: M56-DL-1/2 Lrsdpfxsx Rx S Tj Al Rot -Posamezne komponente: glej slike -Cena/dobava: komplet -Skupne mere: 440/340/V110 mm -Teža: 5,3 kg

Stanje: novo, moč: 95 kW (129,16 KM), vrsta prenosa: samodejen, vrsta goriva: dizel, barva: zelen, skupna masa: 8.500 kg, lastna masa: 5.500 kg, največja dovoljena obremenitev: 3.000 kg, konfiguracija osi: 4x4, število sedežev: 1, naslednji pregled (TÜV): 05/2026, emisijski razred: Euro 5, Leto izdelave: 2024, obratovalne ure: 45 h, voznikova kabina: drugo, medosna razdalja: 2.510 mm, največja hitrost: 40 km/h, Oprema: ABS, dodatne luči, filter saj, klimatska naprava, meglenke, pogon na vsa štiri kolesa, računalnik na krovu, servovolan, spojka prikolice, tempomat, Vehicle location: Bovenden Rear window, air conditioning, radio, cruise control, ABS (anti-lock braking system), elevated exhaust, differential lock, fog lights, high beam lights, work lights, trailer hitch with air, light, and hydraulic connections, roof hatch Wheelbase: 2,510 mm New vehicle from stock with day registration on 26.03.2024! Deutz-Fahr 6125 C RVShift Stage V Farmotion engine C variant, 40 km/h EXTRAS - Additional lift cylinders - Lower links with quick couplers (Walterscheid) Cat. III - Walterscheid electronic control unit for rear linkage - "Ready Kit" front loader preparation - Power Beyond coupling - Hinged front windshield - Mechanically suspended cab Tyres: 440/65R28 front, 540/65R38 rear ASM system (Automatic Section Management) - Mounting for external monitor - Cab roof with opening transparent roof window - Smartphone holder - Passenger seat - Radio with Bluetooth and DAB - Air-suspension seat - Automatic trailer hitch with Sauermann side stabilisation left/right - Dual-line air brake system M.R. - EU/DE version - Trailer brake - 12V socket + USB port + ISO connector - 2 additional front work lights - Repeater work lights - 120 Ltr. load-sensing front axle suspension - 2 electronic and 2 mechanical spool valves - Front hydraulic linkage Lsdpjzbx Syofx Al Rjrt - Complete 1,000 rpm front PTO for SDF 6125 C The vehicle can be switched to 50 km/h! Stoll front loader console ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Stanje: rabljeno, Leto izdelave: 1990, Technical Details: Lrodpjvnmnrofx Al Rst Automatic slide feed: 0.0025 - 0.05 mm Total power requirement: 100 kW Grinding spindle slide travel: 150 mm Approx. machine weight: 17 t Grinding spindle drive: 2 x 37 kW Grinding width: 30 - 150 mm Peripheral speed: 34 m/sec Workpiece speed: 60 - 300 mm/sec Grinding height: 70 mm Grinding wheel diameter: 750 mm Grinding tool: 750 x 75 x 350 mm Grinding wheel speed: 870 rpm Maximum workpiece diameter: 250 mm

Stanje: zelo dobro (rabljeno), Filter-regulacijski ventil, vklopni ventil, enota za vzdrževanje, ločevalnik vode, posoda filtra, pnevmatski filter, filter regulator, kombinacija naprav za vzdrževanje, filter-regulacijski ventil -Proizvajalec: Festo, vzdrževalna enota filter-regulacijskega ventila -Vklopni ventili: MS6-EM1-1/2-S M56-EE-1/2-V24-S -Filter-regulacijski ventil: M56-LFR-1/2-D7-C-R-V-AS -Odcepljevalni moduli: M56-FRM-1/2-AD7 -Ventil za dvig tlaka: M56-DL-1/2 -Posamezne komponente: glej fotografije -Cena/dobava: komplet Lrodpfx Aoxvxw Rel Rst -Skupna mera: 470/300/V110 mm -Teža: 4,5 kg

Stanje: rabljeno, Filter bowl, pneumatic filter, filter regulator - Manufacturer: Festo, pneumatic filter type MS6-LF-1/2-C-R-V Lredpjfvqvgsfx Al Rst - Connection: G1/2 - Pressure: max. 12 bar - Price: per unit - Quantity: 3 units - Carton dimensions: 280/120/H150 mm - Weight: 0.7 kg/unit