Klet Opažev nakup rabljenega (216)

Stanje: rabljeno, Leto izdelave: 1994, Overview These two isobaric pressure tanks (each with a capacity of 150 hl) were manufactured in 1994 by TMCI Padovan, originally from the wine industry and previously used for sparkling wine production. Featuring a full-surface cooling jacket and a pressure rating of up to 6 bar, the tanks are suitable for the fermentation, maturation, and storage of carbonated products such as beer, sparkling wine, and similar beverages. The tanks are constructed from carbon steel with an internal, food-grade epoxy coating and represent a widely used technology prior to stainless steel tanks becoming the industry standard. They offer a cost-effective alternative to stainless steel vessels, especially for operations with lower investment requirements. Each tank is fully insulated and equipped with a complete cooling jacket, allowing for temperature-controlled processing. As with all epoxy-coated vessels, regular renewal of the internal coating is required depending on usage and product conditions. TECHNICAL DATA Manufacturer: TMCI Padovan Year of Manufacture: 1994 Quantity: 2 units Type: Isobaric pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 150 hl per tank Material: - Shell: Carbon steel - Internal coating: Food-grade epoxy resin Insulation: Approx. 100 mm polyurethane with stainless steel cladding Pressure rating: 6 bar Dimensions (per tank): - Outside diameter: approx. 2,400 mm - Cylinder height: approx. 4,000 mm Bwedpsy Hknxefx Agtjl

Stanje: rabljeno, Leto izdelave: 1985, Overview These 5 insulated pressure tanks (each 100 hl), manufactured by TMCI Padovan in 1985, originated from the wine industry and were previously used for sparkling wine production. Due to their pressure resistance and fully jacketed cooling design, they are suitable for fermentation, maturation, and storage of carbonated products. The tanks are constructed from carbon steel with an internal food-grade epoxy coating—a technology widely used in the industry before stainless steel became standard. Although not as common as stainless steel tanks today, they offer a cost-effective alternative, especially for producers with lower investment budgets. Each tank is fully insulated and equipped with a complete cooling jacket, enabling temperature-controlled processes. Please note that the epoxy coating must be renewed regularly depending on use and product type. Technical Data Manufacturer: TMCI Padovan Year of manufacture: 1985 Quantity: 5 units Type: Pressure tank with full cooling jacket Application: Fermentation, maturation, storage of carbonated beverages Capacity: 100 hl per tank Material: - Vessel: carbon steel Bwjdpjy Hkkysfx Agtsl - Internal coating: food-grade epoxy resin Insulation: approx. 100 mm polyurethane with stainless steel cladding Pressure rating: 6 bar Dimensions (per tank): - External diameter: approx. 2,200 mm - Cylindrical height: approx. 4,000 mm

Leto izdelave: 1985, stanje: rabljeno, Pressure Tank Cellar with 4 upright 32,400 L stainless steel pressure tanks and double-seat valve solution at the operating level. The tanks are cooled with ice water. Machine (Additional): 4 pressure tanks Diameter per tank: 2,550 mm Total height per tank: 7,360 mm Cooling surface per tank: 25 m² Permitted operating overpressure: 3 bar Tank volume: 32,400 L Length: 12 m Width: 4 m Height: 7.5 m Material: Stainless steel 1.4301 Equipment: Tank cleaning device with spray head, safety valve, pressure gauge, cleaning air valve combination; sampler, level indicator with flaps, outlet flap, pressure tank documentation and drawings available Periphery: Inlet and outlet piping via double-seat valves Bedjvcqynjpfx Agtowl Weight: 2,585 kg

Stanje: rabljeno, Leto izdelave: 2018, Pregled Ti fermentacijski rezervoarji (Iso-Tank) so bili izdelani leta 2018 pri nemškem proizvajalcu BrauKon GmbH. Sistem sestavljajo 3 fermentacijski rezervoarji, namenjeni fermentaciji piva. Rezervoarji so še vedno nameščeni, priključeni na električno omrežje in takoj na voljo. Oprema si je po dogovoru mogoča ogledati v obratovanju. Tehnični podatki Prostornina: vsak po 10 hl Uporaba: fermentacija piva Konfiguracija: 3 × Iso fermentacijski rezervoarji. Bodpoywn Svefx Agtewl

Stanje: rabljeno, Tlačni tankovski klet z 7 tlačnimi rezervoarji. - 2 x 104 hl, 3 bar (Gross, 1983/1984) - 2 x 104 hl, 3 bar (Edel, 1978) - 1 x 92 hl, 3 bar (Ziemann, 1963) - 1 x 40 hl - 1 x 50 hl - različne črpalke in cevi Bjdpew Uvbljfx Agtewl Stroj (dodatek): 7 tlačnih rezervoarjev Material: nerjavno jeklo Oprema: klet za tlačne rezervoarje z neizoliranimi in nehlajenimi tlačnimi rezervoarji, 2 x 104 hl, 3 bar (Gross, 1983/1984), 2 x 104 hl, 3 bar (Edel, 1978), 1 x 92 hl, 3 bar (Ziemann, 1963), 1 x 40 hl, 1 x 50 hl

Stanje: rabljeno, Leto izdelave: 1985, Klet z tlačnimi rezervoarji z tremi pokončnimi tlačnimi rezervoarji iz nerjavečega jekla, vsak s prostornino 207 hl, z rešitvijo z dvojnim sedežem ventila na upravljalni ravni. Vsi rezervoarji so hladilni. Stroj (dodatno): 3 tlačni rezervoarji Prostornina posameznega rezervoarja: 20.700 l Bjdew Tmqnepfx Agtjwl Učinkovita hladilna površina na rezervoar: 18 m² Najvišji dovoljeni delovni tlak (notranji): 4 bar Dolžina: 2,10 m Širina: 2,10 m Višina: 6,66 m Material: nerjavno jeklo 1.4301 Oprema: Naprava za čiščenje rezervoarja s pršilno glavo, varnostni ventil, manometer, kombinacija čistilnega zraka in ventila; vzorčevalnik, indikator nivoja s loputami, iztočna loputa, prisotne knjige tlakovanih posod in risbe Periferija: Cevovodi za dovod in odvod preko dvojnih sedežnih ventilov Teža: 1985 kg

Stanje: rabljeno, Leto izdelave: 2014, Overview This set of 6 isobaric fermentation tanks was manufactured in 2014 by the Spanish company Talleres Perman S.L. Each tank has a capacity of 1,000 liters and is designed for fermentation and maturation under pressure, making them ideal for beer, cider, or sparkling wine. The tanks are equipped with integrated cooling jackets and feature decorative wooden cladding on the exterior, which can be removed if necessary. The tanks are for sale as a planned production increase was ultimately not realized. Available immediately. Technical details - Capacity: 6 x 1,000 liters - Working pressure: up to 3 bar - Diameter: approx. 125 cm - Height: approx. 190 cm - Bottom design: conical bottom with 30° angle - Type: isobaric fermentation and maturation tanks with cooling jackets - With integrated cooling jackets - With decorative wooden cladding (removable) Scope of delivery 6 x Isobaric fermentation and maturation tanks Talleres Perman DI1 | Year of manufacture: 2014 Bwedpfxswzb T Us Agtjl

Stanje: rabljeno, Leto izdelave: 2012, Übersicht Dieses Paket von zehn isobaren Edelstahltanks wurde zwischen 2012 und 2024 von der spanischen Firma EtD (Talleres Esteban Tolosa) hergestellt. Es besteht aus sieben Gärbehältern und drei Lagertanks, die alle mit einem Druck von 3 bar ausgestattet sind. Alle Tanks sind in gutem Zustand, voll funktionsfähig und gut gewartet. Die neueren 2024er Modelle wurden nur minimal benutzt. Die Tanks können als komplettes Set oder einzeln auf Anfrage erworben werden. Technische Daten  Typ: Isobare Gär- und Lagertanks Hersteller: EtD (Talleres Esteban Tolosa) Herstellungsjahre: 2012 - 2024 Gesamteinheiten: 10 (7 Gärbehälter + 3 Lagertanks) Arbeitsdruck: 3 bar Material: Edelstahl AISI 304 Lieferumfang  Bodpfxsyb S A Sj Agtowl Gärtanks 3× 45 hL (netto 45, brutto 47) | EtD | 2012 2× 50 hL (netto 50, brutto 55) | EtD | 2024 2× 50 hL (netto 50, brutto 55) | EtD | 2020 Lagertanks 3× 50 hL (netto 50, brutto 55) | EtD | 012 | Horizontal isobar mit Karbonisierungssteinen

Stanje: rabljeno, Leto izdelave: 2015, Overview This tank package was manufactured between 2015 and 2025 by the Spanish companies Inox GC and Magusa, as well as the German company Linde AG. It includes multiple isobaric and atmospheric fermentation tanks, an electric stacker, and a hop torpedo for pressure dry hopping. Technical Specifications & Scope of Delivery Isobaric Fermentation Tank (Unit 1) | Inox GC | — | 2016 | 1,500 L; cylindroconical; isobaric; double cooling jacket Isobaric Fermentation Tank (Unit 2) | Inox GC | — | 2016 | 1,500 L; cylindroconical; isobaric; double cooling jacket Bwedpfxeyb S Dvs Agtol Isobaric Fermenter (Unit 3) | Inox GC | — | 2016 | 1,500 L; cylindroconical; isobaric; double cooling jacket Isobaric Fermenter | Inox GC | — | 2019 | 2,000 L; cylindroconical; isobaric; double glycol jacket Isobaric Fermenter | Inox GC | — | 2021 | 3,000 L; cylindroconical; isobaric; double-wall cooling Atmospheric Fermenter (Unit 1) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket Atmospheric Fermenter (Unit 2) | Magusa | — | 2015 | 1,300 L; atmospheric; double cooling jacket Electric Stacker | Linde AG | L14 | — | Electric; 1,400–1,700 kg lifting capacity

Stanje: rabljeno, Leto izdelave: 2019, Overview This isobaric maturation tank was manufactured by Spadoni in 2019. It is designed for isobaric and isothermal maturation of beverages under pressure, with a working volume of 1,200 L (12 hL) and a total capacity of 1,300 L (13 hL). The tank is PED certified for up to 3 bar and comes equipped with high-quality fittings and insulation. Further details available on request. Technical Details Capacity: Working volume: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Working pressure: 2 bar Housing: 0.49 bar Factory hydrostatic test: 2 bar Certification (PED): 3 bar Material: Stainless steel AISI 304 Insulation: 80 mm polyurethane foam on the cylinder and lower head, covered with stainless steel Finish: Interior: 2B finish with polished welds Exterior: Brushed grain 120 with polished welds Heads: Dished head type (top and bottom) Cooling: Cooling jacket on the cylinder Manhole: Isobaric, Ø400 mm, pressure-rated up to 4 bar Connections & Fittings: 2 lifting lugs Ladder support CIP pipe with upper spray ball and 2x shut-off valves NW40 Discharge valve NW40 with cap and chain Bottom discharge valve NW40 with cap and chain Sight glass level tube (rigid acrylic, with litre scale) Probe connection (PT-100 sensor) Sampling valve Safety valve (calibrated at 3 bar) Mounting: Adjustable feet Bwsdpfx Agowkfwpetsl

Stanje: rabljeno, Leto izdelave: 2002, Overview This tank package was manufactured in 2002 by the Spanish company Parcitank S.A., a recognized producer of stainless steel tanks for the wine and food industry. The nine tanks are suitable for fermentation or storage, depending on their configuration. The set is offered in three packages, each consisting of one 20,000 l fermentation tank, one 15,000 l storage tank, and one 10,000 l storage tank. Single packages can also be purchased on request. All tanks are constructed from AISI 304 stainless steel and are in good condition. Technical specifications Fermentation tanks – 20hl (3 units): Capacity: 20,000 l Diameter: 2,500 mm Cylindrical height: 4,000 mm Type: Atmospheric with cooling jackets Storage tanks – 15hl (3 units): Capacity: 15,000 l Diameter: 2,500 mm Cylindrical height: 3,000 mm Type: Atmospheric Bwjdoxbua Sspfx Agtol Storage tanks – 10hl (3 units): Capacity: 10,000 l Diameter: 2,000 mm Cylindrical height: 3,000 mm Type: Atmospheric Material: Stainless steel AISI 304 Scope of delivery 9 stainless steel tanks (3 × 20 hl, 3 × 15 hl, 3 × 10 hl) Optional: Sale as a complete set or in 3 packages (1 × 20 hl + 1 × 15 hl + 1 × 10 hl)

Stanje: rabljeno, Leto izdelave: 2002, Debelina pločevine: 8Dolžina pločevine: 2000Upogib: 6Premer zgornjega valja: 205Stranski valj: 185Dimenzije (D x Š x V): 3850 x 1550 x 1420Opis: Namestitvena površina: 480/150/150 cm, dolžina valjev – približno 205/20 cm vsak, letnik izdelave 2002. Bwsdpfx Agoy Hymwjtjl

Stanje: novo, Tlak: 250 Hod: 450 Dolžina mize: 1.500 Moč črpalke: 35 Moč motorja: 15 Teža cca: 2.500 Delavniška stiskalnica: Motorno in ročno upravljanje Bwjdpsit E N Usfx Agtjl Bočno pomični valj Črpalka Hema znamke Caproni Manometer Navodila za uporabo CE Proizvedeno v Turčiji Razdalja med stojali: 1.500 x 450 mm

Stanje: novo, Tlak: 60 Prehod med stojali: 900 x 300 Moč motorja: 3 Hitrost: 8 Hitrost: 13 Dimenzije (D x Š x V): 1500 x 850 x 2450 Teža cca: 700 Hod: 300 Standardna oprema: Visokokakovostna hidravlična stiskalnica, ki omogoča ročno in motorizirano upravljanje. Cilindri so nastavljivi bočno. CE-certificirano Regulacija tlaka 1 leto garancije Manometer Uporabniški priročnik (ročni) Bwodpfx Asv Akw Hegtsl Razmik med stojali: 900 x 300 mm

Stanje: novo, Pesto: maks. 450 Vgradna višina: maks. 900 Motor: 22 Kapaciteta črpalke: 48 Polnitev olja: 90 Dimenzije (DxŠxV): 2500x1200x2800 Teža pribl.: 4000 Maks. premer: 330 Tlak: 300 Nastavitev tlaka preko vrtljivega regulatorja Motorizirano upravljanje preko ročne ročice Ročni obroč za pomični cilinder Bwjdpfx Aeutuyvogtel Hidravlika je nameščena spodaj ob strani ogrodja Prosta širina: 1600 mm x 550 mm Gibanje cilindra: 500 mm od sredine na obe strani

Stanje: novo, Moč motorja: 30Moč črpalke: 65Polnjenje olja: 150Dimenzije (D׊×V): 3700x1500x3200Teža pribl.: 5000Batel: Ø 400Tlak: 500 Nastavitev tlaka preko vrtljivega regulatorja Motorizirano upravljanje z ročico Bwsdpeutuy Nefx Agtel Ročni volan za pomični valj Hidravlika nameščena spodaj ob strani okvirja Svetla odprtina: 1600 mm x 550 mm

Stanje: novo, Tlak: 100 Moč motorja: 4 Dimenzije (D x Š x V): 1.600 x 850 x 2.500 Polnjenje z oljem: 29 Moč črpalke: 14,5 Hitrosti: naprej 8,5 mm/s, nazaj 13,43 mm/s Teža ca.: 1.000 Razdalja med stojali: 1000 x 350 Standardna oprema: Visokokakovostna hidravlična stiskalnica, ki jo je mogoče upravljati ročno ali mehansko. Valje je mogoče premikati bočno. CE certifikat Regulacija tlaka 1 leto garancije Manometer Uporabniški priročnik (ročno) Bjdpfx Ajnzwhasgtjwl Opcijsko: Razdalja med stojali: 1200 x 400 mm -> Doplačilo 750 €

Stanje: novo, Tlak: 120Moč motorja: 4Vgradna višina: 1250Hod: 400Dimenzije (D x Š x V): 2.050 x 950 x 2.520Polnjenje z oljem: 29Zmogljivost črpalke: 14,5Hitrosti: naprej 7,70 mm/s, nazaj 12,63 mm/sTeža pribl.: 1.300Valj: 200 Delavniška preša: Bwedpfx Agoiay U Eotol - Motorno in ročno upravljanje - Premični valj - Motorji IE-3 - Črpalka: Hema ali Caproni - CE - Manometer - Navodila za uporabo - Širina stojala: 1250 x 400

Stanje: novo, Tlak: 200 Hod: 400 Dolžina mize: 1.500 Moč črpalke: 27,5 Moč motorja: 9 Teža ca.: 2.100 Delavniška stiskalnica: Motorno in ročno upravljanje Bočno premični valj Bwodjnzwhdopfx Agtsl Črpalka Hema ali Caproni Manometer Navodila za uporabo priložena CE-certificirano Izdelano v Turčiji Svetla širina okvirja: 1500 × 400 mm

Stanje: novo, Tlak: 80 Moč motorja: 3 Vgradna višina: 900 Hod: 300 Dimenzije (D x Š x V): 1.650 x 850 x 2.400 Približna teža: 850 Cilinder: 180 Hitrost: 7,54 Hitrost: 10,90 Standardna oprema: Bwodsicidnjpfx Agtol Kakovostna hidravlična preša, ki se lahko upravlja ročno ali motorizirano. Cilindri so lahko premaknjeni bočno. CE-certificirano Regulacija tlaka 1 leto garancije Manometer Uporabniški priročnik (tiskan) Širina stojala: 900 x 300 mm Slika je simbolična.

Stanje: novo, Hub: max. 450 Vgrajena višina: max. 900 Moč motorja: 22 Moč črpalke: 48 Polnjenje olja: 120 Dimenzije (D׊×V): 3300×1250×2900 Teža pribl.: pribl. 4200 Premer valja: Ø 360 Tlak: 400 - Nastavitev tlaka preko vrtljivega regulatorja - Motorizirano upravljanje s pomočjo ročice - Ročno premičen valj - Svetla odprtina: 1600 × 550 mm - Zvezda-trikotno stikalo za pogon motorja - Hidravlični rezervoar skupaj z motorjem je nameščen ob strani spodaj na ogrodju Možnosti / dodatna oprema (doplačila): - Ventil za regulacijo tlaka: 400,00 € - Ventil za regulacijo hitrosti: 400,00 € - Varnostni zapor za bat: 250,00 € Bjdpfx Aeutuy Ajgtewl - Ročni volan za premični valj: 950,00 € - Valj premičen preko menjalnega motorja: 1.700,00 € - Podložna plošča mize (1300 × 850 × 150 mm): 3.300,00 € *Vse slike so namenjene izključno ponazoritvi in so simbolne fotografije. Dejanska oprema se lahko nekoliko razlikuje*

Stanje: dober (rabljeno), Nagel Foldnak Compact izdelovalec brošur s obrezovalnikom Stroj je v delujočem stanju in pripravljen za proizvodnjo. Zelo dobro ohranjen. Stroj splete na dveh točkah in prepogne na pol, da ustvari končano brošuro, medtem ko rezalni nož odreže sprednji rob brošure. Opis: – Običajno spenjanje in opcijsko zanko spenjanje (standardne sponke, ekonomično za uporabo) – Nastavljive glave – Možnost izklopa spenjanja ali zgibanja (npr. samo šivanje) – Proženje s pritiskom na gumb ali fotocelico – Števec kopij – Stranska in sprednja poravnava – Indikator za sponke – Format SRA3 – 230V napajanje Podpira nestandardne formate. Bwodpfsy Hgi Eox Agtel

Stanje: novo, Pressure: 320 Bending length: 6050 mm Frame gap: 5100 mm Installation height: 650 mm Max. stroke length: 350 mm Throat depth: 450 mm Weight approx.: 23,100 kg 4 Axes (Y1, Y2, X, R): Yes, all axes controlled via Esa S630 (2D graphic control) CNC crowning via control: Yes, with Esa S630 (2D graphic control) Motor power: 30 kW Technical Specifications XL 60320 Unit Bending Length: 6050 mm Bending Force: 320 t Approach speed: 80 mm/sec Bending speed: 10 mm/sec Return speed: 80 mm/sec Stroke: 350 mm Open height (D): 650 mm Throat depth (E): 450 mm Distance between housings (B): 5100 mm Length (L): 6865 mm Width (W): 2280 mm Width without front gauge (Y): 1760 mm Maximum height: 3110 mm Main motor: 30 kW Hydraulic oil tank: 400 l Weight: 23,100 kg The robust EUROPA XL press brake stands out due to its high precision, accuracy and versatile range of applications. Europa XL offers an extremely large open height, resulting in an extended stroke (ram travel). The extra-large throat depth allows for maximum working space with minimum restrictions. We set a high value on quality, which is also reflected in the control system. Our standard solution features the high-quality Esa S640 (2D graphic control). Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X and R, all controlled via the Esa S640 system. Of course, CNC crowning control via Esa S640 (2D graphic control) is also included. When it comes to upper tools and dies, we make no compromises. The CNC press brake KKI EUROPA XL comes equipped with premium tooling from EUROSTAMP (Italy).Naturally, every machine is only as good as the service that comes with it. For this reason, we emphasize highly qualified staff with extensive experience in CNC sheet metal processing. Features: CNC axes: Y1, Y2, X, R Esa S640 (2D graphic control) Backgauge with double linear guides and ball screw Motorized CNC crowning device Heavy-duty stroke adjustment with handwheel; fully guided on linear rails from 175 t Laser safety device on upper beam CE-certified safety equipment Various options available Additional controller options: Bsdpfx Aed Ehh Tsgtjwl ESA 640 2D 15" touchscreen control (included) ¤ 4.520,-- ESA 675 W 3D 21" touchscreen control (Windows based) ¤ 6.485,-- DELEM 66 T 2D 17" touchscreen control (Windows based) ¤ 10.165,-- DELEM 69 T 3D 17" touchscreen control (Windows based) ¤ 16.350,-- KK-Industries GmbH There is something for everyone!

Stanje: novo, x-axis travel: 3000 mm y-axis travel: 2000 mm z-axis travel: 250 mm Pump power for flushing: 37 kW Control system: Siemens PLC touch screen, directly usable DXF files Output pressure: max. 5500 bar Abrasive feed system for waterjet cutting machines – fill weight 350 kg OMAX vacuum sensor to monitor abrasive supply to the nozzle Sensor for monitoring pump pressure In waterjet cutting, water is compressed to pressures of up to 5500 bar. Depending on the requirement and the workpiece, this is then forced through a nozzle with a diameter between 0.01 and 0.08 mm. As the waterjet technology processes materials without heat input, no deformations occur. By adding an abrasive, waterjet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible manufacturing allows for both vertical and angled cuts. We are happy to accept your individual CAD data. Waterjet technology offers great advantages for industry, trades, and custom prototype production. It also scores points in terms of environmental impact, as the waterjet process operates dust- and steam-free and is material-efficient. Waterjet Cutting: Sample Gallery What already sounds impressive in theory is even more remarkable on the finished object. We have compiled a selection of images to demonstrate our capabilities with waterjet cutting. Browse through our sample gallery to get an impression of the possibilities offered by this modern machining process. Waterjet will also find the right solution for your project! Advantages - No deformations in the cut area - Cutting without thermal influence - Material-saving - High precision: +/- 0.1 mm - Cutting area: x = 3010 mm; y = 2010 mm; z = 250 mm - Flexible manufacturing Bwodjhqnl Tjpfx Agtsl - Vertical and angled cuts - Acceptance of your CAD data formats: DXF, DWG, IGES, STP, STEP, PRT, JPT, JAM - Environmentally friendly, steam- and dust-free We cut everything All materials formed to shape: - Aluminum - Steel - Brass - Copper & bronze - Other precious metals - Glass - Granite & marble - Tiles - Composites - Promat cutouts - Rubber - Plastics - Plexiglass Optional: Oil cooler ..... €10,725.00 Water filter system..... €1,430.00 Sludge extraction system ..... €10,725.00 Professional water treatment system..... €10,725.00 An oil cooler must be present during commissioning!!! Necessary for operation longer than 1 hour. Further videos:

Stanje: novo, Stroke length (max.): 400 mm Pump capacity: 45 cc – 65 L/min Motor: 22 kW (IE-3) Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Table area: 3500 mm x 2000 mm Clear width: 2200 mm Bridge travel: 2800 mm Return speed: 50 mm/sec Dimensions (LxWxH): 3500 x 3200 x 3600 mm Cylinder: Ø 370 mm – Capacity: 3000 kN (280 bar – 300 ton) Key Specifications: - Cylinder diameter: Ø 370 mm - Table dimensions: 3500 x 2000 mm (clear width: 2200 mm) - Load-bearing surface: 3000 x 2000 mm - Bridge travel: 2800 mm - Lateral cylinder travel: 900 + 900 mm from center (total 1800 mm) - Maximum installation height: 1200 mm (distance from table or cover plate to cylinder piston WITHOUT mandrels) - Stroke length: 400 mm - Motor: 22 kW (IE-3) Bwedpfor Etulex Agtel - Pump: 45 cc – 65 L/min (KAWASAKI) - Forward speed: 10 - 5 mm/sec - Return speed: 50 mm/sec - Table height: 750 mm (without cover plate) – 820 mm (with cover plate) Equipment: - Hydraulics: DUPLOMATIC - Control: Siemens S7-1200 - BEIJER 7'' display - Control cabinet mounted to side wall of bridge - Swivel operator panel - Pressure adjustable via display (50 – 300 ton) - Speed adjustable via throttle valve - Cylinder with chrome plating - Wired remote control - Stroke length adjustable via distance sensors - 400 V, 50 Hz, 3 phase power supply - Anti-rotation lock for cylinder - Lateral movement of cylinder via drive motor - Bridge movement via drive motor - Bridge area safeguarded by light curtain (Datalogic) - Cylinder mandrels: Ø 200 / 400 / 600 mm, in length - 3 extension mandrels included (Example photo)