Klet Opažev nakup rabljenega (794)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
mali oglas
Avstrija
226 km
Hidravlične stiskalnice
KK KletzerPortal Richtpresse 300 to
Klic
Stanje: novo, Stroke length (max.): 400 mm
Pump capacity: 45cc - 65 l/min
Chedpjr D U I Djfx Afqjf
Motor: 22 kW
Table height: (without support plate) 750 mm – (with support plate) 820 mm
Table area: 3000 mm x 2000 mm – Clearance: 2200 mm
Bridge travel: 2300 mm
Motor: (IE-3) 22 kW
Return speed: 50 mm/sec
Capacity: 3000 kN (280 Bar – 300 tons)
- Cylinder: Ø 370 mm
- Table area: 3000 x 2000 mm – Clearance: 2200 mm
- Bridge travel: 2500 mm
- Cylinder lateral travel: 900 + 900 mm from center (1800 mm total)
- Installation height: max. 1200 mm (distance table or support plate to cylinder ram) WITHOUT MANDRELS
- Stroke length: 400 mm
- Pump: 45cc – 65 l/min
- Advance speed: 10 - 5 mm/sec
- Return speed: 50 mm/sec
- Motor: 22 kW (IE-3)
- Table height: 750 mm (without support plate) – 820 mm (with support plate)
Accessories:
- Hydraulics: DUPLOMATIC
- Controls: LENZE & SCHNEIDER
- Control cabinet mounted on the side of the bridge
- Pressure adjustable via rotary control valve
- Speed adjustable via throttle valve
- Cylinder with chrome plating
- Remote control (with cable)
- Stroke adjustable via distance sensors
- 400 V 50 Hz 3-phase
- Rotary lock for cylinder
- Cylinder laterally adjustable via drive motor
- Bridge position adjustable via drive motor
- Soft starter for motor
- Cylinder ram mandrels: Ø 200 / 400 / 600 mm long
- Extension mandrels (3 pcs.) included
mali oglas
Avstrija
226 km
Vodoravni stroj za upogibanje / kotni upogibalnik
KK KletzerBiegemaschine Horizontal / Winkelbieger UHP 50
Klic
Stanje: novo, Oil tank capacity: 60 L
Bending capacity (flat material): 300 x 15 mm
Bending capacity (round tubes): 76 x 4.0 mm
Pressure: 50 t
Working speed: 10 mm/s
Csdpfsr I H A Uox Afqjhf
Return speed: 10 mm/s
Motor: 5.5 kW
Table size: 600 x 1250 mm
Working height: 930 mm
Length: 1400 mm
Width: 600 mm
Height: 1500 mm
Stroke: 285 mm
Approx. weight: 1050 kg
UZMA hydraulic horizontal presses with multidirectional function are suitable for pipes, flat bars, profiles, rods, and all types of materials, enabling a wide range of operations such as bending, punching, straightening, etc. Thanks to the quick tool change system, you can rapidly bend materials like sheet metal, pipes, profiles, and bars with suitable dies, all without any time loss. The versatile operating functions and ease of use are hallmarks of UZMA.
A horizontal press machine is an indispensable piece of equipment for metalworking companies.
Standard accessories:
- Standard accessories
- Steel frame and robust machine design
- Stroke adjustment via digital display
- Manual or automatic working mode
- Easy tool change with quick-change system
- Durable tool and guide construction from high-quality, hardened steel
- Foot pedal with digital display and emergency stop
- 1 set of press brake tools
mali oglas
Avstrija
226 km
Vodoravni stroj za upogibanje / kotni upogibalnik
KK KletzerBiegemaschine Horizontal / Winkelbieger UHP 80
Klic
Stanje: novo, Oil tank capacity: 120
Bending capacity (flat material): 320 x 15
Bending capacity (round tubes): 114 x 8
Pressure: 80
Working speed: 10
Return speed: 10
Motor: 10
Table surface: 750 x 1425
Working height: 930
Length: 1430
Width: 750
Height: 1450
Weight approx.: 1700
Stroke: 285
UZMA hydraulic horizontal presses with multidirectional functionality enable a wide range of operations such as bending, punching, straightening, etc. on pipes, flat bars, profiles, rods and all kinds of materials. With the quick-change tooling system, materials such as sheet metal, pipes, profiles, and rods can be bent rapidly using appropriate dies, minimizing downtime. UZMA stands out for its versatile operation modes and user-friendly controls.
Chedor I H Dcjpfx Afqsf
A horizontal press is an essential machine for metalworking shops.
Standard accessories:
- Standard accessories
- Steel frame and robust machine design
- Stroke adjustment with digital display
- Manual or automatic operation mode
- Easy tool change with quick-change system
- Durable tooling and guides made of high-quality, hardened steel
- Foot pedal with digital display and emergency stop
- 1 set of bending tools

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
mali oglas
Avstrija
226 km
Hidravlične enostebrne stiskalnice
KK KletzerPCR 100
Klic
Stanje: novo, Pressure: 100Stroke: 500Table surface: 800 x 600Installation height: 615Rapid advance: 26Working speed: 4Motor: 4Dimensions (L x W x H): 1600 x 900 x 2300Weight approx.: 3100Features:Two-stage hydraulic pump – compactly integrated into the machine frame
Lever and button control – with safe two-hand operation
Cylinder stroke: 500 mm – allows versatile applications
Chsdpfswwxz Uox Afqsf
Milled working table (lower) – robust and precisely manufactured
Two working speeds – for both fast and precise work
Adjustable maximum pressure – individually adaptable to the application
Integrated manometer – for precise monitoring of working pressure
mali oglas
Avstrija
226 km
Tlačne zavore CNC
KK KletzerCNC Abkantpresse KKI EUROPA XL 3020 mm x 220 to, Y
Klic
Stanje: novo, Pressure: 220
Bending length: 3,020 mm
Frame gap: 2,550 mm
Installation height: 600 mm
Stroke (max.): 350 mm
Throat depth: 450 mm
Dimensions (LxWxH): 3,745 x 2,290 x 3,055 mm
Weight approx.: 11,250 kg
4 axes (Y1, Y2, X, R): Yes, all axes controlled via Delem DA 66 (2D graphical control)
CNC crowning via control unit: Yes, via Delem DA 66 (2D graphical control)
Motor power: 22 kW
Standard equipment:
KK Kletzer Europa
We have assembled a high-quality model for the European market.
The CNC press brake KK-Industries made by DENER:
Codod Edhlopfx Afqjhf
Model: KK Kletzer EUROPA XL
The powerful EUROPA XL press brake stands out due to its high precision, accuracy, and versatile application options.
The EUROPA XL offers a very generous installation height, allowing for an extended stroke (cylinder travel).
The throat depth is also above average to ensure maximum application flexibility.
We place high importance on quality, which is also reflected in the control system.
As standard, the machine is equipped with the high-quality Esa S640 (2D graphical control interface).
In addition, the KKI EUROPA XL press brake features CNC-controlled Y1, Y2, X, and R axes.
Of course, CNC crowning is also included via the Esa S640 (2D graphical control).
We make no compromises on the upper tooling and die; the CNC press brake KKI EUROPA XL is equipped with top-tier tooling from EUROSTAMP Italy.
Naturally, a machine is only as good as its service. For this reason, we place great emphasis on highly qualified staff with long-standing experience in CNC sheet metal processing.
CNC axes Y1, Y2, X, and R
Esa S 640 (2D graphical control)
Backgauge with double linear guideways and ball screw spindle
Motorized crowning system with CNC control
Heavy-duty height adjustment with handwheel, heavy-duty linear guide system starting from 175 t
Laser safety system on the upper beam
CE safety equipment
Various options available
Other control options:
ESA 640 2D 15'' touchscreen control — ¤ 4,520 incl.
ESA 675 W 3D 21'' touchscreen control (Windows-based) — ¤ 6,485
DELEM 66 T 2D 17'' touchscreen control (Windows-based) — ¤ 10,165
DELEM 69 T 3D 17'' touchscreen control (Windows-based) — ¤ 16,350
KK-Industries GmbH
There is something here for everyone!
mali oglas
Avstrija
226 km
Hidravlične giljotinske škarje CNC
KK KletzerCNC Tafelschere KK kletzer AS 3010
Klic
Stanje: novo, Sheet length: 3040 mm
Sheet thickness: 10.0 mm
Total power requirement: 22 kW
Weight approx.: 10.5 t
Dimensions (LxWxH): 3850x2960x2160 mm
Our powerful brand KKI CNC GUILLOTINE SHEAR, swing beam design,
Model AS 3010, has everything you need for perfect cutting.
KKI CNC swing beam shear:
Thanks to its robust and durable mechanics and hydraulics, precise CNC-controlled backgauge with ball screw drive, and user-friendly CNC control, Dener guillotine shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Of course, higher sheet thicknesses and cutting lengths are also possible upon customer request.
Dener guillotine shears owe their long service life to their particularly rugged design with a fully welded frame. The entire machine body, cutting beam, and backgauge are resistant to torsion and deformation, ensuring the highest cut quality.
By entering sheet thickness and material type, the CNC controller automatically calculates the necessary cutting angle and blade gap.
Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design, Model AS 3010, has everything you need for perfect cutting.
Technological Advantages:
- Fast and precise cuts
- Stable, long-lasting frame construction
- Automatic blade gap adjustment
- Easy operation
- Low maintenance costs
- High safety standards
- Use of components from renowned manufacturers
- Low cost per part
With our patented blade support system, we can finely adjust and stabilize the upper blade, ensuring precise, high-quality cuts. This prevents so-called banana cuts.
Technical Data:
- Sheet thickness: 10 mm
- Cutting length: 3,040 mm
- Cutting angle: 0.5 – 3°
- Number of hold-downs: 17
- CNC-controlled backgauge: 1,000 mm
- Motor power: 22 kW
- Cutting speed (0.5–3°): 20–11 (cuts/min)
- Throat depth: 350 mm
- Oil tank: 300 liters
Csdped Ed Ttsfx Afqehf
- Length: 3,800 mm
- Width: 2,320 / 2,960 mm
- Height: 2,160 mm
- Weight: 10,500 kg
• Swing beam design
• CNC control
- Backgauge
- Cutting angle
- Blade gap
- Cutting length
• Ball screw drives for the backgauge
• Ball transfers on table
• 1,500 mm side gauge
• 2 support arms, each 1,000 mm
• Cutting line illumination
• 1,000 mm foldable finger guard
Optional pneumatic sheet support system, EUR 6,320
We have numerous references!
mali oglas
Avstrija
226 km
Hidravlične giljotinske škarje CNC
KK KletzerCNC Tafelschere KK kletzer AS 3006
Klic
Stanje: novo, Sheet length: 3035 mm
Sheet thickness: 6.0 mm
Total power requirement: 11 kW
Weight approx.: 8.3 t
Dimensions (LxWxH): 3775x2955x2260 mm
Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design
Model AS 3006 offers everything you need for perfect cutting.
CNC swing beam guillotine shear KKI
Thanks to a robust and durable mechanical and hydraulic system, a precise CNC backgauge with ball screw, and user-friendly CNC control, Dener guillotine shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm up to 20 mm and cutting lengths from 3 m to 6 m are part of our standard portfolio. Naturally, higher sheet thicknesses and longer cutting lengths are also available upon customer request.
The exceptionally durable construction with a fully welded frame is the reason for the long service life of Dener guillotine shears. The machine body, cutting beam, and backgauge are all resistant to torsion and deformation, ensuring the highest quality of cut.
By inputting sheet thickness and material type, the CNC control system automatically calculates the required cutting angle and gap.
Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design, Model AS 3006, provides everything required for precise cutting.
Technological advantages:
- Fast and precise cutting
- Stable and long-lasting frame design
- Automatic adjustment of cutting gap
- Easy operation
- Low maintenance costs
- High safety standards
- Use of components from renowned manufacturers
- Low unit costs
Our strong brand KKI
CNC GUILLOTINE SHEAR, swing beam design
Model AS 3006, everything you need for perfect cutting.
With our patented blade support system, the upper blade can be finely adjusted and stabilized, ensuring precise, high-quality cuts and eliminating so-called banana cuts.
Technical specifications:
Sheet thickness: 6 mm
Cutting length: 3,035 mm
Cutting angle: 0.5 - 3°
Number of hold-downs: 15
Backgauge: 1,000 mm (CNC controlled)
Motor power: 11 kW
Cutting speed (0.5–3°): 29–12 (cuts/min)
Throat depth: 350 mm
Oil tank: 200 liters
Chsdjd Egq Ajpfx Afqef
Length: 3,775 mm
Width: 2,300 / 2,955 mm
Height: 2,260 mm
Weight: 8,300 kg
• Swing beam design
• CNC control for:
- Backgauge
- Cutting angle
- Cutting gap
- Cutting length
• Ball screws for the backgauge
• Balls in the table
• Side gauge 1,500 mm
• 2 support arms 1,000 mm each
• Cutting line illumination
• 1,000 mm foldable finger guard
Optional pneumatic sheet support, EURO 6,320
We have many references!
mali oglas
Avstrija
226 km
Hidravlične giljotinske škarje CNC
KK KletzerCNC Tafelschere KK kletzer AS 4020
Klic
Stanje: novo, Sheet length: 4065 mm
Sheet thickness: 20.0 mm
Total power requirement: 37 kW
Approximate weight: 27,000 kg
Dimensions (LxWxH): 4950 x 3390 x 2570 mm
Our strong brand KKI CNC GUILLOTINE SHEAR Sliding Beam Design
Model AS 4020 includes everything needed for perfect cutting.
KKI CNC sliding beam-guided guillotine shear
Thanks to its robust and durable mechanical and hydraulic design, precise back gauge with ball screw, and user-friendly CNC control, Dener guillotine shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Naturally, greater sheet thicknesses and cutting lengths are available upon request.
Dener shears owe their long service life to their particularly rugged design with a fully welded frame. The entire machine body, cutting beam, and back gauge are resistant to twisting and deformation, ensuring maximum cutting quality.
By entering the sheet thickness and material type, the CNC control automatically calculates the required cutting angle and blade gap.
Our premium brand KKI CNC GUILLOTINE SHEAR Sliding Beam Design
Model AS 4020 is equipped with all the features needed for perfect cutting.
Technological Advantages:
- Fast and precise cuts
- Stable, durable frame construction
- Automatic blade gap adjustment
- Easy operation
- Low maintenance costs
- High safety standard
- Use of components from renowned manufacturers
Chsdpfxsd Ehh Ie Afqsf
- Low unit costs
Our Strong Brand KKI
CNC GUILLOTINE SHEAR Sliding Beam Design
Model AS 4020 has everything you need for perfect cutting.
With our patented blade support system,
we can finely adjust and stabilize the upper blade,
ensuring precise, high-quality cuts.
This prevents the so-called banana cut.
Technical Data:
- Sheet thickness: 20 mm
- Cutting length: 4,065 mm
- Cutting angle: 0.5 - 3°
- Number of hold-downs: 26
- Back gauge: 1,000 mm via CNC
- Motor power: 37 kW
- Cutting speed (0.5 - 3°): 12-5 cuts/min
- Throat depth: 350 mm
- Oil tank capacity: 700 liters
- Length: 4,950 mm
- Width: 2,400 / 3,390 mm
- Height: 2,570 mm
- Weight: 27,000 kg
Equipment:
- Sliding beam design
- CNC control
- Back gauge
- Cutting angle
- Blade gap
- Cutting length
- Ball screws for back gauge
- Balls on the table
- Side gauge 1,500 mm
- 2 support arms, each 1,000 mm
- Cutting line illumination
- 1,000 mm foldable finger guard
Optional pneumatic sheet support: EUR 8,420
We have numerous references!
mali oglas
Avstrija
226 km
Tlačne zavore CNC
KK KletzerCNC Abkantpresse KKI EUROPA XL 4050 mm x 220 to, Y
Klic
Stanje: novo, Pressure: 220
Bending length: 4050 mm
Frame width: 3550 mm
Installation height: 600 mm
Stroke length (max.): 350 mm
Throat depth: 450 mm
Dimensions (LxWxH): 4740 x 2290 x 3050 mm
Approx. weight: 13,350 kg
4 Axes (Y1, Y2, X, R): Yes, all axes operated via Esa S630 (2D graphic control)
CNC crowning controlled via CNC: Yes, via Esa S630 (2D graphic control)
Motor power: 22 kW
Standard equipment:
CNC press brake
We have assembled a high-quality model for the European market.
The CNC press brake KK-Industries in Turkey
Model: KKI EUROPA XL
The heavy-duty EUROPA XL press brake stands out for its high precision, accuracy, and versatile application possibilities.
The Europa XL features a very large installation height, enabling an extended stroke (ram travel).
The generous throat depth minimizes workpiece restrictions.
We focus on quality, which is also reflected in the control system.
Our standard controller is the high-quality Esa S640 (2D graphic control).
Furthermore, the KKI Europa XL press brake is equipped with CNC axes Y1, Y2, X, and R, all managed via the controller.
Of course, CNC crowning with the Esa S640 (2D graphic control) is included as standard.
We make no compromises regarding the upper tool and die, equipping the KKI EUROPA XL CNC press brake with top-quality tools from EUROSTAMP Italy.
Naturally, a machine is only as good as the service provided. For this reason, we emphasize highly qualified staff with many years of experience in the CNC sheet metal processing sector.
CNC Axes: Y1, Y2, X, and R axes
Esa S640 (2D graphic control)
Backgauge with double linear guide and ball screw drive
Motorized CNC-controlled crowning system
Heavy-duty model, height adjustment by handwheel; from 175 to features heavy-duty linear guide execution
Laser safety device on the upper beam
CE safety equipment
Various options available
Additional controllers:
ESA 640 2D 15'' touchscreen controller € 4,520 incl.
ESA 675 W 3D 21'' touchscreen controller (Windows-based) € 6,485
Chodjd Ehicopfx Afqjf
DELEM 66 T 2D 17'' touchscreen controller (Windows-based) € 10,165
DELEM 69 T 3D 17'' touchscreen controller (Windows-based) € 16,350
KK-Industries GmbH
There’s something for everyone!
mali oglas
Avstrija
226 km
Tlačne zavore CNC
KK KletzerCNC Abkantpresse KKI EUROPA XL 2600 mm x 100 to, Y
Klic
Stanje: novo, Pressure: 100Bending length: 2600 mmFrame width: 2150 mmInstallation height: 530 mmStroke length (max.): 300 mmThroat depth: 450 mmDimensions (LxWxH): 3320x2260x2780 mmApproximate weight: 7900 kg4 axes (Y1, Y2, X, R): Yes, all axes controlled via ESA S630 (2D graphical control)CNC crowning via control: Yes, via ESA S630 (2D graphical control)Motor power: 11 kW
Standard equipment:
KK Kletzer Europa
We have assembled a high-quality model for Europe.
The KKI Europa XL CNC press brake, made in Turkey.
Model KKI EUROPA XL
The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile range of applications.
The Europa XL features a very large installation height, which results in a long stroke (ram travel).
The throat depth is also above average, minimizing restrictions in use.
We focus on quality, reflected in the control system as well.
Our standard control unit is the premium ESA S640 (2D graphical control).
Additionally, the KKI Europa XL is equipped with CNC Y1, Y2, X, and R axes via the control unit.
Of course, CNC crowning via the ESA S640 (2D graphical control) is also included.
We make no compromises on the upper tool and die, equipping the KKI EUROPA XL CNC press brake with high-quality tools from EUROSTAMP Italy.
Naturally, a machine is only as good as its service. That is why we emphasize highly qualified staff with extensive experience in CNC sheet metal processing.
CNC axes Y1, Y2, X, and R
Chjdpfxjd En Ryo Afqsf
ESA S640 (2D graphical control)
Backgauge with double linear guides and ball screw
Motorized crowning with CNC control
2 heavy-duty front support arms, height-adjustable with handwheel (from 175 tons: heavy-duty version on linear guides)
Laser safety system on the upper beam
CE safety equipment
Various options available
Additional controls:
ESA 640 2D 15'' touchscreen control ----- € 4,520 incl.
ESA 675 W 3D 21'' touchscreen control (Windows base) ----- € 6,485
DELEM 66 T 2D 17'' touchscreen control (Windows base) ----- € 10,165
DELEM 69 T 3D 17'' touchscreen control (Windows base) ----- € 16,350
KK-Industries GmbH
There is something for everyone here!
mali oglas
Avstrija
226 km
Hidravlične vrtljive škarje za plošče
KK KletzerNC Tafelschere Schwingschnitt KK kletzer BS 4113
Klic
Stanje: novo, Sheet length: 4120 mm
Sheet thickness: 13.0 mm
Total power requirement: 30 kW
Approx. weight: 16,750 kg
Dimensions (LxWxH): 4930x3160x2100 mm
Our strong brand KK Kletzer NC GUILLOTINE SHEAR with swinging beam design, Model BS, has everything you need for cutting operations.
Technological Advantages:
- Fast and precise cuts
- Robust, durable frame construction
- Easy operation
- Low maintenance costs
- High safety standard
- Use of components from renowned manufacturers
- Low unit costs
Technical Data:
Sheet thickness: 13 mm
Cutting length: 4,160 mm
Cutting angle: 2°
Number of hold-downs: 19
Backgauge: 1,000 mm (CNC-controlled)
Motor power: 30 kW
Cutting speed: 8 cuts/min
Throat depth: 150 mm
Oil tank: 400 liters
Length: 4,930 mm
Width: 2,345/3,160 mm
Height: 2,100 mm
Weight: 16,750 kg
• Robust swing beam shear design
• Blade gap adjustment via control system
- Backgauge
- Blade gap
- Cutting length
• Ball screw for backgauge
• Balls embedded in the table
• Side gauge 1,500 mm
• 2 support arms, each 1,000 mm
• Cutting line illumination
Cedpfxsd Eqrdj Afqjhf
• 1,000 mm upward folding finger guard
Optional pneumatic sheet support: EUR 8,420
We have many references!
mali oglas
Avstrija
226 km
Montažna miza brez nastavitve višine
KK KletzerMontagetisch SMT 80/12 S FIX 1480x980
Klic
Stanje: novo, Dimensions (LxWxH): 1480 x 980 x 800
Width: 980 mm
Length: 1480 mm
Approx. weight: 231 kg
Welding and assembly tables from the SMT fix series are robust, everyday workstations designed for handling heavy workpieces, operating electric tools, or working with chemical and oily substances. The solid steel worktop, up to 20 mm thick, can withstand heavy impacts and blows—such as those that often occur when working with heavy hand tools or handling very heavy metal workpieces—without suffering permanent deformation or indentations.
Chedpfofk Aiajx Afqsf
The metal worktop enables unrestricted use of magnetic clamps for securing components. Thanks to its substantial weight, this universally applicable table provides sufficient stability against tipping, even with heavy items or tools placed on it, despite its 800 mm working height. The table below (Table 3) provides an overview of the available standard models.
For accessories and further information, please follow this link:
mali oglas
Avstrija
226 km
3 D sistemi varilnih miz brez nastavitve višine
KK KletzerSchweißtisch SWT 80/16 XSL Ø28 Fix 1980x1480
Klic
Stanje: novo, Table height: 800 mm
Dimensions (LxWxH): 1980 x 1480 x 800
Table width: 1480 mm
Table length: 1980 mm
Approx. weight: 530 kg
Special worktable systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for efficient assembly, welding, and bonding constructions, e.g., jigs, railings, frames, etc. With the help of the comprehensive range of clamping accessories (see catalog section 'Welding Table Accessories'), these table systems can also be used as flexibly configurable fixtures, allowing for high-quality production of small and medium batch sizes.
The special worktables feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, equipped with a Ø28 mm hole grid. In addition, the table top has a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The table perforation allows the use of various clamping elements and positioning aids. For special applications, the tabletop surface can also be optionally fitted with stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70, deviating from the standard.
Thanks to the fully bolted construction of the clamping plate, the work surface can be replaced cost-effectively if it becomes worn over time. This ensures the table system remains particularly sustainable for long-term use.
Chedpfefk Aiqox Afqof
Price must be requested from the manufacturer prior to ordering!!
For accessories and further information, please follow this link:
mali oglas
Avstrija
226 km
Sistemi varilnih miz 3 D z nastavitvijo višine
KK KletzerSchweißtisch SWT 65-105/16SL Ø16 Flex 1950x950
Klic
Stanje: novo, Table height: 650 – 1050 mm
Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm
Table width: 950 mm
Table length: 1950 mm
Approx. weight: 490 kg
This enables the user to flexibly adjust the working surface height according to the specific requirement, improving efficiency and ergonomics. The height adjustment is performed as standard by a manual hydraulic system within the range of 650 – 1050 mm (other heights available on request). Like the SST fix series, the tabletop features a 100 x 100 mm grid with Ø 28 mm holes. When used in combination with processing machines, inspection or finishing fixtures (deburring, marking, inspection) can be adapted to the clamping table height of the machine. The table systems are easily moved on site using a pallet truck. These mobile systems have proven ideal, with various mounting and securing options, for the maintenance of injection moulding and die casting tools. Once removed from the machine, the tools can be safely serviced on site and transferred to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of future wear.
Csdpfx Afsfk E D Doqohf
Price must still be confirmed with the manufacturer prior to ordering!
For accessories and further information, please follow this link:
mali oglas
Avstrija
226 km
Montažna miza z nastavitvijo višine
KK KletzerMontagetisch SMT 65-105/12 XSL FLEX 1980x1480
Klic
Stanje: novo, Dimensions (LxWxH): 1980 x 1480 x 65 to 105 mm
Chjdjgrz Tdepfx Afqef
Width: 1480 mm
Length: 1980 mm
Weight approx.: 575 kg
Welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for processing heavy workpieces, handling electrically powered tools, or working with chemical and oily substances. Thanks to transport handles on the base, the tables can be easily relocated with a pallet truck and the height can be smoothly adjusted to different working levels. The height adjustment range covers 650 mm to 1,050 mm (lower working heights available upon request).
The solid steel worktop, up to 20 mm thick, can withstand heavy impacts and blows—such as those that commonly occur when using heavy hand tools or handling very heavy metal workpieces or tools—without sustaining lasting deformations or notches. The metal worktop allows unrestricted use of magnetic clamps for securing components. Due to its high dead weight, this universally applicable table provides excellent stability and safety against tipping, even when loaded with heavy objects or tools at the maximum working height.
For accessories and further information, please follow this link:
mali oglas
Avstrija
226 km
Sistemi varilnih miz 3 D z nastavitvijo višine
KK KletzerSchweißtisch SST 65-105/16XS Ø28 Flex 1480x1480
Klic
Stanje: novo, Table height: 650 - 1050 mm
Dimensions (LxWxH): 1480 x 1480 x 650 to 1050 mm
Table width: 1480 mm
Chodpfjgrz Tlox Afqef
Table length: 1480 mm
Weight approx.: 464 kg
This system allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving efficiency and ergonomics. The height adjustment is standardly performed via a manual hydraulic mechanism in the range of 650 – 1050 mm (other ranges available upon request). The table systems can be easily relocated on-site using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for maintenance of injection molding and die-casting tools. Immediately after removal from the machine, the tools can be safely serviced on site and transported for repairs to maintenance. Thanks to the fully bolted construction of the clamping plate, the working surface can be replaced cost-effectively in case of later wear. The following Table 2 provides an overview of the available standard models.
Price must be reconfirmed with the manufacturer before ordering!!
mali oglas
Avstrija
226 km
Stroji
KK KletzerCNC Abkantpresse KK kletzer XF 30120 3 Achsen Y1-Y
Klic
Stanje: novo, Leto izdelave: 2022, Dimensions (LxWxH): 3660 x 1340 x 2500 mm
Number of Axles: 3
Pressure: 120 tons
Weight approx.: 7000 kg
Oil Capacity: 200 liters
Motor Power: 11 kW
Press Brake Control Unit: Esa S 630 CNC 10, 2D graphic touchscreen
Control Unit Operator Panel: Swiveling pendant arm
Optional Hydraulic Press Brake Valve: With CE safety signals
Press Brake Safety PLC: Mcs PLC safety logic controller
Chjdpfxshut Aaj Afqjf
Press Brake Laser Safety System: DSP-AP safety block (manual laser height adjustment)
Press Brake Backgauge: X-axis, 500 mm reach, manual adjustment, includes 2 fingers, adjustable in height and lateral position
Backgauge Stop Fingers: Standard
Rear and Side Guards: Installed (CE-compliant model)
Press Brake Upper Tool Clamping: Manual European type, 150 mm (Promecam)
Upper Tool for Press Brake: Eurostamp 1260 / Standard (835 mm and 805 mm, split into 595 mm and 210 mm)
Lower Die Holder for Press Brake: Mechanical European type, standard width (Promecam)
Press Brake Crowning: CNC-adjustable motorized crowning (V-axis)
Lower Die for Press Brake: Eurostamp 2067 / Standard (835 mm and 805 mm, split into 100 mm left, 395 mm, 210 mm, and 100 mm right)
Press
Front Support for Press Brake: XF front support
Front Support for Press Brake: 2 supports, manually adjustable in height and lateral position
Electrical System: 380 V–660 V, 50–60 Hz, 3 phase (IE3)
Cabinet Cooling System: Fan ventilation
Number of Foot Pedals: One
Label Group: English Label Group
Packaging Method: Plastic cover with stretch film
mali oglas
Avstrija
226 km
Delavniške stiskalnice
KK KletzerWerkstattpresse 80 to
Klic
Stanje: novo, Tlak: 80
Moč motorja: 3
Vgradna višina: 900
Hod: 300
Dimenzije (D x Š x V): 1.650 x 850 x 2.400
Približna teža: 850
Cilinder: 180
Hitrost: 7,54
Csdpfx Aeicidnefqjhf
Hitrost: 10,90
Standardna oprema:
Kakovostna hidravlična preša, ki se lahko upravlja ročno ali motorizirano.
Cilindri so lahko premaknjeni bočno.
CE-certificirano
Regulacija tlaka
1 leto garancije
Manometer
Uporabniški priročnik (tiskan)
Širina stojala: 900 x 300 mm
Slika je simbolična.
mali oglas
Avstrija
226 km
C- Ekscentrične stiskalnice z enim stolpcem
KK KletzerExzenterpresse KK 125 to mit SPS Siemens S7 -12200
Klic
Stanje: novo, Pressure: 125 t
Ram Adjustment: (automatic adjustment) 40 mm
Maximum Stroke Length: 10–125 mm
Total Power Requirement: 11 kW
Approx. Weight: 8,000 kg
Dimensions (LxWxH): 1800 x 1500 x 2600 mm
Technical Data
Press Force: 125 t
Strokes per Minute: 50 spm
Table Size: 900 × 700 mm
Ram Size: 700 × 500 mm with pin receptacle
Stroke Adjustment: 20 – 125 mm
Ram Adjustment: 40 mm
Installation Height: 475 mm
Equipment & Features
Control System: Siemens S7-1200 PLC
Operating Display: 9” Siemens Touch Panel
Precise stroke setting directly via the display
Adjustment of min. & max. stroke count
Automatic central lubrication
Safety PLC: PILZ or Siemens
Dual-channel safety architecture in the control cabinet
Light curtains: SICK, PILZ or LEUZE (Category 4, CE compliant)
Chjdpektm N Dsfx Afqsf
2 rupture discs – included in delivery
Lower support plate for safe transportation
Anti-reach protection – for maximum occupational safety
Pneumatic clutch & brake combination
The machine impresses with an exceptionally comprehensive range of standard equipment at the highest technical level. The use of brand components such as Siemens, PILZ, and SICK ensures maximum reliability and durability.
mali oglas
Avstrija
226 km
Laser z optičnimi vlakni
KK KletzerLaser Fiber FLC-P 1530 3 kW + 220 mm Rohrschneidev
Klic
Stanje: novo, Laser power: 3 kW
Working area: 1500 x 3000 mm
Loading capacity: 1200 kg
X-axis travel: 1520 mm
Y-axis travel: 3030 mm
Positioning accuracy: 0.05 mm
Repeat accuracy: 0.03 mm
Dimensions (LxWxH): 10,000 x 400 x 2120 mm
The FLC Series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. This laser cutting system offers high efficiency and complies with top-tier standards. It supports a laser power of up to 30,000 W, making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are commonly used in the production of agricultural machinery, textile machinery, food processing equipment, construction machinery, elevators, and other large machines and systems.
It is an ideal cutting machine for anyone looking to outsource their cutting operations.
Wireless remote control enables easy blowing, cutting, pausing, calibration simulation, and more.
The machine includes standard nesting software that quickly arranges parts for cutting with minimal operator input and features flycut capability.
With a double shuttle table design, cutting can continue without downtime.
All our machines are manufactured to European standards and come with CE certification.
Our FLC series machines are equipped with nozzle cleaning and a dual camera system.
Available cutting table sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m.
The laser head features autofocus, active anti-collision, and an auto-view function for obstacle recognition and automated adjustment.
Cutting heads are equipped with automatic cooling.
All machine bridges are constructed as a single-piece welded aluminum alloy for maximum rigidity and lightweight design. This reduces the risk of deformation due to shocks or loads and allows for higher speeds and accelerations with lower motor power compared to steel bridges.
Included accessories:
- Water chiller
- Control cabinet cooling
- Automatic focus head
- Nesting software
- 19-inch CNC touch controller
- Flycut functionality
- Nozzle and lens starter kit
- Part debris drawers
- Automatic table changer
- Automatic nozzle cleaning
- CE conformity
- On-site operator training
- Wireless remote monitoring
- Automatic lubrication system
- Dual camera system
SPECIFICATIONS | VALUE
Working area: 1500 x 3000 mm
Loading capacity: 1200 kg
XY axis travel: 1520 x 3030 mm
Z axis travel: 300 mm
XYZ axis guide: 4-point ball cage
XY axis drive system: Rack & pinion
Z axis drive system: Ball screw
XY axis speed: 100 m/min
Z axis speed: 30 m/min
XY positioning accuracy: 0.05 mm
XY repeatability: 0.03 mm
Table change time: 10 s
Laser source: Raycus / Hans / JPT
Laser source output power: 2 / 3 / 4 / 6 / 8 / 12 / 20 kW
Chodpfsruwawox Afqjf
CNC control system: Fscut
Laser cutting head: Raytools / BOCI / WSX
Supported gases: Air / Oxygen / Nitrogen
Cooling type: Water-cooled
Machine weight: 12,000 kg
mali oglas
Avstrija
226 km
CNC pritisnite zavore
KK KletzerCNC Abkantpresse KK kletzer 32175 4 Achsen Y1-Y2-
Klic
Stanje: novo, Pressure: 175
Bending length: 3200 mm
Frame gap: 2700 mm
Installation height: 430 mm
Cjdpfx Afod Aklljqshf
Stroke length (max.): 200 mm
Throat depth: 400 mm
Dimensions (LxWxH): 4200x1900x2700 mm
Weight approx.: 10,000 kg
Standard equipment:
-----
CNC axes Y1, Y2, X, and R axis
CNC motorized crowning system with CNC controller
CNC controller Original DELEM DA 58 T 15-inch touchscreen
Backgauge with linear guides and ball screw
Sheet support arms on linear guides
Laser safety device on upper beam
Quick-release upper tool clamping
Upper tool system: Promecam Amada, segmented and goosenecked
Multi-V die block, 4-way, suitable for both Promecam Amada and insert dies
CE safety equipment
Various options available
KK-Industries GmbH
There's something for everyone!
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

mali oglas
Avstrija
226 km
CNC pritisnite zavore
KK KletzerCNC Abkantpresse KK Kletzer Europa Maxima XL 1300
Klic
Stanje: novo, Pressure: 40
Bending length: 1300 mm
Frame width: 1000 mm
Installation height: 400 mm
Stroke length (max.): 180 mm
Throat depth: 300 mm
Dimensions (LxWxH): 2125 x 1950 x 2100 mm
Weight approx.: 2500 kg
Motor power: 5.5 kW
Standard equipment:
KK-Industries GmbH is the general agent for the group. We offer for Europe a high-quality model – CNC press brake KK Kletzer, made by KK Kletzer in Bursa, Turkey.
Model: KK Kletzer Europa Maxima XL
The robust press brake KK Kletzer EUROPA Maxima XL is characterized by high precision, accuracy, and versatile fields of application.
KK Kletzer Europa Maxima XL features a very large installation height, resulting in an extended stroke (cylinder travel).
The generous throat depth ensures minimal restriction during operation.
We prioritize quality, which is also reflected in the control system.
As standard, we use the high-end ESA S640 15, made in Italy: 2D touch-screen controller with offline software.
Furthermore, the press brake KK Kletzer Europa Maxima XL is equipped with Y1, Y2, X, and R CNC axes integrated via the control unit.
Naturally, CNC crowning is included in the controller.
We also make no compromises regarding the upper tool and die. The CNC press brake KKI EUROPA XL comes equipped with high-quality tooling from EUROSTAMP, Italy.
Of course, the quality of a machine is only as good as the service provided. That's why we emphasize our own comprehensive service and employ only highly qualified staff with long-standing experience in CNC sheet metal processing.
CNC axes Y1, Y2, X, and R
Controller S640 15
Backgauge with double linear guide and ball screw
Motorized crowning device with CNC control
2 support arms
Laser safety device on the upper beam
CE protective equipment
Various options available
Sales by:
Tel.: 0043 (0)664 380 7776
Chodpfx Aed En R Ajfqef
We offer new and used machines, repairs, service, and sales.
There is something for everyone!
mali oglas
Avstrija
226 km
Sistemi varilnih miz 3 D brez nastavitve višine
KK KletzerSchweißtisch SST 80/16S Ø28 Fix 1400x900
Klic
Stanje: novo, Table height: 800 mm
Dimensions (LxWxH): 1400 x 900 x 800 mm
Table width: 900 mm
Table length: 1400 mm
Weight approx.: 235 kg
Special workbench systems of the SST, SFT, and SWT fixed series as 3D clamping workstations for efficient production of assembly, welding, and bonding structures, e.g. fixtures, railings, frames, etc. With the help of the comprehensive range of clamping accessories (see catalog section welding table accessories), these table systems can also be used as flexibly configurable fixtures, thus enabling high-quality production of small and medium series.
The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, equipped with a Ø28 mm hole grid. Additionally, the tabletop features a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The grid of holes allows the use of a wide variety of clamping and fixing elements. For specific applications, the tabletop surface can, as an option and deviating from the standard, also be equipped in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70.
Thanks to the fully bolted design of the clamping plate, the work surface can be replaced cost-effectively in case of wear. This ensures that the table system remains particularly sustainable and long-lasting.
Cjdpfofk Aitox Afqohf
Price must be reconfirmed with the manufacturer prior to ordering!
For accessories and further information, please follow this link:
mali oglas
Avstrija
226 km
Sistemi varilnih miz 3 D z nastavitvijo višine
KK KletzerSchweißtisch SWT 65-105/16SL Ø28 Flex 1950x950
Klic
Stanje: novo, Table height: 650 - 1050 mm
Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm
Table width: 950 mm
Table length: 1950 mm
Approx. weight: 475 kg
Csdpfxefk E D As Afqshf
This allows the user to flexibly adjust the working surface height according to specific requirements, thereby improving efficiency and ergonomics. Height adjustment is standard via a manual hydraulic mechanism within a range of 650 – 1050 mm (other heights available on request). The worktop, as with the SST fix series, features a 100 x 100 mm, Ø 28 mm hole grid. When used in combination with processing machines, inspection or post-processing devices (such as deburring, marking, or testing fixtures) can be adjusted to match the clamping table height of the machine.
The table systems can easily be relocated using a pallet truck. These mobile systems, with their various fixing and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on site and then moved to maintenance for repairs. The fully bolted design of the clamping plate enables cost-effective replacement of the working surface in case of wear at a later date.
Price must be confirmed with the manufacturer prior to ordering!
For accessories and additional information, please follow this link:
mali oglas
Avstrija
226 km
Hidravlični rezalni nihajni rez
KK KletzerCNC Tafelschere Schwingschnitt KK Kletzer SWT 301
Klic
Stanje: novo, Sheet length: 3100 mm
Sheet thickness: 13.0 mm
Total power requirement: 30 kW
Chedpjfnqi Tofx Afqof
Approx. weight: 12 t
Dimensions (LxWxH): 3950 x 2240 x 2100 mm
Our strong brand KK Kletzer CNC guillotine shears, swing beam version Model SWT, offers everything you need for cutting operations.
We have also raised the standard for the swing beam version: All our guillotine shears now include automatic blade gap adjustment via the ELGO P40T touchscreen control at no additional cost.
NC swing beam guillotine shear KK Kletzer
Technological advantages:
• Fast and precise cuts
• Sturdy, durable frame construction
• Automatic blade gap adjustment
• Easy operation
• Low maintenance costs
• High safety standard
• Use of components from renowned manufacturers
• Low unit costs
Technical data:
Sheet thickness: 13 mm
Cutting length: 3,100 mm
Cutting angle: 2.3°
Number of hold-downs: 15
Backgauge: 1,000 mm, CNC-controlled
Motor power: 30 kW
Throat depth: 50 mm
Length: 3,950 mm
Width: 2,240 mm
Height: 2,100 mm
Weight: 12,000 kg
• Robust swing beam design
• Blade gap adjustment via the control system
- Backgauge
- Blade gap
- Cutting length
• Ball screw drives for backgauge
• Balls integrated in the table
• 1,500 mm side gauge
• 2 support arms, 1,000 mm each
• Cutting line illumination
• Foldable finger guard to 1,000 mm
Option:
Pneumatic sheet support, EURO 3,900,--
We have numerous references!
Olajšamo vam iskanje: "klet opažev"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni Klet Opažev (794)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec




















































