Klet Opažev nakup rabljenega (257)

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Pgjdpfjtvhxisx Adyog Installation height: 400 mm Maximum stroke length: 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Approx. weight: 14,000 kg CNC Press Brake 3200 mm x 200 to Standard equipment: ----- Robust construction CNC axes: Y1, Y2, X, and R axis CNC-controlled motorized crowning system Original DELEM DA-58T CNC control, 15-inch touchscreen Back gauge with linear guide and ball screw, with 4 stop fingers 2 sheet supporter arms Laser safety device on upper beam Quick-clamp system for upper tool Upper tool system: Promecam/Amada segmented, gooseneck design Multi-V die system, compatible with both Promecam and Amada systems CE-compliant safety equipment

Stanje: novo, Pressure: 150 Ram Adjustment: (automatic adjustment) 40 mm Stroke length (max.): 10–125 mm Total power requirement: 15 kW Approx. weight: 9500 kg Dimensions (LxWxH): 1800 x 1500 x 2600 mm Strokes/min: 50–90 Machine and equipment in accordance with CE regulations Light sensors: SICK or PILZ PLC control: Siemens S7 – 1200* Stroke adjustment: directly via control panel Balancing system: integrated Speed adjustment: via Mitsubishi frequency inverter Machine frame: solid steel construction Guidance: inner and outer eccentric guide Crankshaft: made of hardened 4140 steel Clutch & brake: pneumatic combination Safety valve: two-way system Safety control (Safety PLC): SICK or PILZ Operation: two-hand control and foot pedal possible Lubrication: automatic lubrication system Overload protection: hydraulic Safety device: safety enclosure around work area External connections: 8-pin inputs & outputs on PLC (for signal exchange & upgrades) Vibration damping: rubber mats under machine feet (1 set – 4 pieces) Voltage/frequency: 400 V / 50 Hz Fuse: 32 A required Standards: Machine and equipment compliant with CE directives Control unit: 19-inch Siemens touchscreen Technical data: - Operation: jog mode / single stroke / continuous stroke - Press force: 150 t - Table plate: 750 x 1000 mm (fixed table plate) - Stroke length: 10–125 mm, automatic stroke adjustment via PLC - Slide plate: 500 x 800 mm (Ø 55 mm pin receptacle & T-slots as per customer request) Pgedpfotqwtdex Adyjg - Strokes: 50–90 /min - Motor: 15 kW (1400 rpm) - Throat depth: 325 mm - Installation height: 475 mm to 295 mm - Pin hole in ram: 50 mm - Length: 1,800 mm - Width: 1,500 mm - Height: 2,600 mm - Weight: approx. 9,500 kg - Ram adjustment: 40 mm (automatic adjustment)

Stanje: novo, Pressure: 200 Bending length: 3200 mm Frame width: 2700 mm Installation height: 400 mm Stroke length (max.): 200 mm Throat depth: 350 mm Dimensions (LxWxH): 3700 x 1700 x 2700 mm Weight approx.: 14,000 kg Motor: 15 kW CNC Press Brake 3200 mm x 200 t Pgedpfjtq Nm Nex Adysg Standard equipment: ----- Robust construction CNC axes Y1, Y2, X and R axis CNC crowning system, motorized and CNC controlled CNC controller Original DELEM DA 58 T touchscreen, 15-inch Backgauge with linear guide and ball screw with 4 stops 2 sheet support arms Laser safety device on the upper beam Quick clamping system for upper tool Tool system upper tool Promecam Amada, segmented and gooseneck Multi V-die system, both Promecam and Amada compatible Safety equipment Our machine features an Ecoline mode, which allows energy consumption optimization to save costs, and the machine operates very quietly.

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1400 x 900 x 800 mm Table width: 900 mm Table length: 1400 mm Weight approx.: 235 kg Special workbench systems of the SST, SFT, and SWT fixed series as 3D clamping workstations for efficient production of assembly, welding, and bonding structures, e.g. fixtures, railings, frames, etc. With the help of the comprehensive range of clamping accessories (see catalog section welding table accessories), these table systems can also be used as flexibly configurable fixtures, thus enabling high-quality production of small and medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, equipped with a Ø28 mm hole grid. Additionally, the tabletop features a 100 x 100 mm grid marking for easy alignment of workpieces and fixtures. The grid of holes allows the use of a wide variety of clamping and fixing elements. For specific applications, the tabletop surface can, as an option and deviating from the standard, also be equipped in stainless steel 1.4301, aluminum, plastic, or high-strength materials such as ST70. Pjdpfefk Aitex Adyjgg Thanks to the fully bolted design of the clamping plate, the work surface can be replaced cost-effectively in case of wear. This ensures that the table system remains particularly sustainable and long-lasting. Price must be reconfirmed with the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1950 x 950 x 650 to 1050 mm Table width: 950 mm Table length: 1950 mm Approx. weight: 475 kg This allows the user to flexibly adjust the working surface height according to specific requirements, thereby improving efficiency and ergonomics. Height adjustment is standard via a manual hydraulic mechanism within a range of 650 – 1050 mm (other heights available on request). The worktop, as with the SST fix series, features a 100 x 100 mm, Ø 28 mm hole grid. When used in combination with processing machines, inspection or post-processing devices (such as deburring, marking, or testing fixtures) can be adjusted to match the clamping table height of the machine. The table systems can easily be relocated using a pallet truck. These mobile systems, with their various fixing and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Immediately after removal from the machine, tools can be safely serviced on site and then moved to maintenance for repairs. The fully bolted design of the clamping plate enables cost-effective replacement of the working surface in case of wear at a later date. Price must be confirmed with the manufacturer prior to ordering! Psdpfx Adefk E D Ajyjgg For accessories and additional information, please follow this link:

Stanje: novo, Sheet length: 3100 mm Sheet thickness: 13.0 mm Total power requirement: 30 kW Approx. weight: 12 t Dimensions (LxWxH): 3950 x 2240 x 2100 mm Our strong brand KK Kletzer CNC guillotine shears, swing beam version Model SWT, offers everything you need for cutting operations. We have also raised the standard for the swing beam version: All our guillotine shears now include automatic blade gap adjustment via the ELGO P40T touchscreen control at no additional cost. NC swing beam guillotine shear KK Kletzer Technological advantages: • Fast and precise cuts • Sturdy, durable frame construction • Automatic blade gap adjustment • Easy operation • Low maintenance costs • High safety standard • Use of components from renowned manufacturers • Low unit costs Technical data: Sheet thickness: 13 mm Cutting length: 3,100 mm Cutting angle: 2.3° Number of hold-downs: 15 Backgauge: 1,000 mm, CNC-controlled Motor power: 30 kW Throat depth: 50 mm Length: 3,950 mm Width: 2,240 mm Height: 2,100 mm Weight: 12,000 kg • Robust swing beam design • Blade gap adjustment via the control system - Backgauge - Blade gap - Cutting length • Ball screw drives for backgauge • Balls integrated in the table • 1,500 mm side gauge • 2 support arms, 1,000 mm each • Cutting line illumination • Foldable finger guard to 1,000 mm Pgodpfx Adofnqi Teyeg Option: Pneumatic sheet support, EURO 3,900,-- We have numerous references!

Stanje: novo, Pressure: 175 Bending length: 3200 mm Frame gap: 2700 mm Installation height: 430 mm Stroke length (max.): 200 mm Throat depth: 400 mm Dimensions (LxWxH): 4200x1900x2700 mm Weight approx.: 10,000 kg Standard equipment: ----- CNC axes Y1, Y2, X, and R axis CNC motorized crowning system with CNC controller CNC controller Original DELEM DA 58 T 15-inch touchscreen Backgauge with linear guides and ball screw Sheet support arms on linear guides Laser safety device on upper beam Quick-release upper tool clamping Upper tool system: Promecam Amada, segmented and goosenecked Multi-V die block, 4-way, suitable for both Promecam Amada and insert dies CE safety equipment Various options available KK-Industries GmbH Pgsdpfx Adod Aklloyog There's something for everyone!

Stanje: novo, Pressure: 40 Bending length: 1300 mm Frame width: 1000 mm Installation height: 400 mm Stroke length (max.): 180 mm Throat depth: 300 mm Dimensions (LxWxH): 2125 x 1950 x 2100 mm Weight approx.: 2500 kg Motor power: 5.5 kW Standard equipment: KK-Industries GmbH is the general agent for the group. We offer for Europe a high-quality model – CNC press brake KK Kletzer, made by KK Kletzer in Bursa, Turkey. Model: KK Kletzer Europa Maxima XL The robust press brake KK Kletzer EUROPA Maxima XL is characterized by high precision, accuracy, and versatile fields of application. KK Kletzer Europa Maxima XL features a very large installation height, resulting in an extended stroke (cylinder travel). Pgjdpfed En R Aex Adyeg The generous throat depth ensures minimal restriction during operation. We prioritize quality, which is also reflected in the control system. As standard, we use the high-end ESA S640 15, made in Italy: 2D touch-screen controller with offline software. Furthermore, the press brake KK Kletzer Europa Maxima XL is equipped with Y1, Y2, X, and R CNC axes integrated via the control unit. Naturally, CNC crowning is included in the controller. We also make no compromises regarding the upper tool and die. The CNC press brake KKI EUROPA XL comes equipped with high-quality tooling from EUROSTAMP, Italy. Of course, the quality of a machine is only as good as the service provided. That's why we emphasize our own comprehensive service and employ only highly qualified staff with long-standing experience in CNC sheet metal processing. CNC axes Y1, Y2, X, and R Controller S640 15 Backgauge with double linear guide and ball screw Motorized crowning device with CNC control 2 support arms Laser safety device on the upper beam CE protective equipment Various options available Sales by: Tel.: 0043 (0)664 380 7776 We offer new and used machines, repairs, service, and sales. There is something for everyone!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1450 x 950 x 650 to 1050 mm Table width: 950 mm Pedpfsgrvv Tex Adysgg Table length: 1450 mm Approx. weight: 308 kg This allows the user to flexibly adjust the working surface height to suit the specific requirements, improving both efficiency and ergonomics. Height adjustment is standardly effected via a manual hydraulic system, with a range of 650 – 1050 mm (other ranges available upon request). The table systems can be easily relocated on site using a pallet truck. These mobile systems, with various mounting and securing options, have proven ideal for the maintenance of injection moulding and die casting tools. After removal from the machine, tools can be safely serviced on site and then transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of later wear. The following Table 2 provides an overview of the available standard models. Price must be reconfirmed with the manufacturer before ordering!

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 1400 x 900 x 650 to 1050 mm Table width: 900 mm Table length: 1400 mm Pjdpfegrvwbjx Adyogg Approx. weight: 305 kg This allows the user to flexibly adjust the working surface height according to specific requirements to improve efficiency and ergonomics. The height adjustment is provided as standard by a manual hydraulic system within a range of 650 – 1050 mm (other heights available upon request). The table systems can easily be relocated onsite using a pallet truck. These mobile systems have proven ideal due to their various fastening and securing options for the maintenance of injection moulding and die-casting tools. After removal from the machine, tools can be safely serviced onsite and then transferred to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, the working surface can be cost-effectively replaced in the event of wear. The following Table 2 provides an overview of the available standard models. Price must be requested from the manufacturer prior to ordering!

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1480 x 1480 x 800 mm Pgedpegrz Ttefx Adyog Table width: 1480 mm Table length: 1480 mm Weight approx.: 602 kg This enables the user to flexibly adjust the working surface height to the respective requirements, improving efficiency and ergonomics. The height adjustment is provided as standard by a manual hydraulic system within a range of 800 mm (other heights available on request). Like the SST fix series, the worktop also features a 100 x 100 mm grid with Ø 28 mm holes. When used in combination with processing machines, test or reworking devices (deburring, marking, inspection) can be adjusted to the clamping table height of the machine. The table systems can be easily relocated using a pallet truck. These mobile systems, with various fastening and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely maintained on site immediately after removal from the machine and transported to maintenance for repairs. Thanks to the fully bolted construction of the clamping plate, if the work surface wears out over time, it can be replaced cost-effectively. Price must be requested from the manufacturer before ordering!! For accessories and further information, please follow this link:

Stanje: novo, Table height: 800 mm Dimensions (LxWxH): 1480 x 1480 x 800 mm Table width: 1480 mm Table length: 1480 mm Pjdpfxsgrz Tws Adysgg Weight approx.: 469 kg Special workbench systems of the SST, SFT, and SWT fix series serve as 3D clamping workstations for efficient assembly, welding, and bonding applications, such as fixtures, railings, frames, etc. With the help of a comprehensive range of clamping accessories (see catalogue section Welding Table Accessories), these table systems can also be flexibly set up as fixtures and thus enable high-quality production of small and medium series. The special workbenches feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop equipped with a Ø28 mm grid of holes. Additionally, the table top features a 100 x 100 mm grid marking for easy alignment of workpieces or fixtures. The hole pattern allows for the use of various clamping and positioning elements. For specific applications, and deviating from the standard, the tabletop surface can be supplied in stainless steel 1.4301, aluminum, plastic, or even high-strength ST70 materials. Due to the fully bolted construction of the clamping plate, the work surface can be economically replaced when worn, making the table system especially sustainable for long-term use. Price must be requested from the manufacturer prior to ordering!! For accessories and further information, please follow this link:

Stanje: novo, Leto izdelave: 2025, Table surface: 2000 x 1000 mm Installation height: 700 mm (distance between table and piston tip) Table height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump capacity: 22 l/min Forward speed: 9 mm/s Return speed: 13 mm/s Tank capacity: 70 l Capacity: 150 tons – 340 bar / 172 tons – 380 bar Motor control via hand lever Cylinder manually adjustable sideways Bridge adjustable via handwheel Table surface: 2000 x 1000 mm Installation height: 700 mm (distance between table & piston tip) Piston stroke: 400 mm Table height: 800 mm Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 l/min – ASC Speed: forward 9 mm/s – return 13 mm/s Tank volume: 70 l Pressure regulator valve Pressure gauge indicator Pressure hold valve Pedpfxjhu H Dpe Adysgg Weight: 2,300 kg

Stanje: novo, Press force: 100 t Strokes per minute: 50 Table clamping area: 900 x 700 mm Pgedpev Hin Eofx Adysg Ram dimensions: 500 x 350 mm Stroke adjustment: 20 – 130 mm Ram adjustment: 100 mm Shut height: 400 mm EEP-PK100 – Eccentric Press Technical Data: Capacity: 100 t Strokes per minute: 50 spm Table size: 900 × 700 mm Ram size: 500 × 350 mm Stroke adjustment: 20 – 130 mm Ram adjustment: 100 mm Shut height: 400 mm Equipment & Accessories: Control system: Siemens S7-1200 PLC Operator screen: Siemens 9’’ touchscreen Stroke adjustment directly via display Setting of min. & max. stroke rates Automatic central lubrication Safety PLC: PILZ or Siemens Dual-channel safety design in control cabinet Light barriers: SICK, PILZ or LEUZE (Category 4, CE-compliant) CE-compliant safety system 2 rupture discs – included in delivery Bottom support plate for secure transport Finger protection – for maximum operator safety Pneumatic clutch & brake combination This machine stands out due to its exceptionally comprehensive standard equipment at the highest technical level. The use of brand components such as Siemens, PILZ, and SICK ensures utmost reliability and durability.

Stanje: novo, Delovno območje: 3000 x 1500 Natančnost pozicioniranja: 0,03 Ponovljivost: 0,02 Psdpsxv Ha Hefx Adyogg Moč laserja: 6 kW Tehnični opis – Vlaknovi laserski rezalni stroj LD-3015E Model: 3015E Delovno območje: 3000 × 1500 mm Maksimalna premikalna hitrost (Linkage Speed): 170 m/min Maksimalno pospeševanje: 2,0 G Skupne dimenzije stroja: 10.000 × 3.000 × 2.400 mm Skupna teža: 5.000 kg Natančnost pozicioniranja: ±0,03 mm Ponovljivost: ±0,02 mm Z-hod: 350 mm Laserska glava: BOCI BLT421 (6 kW) Portalska struktura: varjeni železni portal Laserski vir: Raycus 6000 W (CE certificirana globalna različica)

Stanje: novo, Leto izdelave: 2025, Sheet thickness: 10 mm Sheet length: 3200 mm Combination Package: CNC Press Brake & Swing Beam Shear For precise, cost-effective, and safe sheet metal processing We offer you a high-performance, complete package consisting of a CNC press brake (160 t / 3200 mm) and a swing beam shear (10 mm / 3200 mm) – optimally matched for modern sheet metalworking with high precision and efficiency. CNC Press Brake – 160 tons / 3,200 mm With 4 CNC axes (Y1, Y2, X, R) & CNC crowning system Standard features: - Robust, torsion-resistant construction for precise bending and long service life - CNC axes: Y1, Y2, X, and R – for accurate positioning and repeatability - Motorized CNC crowning system for automatic bending angle correction - CNC control ZY 68 (comparable to Delem) – intuitive, powerful, and flexible - Backgauge with linear guides & ball screw, 4 gauging fingers - 2 sheet support arms for ergonomic operation - Laser safety device on the upper beam for high operator safety - Quick clamping system for top tools - Tooling system: Promecam Amada (segmented and gooseneck) - Die system compatible with Promecam & Amada - Complete CE safety equipment Swing Beam Shear SWC 3200 x 10 mm With NC control and motorized backgauge Technical data: - Sheet thickness: up to 10 mm, cutting length: 3,200 mm - Cutting angle: 1.30°, Motor power: 15 kW - Motorized backgauge: up to 1,000 mm - Dimensions: L 3,800 × W 1,820 × H 1,920 mm - Weight: 7,700 kg Pjdpownz Apofx Adyegg Features - Swing beam design for clean cuts - NC control ELGO P40 T with front-side operation (incl. blade gap adjustment) - Hydraulic hold-downs close to the cutting line - Clear control console on swing arm - Foot switch, blade gap adjustment & cutting line illumination - Wide support table with ball transfers, 2 sheet support arms with T-slot - Folding finger guard, 1 side gauge with T-slot - Upper blade double-edged / lower blade four-edged, reversible - Adjustable cutting length for time-saving operation - Qualified customer service, English operating manual - CE-compliant design Your advantage – Everything from a single source: - Perfectly coordinated machines - Time and cost savings with the combination offer - Ideal for workshops, metal fabricators & job shops Enquire now and secure a non-binding quotation!

Stanje: rabljeno, In this listing, you are purchasing a pre-owned booklet trimmer 'Canon Booklet Trimmer F1'. Item for sale: 1 x Canon Booklet Trimmer F1, suitable for, among others, the following models: Canon imagePRESS C850/C750/C650 Canon imagePRESS C165 series Canon imagePRESS C910 series Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). The device has been function-tested. Packaging and Shipping: Pjdpfxot Hd D Rs Adyogg You are welcome to inspect the device during our business hours. Please arrange an appointment for this purpose! Sea-worthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Stanje: rabljeno, Leto izdelave: 1977, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 610, Rezalna in tiskarska linija za troslojni karton s fleksotiskarskimi stroji (tisk v 2 barvah) - maksimalni format lista 950 x 2200 mm (skip-feed 1200 mm) - minimalni format lista 260 x 280 mm Dimenzije stroja dolžina - 3550 mm širina - 3660 mm Pgsdpowl Izyefx Adyeg višina - 3500 mm teža 8000 kg moč - 8 kW Podajalna enota z letevjo za podajanje listov v napravo. Proces je podprt s sesanjem lista s pomočjo zračne črpalke.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, V tej ponudbi kupujete rabljeni brosura-finisher "Konica Minolta SD-513" Predmet prodaje: Psdox D Ab Aspfx Adyjgg 1 x Konica Minolta SD-513: Stanje: Gre za rabljeno napravo, ki lahko kaže sledi uporabe (manjše praske ali porumenelost). Naprava je testirana za delovanje Preskusni izpis je viden na fotografiji Pakiranje in dostava: Napravo si lahko ogledate v času našega delovnega časa. Prosimo, da se za to dogovorite za termin! Možno je pomorsko pakiranje in svetovna dostava po povpraševanju! Za več informacij nas lahko osebno kontaktirate.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, V tem oglasu kupujete rabljeni brosurirni finišer 'Konica Minolta SD-506 WY3'. Predmet prodaje: 1 x Konica Minolta SD-506 z naslednjo opremo: Specifikacija izdelka: WY3 Iščete drugačno opremo? Na zalogi imamo dodatno opremo in stroje. Kontaktirajte nas! Stanje: Gre za rabljeno napravo, ki lahko kaže znake uporabe (manjše praske ali rumenenje). Naprava je testirana na funkcionalnost. Pakiranje in dostava: Pgodpfx Adoyamx Eoyjg Napravo si lahko ogledate v našem delovnem času. Prosimo, da se za to dogovorite za termin! Morsko varno pakiranje in svetovna dostava možna na zahtevo! Pred pošiljanjem ali prevzemom bomo za vas posneli video funkcijskega testa. Za več informacij nas lahko seveda tudi osebno kontaktirate.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, In this offer, you are purchasing a used colour production system "Canon imagePRESS C10000VP". Scope of supply: 1 x Canon imagePRESS C10000VP with the following equipment: Pgjdoxzpxcopfx Adyog - Fiery Server included - Paperdeck POD D1 included - Booklet Finisher A-N2 included Not the right configuration? No problem – we can configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 8,669,430 pages Colour: approx. 6,566,291 pages Black: approx. 2,103,239 pages Condition: This offering is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to inspect the device during our business hours. Please schedule an appointment in advance! Sea-worthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before shipping or collection. For further information, please feel free to contact us personally.

Stanje: rabljeno, The offer includes: - Short delivery tray Horizon SC-20 Short delivery tray - Compatible with: Horizon FC-20/ FC-20A Upon request, we can arrange the following services for you: Packaging, loading, transport (by ship or airplane), including customs clearance Pgsdpfow Evawsx Adyjg Obtaining a leasing offer

Stanje: rabljeno, Leto izdelave: 2002, 3 MONTH WARRANTY Offer includes: Pgsdpfx Adeu Tdmqjysg Horizon HP-20A Punch Unit - Function: Punching and Pressing - Number of Punch Holes: max. 4 holes; min. 2 holes - Hole Spacing: max. 14mm; min. 9mm - Hole Diameter: 6mm - Format: max. 350x500mm; min. 120x90mm - Processing Thickness: max. 3.2mm - Speed/hour: max. 4,050 brochures/h - Power Supply: 230V / 50Hz – 260W - Dimensions: 590x760x1035mm - Weight: 200kg Upon request, we can organize the following services for you: Packaging, loading, and transport (by ship or air), including customs clearance.

Stanje: rabljeno, Leto izdelave: 2013, DIRECT FROM PRINTING HOUSE We are selling this machine on behalf of our customer and are aiming to meet their price expectations. However, we are open to your offers. The offer includes: Horizon SmartStacker - SMST-F Smartstacker offline including Near-Line Feeder, SMST-FBR barcode control, SMST-EV extraction funnel / trim conveyor - Accessories: - SMST ionization - SMST sensor set (7 pieces) - Format: max. 762x530mm; min. 279.4x330mm - Finished format: max. 380x530mm; min. 100x105mm - Paper weight: 80 – 370 g/m² - Paper thickness: 0.1 – 0.381mm - Feeder: 800 mm (required for offline and nearline operation only) - Stacking capacity: max. 254 mm Pgodpeu Srt Ejfx Adyjg - Utilization processing: 1 – 28 ups per B2 sheet - Speed: max. 4,600 sheets/h Upon request, we can organize the following for you: Packaging, loading, transport (by sea or air), including customs clearance Obtaining a leasing offer

Stanje: rabljeno, Leto izdelave: 2013, The Duplo Bookletmaker System 5000/4000 is a highly advanced and efficient finishing solution that precisely and reliably optimizes booklet production. Manufactured in 2013 and currently in operation at a German print shop, this system processes sheets up to 350 x 500 mm, making it ideal for a wide range of booklet and brochure formats. Pgsdpfx Ajxphybjdysg The system comprises two collation towers with 10 bins each (DBM 4000), ensuring smooth and orderly sheet collection. It also includes a delivery/offset stacker (DBM 4000) for clean stacking of output, as well as a stitching and folding unit (DBM 5000) for professional booklet assembly. A dedicated press unit (DBM 5000) ensures sharp, flat results, while the integrated trimmer (DBM 5000) – equipped with new knives and an upgraded controller – delivers consistently clean, precise cuts. The system offers an adjustable kicker/display function for customized interval settings, enhancing operational flexibility. The DBM 4000 components were manufactured in 2007, and the DBM 5000 units were added in 2013. With 4 million cycles per tower and 2.5 million trimmer cycles, this system has proven its durability and performance. Regular servicing by FKS Hamburg ensures the machine remains in optimal working condition, meeting the demands of high-volume production. Specifications: Sheet format: up to 350 x 500 mm Equipment: - 2 x DBM 4000 Collator towers with 10 bins each (Duplo) - 1 x DBM 4000 Delivery/Offset Stacker (Duplo) - 1 x DBM 5000 Stitcher & Folder (Duplo) - 1 x DBM 5000 Press Unit (Duplo) - 1 x DBM 5000 Trimmer (Duplo) (fitted with new knives/new controller) - 1 x Adjustable Kicker/Delivery for custom intervals System DBM 4000 year of manufacture: 2007, System 5000 year of manufacture: 2013 Towers: 4 million cycles each; Trimmer: 2.5 million cycles Serviced by FKS Hamburg