Klin nakup rabljenega (688)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, TEHNIČNI PODATKI Maks. dolžina vpenjanja: 90 mm Višina vpenjanja orodja s konusnim steblom: 50 mm Višina vpenjanja orodja z ravnim steblom: 45 mm Maks. kot vijačnice: 45° Število vpenjalnih položajev: 1 do 99 Maks. hod sani: 550 mm Maks. premer brusnega koluta: 350 mm Knodpfowwkacsx Ah Aef Min. premer brusnega koluta: 150 mm Hitrost brusnega koluta (nastavljiva): do 2700 min⁻¹ Območje vrtenja osi brusnega vretena: 0° do 15° Pomik brusne sani (nastavljiv): 0,05 do 16 mm/min (pri 3. in 4. osi: 0,05 do 8 mm/min) Stožec vretena obdelovanca: ISO stožec št. 40 Podatki o brusnih kolutih CBN in diamantni skledasti brusni kolut: Ø200 mm → min. DFF: 66 (3. os), 76 (4. os) Ø250 mm → min. DFF: 16 (3. os), 26 (4. os) CBN-ES stožčasti brusni kolut: Ø200 mm → min. DFF: 50 (3. os), 60 (4. os) Ø250 mm → min. DFF: 0 (3. os), 10 (4. os)

Obratovalne ure: 0 h, Stanje: pripravljen za uporabo (rabljen), General Location: 15 x Bremen Knjdpfjftmntox Ah Ajf Condition: used Tank Manufacturer: Stöcklin Volume: 800 liters Max. overpressure: 1.0 bar Max. permitted operating temperature: 120 °C Design: container Support type: legs Number of legs: 4 pieces Technical data / Dimensions Internal diameter: 1,000 mm Cylindrical height: 700 mm Total height: 1,590 mm Equipment Manhole / Dome: in the top section (DN 400) Nameplate: present Fittings: disc valve Outlet: DN50 DIN 11851 Remark: Signs of use Notes: Containers are available in different configurations, so details may vary; minor dents possible Last intended use: food products Material composition Product-contact material: V2A 1.4301 (AISI 304) Leg material: stainless steel

Leto izdelave: 2016, Stanje: rabljeno, Stroj za pranje steklenic za 7000 steklenic/uro Stroj (dodatno): Enostranski stroj za pranje steklenic Knjdew Tam Nepfx Ah Aef Nazivna zmogljivost: 7000 steklenic/uro Pretočni čas: 22 min. Poraba toplote za ogrevanje: 1785400 kJ/h Poraba toplote med obratovanjem: 455000 kJ/h Moč: 29,5 kW Električni tok: 63 A Napetost: 230 / 400 V Frekvenca: 50 Hz Voda: 3 bar, 2,5 m³/h Stisnjen zrak: 6 bar, 40 l/min. Dolžina: 8,81 m Širina: 3,46 m Višina: 2,8 m Formati: 0,5 l Euro Razporeditev po slojih: 20 steklenic/vrstica, 132 vrstic Upravljanje / krmiljenje: PLC krmiljenje, upravljalna konzola Material: nerjavno jeklo Namestitev / položaj: prostostoječe Osnovna konstrukcija: samonosilno ohišje na nastavljivih nogah Oprema: PLC krmiljenje, menjalnik, črpalke, toplotni izmenjevalnik, odstranjevanje etiket, Teža: 13000 kg

Stanje: rabljeno, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and drive technology for noise and contact pattern testing of bevel and hypoid gears. Technical Data Diameter: 540 (400) mm Hypoid: ±50 mm Pinion spindle diameter: 90 mm Dimensions: 1,800 x 1,800 x 1,600 mm Machine weight: approx. 2,800 kg *Specifications and data are non-binding. Subject to prior sale. Special Features: This machine is intended for noise and contact pattern testing of bevel and hypoid gears of all types. By simulating operating conditions, applying different speeds, and changing load conditions for drive and coast sides, the optimal mounting distance for stationary operation can be determined. • Digital actual value display for 2 axes • Stepless speed adjustment via frequency converter • Electrically interlocked and removable safety guard Kjdsxpq Nlspfx Ah Ajnf • Accessories – wide range of workpiece fixtures • Condition: very good

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, skupna masa: 2.900 kg, moč: 8 kW (10,88 KM), vhodna napetost: 380 V, število bročirnih položajev: 1, skupna širina: 6.100 mm, skupna višina: 1.900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine no.: 1194 General / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Pulling force: 10,000 kg Diameter of pull head mount in the crossbeam: 85 mm Broaching tool clamping: Universal pull head for flat shanks up to 25 mm width Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the tool feeder machine body) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (without working area) Power supply / connected load: 380 Volt, 50 Hz / 8.0 kW Accessories / Special features: • The machine features manual-hydraulic control for the broaching stroke movement Knodpfx Aextcz Ioh Ajf • The machine is equipped with an integrated coolant/lubricant system • A basic oil drip tray is mounted on the machine bed without tool feeder! Remarks: The machine is ideal for manufacturing keyways and profiles. Broaching needles, arbors and pull heads can be supplied upon request.

Stanje: rabljeno, Wheel diameter – max. 0-200 mm Module – max. 25 Module – min. 0.5 with accessories and under-table Year of manufacture approx. 1995 Knedjtuxa Ujpfx Ah Aef

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.860 kg, Leto izdelave: 2010, 20 N PLATES FILTRANTI 1500X1500 MM, CHAMBER 30 MM, OPERATING PRESSURE 16 BAR, DRAINAGE WITH TAP. MANUFACTURED WITH INTERNAL SPHERICAL-RIBBED SURFACES TO EXTEND FILTER CLOTH LIFESPAN. THE PLATES ARE NEW, NEVER USED OR INSTALLED, AND ARE BEING SOLD AS SURPLUS STOCK. Kjdpfevyzgmjx Ah Aonf SUITABLE FOR BOTH HIGH-BEAM AND CENTRAL-BEAM FILTER PRESSES.

Stanje: rabljeno, Leto izdelave: 2002, Wheel diameter - max. 275 mm Module - max. 6 Kedovxwnwepfx Ah Ajnf Module - min. 1.5 Control system SINUMERIK 840 C Gear width 5.5 mm Helix angle min. 0 / max. 60° Number of teeth - max. 120 Number of teeth - min. 5 Transmission ratio max. 1:10 Transmission ratio min. 1:1 Workpiece spindle speed max. 110 rpm Cutter head speeds 20 - 110 rpm Total power requirement 100 kW Machine weight approx. 16.7 t Space requirement approx. 5.20 x 2.30 x 2.40 m Integrated deburring unit U-axis / Q-spindle Chip conveyor Coolant system Electrostatic air cleaner ELBARON No tools No workpiece clamping device

Stanje: zelo dobro (rabljeno), Stroj za brušenje jekla, proizvajalec Klingel, tip HSM z 4 postajami 2 brusna koluta premera 200 mm 1 polirni kolut premera 100 mm Knsdpfxew Stmys Ah Ajf 1 polirni kolut premera 150 mm s hladilno napravo 380 V Potrebni prostor: Dolžina: 1200 mm Širina: 1200 mm Višina: 1500 mm s paleto Teža: 530 kg s paleto

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, The Klingelnberg PKE 300 H (PSKE 900) bevel gear testing machine was designed as a universal machine for the flexible machining of gears and is used for single-flank rolling tests of bevel gears with evaluation. The image shows the machine in its current condition as a retrofit / modernized version. Knedstncnhepfx Ah Aof Technical specifications: - Gear diameter: 450 (300) mm - Axis angle: 90 degrees - Hypoid offset: +/- 60 mm - Footprint approx.: 1.4 x 0.8 x 1.5 m - Machine weight approx.: 1,100 kg Further information on available options and the current purchase price upon request. *All information and schedules are non-binding. Subject to prior sale.

Stanje: novo, Abrasive belts for belt grinding machines with belt dimensions 150 x 2000 mm Grit 80, 44 pieces Grit 60, 35 pieces Grit 36, 12 pieces Prices on request! Knjdpfxec Rf S As Ah Ajf

Stanje: rabljeno, Leto izdelave: 1997, Wheel diameter – max. 275 mm Wheel width 150 mm Module – max. 6 Module – min. 1.5 Total power requirement 62 kW Machine weight approx. 12 t Space requirement approx. 4.7 x 4.4 x 2.45 m DESCRIPTION Wheel diameter – max. 275 mm Wheel width 150 mm Module – max. 6 Knodeul Etdepfx Ah Aof Module – min. 1.5 Workpiece diameter – max. 275 mm Gear width max. 5.5 mm Helix angle 0 – 60° Number of teeth 5 – 120 Transmission ratio min. 1:1 Transmission ratio max. 1:10 Cutter drive motor 20 kW Workpiece drive 14.5 kW Total power requirement 62 kVA Machine weight approx. 12 t Space requirement approx. 4.7 x 4.387 x 2.45 m Tool spindle (D-axis) - Workpiece spindle speed (stepless) 60 to 350 rpm Tool positioning axis (E-axis) - Swivel range 0 to 360° - Max. swivel speed 19.5°/s Workpiece spindle (B-axis) - Outer taper mounting diameter (1:4) 140 mm - Standard design inner taper (1:20) 99.218 mm - Max. workpiece spindle speed 300 rpm - Workpiece spindle through-hole 90 mm Workpiece positioning axis (Y-axis) - Travel path 870 mm - Max. travel speed 4.5 m/min Generating rotation axis (A-axis) - Swivel range 315° - Max. swivel speed 40°/s Axis offset (Z-axis) - Max. travel range +/- 50 mm - Max. travel speed 0.657 m/min Workpiece swivel axis (C-axis) - Swivel range -8.5 to 98° - Max. swivel speed 21.5°/s Milling depth axis (X-axis) - Travel path -25 to 640 mm - Max. travel speed 6 m/min Machine distance axis (V-axis) - Travel path 150 mm - Max. travel speed 1.6 m/min

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4059,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 110 obr/min, premer kolesa: 275 mm, TECHNICAL DETAILS Max. Wheel Diameter: 275 mm Module Range: min. 1.5 / max. 6 Tooth Width: 5.5 mm Helix Angle: min. 0° / max. 60° Number of Teeth: min. 5 / max. 120 Transmission Ratio: min. 1:1 / max. 1:10 Drive & Control Control System: SINUMERIK 840 C Max. Workpiece Spindle Speed: 110 rpm Cutter Head Speeds: 20 - 110 rpm Total Power Requirement: 100 kW Machine Weight & Dimensions Machine Weight: approx. 16.7 t Space Requirement: approx. 5,200 x 2,300 x 2,400 mm EQUIPMENT - Deburring unit U-axis / Q-spindle - Chip conveyor - Coolant system - Electrostatic air cleaner ELBARON - No tools and no workpiece clamping device included Ksdpfx Ahjv Rc Sre Aenf

Stanje: zelo dobro (rabljeno), Premer kolesa - maks. 200 mm Širina kolesa 300 mm Modul 0,5 - 25 Kedpfx Aew Ny Ulsh Asnf Razdalja med konicami 750 mm Teža stroja cca 0,2 t Potrebni prostor cca 0,8 x 0,6 x 0,6 m Naprava za preizkušanje polžev Preverja se: oblika bokov, kot tvorbe bokov, delilna razdalja osi, višina vzpona, širina zobne reže, višina zoba, tek v bokih.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 150 h, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 230 mm, merilno območje osi Y: 230 mm, merilno območje os Z: 550 mm, teža obdelovanca (maks.): 300 kg, lastna masa: 2.550 kg, TECHNICAL DETAILS Workpiece Data Module Range: min. 0.3 mm - max. 20 mm (0.1 - 20 mm) Helix / Lead Angle: min. 0° - max. 90° Inspection Diameter for Gears Between Centers: max. 400 mm Workpiece Diameter: max. 490 mm Vertical Measuring Range (Z-axis): 550 mm (700 mm) Horizontal Measuring Range / Traversing Path (X-axis): ± 115 mm Permissible Mass Moment of Inertia: max. 5 kg m² Permissible Workpiece Weight: max. 300 kg Center Distance: min. 50 mm - max. 800 mm (50 - 1,000 mm) Chart Recording Magnification: 50x / 100x / 200x / 500x / 1,000x / 2,000x / user-defined Longitudinal Magnification: 0.5x - 1x - 2x - 4x - 5x - 10x - 20x Machine Accuracy VDI/VDE 2612 part 1 and 2 as well as 2613 group I at +18 °C to +22 °C, reference temperature 0.5 K/h; 2 K/d; 2 K/m MPEE0 ISO 10360-2 (2010): 1.8 + L/450 mm VDI2631 Radial Guide Deviation: 0.2 µm Roundness Ø100/L: 0.3 µm Flick 15W/U/L: 1.5 µm Flick 50W/U/L: 1.5 µm Straightness Ø70/L: 0.4 µm Coaxiality: 1.2 µm Total Runout: 1.5 µm Machine Accuracy at +15 °C to +35 °C Reference temperature: 2 K/h; 12 K/d; 2 K/m MPEE0 ISO 10360-2 (2010): 1.8 + L/250 mm VDI2631 Radial Guide Deviation: 0.4 µm Knjdpfjxamnrsx Ah Aef Roundness Ø100/L: 0.5 µm Flick 15W/U/L: 1.8 µm Flick 50W/U/L: 1.8 µm Straightness Ø70/L: 0.6 µm Coaxiality: 1.4 µm Flatness Deviation: 1.8 µm Evaluation Software Spur gears – External and Internal Helical Gears up to 60° Standards: DIN 3960 / 3962, free tolerances, AGMA 2015, ANSI B92.1, DIN 5480, ISO 1328:1995, JIS B1702:1998, JIS B1702:2016, GBT 10095:2008, ISO 1328:2013 Functions: Profile and Tooth Flank Line, Tooth Thickness Variation, Tooth Pitch and Two-ball Measurement, Crown, Tapered, Trapezoidal and Bevel Gear Teeth Root and Tip Circle Measurements, Determination of Tip and Root Diameters over up to six teeth or up to four teeth at three measuring heights, or all teeth at one height on a special measurement sheet Gear Measurement Contact Pattern Measurement: 3 x profile and 3 x flank line Topography: 10 profiles x 10 flank lines (30 x 30 grid points) Measurement of all teeth on a separate special measuring sheet Block Gear Measurement: up to 10 gear sets Alignment Measurement: up to six gear sets as well as apex point determination Storage Formats: ASCII format, ASCII mka file, ASCII csv file (grid point deviation) Storage Capacity: up to 5,000 workpiece measurement programs MACHINE DETAILS Net Weight incl. Standard Accessories: approx. 2,150 kg Net Weight with Active Vibration Isolation: approx. 2,550 kg EQUIPMENT - PC with software installed (currently on machine) - Measuring probe and extensions included - 2x calibration spheres - Surface roughness reference standard - 2x 3-jaw chucks for different diameters - 1x measuring arbor for aligning upper and lower measuring tip - Stand for dial gauge - Driver fixture for an extended part spectrum - Transport restraints

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 118594, Rezervoar din inox, marca Stöckling Logistik, an fabricație 2002, stare tehnică și optică impecabilă, garnituri în stare excelentă. Seria: 118594, greutate 102 kg. Presiune de operare admisă: +1 bar/-0,15 bar; presiune testată +1,4 bar; temperatură maximă de operare admisă +120°C/-10°C. Kjdpfx Aotguvijh Asnf Acest rezervor din oțel inoxidabil este potrivit pentru diverse lichide alimentare sau nealimentare. Volum: 540 litri, diametru: 1.000 mm, înălțime: 1.270 mm. Echipat cu un racord mare de umplere superioară cu robinet, orificiu inferior DN 100 de evacuare/golire cu levier de închidere și capac filetat. Preț de vânzare: 1.700 Euro + TVA, negociabil, FCA Oradea, România. Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français. / Vorbim româna.

Stanje: rabljeno, Leto izdelave: 1980, Raddurchmesser - max. 2500 mm Radbreite 0 mm Modul - max. 34 Modul - min. 1 Gesamtleistungsbedarf ca. 15 kW Maschinengewicht ca. 15 t Raumbedarf ca. 4,20 x 2,00 x 2,90 m K L I N G E L N B E R G (Deutschland) Universelle Evolventen- und Schraubenmessmaschine Modell PFSU 2500 Baujahr ca. 1980 Serien-Nr. B 2918 _____ min./max. Zahnrad-Ø: 250 - 2.500 mm Modulbereich: 1 - 34 Max. Grundkreisdurchmesser: 2.400 mm Messbare Zahnlänge: 500 mm Hub des Messschlittens, ca.: 600 mm Schrägungswinkel: 0 - 45° Werkstücklänge zwischen Spitzen min./max.: 430 - 2.500 mm Werkstück-Ø in Gegenhalter: 1.340 mm Werkstücktisch-Ø: 690 mm Diagrammvergrößerung: 50/100/200/500/1000/2000 : 1 Max. zulässiges Testgewicht des Zahnrads, ca.: 10.000 kg Gesamtanschlussleistung, ca.: 15 kW - 380 V - 50 Hz Maschinengewicht, ca.: 15.000 kg Knjdet Hw Aajpfx Ah Aof Geeignet für die Messung von Zahnprofil und Zahnflankenverlauf an hochbelastbaren Gerad- und Schrägverzahnungen. Zubehör / Sonderausstattung: * Digitale Einstellung des Grundkreises und digitale Winkelverstellung ohne Grundkreisscheiben. * Längenverstellbare Halterung für Teilungsprüfgerät, jedoch ohne Prüfeinheit. * Schwere Werkstücke können auf der Maschine geprüft werden. Motorisch angetriebene Aufspannung, Ausrichtung und Prüfprozess per Tastendruck. * Gegenhalter nach hinten schwenkbar zum Beladen von Großzahnrädern und Kettenrädern, diverse weitere Zubehörteile. Zustand: Diese Messmaschine muss überholt und mit einer neuen CNC-Steuerung nachgerüstet werden. Die Grundmaschine ist jedoch in einem ordentlichen Zustand, daher lohnt sich eine Überholung. Eine Funktionsprüfung unter Strom ist nicht möglich. Teile des Bedienfelds sind nicht vorhanden.

Stanje: dober (rabljeno), vrsta aktuacije: pnevmatičen, Na voljo je pnevmatske škarje za izsek pločevine. Deluje brezhibno, rezila bi bilo treba malo nabrusiti. Vse ostale podrobnosti so vidne na slikah. Izdelek si je mogoče in priporočljivo pred nakupom ogledati v naši hiši. Za to prosimo, da se dogovorite za termin. Pri nakladanju lahko pomagamo, na voljo je primeren viličar. Z veseljem priporočimo tudi špedicijo. Obrnite se na nas. Kot je pri rabljenih strojih običajno, je vsaka garancija izključena. Za varnost pri obratovanju stroja je odgovoren kupec/upravljavec sam. Pogoji pošiljanja: EXW. Vse navedene informacije so po najboljšem vedenju in vesti. Pridržujemo si pravico do napak. Knsdpfsxl Hv Tex Ah Aef

Leto izdelave: 1983, Stanje: zelo dobro (rabljeno), številka stroja/vozila: 03.2133, Manufacturer: Arthur Klink Model: RISZ 16 x 1250 x 400 Year of Manufacture: 1983 Machine No.: 03.2133 Weight: 6,800 kg General / Technical Data: Used vertical hydraulic internal broaching machine with 3 broaching stations, in very good condition Tensile force: 16,000 kg Broaching length: 1,250 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head mounting diameter: 3 x Ø 80 mm Passage width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely adjustable from 1 m/min up to max. 10 m/min Return speed: hydraulically infinitely adjustable from 5 up to max. 25 m/min Machine footprint (W x D x H): approx. 5,500 x 2,800 x 4,900 mm (from pit bottom) Power supply / connected load: 380 Volt 50 Hz / 22 kW Kedpfx Ajd Nb A Noh Asnf Accessories / Special Features: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is designed for spring-actuated draw heads according to DIN 1417/18 for locking the broaching tools in the draw bridge. The needle ejector heads in the tool feeder are hydraulically locked. The machine is fitted with a coolant system with an integrated magnetic tape chip conveyor for pit installation. Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production; for optimal operation, a foundation (pit) is ideally required. Draw heads and needle ejectors are available on request. The machine can be inspected at our warehouse.

Stanje: rabljeno, Steel Grinding Bench, Steel Grinding Machine ULRICH KLINGEL Type HSM 4 Year of manufacture: approx. 1976 with 4 work stations Grinding wheel diameter: 1x 100; 1x 150; 2x 200 mm Grinding wheel speed: approx. 1400/2800 rpm Motor power: approx. 1 kW Power supply: 380 Volt, 50 Hz - 3x oscillating grinding table - All 3 work stations with tilting tables, infeed movement via handwheel - One work station (the 4th) with tiltable and swiveling table, infeed movement via handwheel - 1 piece diamond grinding wheel Ø 100 mm is mounted (heavily worn) - 2 pieces corundum grinding wheels mounted Ø 200 mm - Right- and left-hand rotation at each station Kjdpfxedz Srko Ah Asnf - Coolant device integrated in machine base Required space L x W x H: 1100 x 1000 x 1300 mm Weight: approx. 450 kg Good condition

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1992, obratovalne ure: 474 h, nosilnost: 1.600 kg, dvižna višina: 2.700 mm, vrsta goriva: električni, Stöcklin electric high-lift pallet truck with initial lift EHI 1600 • BRAND NEW battery • Complete with charger • Featuring initial lift • Year of manufacture: 1992 • Load capacity: 1,600 kg • Lift height: 2,700 mm • Operating hours: 474 Knodpfx Ahov Dtq Eo Ajf

Stanje: rabljeno, Leto izdelave: 1975, Wheel diameter – max. 160 - 1,600 mm Wheel width 250 mm Module – max. 20 Module – min. 1.5 Total power requirement 1 kW Machine weight approx. 3 t Space required approx. ... m K L I N G E L N B E R G Universal Gear Testing Machine for Involute and Helix Testing, Type PFSU 1600 Year of manufacture 1975, modernised in 1995 #B 2281 Working range: min./max. gear diameter: 160 – 1,600 mm Module range: 1.5 – 20 mm Maximum face width: 250 mm Measuring carriage stroke approx.: 300 mm Maximum helix angle: 0 – 90° Maximum centre distance in between centers: approx. 1,150 mm Overhang of the tailstock: 450 mm Chart recorder magnification: 50/250/500/1000 x Maximum test gear weight: approx. 4,000 kg Weight: approx. 3,000 kg Total drive: approx. 1 kW – 380 V – 50 Hz / Knedpst Hwptjfx Ah Aof Suitable for testing: - Tooth profile (involute) - Tooth direction (helix angle/lead) on internal and external gears, hobs, shaper cutters, worm gears, etc. - Tooth runout, surface roughness - Determination/reconstruction of the base circle and helix angle, etc. Accessories / special equipment: - Optical base circle setting and optical angle setting (no longer using base-circle discs) - High workpiece weight possible due to specific construction, testing sequence motorised or manual via handwheels - Rotatable mounting turntable Ø 480 mm for mounting larger gear blanks, with 2 sets of different extension supports (400 and 470 mm long) for max. gear diameter of 1,600 mm - Counterholder AV 17 for max. workpiece length of 1,150 mm - Separate electrical cabinet for control of manual movements as well as - GFM Computer Type ZMP 20 e with software for automatic gear measurement, updated in English and optionally in German, program update to current version V 21.17, ideal for generating modern test reports with graphics, graphical display on monitor, other subprograms, HP printer, flat screen - Various probe inserts, small parts, height-adjustable mount for a pitch measurement device (rear mounted), leveling feet, etc. - However, pitch measurement device not included. Mounting fixture available and installed at rear. Condition: Very good – ready for demonstration, dismantled and reassembled by specialist.

Leto izdelave: 1962, Stanje: dober (rabljeno), številka stroja/vozila: 1886, Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 10,000 kg Broaching length: 1,200 mm Number of broaching stations: 3 Distance between broaching stations: 380 mm Mounting diameter for draw heads: 3 x Ø ___ mm Passage width between cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 7 m/min Return speed: hydraulically infinitely variable from 7 up to max. 25 m/min Machine footprint (W x D x H): approx. 1,300 x 1,450 x 3,350 mm (without pit) Electrical connection / Power supply: 380 Volt, 50 Hz / 8.0 kW Accessories / Special equipment: The machine is equipped with a workpiece table featuring 3 bores for the 3 broaching stations. The tool clamping system is designed for spring-actuated locking in both the drawbridge and the feeder. The machine is fitted with an integrated coolant system. Knedpfx Ahet Dwb De Aef Remarks: The machine is designed for use in series production. For optimum operation, a foundation (pit) or optionally a platform is recommended. Draw heads and ejector needles are available on request. The machine can be inspected at our warehouse.

Leto izdelave: 1993, Stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Knodpfxjcc D Dde Ah Ajf Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.