Kellenberg nakup rabljenega (117)

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, višina središča: 125 mm, skupna masa: 4.700 kg, Ponujamo rabljeni okrogli brusilni stroj Kellenberger KEL-VISION, letnik 2004. Tip: KEL-VISION Tjdpjy Uriasfx Aiqec Maksimalna teža: 4700 kg Letnik izdelave: 2004 Št. stroja: 665100 Z robotom Universal Robots UR5 Če imate dodatna vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Kellenberger okrogla brusilka v zelo dobrem stanju. Ugodno naprodaj. Cena močno znižana !!!!! Tsdjw Dy Rqjpfx Aiqjc

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, višina središča: 125 mm, dolžina brušenja: 600 mm, premer brušenja: 249 mm, dolžina elektro omare: 1.200 mm, širina krmilne omare: 40 mm, hitrost vretena za brušenje: 1.530 obr/min, višina krmilne omare: 1.500 mm, skupna masa: 3.250 kg, For sale here is a cylindrical grinding machine from the manufacturer Kellenberger. The machine is in very good condition. Make: Kellenberger Model: R 125x600 Technical Data: Distance between centers: 600 mm Tsdpfxsyyn Ehs Aiqoc Center height: 125 mm Workpiece diameter: 249 mm Power requirement: 10 kW Table: Travel: 700 mm Travel per handwheel revolution, coarse/fine: 20/2.5 mm Hydraulic, infinitely variable speed: 0.02–6 m/min Reversal travel, minimum: 1.5 mm Dwell time at reversal, stepless: 0–5 sec Swivel range: 11° Cross slide: Travel with fine/coarse feed handwheel: 220 mm Travel per handwheel revolution, coarse/fine: 4/0.5 mm Rapid feed and return, hydraulic: 50 mm Infeed, electro-mechanical, with stepper motor: 0–9.99 mm/∅ Micro-stop for infeed, per graduation: 1 μm/∅ Plunge grinding: infeed speed coarse/fine: 1–49/0.2–2.8 μm/sec Grinding spindle headstock: Grinding wheel, diameter x width x bore: 500 x 80 x 203.2 mm Motor power: 5.5 kW Spindle speeds: 1220, 1360, 1530 rpm Workpiece spindle headstock: Swivel range: 360° Speeds, infinitely variable: 20–400 rpm Spindle internal taper: Morse 5 Motor power: 0.9 kW Tailstock: Quill internal taper: Morse 3 Quill stroke: 30 mm Machine dimensions: 2800 x 1850 mm Weight: approx. 3000 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Kellenberger 1000U, univerzalni brusilni stroj, obnovljen Tehnične podrobnosti: - razdalja med središči: 1000 mm - višina središč: 125 mm - premer brušenja: 250 mm - nagib mize: -/+ 8° - univerzalna glava brusilnega vretena - dimenzije brusilnega krožnika: 400 x 50 x 127 mm - moč motorja: 3 kW - hitrost vretena: 1500 / 1700 / 2200 - nagib držala brusilnega krožnika: 270° (3 x 90°) - premer notranjega vretena: 90 mm - nagib držala obdelovanca: 180° - hitrost vretena: 20 - 400 vrt/min - notranji stožec vretena: Morse 5 - moč motorja: 0,9 kW - notranji stožec zadnjega držala: Morse 4 - hod zadnjega držala: 30 mm - dimenzije: 2860 x 1680 x 1670 mm - teža: 2500 kg Dodatna oprema/možnosti: - avtomatski cikel delovanja - zadnje držalo - rezervoar za mazivo s črpalko - 1 notranje vreteno za brušenje - zunanji brusilni krožniki - rezervoar za hladilno tekočino z filtrom tipa papirnati trak - naprava za ostreње brusilnih krožnikov Todpfxjzxnf Ao Aiqjc - dokumentacija - itd. Stroj je delno prenovljen, vključeno: - nova geometrija - nova električna omarica - zamenjana ležaja - nova barva - itd.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, KELLENBERGER PRECIZNI UNIVERZALNI STROJ ZA KROŽNO BRUŠENJE TIPO: 1000 U LETNIK: 2000 DELNA POPRAVILA: 2026 Višina med centroma: 175 mm Dolžina brušenja: 1000 mm Oprema: - Standardna dodatna oprema - Vretenčna glava za obdelovanec, standard MK5, z adapterjem DIN 55027, velikost 5 - Zaščitni pokrov za vreteno - Podporni nastavek z mikro nastavitev, MK4 - Notranja brušna naprava s pokrovom za brušno vreteno Premer: 80 mm za vretena, ki se poganjajo s pasom - FISCHER notranje brušno vreteno, tip HJN 842 vključno z brušnimi vreteni (4 kosov po izbiri) - Vpenjalna glava HJNZ 42 - Naprava za oljno meglico za vretena HJN - STREULI magnetna filtrirna naprava za papirnate trake, tip: SPB 2 - Hladilna tekočina se dovaja skozi vretenčno glavo za obdelovanec - HEIDENHAIN digitalna merilna naprava za dolžino v osi X in Z - Sinusna merilna letva na vretenčni glavi za obdelovanec, vključno s centrirnim čepom MK5 - Permanentna magnetna vpenjalna glava, premer: 200 mm - Trikratna vpenjalna glava, premer: 160 mm Tjdpfx Ajyf E Sujiqec - Štiri kratna vpenjalna glava, premer: 160 mm - Naprava za vpenjalne klešče za Schaublinove vpenjalne klešče B32 - Komplet vpenjalnih klešč B32, premer: 1,0-30,0 mm, razmak 0,5 mm (59 kosov) - Nosilec za merilnik za nagib mize z merilnikom 1/100 mm - Fiksni nosilec za mizo - Nosilec za nastavitev za notranje brušenje - LED luč za stroj - Različni pritrdilni diski za brusilne krožnike, levi (2 kosa) - Pnevmatično razbremenjevanje zgornje mize - Nagibna naprava za nastavitev pri zunanjem, ploskovnem ali notranjem brušenju - Komplet materiala za dušenje vibracij - Nova barva v treh barvah (svetlo siva RAL 7035/modra RAL 5012/temno siva RAL 7016) - Nov protokol o prevzemu po standardu KELLENBERGER - Dokumentacija - Skladnost s CE standardom

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Prodam rabljeni Kellenberger okrogel brusilni stroj v zelo dobrem stanju. Cena močno znižana !!!!! Tjdpjw Dzbdefx Aiqec

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 23.600 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 632025, TSCHUDIN T35 – CNC High-Precision Cylindrical Grinding Machine with Siemens Sinumerik 840D Year of manufacture: 2008 · Machine no.: 632025 · Approx. 23,600 spindle hours · Includes SECKLER production cell, STREULI filtration system, DITTEL balancing system TECHNICAL DATA • Manufacturer: HTT KELLENBERGER (now Hardinge / L. Kellenberger & Co. AG) • Model: Tschudin T35 / Siemens • Machine No.: 632025 (original nameplate) • Circuit diagram: E-632025 • Year of manufacture: 2008 • Control: Siemens Sinumerik 840D with grinding software • Travel: Z 600 mm / X 350 mm • Mains voltage: 3 × 400 VAC, 50 Hz • Control voltage: 24 VDC • Connected load: 16 kVA • Weight: approx. 6,400 kg • Spindle running time (machine ON): approx. 23,600 h • Centre width (machine class): up to 400 mm • Centre height: 175 mm • Max. workpiece weight: 150 kg • Grinding wheel diameter: 400 – 600 mm • Guideways: Hydrostatic • Max. cutting speed: up to 120 m/s (roller bearing variant) INTEGRATED AUTOMATION & AUXILIARY SYSTEMS • SECKLER robot magazine – autonomous production cell (robot loading, workpiece magazine, sorting belts for good parts/SPC/rejects) • DITTEL M5000 balancing system • STREULI filter system MZ 150 (year 2005, fine filtration) CONDITION & HIGHLIGHTS Used machine, fully operational • Siemens Sinumerik 840D with grinding software • Hydrostatic guideways – precision class • Autonomous SECKLER production cell • DITTEL M5000 balancing system integrated • STREULI MZ 150 coolant filtration system • Regular maintenance by Johnson Controls documented (last in 2024, next due 04/2025) • Removed from ongoing serial production of a precision parts manufacturer ABOUT THE MACHINE The Tschudin T35 is a modular production external cylindrical grinding machine for medium and large batch sizes. Originally developed by Swiss HTT Hauser Tripet Tschudin AG, now part of the Kellenberger/Hardinge group. The machine on offer was operated in conjunction with a complete SECKLER production cell – fully automated 24/7 operation possible. The Siemens Sinumerik 840D control is equipped with grinding software developed by grinding specialists and enables optimal programming of grinding and dressing processes. The hydrostatic guideways ensure highest precision in serial production; the roller bearing version allows cutting speeds up to 120 m/s. Tedpfjy Eqiqsx Aiqec SCOPE OF DELIVERY • Tschudin T35 base machine with Siemens Sinumerik 840D • Complete SECKLER automation cell (including control cabinet) • DITTEL M5000 balancing system • STREULI MZ 150 coolant filtration system (year 2005) • Existing grinding wheel arbors LOCATION & TRANSPORT Location: Central warehouse, Köck auction house, 6178 Unterperfuss, Austria. Inspection before purchase highly recommended. All information without guarantee. Auction content is exclusively the article described. Used machine – sale excludes all warranties. Subject to errors and typographical mistakes.

Stanje: rabljeno, Premer brusilnega krožnika: 450 mm Dolžina brušenja: 1000 mm Višina med konicama: 225 mm Fotografije že dostavljenih strojev. Mehanska obnova: - Celoten stroj je bil obnovljen po protokolu za meritve Kellenberger. - Nova kabina, ki je prijazna za vzdrževanje. - Novo barvanje. Električna obnova: Tsdpozkvucefx Aiqjc - Nadzorni sistem FANUC z rešitvijo BLUE-SOLUTION. - Na novo sestavljen omarica za nadzor. - Nova tehnologija pogona. - Zamenjava vseh električnih kablov, tlačnih stikal Berus itd. - Nove absolutne steklene merilne letve v osi x in z. - Nov absolutni rotacijski dajalnik (pri osi B). Fotografije že dostavljenega stroja z drugimi možnostmi opremljanja. Varianta brusilne glave UR/RS: - Razporeditev brusilnih plošč za zunanje in diagonalno brušenje, ena za drugo! - Zato je premer vsake plošče 400 mm! - Zato je bistveno manjša nevarnost trčenja. - Enostavnejše programiranje. - Oprema brusilnih plošč: 400 x 63 x 127 mm. - Naprava za uporabo vretena z visoko frekvenco (HF). - Vreteno je na voljo kot dodatna možnost, za doplačilo. - Os B, ki jo nadzoruje CNC, za zunanje, ravno in notranje brušenje v enem vpenjalnem položaju. - Območje vrtenja: +10° / -270°. - Os C za poligonalno brušenje. - Spodnji del je fiksiran. - Motor brusilne glave: 10,0 kW. - Podpirač. - Merilni sistem Marposs za merjenje brusilnih plošč. - Longitudinalna pozicija Marposs.

Stanje: rabljeno, Leto izdelave: 2001, CNC brusilni stroj Kellenberger KEL-VARIA RS175/1000, letnik 2001 Tedsywftdopfx Aiqjc

Stanje: dober (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 31.211.014, višina središča: 225 mm, dolžina brušenja: 1.000 mm, premer brusilnega koluta: 400 mm, premer brušenja: 500 mm, premer obdelovanca med konicama: 500 mm, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Kellenberger UR 175x1000 CNC Kelco 70, v popolnem delovnem stanju. Povečanje s 175 na 225 (možno povrniti v prvotno stanje). Številka stroja: 31.211.014, leto izdelave: 1987. Priprava za notranje brušenje. Dodatna oprema: 1 x prirobnica za brusilni disk (leva) 1 x prirobnica za brusilni disk (desna) Tsdpfjyyur Ijx Aiqjc 1 x nosilec za brusilni disk z različnimi nastavki 1 x magnet za obdelovance 1 x filter za papirnate trakove Brez garancije, jamstva ali možnosti vračila. Na voljo takoj, prevzem na lokaciji. Po potrebi lahko uredimo transport.

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° +/- Grinding spindle speed: 1500, 1700, 2200 rpm Infeed, step-by-step: 0.001–0.030 mm/Ø Infeed, continuous: 0–0.95 mm/Ø Table swivelling: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Workpiece weight max. - between centres (with clamping): 130 kg Internal spindle mount: 70 mm Total connected load: 6.5 kW Machine weight approx.: 2.5 t Space requirements approx.: 4.2 x 2.0 m As a world-leading company in Kellenberger overhauls/retrofits, we are not only able to deliver machines in new-machine quality with warranty, but also offer servicing for your machines, including recently delivered units, with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle indicator Available at extra cost. Geometrically overhauled and newly painted with original electrics. Todpfxeuxftxs Aiqec The machine features central lubrication and roller guideways in the X-axis flat slideway, as well as standard air lift-off in the grinding headstock. - Digital readout on two axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with this spindle) - New, stable internal grinding attachment, diameter 80mm or 100mm, with height adjustment - Increasing centre height to max. 225mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories available on request. Note: The machine tool currently does not meet the basic safety and protection requirements as specified in BetrSichV 2015. Raising the required minimum safety targets must be determined via a risk assessment according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Required space approx. 3.6/3.5 m As a global leader in the field of Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new condition and with warranty, but also offer you service for your machines: Kellenberger Kel-Varia series with Kelco 90 control system. Mechanical overhaul: - Complete machine overhaul according to Kellenberger measuring protocol - New service-friendly enclosure - New paintwork Electrical overhaul: - New state-of-the-art CNC CYLINDRICAL GRINDING MACHINE control with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (on B-axis) Standard equipment: - WSS with MK5 taper, optionally with MK5/short taper adapter - RST with MK4 taper. Optionally with fine adjustment - Grinding spindle stocks T1/T2/T3 - T1 grinding wheel diameter 400mm - T2 grinding wheel diameter 300mm - T3 internal grinding attachment, belt-driven via grinding spindle motor - Grinding spindle motor 4.4kW - High-resolution B-axis - Marposs measuring system for grinding wheel measurement Todpfx Aijuwv H Hoqoc - Marposs longitudinal positioning - GAP Control (sensor on grinding spindle stock) ELASO integrated into the control interface - Semi-automatic balancing by ELASO integrated into the control interface - BEMAT grinding wheel measurement Options at extra cost: - HF internal grinding spindle - High-precision, maximum rigidity workpiece spindle stock - Measuring control - Extraction system - Paper band filter Control system: Grinding basic cycles - Zeroing workpiece with Z position (longitudinal positioning) - Grinding wheel measurement with BEMAT - Approach sensor GAP - Measuring dressing diamond - Corrections - External and internal cylindrical grinding (oscillation and plunge grinding) - External and internal taper grinding (swivelling the B-axis, dressing with straight wheel) - External and internal radius grinding (radius dressed onto the wheel) Optional grinding cycles: - Profile plunge grinding external and internal with profile wheel - Profile grinding external and internal with straight wheel - Single and multi-start external and internal thread grinding with freely selectable flank angle - Trapezoidal thread grinding - Non-circular grinding external and internal 15,000

Stanje: rabljeno, KELLENBERGER KEL‑VISTA UR 175/1000 je CNC okrogla brusilnica, zasnovana za natančnost, visoko natančnost in zanesljivost. Kapacitete: višina med konicami 175 mm, razdalja med konicami 1000 mm, največja teža obdelovanca 100 kg; brusilni disk Ø400×63 mm, premer izvrtine 127 mm; hod vodila 50 mm, največji nagib mize 9°. Tehnični podatki: obodna hitrost 35 m/s, vrtljaji 8–800 vrt/min (brezstopenjsko), motor brusilnega vretena 5 kW, hitri hod 12 m/min, konus vretena ASA5/MK5, mere D3200׊1700×V2000 mm. Dodatna oprema: sistem za hlajenje, papirnati filtrirni sistem, komplet brusilnih diskov. Dosega ozke tolerance; primerna za avtomobilsko industrijo, letalstvo, orodjarstvo in medicinsko tehnologijo. Tjdpsz Dvzaefx Aiqec

Stanje: zelo dobro (rabljeno), Krožna brusilnica Kellenberger 1000U z veliko dodatki, naprodaj po ugodni ceni. Stroj je v zelo dobrem stanju in popolnoma delujoč. Leta 2019 je bil kupljen kot generalno obnovljen. Cena močno znižana!!!!! Tsdpswkt Eusfx Aiqjc

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Tjdpfx Aet Ii Nusiqsc Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swivel range: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight – cantilevered: 130 kg including clamping device Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a world-leading company in the field of Kellenberger – overhaul / retrofit, we are not only able to deliver machines in as-new quality with warranty, but can also offer service for your machines. Machine geometrically overhauled and repainted with original electrics. Photo shows a recently delivered 600U. -Digital readout in 2 axes. X-axis resolution: 0.5 µm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment possible with spindle) - New heavy-duty internal grinding attachment, diameter 80mm or 100mm, with height adjustment - Increase of centre height to max. 225mm - Variable speed control for grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently fulfil the basic safety and protection requirements as specified in BetrSichV 2015. The required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding spindle head swiveling: 180° ± Grinding spindle speed: 1,500 / 1,700 / 2,200 rpm Incremental infeed: 0–40 mm/Ø Continuous infeed: 0–40 mm/Ø Table swiveling: ±6.5° Table longitudinal travel: 1,530 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg incl. clamping Maximum traverse: 270 mm Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight: approx. 3.05 t Space requirement: approx. 4 x 2 m Overhauled according to Kellenberger guidelines Including new, modern, and future-proof control system. Photo shows machine already delivered with special options. - Operation via touch panel is exceptionally simple. - Symbols on the control panel are virtually identical to the original control, thus no retraining required. - Diagnostic function showing PLC messages and digital I/O. - Dressing function can be expanded or adapted as per customer request. - Spindle-oriented stop for the workpiece spindle available on request. - New maximum infeed of 40 mm, extendable on demand. - Digital readout on 2 axes. Resolution x-axis: 0.5 μm Options: - Encoder with digital display on workpiece headstock - Encoder with digital display on grinding headstock (no height adjustment with spindle possible) - New, stable internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Further accessories available on request. Machine is equipped with an electronically controlled infeed system with stepper motor drive on the x-axis. Hydraulic table longitudinal movement and rapid traverse. Flexible application in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup for individual parts. Tsdpfxeuxftre Aiqec Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control At present, the machine tool does not meet the basic safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum protection target must be determined via a risk assessment in accordance with BetrSichV.

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Todpfeuxfupjx Aiqjc Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding head swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±8° Table longitudinal travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Cross travel max.: 270 mm Workpiece weight max. (fly): 130 kg including clamping Internal spindle mounting: 80 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Picture of a previously delivered machine. - Operation via touch panel is extremely simple. - The symbols on the control panel are nearly identical to the original system, so no extensive retraining required. - Diagnostic function with display of PLC messages and digital I/Os. - Dressing function can be expanded or modified per customer request. - Oriented spindle stop for workpiece spindle available on request. - New maximum infeed amount: 40 mm (can be optionally increased). - Digital readout on 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in workpiece headstock - Rotary encoder with digital display in grinding spindle headstock (no height adjustment with spindle possible) - New robust internal grinding attachment, diameter 80 mm or 100 mm - Increased centre height up to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Collet tube for chuck Further accessories available on request. The machine is equipped with an electronically controlled infeed system (X-axis) with stepper motor drive. Hydraulic table traverse and rapid feed. Versatile application in production for external and internal cylindrical grinding, or for combined external, face, and internal grinding in a single setup for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control system The machine tool does not currently meet the fundamental safety and protection requirements as specified in BetrSichV 2015. An assessment of the required minimum safety targets must be determined by a risk assessment according to BetrSichV.

Stanje: rabljeno, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal travel of table: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight – floating: 130 kg incl. clamping Internal spindle fitting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Available immediately, supplied with 12-month warranty as standard! Geometrically overhauled and newly painted with new electrics. In KELLENBERGER quality! Todpfx Aev I Eq Ssiqsc - Digital readout on 2 axes. X-axis resolution 0.5 µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Additional accessories available on request At present, the machine tool does not meet the basic safety and health requirements as stated in the German Industrial Safety Regulation (BetrSichV) 2015. A risk assessment according to BetrSichV must be carried out to determine the necessary minimum protection.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Tsdpfx Asuxfucsiqsc Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: rabljeno, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Machine weight approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle rebuilders - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor electrically interlocked! The internal grinding spindle can only be switched on when in position A quantum leap in safety - Infinitely variable grinding spindle speed 1000-1500 rpm - Infinitely variable internal grinding spindle speed 0-100% - Digital display of grinding spindle speeds - Swivel angle display on the upper table - Swivel angle display on the grinding spindle headstock - Marposs touch sensor for external grinding only - Marposs fluid touch sensor for internal grinding - Centre height up to 250 mm possible Machine already delivered. An identical machine can be built with additional options. The machine tool does not currently meet the essential safety and protection requirements as set out in the BetrSichV 2015. Tedpfx Aijt Ii Rrjqoc The required minimum safety objective must be determined by a risk assessment in accordance with the BetrSichV.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 650 mm Maximum grindable workpiece diameter: 360 mm Maximum load, cantilevered: 1000 N / 100 kg Maximum load between centres: 3000 N / 300 kg Z-Axis Table swivel range: 10° Table drive, hydraulic: 0–4 m/min X-Axis Infeed spindle stroke: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Infeed drive via DC motor Rapid speed: 48 mm/min/Ø Infeed cycles: Plunge cut, longitudinal grinding 4 preselectable speeds: mm/min/Ø 0.01–48 4 preselectable infeed increments: mm 0.001–0.1 Outfeed during shoulder grinding: s 0–99; 0–99 strokes Jog infeed: mm/Ø 0.001 Grinding spindle head: universal, swiveling: ° 0–180 Grinding wheel (external): D x b x d mm 500x100x127 or 203.2 Grinding wheel (face, option): D mm 250x32x76.2 Grinding wheel (internal, option): D mm (2–250) Drive power (external, face): kW 5.5 (7.5) Drive power (internal): kW 2.2 Peripheral speed (external): m/s 35 (50) Grinding wheel wear (external): mm/Ø 160 Guard width: mm 100 Grinding spindle diameter: mm 60 Internal spindle mount: mm 80 (100) Workpiece spindle head: Infinitely variable drive: Mk 4 1/min 30–270 / 50–450 Workpiece spindle lockable Spindle mount: mm MK 4/24 Spindle nose for flange mounting: MK 4 mm cylindrical Ø63H6 x 6 Workpiece headstock swiveling on turning part: ° 0–90 Tailstock: Quill mount/quill diameter: mm MK4/750 Quill stroke: mm 45 Quill force: N 100–800 / 250–1400 adjustable Quill operation: manual (foot switch) Quill fine adjustment: ±40 µm Connections: Total machine connected load: kW 6.5–10 Grinding spindle head: kW 5.5 (7.5) Workpiece spindle head: kW 0.55 (1.1) Coolant purification: kW 0.75–2.2 Guideway lubrication pump: kW 0.1 Hydraulic pump: kW 1.5 Hydraulic tank: L 80 Tedpfetqf Sqjx Aiqjc Pneumatics: bar 6 Similar to Weiss/EMAG/GP cylindrical grinding machines/Studer/Kellenberger/Schaudt/Tschudin/Tacchella/Dannobat /Bahmüller/Fortuna

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Centre height: 181 mm Centre distance: 1000 mm Max. grindable workpiece diameter: 360 mm Max. cantilever load: 1000 N (100 kg) Max. load between centres: 3000 N (300 kg) Z-axis: Table swivel angle: 10° Hydraulic table drive: 0-4 m/min X-axis: Cross slide travel: 80 mm Rapid traverse (hydraulic): 50 mm Coarse adjustment (air cushion): 280 mm Feed drive via DC motor Rapid feed speed: 48 mm/min/Ø Feed operation: Plunge grinding / longitudinal grinding 4 presettable feed rates mm/min/Ø: 0.01-48 4 presettable feed amounts mm: 0.001-0.1 Sparkout during form grinding: 0-99 s / 0-99 strokes Tip feed mm/Ø: 0.001 Grinding spindle head: Universal, swiveling 0-180° Grinding wheel (external): D x w x d mm: 500 x 100 x 127 or 203.2 Tsdpfstqf Rzex Aiqsc Grinding wheel (face; option): D x w x d mm: 250 x 32 x 76.2 Grinding wheel (internal; option): D mm: (2-250) Drive power – external/face: 5.5 (7.5) kW Drive power – internal: 2.2 kW Peripheral speed – external: 35 (50) m/s Grinding wheel wear (external): 160 mm/Ø Guard width: 100 mm Grinding spindle diameter: 60 mm Internal spindle mounting: 80 (100) mm Workpiece spindle head: Infinitely variable drive: Mk 4, 1/min: 30-270 / 50-450 Workpiece spindle lockable Spindle mount: Mk 4/24 mm Spindle nose for flange mounting: Mk 4, cylindrical Ø63H6 x 6 mm Workpiece spindle head swivels on rotary part: 0-90° Tailstock: Quill mounting/quill diameter: Mk 4/750 mm Quill stroke: 45 mm Quill force: 100-800 N / 250-1400 N adjustable Quill operation: manual (foot switch) Fine quill adjustment: ±40 µm Connection values: Total machine connected load: 6.5-10 kW Grinding spindle head: 5.5 (7.5) kW Workpiece spindle head: 0.55 (1.1) kW Coolant filtration: 0.75–2.2 kW Lubrication pump for guideways: 0.1 kW Hydraulic pump: 1.5 kW Hydraulic reservoir: 80 L Pneumatic system: 6 bar Comparable to: Weiss / EMAG / GP cylindrical grinders / Studer / Kellenberger / Schaudt / Tschudin / Tacchella / Dannobat

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 1500 mm Centre height: 175 mm Tjdst Ii Rfjpfx Aiqsc Left grinding wheel: 600 mm Grinding spindle headstock fixed, not swivelling. Equipped with new FAGOR CNC control with BEMA cylindrical grinding interface. Featuring a new, service-friendly enclosure. Fully overhauled according to Kellenberger measurement protocol.

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter: 450 mm Grinding length: 1500 mm Centre height: 225 mm Control: FAGOR EQUIPMENT - T1: 500 mm grinding wheel diameter - T2: 400 mm grinding wheel diameter - T6: Internal grinding attachment - T7: Internal grinding attachment - Spindle motor water-cooled, 9.8 kW - Marposs tool measurement - Active longitudinal positioning - Kel-Set - GAP on T1 and T2 from ELASO, contactless, integrated into the control interface - GAP on T3/T4 via fluid sensor - Semi-automatic balancing by ELASO integrated into the control interface for T1/T2 - Hydraulic tailstock with fine adjustment +/- 150 μm - Dressing device on lower table, workpiece spindle side - Dressing device on lower table, tailstock side - Dressing device on upper table - New, service- and operator-friendly enclosure SPECIAL EQUIPMENT: Workpiece spindle head with direct drive Tedeuxfu Nspfx Aiqec * Strongly recommended for non-circular grinding * Max. workpiece weight (chucked): 75 kg * Max. workpiece weight (between centers): 150 kg * Water-cooled * MK5 combined with short taper mounting DIN 55026 * Oriented spindle stop * Fixed base B-axis with direct drive, centre height 225 mm * Extremely torsion-resistant * High positioning accuracy * Resolution ° * Water-cooled MECHANICAL OVERHAUL: - Complete machine refurbished according to Kellenberger measurement protocol - Repainted New hydraulic power unit: - Improved temperature control (oil cooler) - Energy-saving: Only one pump, not running continuously! - Pressure monitoring - Monitoring of water content in hydrostatic oil (early detection of bellows damage) Hydrostatic ball screw drive in X-axis - Wear-free, as no contact during operation - No loss of accuracy, even during prolonged operation under full load at max. speed - Frictionless at low speeds - No reversal backlash when changing direction - Transmits minimal rotational movements - No stick-slip effect at low speeds - No fluctuations in friction torque due to ball circulation - Higher axial stiffness than ball screws - Significantly better damping, resulting in improved workpiece surface and tool life - No oscillations due to ball circulation - Suitable for high speeds and accelerations - Cost-effective alternative to linear motor with higher accuracy and much lower heat generation - Significantly lower power loss and no issues with chips sticking to permanent magnets - Much lower cooling requirements than linear motors Electrical overhaul: - Brand new, modern CNC cylindrical grinding control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, BERUS pressure switches, etc. - New absolute linear scales in X and Z axes - New absolute encoder (for B-axis) Control: The grinding software consists of a basic license and various options that can be enabled depending on machine equipment. Basic software: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed on the wheel) - Semi-automatic oscillation grinding - Workpiece...

Stanje: rabljeno, Grinding diameter: 350 mm Grinding length: 600 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivelling: 360° Grinding headstock swivelling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Tsdpfeuxft Esx Aiqec Incremental infeed: 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swivelling: ±10° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight in flying operation: 130 kg incl. clamping Cross travel max.: 270 mm Internal spindle mount: 80 mm Tailstock quill mount: MT3 Quill travel: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines, including new, modern and future-proof control system. Photo shows delivered machine with 1000 mm centre distance. - The operation via the touch panel is very straightforward. - The symbols on the control panel are almost identical to the original control system, making operator retraining unnecessary. - Diagnostic function with display of PLC information and digital I/O. - Dressing function can be extended or changed as per customer request. - On request, spindle orientation hold for the workpiece spindle is available. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital display in 2 axes. X-axis resolution 0.5 μm. Options: - Encoder with digital display on the workpiece headstock - Encoder with digital display on the grinding headstock (no height adjustment possible via spindle) - New robust internal grinding attachment diam. 80 mm or 100 mm - Increase centre height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Clamping tube for chuck Additional accessories on request. The machine features an electronically controlled infeed system with stepper motor drive on the X-axis. Hydraulic table longitudinal and rapid traverse movement. Versatile application in production for external cylindrical and internal grinding, or for external, face, and internal grinding in a single setup of individual parts. Optional features: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measurement control unit Note: The machine tool does not currently meet the basic safety and protection requirements as outlined in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine if the required minimum protection target can be met.