Index C 200 nakup rabljenega (137)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, moč vretenovega motorja: 22.000 W, skupna višina: 2.050 mm, skupna masa: 4.000 kg, proizvajalec krmilnikov: INDEX, model krmilnika: C200-4 / C200-8, This 5-axis turning-milling center Index G200 C was manufactured in 2000. Consider the opportunity to purchase this Index G200 C turning-milling center. Contact us for more information. Additional Equipment • Synchronous device for sub-spindle machining • Tool carrier 3 for synchronized spindle (backside machining) • Additional milling spindle • Thread milling and polygon turning attachment • Non-gripper tool changer (6 tools, HKS-50 B, KM40) • Workpiece handling WHU100 • with C-axis • No driven tools Machine Advantages Technical Advantages Dsdjyailzopfx Aflskr • Space requirement (without bar feeder): 3580 x 3108 mm • Control unit: Resolution: 0.001 mm (input/output/correction) • Extensive travel ranges with multi-axis configuration • High precision with 0.001 mm resolution on the numerical control • Versatile expansion options and additional devices for extended functionality Additional Information Movement Cross Slide 1 (upper) - XYZB axes: X-axis: Travel 155 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Y-axis: Travel 120 mm, feed force 10000 N, rapid traverse 7.5 m/min, resolution 0.0005 mm Z-axis: Travel 590 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm B-axis (rotary): 360° swivel range, angle steps 5° (with detent), resolution 0.001° (with clamping), indexing time for 180°: 1 s Cross Slide 2 (lower) - XZ axes: X-axis: Travel 105 mm, feed force 5000 N, rapid traverse 20 m/min, resolution 0.0005 mm Z-axis: Travel 307 mm, feed force 5000 N, rapid traverse 30 m/min, resolution 0.001 mm Turret Right Turret: X-axis: Travel 120 mm Z-axis: Travel 400 mm Tailstock center distance: 400 mm Max force: 5500 N Drive: Hydraulic or electric Media Power supply: 400 V, 50/60 Hz Connected load: 20-45 kVA Current consumption: 35-80 A Hydraulic system: Flow rate: 18 l/min System pressure: 90 bar Fill volume: 70 liters Coolant system: Pump output (switchable): 20 l/min at 18 bar / 50 l/min at 3 bar / 60 l/min at 5-7 bar Fill volume: approx. 230 liters Chip conveyor: Hinged belt or scraper Workpiece holder: Main spindle: DB5 internal taper / D140 external, optional short taper Sub-spindle: D140 external (only tensile force permitted with collet and chuck clamping) 1: Spindle bore (collet clamping): Variants: 30 mm / 42 mm / 60 mm / 65 mm Spindle diameter at front bearing: 75 mm (with 30 mm bore) / 85 mm (42 mm) / 100 mm (60+65 mm) Max speed: 7500 rpm (30 mm) / 6300 rpm (42 mm) / 5000 rpm (60 mm) Spindle nose: ISO 702/1 (size 4 or 5) Bar capacity (workpiece diameter): 110-130 mm (30 mm) / 140-160 mm (42 mm) / 165 mm (60 mm) Max torque (Md max 100%): 33-62 Nm (30 mm) / 35-95 Nm (42 mm) Max power (P max 100%): 7-13 kW (30 mm) / 7.5-20 kW (42 mm) Dimensions Machine Depth 3580 mm

Leto izdelave: 1997, stanje: pripravljen za uporabo (rabljen), Swing diameter: 200 mm, turning length: 400 mm, max. turning diameter: 420 mm, bar capacity: 60 mm, max. chuck diameter: 160 mm, spindle speed: 5,000 rpm, turrets: 2, stations: 2 x 14, rapid traverse X/Z: 20 m/min / 30 m/min. Machine dimensions (X/Y/Z): approx. 7,500 mm / 2,100 mm / 2,100 mm, weight: approx. 4,500 kg. Documentation available. An on-site inspection is possible. Dodpeu T Rgkjfx Afljkr

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning machine equipped with a FANUC 31i control, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium three-turret configuration: Turrets 1 and 2 each offer X, Z, and Y axes, while Turret 3 is dedicated to operations on the counter spindle. All three disk turrets are fitted with 10 stations each and support driven tools up to 6,000 rpm, allowing for highly flexible complete machining operations. With a gantry loader, conveyor belt, C-axis on both main and counter spindles, and powerful spindle drives, this machine is especially suitable for productive series manufacturing of complex turned and milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disk turrets Bar capacity: 65 mm Machine bed: vertically arranged grey cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Z-axis (counter spindle): 700 mm travel Rapid traverse Z-axis: 50 m/min Tool carriers / Turrets Equipped with 3 disk turrets, each with 10 stations. Tool system for 10 stations: DIN 69880 cylindrical shank – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (as per documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Dedicated exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment as per documentation: - Gantry loader system with numerically controlled Z-axis - Workpiece unloading from main or counter spindle to conveyor belt - Remnant part removal from the main spindle into remnant container Gantry loader: Traverse speed: 100 m/min Traverse range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Delivery rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery rate: 19 l/min Cooling unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Chip conveyor: Chip discharge height: 1,250 mm Dksdpfxoy Tmhzj Afler

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Max. turning diameter: 200 mm, max. turning length: 400 mm, spindle speed: 6,000 rpm, bar capacity: 42 mm, weight: approx. 4,300 kg. Djdpfxjtdwwqs Aflskr

Stanje: rabljeno, Leto izdelave: 2015, Tehnične podrobnosti: Premer obračanja: 65 mm Dolžina obračanja: 120 mm Nadzor: Index C200-4D SL Pomik osi Z (glavna vretena): 390 mm Pomik osi Z (protivretena): 390 mm Pomik osi X (protivretena): 600 mm Pomik osi Y1: ± 80 mm Pomik osi Y2: ± 80 mm Hitri pomiki osi X: 45 m/min Hitri pomiki osi Y: 15 m/min Hitri pomiki osi Z: 45 m/min Število vrtljajev vretena 1: 5000 1/min Moč vretena 1: 35,5/27,5 kW Navor vretena 1: 170 / 125 Nm Število vrtljajev vretena 2: 5000 1/min Moč vretena 2: 35,5/27,5 kW Navor vretena 2: 170 / 125 Nm Osi C: 0,00014 ° Premer palice: 65 mm Nos vretena: AD 140 Premer vretena: 85 mm Število vrtljajev vretena za frézanje 1: 18000 1/min Moč vretena za frézanje 1: 11 kW Navor vretena za frézanje 1: 19 Nm Število vrtljajev vretena za frézanje 2: 18000 1/min Moč vretena za frézanje 2: 11 kW Navor vretena za frézanje 2: 19 Nm Kotni premik osi B: 230 ° Navor osi B: 440 Nm Ločljivost kota osi B: 0,001 ° Revija za orodja vreten za frézanje 1 & 2: 80 HSK A40 Revija za statična orodja vretena za frézanje 2: 6 x VDI 25 Notranji dovod hladilne tekočine: Knoll 80 bar / Ecofluid Približna teža stroja: 16,3 t Dksdpoyxpadjfx Afljr Približne prostorske zahteve: 3,73x2,92x2,58 m Dodatna oprema: Transportni sistem za odrezke Hitro vpenjalna glava vretena 1 SMW HFKN 165-46 mm Hitro vpenjalna glava vretena 2 SMW HFKN 165-46 mm Vpenjalna glava s stožčastimi vložki za glavno vreteno Hainbuch Spanntop Vpenjalna glava s stožčastimi vložki za protivreteno Hainbuch Spanntop Vmesnik za podajalnik palic Unimag Kratki podajalnik palic IRCO ILS RBK 10016 Prijemnik za obdelovance za glavno in protivreteno Transportni trak za odvoz obdelovancev Ločnik oljne meglice Büchel Index R 200 je visoko natančen, večfunkcijski stroj za obračanje in frézanje. Ima 2 vreteni za obračanje in 2 vreteni za frézanje. Za oba vretena za frézanje je nameščena popolna 5-osna zmogljivost. Osi Z se nahajajo v ohiščih vreten za obračanje. Os X2 se nahaja v ohišču vretena za protivreteno. Vreteno za frézanje 1 ima v glavi osi X/Y/B. Vreteno za frézanje 2 ima v glavi osi Y/B. Vsako vreteno za frézanje ima polnovredno os B (osni premik) z 230°. Stroj je opremljen s kratkim podajalnikom palic IRCO in prijemnikom za obdelovance. Obdelovanci, ki jih stroj prime, lahko imajo največ naslednje dimenzije: Premer 65 mm Dolžina 120 mm Teža 5 kg Dolžina ostanka 200 mm Vse linearne osi so opremljene z optičnimi merilnimi lestvicami. Dovod hladilne tekočine preko glavnega in protivretena, kot tudi skozi protivreteno. Nadzor loma orodja od premera svedra 1 mm. Vseh 60 obstoječih držal za orodja HSK-A 40 je vključenih v stroj. Stroj je v odličnem stanju!

Stanje: rabljeno, Leto izdelave: 1998, Swing diameter 200 mm Turning length 400 mm Control system SIEMENS SINUMERIC 840 C Total power requirement 40 kW Machine weight approx. 6,500 kg Space requirement approx. m Djdpfx Ast Hw Rkjflekr I N D E X CNC lathe with 2 turrets, bar feeder and workpiece handling system, and SIEMENS CNC control type 840 C Type G 200, year of manufacture 1998 #810 728 _____ Bar capacity approx. 42 mm Workpiece swing diameter approx. 400 mm Chuck diameter 200 mm Turning length / centre distance approx. 400 mm Turret slide travel Z1 (longitudinal) / X1 (cross) 400 / 120 mm Turret slide travel Z2 (longitudinal) / X2 (cross) 400 / 105 mm Feed force for Z/X axis 15 Nm Rapid traverse speed, tool turret 1 & 2 22.5 m/min Turret tool stations / max. speed 14 x VDI 30 / 6,000 rpm Spindle speeds / tool speeds up to max. 7,000 rpm Maximum spindle torque 95 Nm Spindle drive / tool drive 20 / 5.5 kW Total drive approx. 40 kW - 400 V - 50 Hz Weight approx. 6,500 kg Accessories / Special equipment: • SIEMENS CNC 7-axis contouring control, type SINUMERIC 840 C, for the following axes: Turret 1 and Turret 2, C-axis, sub-spindle axis and C-axis sub-spindle, and workpiece handling type WHU with 2 linear axes and all standard options, flexible hand-held control unit, • C-axis for main spindle as well as automatic spindle switching and alignment device, • 1 sub-spindle with drive and C-axis, travel approx. 300 mm • INDEX bar loader type MBL for bars up to 3 m in length • Hydraulic collet clamping device on main and sub-spindle • 2 x tool turrets with 14 stations for VDI 30 tool mounting and 14 powered tool positions for milling and drilling operations, various tool holders, drill breakage detection in the chuck area, ideal for cross-drilling (!) • Workpiece handling system type WHU with linear gripper but without storage system • Mobile chip conveyor with coolant system, sliding door, fire extinguishing system, • Driven angular tools, approx. 20 pcs. in total, etc. Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Ponujamo vam: Proizvajalec: INDEX Tip: MS40-6 C Leto izdelave: 2019 Nadzorni sistem: Index-Steuerung C200-SL, MS40C dvojna NC enota Tehnični podatki: Glavna vretena: Število: 6 kosov Premer vretena: maks. 40 mm Maks. število vrtljajev: 7.000 vrt/min Moč (100 % / 25 %): 13 / 24 kW Navor (100 % / 25 %): 31 / 57 Nm Sinhrono vreteno: Število: 1 kos Premer vretena: 40 mm Maks. število vrtljajev: 8.000 vrt/min Moč (100 % / 25 %): 10 / 14 kW Navor (100 % / 25 %): 16 / 22 Nm Poteza sani po osi Z: 150 mm Število orodij za obdelavo zadnje strani: 3 kos Dksdezlutmopfx Afljr Kotni obseg B: 144 ° Nosilec orodja: Število: 12 kosov Poteza sani po osi X: 73 mm Poteza sani po osi Z: 120 mm Nosilec orodja, sani za obdelavo zunanjega in notranjega roba: Število: 1 kos Poteza sani po osi X: 82 mm Število orodij za obdelavo zadnje strani: 3 kos Električni priključni podatki: Nazivna moč: 85 kW Priključna moč: 101 kVA Nazivni tok: 145 A Maks. varovalka: 160 A Opomba: Omrežna napetost: 400 V Opomba: Frekvenca električnega omrežja: 50 Hz Tehnične značilnosti in dodatna oprema: - Dvojna NC enota - Signalna luč 'Smartlight' z LED - Stroj je zasnovan za priključitev na TN omrežje. - Hladilno mazivo: rezalno olje - NC možnost sinhronega vretena / obdelava večkotnih oblik, vključno z elektronskim gredom - INDEX polnilni magazin MBL40-6/3300/ploščati nosilec/50Hz: - Plovčati nosilec 50 Hz - za premer palice D13 - D40 - dolžina palice 3300 mm - z enoto za predhodno vrtanje - zaloga materiala, površina 700 mm - Profibus-DP-Master vmesnik. - 1 komplet (6 kosov) redukcijskih puš, izdelanih za premer palice oziroma kotni premer D = * mm, Notranji premer: D14 - D41 - 1 komplet (6 kosov) drsnikov za material za premer materiala D24 mm - D32 mm, sestavljen iz: - 6 drsnikov za material D23 - 6 vretennih puš D23 - 1 komplet (6 kosov) notranjih vpenjalnih puš D23 mm - za premer materiala D24 mm - D32 mm - premer predhodnega vrtanja D15 mm - 1 komplet (6 kosov) zunanjih opornih puš D23 mm - za premer materiala D24 mm - D32 mm - predobdelane - 1 komplet (12 kosov) redukcijskih puš za drsnike za material. Zunanji premer redukcijskih puš ustreza premeru materiala (D13 - D40) - 1 komplet (6 kosov) adapter puš, notranji premer: D13,5 - D40,5. Notranji premer adapter puš bi moral biti za 0,5 mm večji od premera palice. - 1 komplet (6 kosov) dvodelnih vodilnih vmesnih cevi, premer 29 mm - Pomoč pri montaži puš vodilnih vmesnih cevi - UNIMAG - vmesnik za priključitev polnilnega magazina za palice - Odvajanje delcev po drči v položaj vretena 6 - Transportni trak za obdelovance v položaj vretena 6, integriran v stroj - Hainbuch TOPlus Axfix D40 za sinhrono vreteno - Naprava za obdelavo večkotnih oblik in navojev - Prestavno razmerje i=5:1 - Induktivni dajalnik za referenčno zaznavo - interno mazanje z oljem - INDEX kratki konusni nastavek - brez pretvornika - Naprava za končno obdelavo na položaju sani 6.2 za maks. tri orodja za fiksna orodja VEČ INFORMACIJ NA SLIKAH Dodatna oprema, prikazana orodja in vpenjalne priprave so del dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih in specifikacijah, kot tudi do prodaje izdelka drugim strankam!

Stanje: rabljeno, Leto izdelave: 2011, proizvajalec krmilnikov: Siemens, model krmilnika: C200-4D SL, Description: General: Year of manufacture: 2011 Control: Siemens 840 Dsl (C200-4D SL) Bar capacity: 65 mm Milling spindles: 18,000 rpm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35.5 kW Max. torque: 170 Nm C-axis: 0.001° Z-axis: 390 mm Bar capacity: 65 mm Chuck cylinder: Hollow clamping cylinder Chuck: 3-jaw chuck Counter spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35.5 kW Max. torque: 170 Nm C-axis: 0.001° X-axis: 600 mm Z-axis: 390 mm Bar capacity: 65 mm Chuck: 3-jaw chuck Tool carrier I: Technology: Milling spindle on cross slide Speed: 18,000 rpm Tool holder: HSK 40 X-axis: 350 mm Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool carrier II: Technology: Milling spindle on cross slide Speed: 18,000 rpm Tool holder: HSK 40 Y-axis: 160 mm (+/- 80 mm) Dkjdpfxey Sq T Ss Aflor B-axis: 230° Tool magazine: Technology: Chain magazine Number of stations: 80 pcs Tool changer: Double gripper Max. tool length: 180 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system with filter Workpiece removal: Gantry loader

Stanje: rabljeno, TECHNICAL DATA - Number of spindles: 6, independently controlled - Bar capacity: 32 mm - Max. spindle speed: 6,300 rpm - Machine equipped with 28 CNC axes - Slide unit 1.1: X and Z axes CNC controlled - Slide unit 2.2: X and Z axes CNC controlled Dksdpfxjuhauyo Afljr - Slide unit 3.1: X and Z axes CNC controlled - Slide unit 3.2: X and Z axes CNC controlled - Slide unit 4.1: X and Z axes CNC controlled - Slide unit 4.2: X and Z axes CNC controlled - Slide unit 5.1: X and Z axes CNC controlled - Slide unit 5.2: X and Z axes CNC controlled - Slide unit 6.1: X and Z axes CNC controlled - Slide unit 6.2: X and Z axes CNC controlled - Counter spindle at position 6.1 EQUIPMENT - Control: INDEX C200-4 (Siemens SINUMERIK 840D) - Simple NCU - Bar feeder magazine: IEMCA SIR MS32/33/P - Coolant tank: KNOLL AE 1076 * with high-pressure pump - Chip conveyor: KNOLL VRF 500 - Part evacuation with conveyor at position 6

Stanje: rabljeno, CNC multi-spindle automatic lathe INDEX MS 32 C Dkjdsuhaqbspfx Aflsr

Stanje: rabljeno, TECHNICAL DATA SPINDLES - Number of spindles: 6 - Bar passage: 40 mm - Rotational speed: 7,000 rpm - Spindle power: 13 / 24 kW CONTROLLED AXES: 27 - Slide unit 1.1: X and Z axes, NC-controlled - Slide unit 1.2: X and Z axes, NC-controlled - Slide unit 2.1: X and Z axes, NC-controlled - Slide unit 2.2: X and Z axes, NC-controlled - Slide unit 3.1: X and Z axes, NC-controlled - Slide unit 3.2: Z axis, NC-controlled - Slide unit 4.1: X and Z axes, NC-controlled - Slide unit 4.2: Z axis, NC-controlled - Slide unit 5.1: X and Z axes, NC-controlled - Slide unit 5.2: Z axis, NC-controlled - Slide unit 6.1: Z axis, NC-controlled + SCARA axis - Slide unit 6.2: X and Z axes, NC-controlled - Slide unit 6.3: X axis, NC-controlled ELECTRICAL SUPPLY - Voltage: 400 V - Frequency: 50 Hz - Installed power: 65 kW DIMENSIONS AND WEIGHT - Footprint: 3,329 x 2,032 mm - Height: 2,654 mm - Weight: 7,100 kg OPERATING HOURS - Power-on hours: 45,965 h - Production hours: 19,065 h Dedjuhantepfx Aflekr ACCESSORIES - Siemens 840D CNC (PL) with dual NCU - 2 CNC operating panels - 6 TOPLUS collet receivers with integrated stop - 1 counter-spindle in position 6.1 - Clamping device on counter-spindle: Röhm chuck KFD-HS 110/3 - Counter-spindle internal coolant supply - CNC options for counter-spindle / polygon turning attachment - Rear machining system on slide 6.2: 3x fixed - Preparation for 2 additional operations with electronic shaft, positions 1.2.3 - Preparation for 2 additional operations with electronic shaft, positions 4.5.6 - STAUBLI robot, type TX60 (6 axes) - Robot gripper, external double clamping type PZN50 - Swiveling plate (4 positions) - KNOLL coolant tank with articulated chip conveyor, 2 HP pumps at 40 bar - Büschel oil mist extraction system - RIEDEL cooling system - ARTIS preparation

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° COUNTER SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Minimum C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X-axis travel: 350 mm - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y-axis travel: ±80 mm - B-axis stroke: 270° - Minimum B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bar loader - Number of tools in magazine: 80 - Tool change time: 4.5 s ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h ACCESSORIES - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump Dkjdpfsv Ig Avjx Afljr * with paper filter * internal coolant supply (ICS) - Chip conveyor - Spindle cooling - Parts removal

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2005, Funkcionalnost: nefunkcionalno, stružna dolžina: 600 mm, premer struženja: 140 mm, največja hitrost vretena: 5.000 obr/min, potovalna razdalja osi X: 110 mm, pomik po osi Z: 360 mm, model krmilnika: Siemens 840 D PowerLine, Hydraulic unit, main and counter spindle defective TECHNICAL DETAILS Turning diameter: 140 mm Turning length: 600 mm Distance between spindles: 615 mm Travel X-axis: 110 mm Travel Z-axis: 360 mm Travel Y-axis: 70 mm B-axis: 2x +/-1° Rapid traverse (X / Y / Z axis): 25 / 12 / 50 m/min Main spindle Maximum speed: 5,000 rpm Drive power: 20 / 27 kW Maximum torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max bar diameter: 65 mm Spindle bearing diameter: 110 mm Counter spindle Maximum speed: 5,000 rpm Drive power: 20 / 27 kW Maximum torque: 105 / 145 Nm C-axis positioning: 0.001° Chuck diameter: 140 - 160 mm Spindle nose: ISO 702/1 A5 Max bar diameter: 65 mm Travel X-axis: 150 mm Travel Y-axis: 600 mm Spindle bearing diameter: 110 mm Tool turret Quantity: 3 Tool holder: VDI 25 x 48 DIN 69880 Number of tool stations: 3 x 12 Number of driven tool positions: 3 x 12 Max speed driven tools: 6,000 rpm Drive power driven tools: 8 kW Max torque: 16 Nm MACHINE DETAILS Total power requirement: 53 kVA Dimensions & weight Space requirement: 8.0 x 3.5 x 2.5 m Machine weight: 6.5 t EQUIPMENT 2(3) Y-axes +/-35 mm Dkodpfjyxgc Nex Afler 2 B-correction axes (+/-1°) Chip conveyor Parts catcher Tool breakage control Bar feeder: IRCO Profimat 65.6

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 720052, stružna dolžina: 600 mm, premer struženja: 140 mm, prehod palice: 65 mm, model krmilnika: Siemens 840 D PowerLine, razdalja med vreteni: 615 mm, DÉTAILS TECHNIQUES Diamètre de tournage : 140 mm Longueur de tournage : 600 mm Diamètre de barre max. : 65 mm Distance entre broches : 615 mm Vitesse de broche max. : 5 000 tr/min Puissance de la broche principale : 20/27 kW Nez de broche : ISO 702/1 140 mm Diamètre du palier de broche : 110 mm Couple max. : 105/145 Nm Axe C : 0,001 Diamètre de mandrin : 140 - 160 mm Tourelle porte-outils : 3 Axes Y : 2 à 3 axes +/- 35 mm Axes de correction B : 2 axes +/-1 Positions d’outils entraînés : 3 x 12 Prise d'outil : VDI 25 x 48 DIN 69880 Puissance entraînée outils : 8 kW DÉTAILS MACHINE Commande : Siemens 840 D PowerLine Dimensions & Poids Encombrement : env. 8,0 x 3,5 x 2,5 m Poids de la machine : env. 6 500 kg Données électriques Tension nominale : 400 V AC Courant nominal : 101 A Puissance nominale : 59 kW Nombre de phases : 3 Fréquence : 50 Hz Tension de commande : 24 V DC Demande totale de puissance : 53 kVA ÉQUIPEMENT Alimentation automatique de barres Index MBL Dodpfxjxg Im Aj Afljkr

Stanje: rabljeno, Leto izdelave: 1998, Swing diameter 200 mm Turning length 400 mm Dkjdpfx Afjyqvygjler Control system Siemens Type C 200-4 840 C Spindle bore 65 mm Tool changer 2 x 14 positions Driven tools 2x turret Machine weight approx. 4 t Main and sub-spindle 3-jaw chuck with various jaws Hainbuch collets Many tool holders Various driven tools Bar loading magazine "Index MBL" Chip conveyor with coolant unit Complete set of spindle reducers etc. see photos The technical data are based on manufacturer or operator information and are thus non-binding for us. Interim sale is reserved; only our terms and conditions of business and sale apply. About us: More than 400 machines in stock Over 15,000 m² warehouse area, crane capacity 70 t More than 10,000 accessory items for your workshop If you want to sell machines, production lines, or your business, please contact us. Further offers can be found on our website. Inspections by appointment possible. We look forward to your visit. Your Markus Hirsch Team

Stanje: dober (rabljeno), Index HBF Dkeded Tx A Tjpfx Aflor hydraulic pump and oil pump bar feeder

Stanje: rabljeno, Forkardt, 2-delna vpenjalna glava, št. 1629034, premer 160 mm Index G200, vpenjalno gnezdo, premer 140 mm ZWS140-K5 Index G200 rabljeno, stanje kot na slikah, odlično iz zaloge (z majhnimi sledmi skladiščenja) Za dodatne tehnične informacije glejte slike. Obseg dobave, kot je prikazano na slikah. priložen račun Račun bo priložen pošiljki. Dodjzk Iy Rspfx Aflekr

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 402235, Premer vretena: 36 mm, maksimalna hitrost vretena: 7.000 vrt/min. Os C, 1 revolverna glava, osi X/Z, 7 položajev + sinhrono vreteno, pogonjeni orodja, 1 revolver za orodja, osi X/Z, 6 položajev, pogonjeni orodja, upravljalnik INDEX C 200-4 D, obdelava zadnje strani, odstranjevanje obdelovanca, transportni trak, odvajalnik stržkov, avtomatski podajalnik palic MBL 52/3200. Stranke morajo ustrezno odsesati in odstraniti hladilno emulzijo/maziva. Dedpfx Aezqy U Teflskr

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 511979, Dolžina obdelave: približno 400 mm, premer obdelovanca: 60 mm, os Y, protivreteno, 2 x 14-pozicijski rotacijski menjalnik orodij, križni suport X/Y/Z, nadzor osi B INDEX C 200-4 D, odvoz obdelovanca, transportni trak, odvajalnik ostankov, proizvajalec KNOLL, podajalnik palic MBL 65/3700, stroj potrebuje popravilo, zobniška črpalka je neupravljiva, stroški popravila glede na ponudbo: približno 6.000,00 € neto, stranka mora ustrezno odsesati in odstraniti vrtalno emulzijo/maziva. Dkodpfxezqy Uys Afler

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 511966, Dolžina obdelave: približno 400 mm, premer obdelovanca: 60 mm, protivreteno, 2-krat 14-pozicijski vrtljivi nastavek za orodja, križni support X/Y/Z, nadzor B-supporta INDEX C 200-4 D, sistem za odlaganje obdelovancev, transportni trak, sistem za odvajanje stružnin, proizvajalec KNOLL, podajalnik palic MBL 65/3700, stroj potrebuje popravilo, stroški popravila glede na predračun: približno 1.880,00 € neto, vrtalno emulzijo/maziva mora stranka ustrezno odsesati in odstraniti. Dodpfx Afszqy U Heljkr

Stanje: dober (rabljeno), Leto izdelave: 2001, Vrtalni avtomat INDEX ABC s krmilnikom INDEX, serijska številka 401566, leto izdelave 2001, število obratovalnih ur po ocenah vodstva približno 44.285 ur, sistem za odvajanje ostankov DGS, podajalnik palic FMB 5-42/322/A. Dedsztc Rvopfx Aflskr

Stanje: dober (rabljeno), Leto izdelave: 1998, Vrtalni avtomat INDEX ABC s krmilnikom INDEX C 200-4, serijska številka 400923, leto izdelave 1998, ocenjeno število obratovalnih ur po podatkih vodstva približno 52.924 ur, sistem za odvajanje opilkov DGS, podajalnik palic FMB 5-42. Dsdsztc Rpspfx Aflekr

Stanje: rabljeno, Leto izdelave: 1996, Vrtalni avtomat INDEX ABC s krmiljenjem INDEX, serijska številka 400923, leto izdelave 1996, ocenjeno število delovnih ur po navedbah vodstva podjetja: približno 57.805 ur, sistem za odvajanje opilkov KNOLL, podajalnik palic FMB Turbo 5-42/3200, znane poškodbe in pomanjkljivosti: okvara. Dsdpsztc N Ejfx Aflekr

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 30.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 200 mm, premer struženja: 42 mm, izvrtina vretena: 43 mm, največja hitrost vretena: 6.000 obr/min, Največji premer obdelovanca 280 mm Dkodpfozlcpvex Afler Krmilnik Siemens 2 vretenčni nastavek 2 vretena orodja, ki se vrtijo, za obdelavo na zadnjem vretenu orodja, ki se vrtijo, na vretenčnem nastavku 1 sistem za hlajenje pod visokim tlakom odstranjevalec stružnin napajalnik palic Iemca Stroj je bil v uporabi z rezalnim oljem. Geometrija stroja in natančnost sta v stanju, kot da je nov. Stroj je vklopljen in pripravljen za proizvodnjo. Na voljo so vsa navodila in priročnik. Na voljo je tudi velika izbira vpenjal za glavno in pomožno vreteno.

Stanje: rabljeno, CNC večvretenčni avtomat za struženje INDEX MS 16C. Dsdpeztk A Tefx Aflokr