Homag Cnc 5 Achs nakup rabljenega (473)

Stanje: generalkompletno obnovljen (rabljeno), PC control type Power Control Professional Software: woodWOP / TopDrill BST No. 2 throughfeed motorized conveyor belts (4 x kW [?]) No. 2 horizontal drilling supports (digital display of position data for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the lower drilling supports No. 2 upper vertical drilling supports (digital display of position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) Various spindles for each drilling unit of the upper drilling supports No. 4 upper vertical workpiece clamps Chip conveyor belt Total connected load (kW): 36 Prsdsdz Uk Tspfx Aafec

Stanje: zelo dobro (rabljeno), RETURN SYSTEM for Edgebanding Machine (LEFT) When combined with a single-sided edgebanding machine, this system allows a single operator to continuously feed the machine (the processed workpiece is automatically returned to the operator). Roller conveyor with 180° conveyor belts: 2600 mm x 1800 mm 1st Conveyor line: 7000 mm x 900 mm 2nd Conveyor line: 2500 mm x 850 mm Model: BOOMERANG BONSAI Psdpfx Aaegz Atbjfjrc

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) Podpfxogwbbqo Aaferc No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)

Stanje: zelo dobro (rabljeno), Complete factory for the production of furniture, consisting of: KZ2207) "BIESSE" FDT - CNC drilling and dowel insertion line, consisting of: Stacking station "RBO" Tornado, 2 x CNC through-feed drilling machines "BIESSE" FDT, 1 x CNC dowel insertion machine "BIESSE" SDT CN, loading station "RBO" Tornado KZ2205) Four-side sizing and edge banding line "HOMAG", consisting of: Double stacking stations "ESSE2", 1st double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, 90° rotation transfer (longitudinal/transversal) "HOMAG" TD 31/30/12, 2nd double-sided sizing and edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd 90° rotation transfer (transversal/longitudinal) "ESSE2", double loading stations "ESSE2" KZ2210) 'BREMA (BIESSE)' model Vektor CNC LINE drilling-milling-inserting, consisting of: Hedgehog loader (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various transfers KZ2090) Sander (veneer sander) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry CNC with edge banding "MORBIDELLI" Planet HP6018 (2 tables, 6 edge banding magazines) KZ2033) Edge banding machine "HOMAG" KAL 310 with stacking infeed "ESSE2" KZ2075) Furniture assembly line "TERMOPAK" with throughfeed carcass press KZ2203) Sawing line "SALVADOR" (panel crosscut + splitter) with stacking "ESSE2" KZ2009) Veneer department (double knife veneer bundle guillotine "MONGUZZI", cross-cut shears "MONGUZZI"; splicing machine "KUPER", veneer bundle guillotine "TAGLIABUE", etc.) KZ2201) Press line "COLOMBO REMO" (mm 1400x6200) for veneer/laminate KZ2215) Automatic panel storage system "ESSE2" model MAGAZZINO Prodpfx Aajh T Dvtefjc No. 3 sawdust filter stations "MION" (1st: 132 kW, 2nd: 55 kW, 3rd: 22 kW) Various vehicles (trucks, delivery vans, etc.) Many other machines (CNC BIESSE Skipper 130, drilling machines VITAP and MORBIDELLI, panel saws, adhesive applicators, etc.), extraction system, roller conveyors, racking (wall-mounted), forklifts, pallet trucks, and more. Machines are still installed at the user's site and can be inspected by arrangement.

Stanje: zelo dobro (rabljeno), Panel saw with rear lifting table infeed Control system: Power Concept Software: CADmatic 4 Professional Lifting table infeed (mm): 4300 x 2200 No. 2 rear pushers (TWIN PUSHER) model POWER CONCEPT With clamping grippers Infeed equipment for thin panels (min. thickness mm): 3 Max. cutting width (mm): 4300 Usable stroke of pusher (mm): 4300 Max. saw blade projection (mm): 95 (automatic) Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW (max. 18 kW) Adjustable saw carriage feed (m/min): 1 - 150 Front air flotation tables (qty): 4 Total connected load (kW): 28 Prjdpfxsimr Ics Aafjc OPTION: - Cut Rite software (optimization) SCHNITT PROFI (T) PACKAGE: PRACTIVE - Label printer (option) - Software LABELING PACKBR 3/4/5 (labels)

Stanje: zelo dobro (rabljeno), Laminating line also suitable for panels with 'J', 'U', 'L' profiles and 45° angles. Min/max panel dimensions: mm 260-1300 (width) x mm 1850-4250 (length) Coating: Decorative paper > 40 g/m² - 120 g/m² or PP, PET, PVC PUR adhesive (with NORDSON premelter) Psdpfswd Tcajx Aaforc Consisting of: 01) Feed station with double station 'ESSEDUE' (bridge loader) 02) Wide belt sander 'BUFTERING' Mod. SWT 955 03) Motorized roller conveyor 'HOMAG' Mod. TVL 100 04) Brushing and cleaning machine 'WANDRES'. 05) Gluing with 2 premelters 'NORDSON' for PU adhesive 06) 'HOMAG' Mod. KFK 200 machine with: - Double adhesive application system - Decoiler for rolls - Calender (roller press) - Side folding and pressing zone for excess material - Panel edge zone 07) 'HOMAG' crosscut saw 08) Stacking unit with double station 'ESSEDUE' (bridge unloader)

Stanje: zelo dobro (rabljeno), FLEXIBLE LOT-SIZE-1 PRODUCTION AND SINGLE-SIDED EDGE BANDING LINE (Right) Comprising the following machines: M.01) FEED TABLE AND AUTOMATIC WORKPIECE RETURN SYSTEM "BARGSTEDT" Model PROFI TBR100/20/30/F M.02) SINGLE-SIDED EDGE BANDING MACHINE (RIGHT) "HOMAG" Model Profi KAR350/12/A Panel thickness (min/max) mm 8 / 60 - Working width (min/max) mm 200 / 1200 Control/Software: PC 22 Feed speed (adjustable) m/min 18 - 32 Panel infeed system WZ 14/30 Jointing milling unit with CNC control (2 x 3 kW) DOUBLE glue application unit (PUR glue + pre-melter) 2 x PU 34 Pressure section (CNC-controlled) - Edge magazine for rolls (12 positions) End trimming unit WK13 (bevelled/straight, automatic adjustment) Pre-milling unit (2 x 0.55 kW) pneumatic adjustment Multi-profile milling unit (CNC-controlled) MF 21 (2 x 0.55 kW) Copy shaping unit FF 32 (4 x 0.4 kW) automatic changeover Contour milling unit (for fine finishing) CNC-controlled FK 31 (30 m/min) Recently added after technological overhaul Multi-profile scraper unit (CNC-controlled) MN 21 (servo) Finishing unit (flat scraper + buffing unit) FA 11 Psdpoinigmefx Aafjrc Universal milling unit for grooving/rabbetting and profiling UF 11 (1 x 4 kW) M.03) FEEDING AND STACKING SYSTEM "BARGSTEDT" Model TFU200/L/30/12/S

Stanje: zelo dobro (rabljeno), AUTOMATIC MULTI-BORER "WEEKE" Prodjh Ryhnspfx Aafec Machine can be integrated in line with other machines Control: Power Control Software: WoodWop (TOPDRILL BST 500) Transport belts (qty): 2 (feed speed adjustable) Horizontal drilling supports (qty): 2 Drilling units per horizontal support (qty): 2 Spindles per horizontal drilling unit (qty): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (qty): 6 Drilling units per lower vertical support (qty): 2 Spindles per drilling unit of lower supports (qty): various Upper vertical drilling supports (qty): 2 Drilling units per upper vertical support (qty): 2 Spindles per drilling unit of upper supports (qty): 2 Upper vertical workpiece clamps (qty): 6 Chip conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Stanje: zelo dobro (rabljeno), Power Control control system + CadMatic 4 Professional software Roller conveyors for the lift table feed (no.) 1 x mm 18000 + (OPTIONAL: transverse chain conveyors in the 10 t lift table 5600 mm) Lift table (mm) 5600 x 2200 VAC loading cart for gentle loading of sensitive single panels using vacuum 1st pusher saw with clamping tongs (number) 6 Rotating device (for panels) 90° 1st panel saw, max. cutting width (mm) 5600 (cutting line with air curtain) Prodpfxef Nkv Ss Aafoc Max. saw blade projection (mm) 170 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (saw diameter max / power) mm 570 (kW 30) Adjustable saw carriage feed (QS) (m/min) 1 - 150 2nd pusher saw with clamping tongs (number) 7 (+ 1) 2nd panel saw, max. cutting width (mm) 2200 (cutting line with air curtain) Max. saw blade projection (mm) 170 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (saw diameter max / power) mm 570 (kW 30) Adjustable saw carriage feed (QS) (m/min) 1 - 150 Shaking chute, chip removal conveyor, with crosscut saw (kW 19.5) 2 front air cushion tables (+ 1 additional and more) (mm 800 x 2160) Rollers in flocked design for highly sensitive materials Automatic stacking (2 transfer tables type 68/20 and type 58/24 + 3 belt conveyors: 2 x type 255/56/2 and 1 x type 27/56) Total connected load approx. 110 kW

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in one line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips/battens (min/max) mm: 0.4 - 12 Panel thickness (min/max) mm: 8 - 100 Working width (min/max) mm: 240 - 3000 Control system: Power Control PC22 (Windows XP) Software woodCommander Feed speed (adjustable) (m/min): 10 - 40 Safety and sound-insulation cabins Retractable positioning stops, distance (mm): 400 FORMAT PROCESSING (for each side): Jointing milling unit (2 x 6.6 kW) Open space Left side only: 2 x universal milling units (rotatable) (2 x 6.6 kW) Psdpfx Aaott Iudofjrc EDGE BANDING SECTION (for each side): Gluing unit (Hot Melt glue + premelter) E34 Pressure roller track (revolver type) for straight and shaped (softforming) edges, GL sextuple Edge magazine for coils (1 slot) End trimming unit WK14 (2 x 0.8 kW) 25 m/min (0°-30°) Milling unit (2 x 0.55 kW) 0°-30° Contour copying unit (tracing) FF12 (4 motors) WD70 20 m/min Profile scraping unit PN20 Finishing unit (flat scraper + buffing unit) FA11

Stanje: zelo dobro (rabljeno), Power Control control system – CadMAtic 4 Professional software Roller conveyors for feeding the lifting table (mm 32,000) Lifting table (mm) 5,600 x 2,200 VAC infeed cart for gentle loading of sensitive single panels via vacuum 1st pusher saw with no. 6 collets Turning device (for panels) up to 90° 1st panel dividing saw, max. cutting width (mm) 5,600 (cutting line with air cushion) Max. saw blade protrusion (mm) 190 Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (max. saw diameter / power) mm 600 (kW 36) Adjustable saw carriage feed (QS) (m/min) 1–130 2nd pusher saw no. 14 with collets 2nd panel dividing saw, max. cutting width (mm) 2,200 (cutting line with air cushion) Max. saw blade protrusion (mm) 190 Podpsvnq H Esfx Aaforc Scoring saw (max. saw diameter / power) mm 200 (kW 2.2) Main saw (max. saw diameter / power) mm 600 (kW 36) Adjustable saw carriage feed (QS) (m/min) 1–130 Shaker trough, chip removal conveyor belt with cross-cutting unit (kW 19.5) No. 2 front air-cushion tables (+ 1 additional and more) (mm 800 x 2,160) Rollers in flocked design for highly sensitive materials Automatic stacking (No. 2 transfer tables: No. 2 x Liftomat HAU-A 25/12) Automatic stacking system with 8 stations

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (Half Line) max. working width 2500 mm, with automatic high-speed handling system: A) DOUBLE-SIDED LOADING STATION (with 2 loading positions) BARGSTEDT TBH 270/D/25/12 B) TRANSFER TURNER (longitudinal/transverse), "HOMAG" TDL /310 /25 /12 Prodernrrbopfx Aafjc C) Double-sided sizing and edge banding machine HOMAG Model KFL526/9/A3/25 D) TRANSFER TURNER (transverse/longitudinal), "HOMAG" TDL 510/25/12 E) DOUBLE-SIDED UNLOADING STATION (with 2 unloading positions) BARGSTEDT TSH 270/D/25/12 With LINE CONTROL - WOODLINE CONTROL PC52

Stanje: zelo dobro (rabljeno), PANEL SIZING SAW ANGLE SYSTEM Control system: CadMatic 4 Professional Powered roller conveyors (No.) 1 (mm 2200 x 4400) Lifting table (mm) 2200 x 4300 1st Infeed saw with clamping grippers (No.) 4 Pedpfx Aaspuh Dkjforc 1st Panel sizing saw Max. cutting width (mm) 4300 Max. saw blade projection (mm) 125 Scoring saw (max. saw diameter / power) mm 180 (kW 2.2) Main saw (max. saw diameter / power) mm 450 (kW 18) Adjustable saw carriage feed (m/min) 1 - 150 2nd Infeed saw with clamping grippers (No.) 8 2nd Panel sizing saw Max. cutting width (mm) 2200 Max. saw blade projection (mm) 125 Scoring saw (max. saw diameter / power) mm 180 (kW 2.2) Main saw (max. saw diameter / power) mm 450 (kW 18) Adjustable saw carriage feed (m/min) 1 - 150 Front air cushion tables No. 2 (+1 additional and more) Total connected load (kW) 52.6

Stanje: generalkompletno obnovljen (rabljeno), PC control (Power Control) Software No. 2 motorised through-feed conveyor belts No. 2 horizontal drilling supports (digital display of the position data for axes) No. 2 drilling units for each horizontal drilling support (1 x 1.5 kW) No. 11 spindles for each horizontal drilling unit Maximum working width (mm): 3000 Minimum working width (mm): 250 No. 6 lower vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the lower drilling supports No. 2 upper vertical drilling supports (digital display of the position data for axes) No. 2 drilling units for each upper vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit on the upper drilling supports No. 6 upper vertical workpiece clamps Podpfx Ajvhcbzsaferc Chip conveyor belt Total connected load (kW): 50 / 60 (approx.)

Stanje: zelo dobro (rabljeno), Panel saw with rear lift table Control system: POWER CONTROL Software: CADmatic 4 Professional Lift table feed (mm): 3800 x 2200 Rear pusher (qty.): 1 With clamping grippers: 7 Rotary device (for panels): up to 90° Max. cutting width (mm): 3800 Usable stroke of pusher (mm): 3800 Max. saw blade projection (mm): 95 Scoring saw (max. blade diameter / power): 180 mm / 2.2 kW Main saw (max. blade diameter / power): 380 mm / 13.5 kW Adjustable saw carriage feed (m/min): 1 - 130 Pjdpfx Aaoh Imvhsfsrc Front air cushion tables (qty.): 3 (2160 mm x 650 mm) Total connected load (kW): approx. 28

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (First & second in a production line) Control system: (CNC) NC 21, Homatic software Safety and sound-insulated enclosure No. 3+3 vertical columns to support the working units Min. useful working width (mm): Prjdpfjh Nx U Nsx Aafjc Max. useful working width (mm): 3,000 Max. useful working thickness (mm): approx. 100 Max. workpiece length before stops (mm): 1,250 Retractable stop cams, spacing (mm): 1,000 Feed rate (min/max) continuously adjustable (m/min): approx. 8–25 No. 4 work units (for each side of the machine): 1 automatic scoring unit (approx. 1 × 1.5 kW) 1 cutting/milling unit (approx. 1 × 4.5 kW) 1 universal milling unit (electro-pneumatically controlled, approx. 1 × 4.5 kW) 1 free space

Stanje: zelo dobro (rabljeno), COMPLETE FOUR-SIDE SIZING AND EDGE BANDING LINE, max. working width 2500 mm, equipped with automatic loading and stacking system, consisting of the following machines: X04004A) Loading gantry (with 2 loading stations) “BARGSTEDT” TBH 500/D/30/14 X04004B) Workpiece turning device (90° LONGITUDINAL-TRANSVERSE) “HOMAG” Model TDR31/25/12 X04004C) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) Prsdelikvhjpfx Aafec X04004D) Separation station “BARGSTEDT” X04004E) Double-sided sizing and edge banding machine “HOMAG” Model KFR 620/19/QA/25 X04004F) 1st boring machine “WEEKE” Model BST 500 D X04004G) 2nd boring machine “WEEKE” Model BST 500 D X04004H) Workpiece turning device (90° TRANSVERSE-LONGITUDINAL) “HOMAG” Model TDR 51/25/12 X04004I) Motorized transfer conveyor “HOMAG” TR 10/70/12 X04004L) Splitting saw (Splitter) “HOMAG” Model FPR620/04/15/PS/LQ (for final cutting) X04004M) Stacking gantry (with 2 unloading stations) “BARGSTEDT” Model TSP 420/40/30/12 BA

Stanje: zelo dobro (rabljeno), ONE-SIDED EDGE BANDING AND FORMATTING MACHINE (LEFT) “SOFTFORMING” Edge material (rolls) thickness (min/max) mm 0.4 / 3 Panel thickness (min/max) mm 8 / 60 Control/software: PC 22 / WoodCommander Feed speed (adjustable) m/min 10 - 40 Side adjustment of aggregate carrier, manual mm 30 - 80 FORMATTING SECTION: Spray unit (for liquid non-stick agent) Double milling unit KD 10 (2 x 6.6 kW) Milling unit for softforming (2 x 1.85 kW) 0°-20° Sanding belt unit for straight edge KS 10 (mm 120 x 2100) Clearance (mm 700) EDGE BANDING SECTION: Gluing unit (hot melt adhesive + pre-melter) E34 softforming Pressure roller conveyor G (revolver with 4 positions) for straight and shaped (softforming) edges with upper-lower cutters (In-Lay) Edge magazine for rolls E3 (compartment No. 6) End trimming unit HL 84 (2 x 0.8 kW) 0°-30° (max 25 m/min) 1st milling unit (2 x 0.55 kW) 0°-30° (pneumatic adjustment) 2nd milling unit (2 x 0.55 kW) 0°-30° (pneumatic adjustment) Universal milling unit for grooving/rebating and profiling UF11 (1 x 4 kW) 0°-90° Profile scraper unit PN20 (pneumatic) Finishing unit (flat scrapers + polishing unit) FA11 Prjdpfx Ajt N H Tasafoc

Stanje: zelo dobro (rabljeno), Double-sided solo machine (or 1st and/or 2nd machine in a production line) Edge thickness for coils (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control system: POWERCONTROL PC23 Power Touch / WoodCommander software Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin. Retractable stop dogs, spacing (mm): 1000 Side adjustment of aggregate carrier, manual mm 30 – 80: for manual adjustment of workpiece overhang for gluing and finishing section FORMAT PROCESSING (for each side): - Protection cutter (pre-milling) (1 x 4.5 kW) - Chipping unit KD 11 (2 x 6.6 kW) + vacant space EDGE BANDING SECTION (for each side): - Gluing unit (hotmelt glue + pre-melter) A3 + QA65 - Edgeband magazine for coils (slot No. 2) - Edge pressure zone (CNC-controlled) - Type A - End trimming unit PK30 (2 x 0.8 kW), feed speed 30 m/min - Pre-milling unit BF20 (2 x 0.55 kW) - Multi-function unit (radius and contour milling) FF30 + FF32 (4 x 0.4 kW) FlexTrim - Vacant space - Scraper unit PN 20 - Finishing unit (flat scraper + smoothing unit) FA 21. Sprayer unit (for polishing fluid) - No. 3 universal milling unit for grooving/rebating and profiling SF20 (3 x 6.6 kW) (CNC-controlled) Prjdpfev Rpdnox Aafsc

Stanje: zelo dobro (rabljeno), YZ0105) PANEL SAW WITHOUT REAR TABLE, Model HPP 300/56/56 PROFILINE Control: Power Control POWER TOUCH, Software: CADmatic 4 - Professional No. 1 Rear Push Device – (PACK PREMIUM). No. 11 Clamping Grippers (1 x Power Concept) Max. Cutting Width (mm): 5600. Usable Infeed Stroke (mm): 5600. Max. Saw Blade Projection (mm): 80 Scoring Saw (max. saw diameter/power): 180 mm / 1.5 kW Main Saw (max. saw diameter/power): 350 mm / 11 kW (optionally 18 kW) Adjustable Saw Carriage Feed (m/min): 1 - 150 No. 5 Front Air Cushion Tables (mm 500 x 2810) Label Printer: PICA II 108 YZ0106) AUTOMATED PANEL STORAGE, Model TFL 211/10/05 Total Space Requirement (incl. panel saw): mm 10640 x mm 55660 Mobile Upper Bridge (X-axis) with traversing carriage (Y-axis) and corresponding vacuum suction unit (movable on Z-axis) Max. Speed of Mobile Upper Bridge (X-axis): 110 m/min Carriage Speed (Y-axis): 130 m/min Vacuum Suction Cup Assembly Speed (Z-axis): 70 m/min Podpfx Aefg Ewzoafjrc Vacuum Suction Cup Unit, rotatable by 90° Automated TLF Management System (via scanner) for cut panels (which remain in storage) Minimum dimensions: mm 800 x 2000 Stack Dimensions: Min. mm 2600 x mm 800 / Max. mm 5600 x mm 2200 Panel thicknesses (min/max): mm 12 / 40 Stack Height: mm 1000 Min. Panel Dimensions: mm 800 x 2000. Max. Panel Dimensions: mm 2200 x 5600 (ST 61)

Stanje: zelo dobro (rabljeno), EDGEBANDING AND POSTFORMING LINE for ONE-SIDED POSTFORMING PROCESSING (FOR DIRECT METHOD) Consisting of the following machines: A) Double-sided portal feed "TREVISAN" with motorized roller conveyor B) HOMAG Single-sided POSTFORMING MACHINE FOR DIRECT METHOD, Model Profi VFL79/3/P/A - Maximum laminate thickness: 0.35 mm (for L- and U-profiles) - Workpiece thickness (min/max): 16 / 30 mm (optionally up to 50 mm) Pjdpfxonzhxqo Aafsrc - Minimum workpiece width: 150 mm - Feed speed: 10 – 32 m/min - Control system: PC 22 / Software package woodCommander - 01° Standard milling unit 2.2 kW (for scoring from above) - 02° Hogging unit 15 kW (for pre-milling from above) 0° - 15° - 03° Standard milling unit 6.6 kW (for rabbeting above), motor shaft for hydro tension - 04° Standard milling unit 6.6 kW (for rabbeting below) 0° - 120° (with hydro tension) - 05° Radius milling unit 0.7 kW (for profile trimming) - 06° Milling unit for top layer on U-profiles, HSK25 1.85 kW - 07° Universal milling unit UF 11 4 kW (for grooving or rabbeting) - 08° Milling unit 2.2 kW (for chamfer and laminate overhang milling above) - 09° Milling unit 2.2 kW (for bending groove milling below) - 10° RIGHT: Standard milling unit 6.6 kW (for grooving or rabbeting), working width 160 - 1050 mm - 11° RIGHT: Milling unit above and below, 2 x 1 kW, 0° - 25° - 12° Workpiece cleaning postforming, blower 0.55 kW - 13° Laminate overhang monitoring (for detecting laminate breakout) - 14° Compact gluing unit PU34 + QA34, slot nozzle glue application - 15° Basic pressure zone for L-profile VF Direct, for workpiece thickness max 50 mm - 16° Basic pressure zone for U-profile VF Direct, for special profile R = 2.5 mm - 17° Top rotary knife - 18° Top milling unit 1 x 0.55 kW, 0° - 30° - 19° Top buffing unit with oscillation 1 x 0.25 kW C) Double-sided portal stacking system "TREVISAN" with motorized roller conveyor

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING LINE (short line), max. working width 2500 mm, with automatic high-speed conveying system: O02006A) INFEED TABLE WITH ROLLER CONVEYORS "HOMAG" PROFI TBL100/30/12 Podpev D U Ursfx Aafsrc O02006B)  ROTATION UNIT (longitudinal/transverse), "HOMAG" PROFI TDL/310/25/12 O02006C) Double-sided Sizing and Edge Banding Machine "HOMAG" Mod. PROFI KFL 526/10/A3/25 O02006D) ROTATION UNIT (transverse/longitudinal) "HOMAG" PROFI TDL 510/25/12

Stanje: zelo dobro (rabljeno), PC control Power Control Software TOPDRILL BST 500 Pjdpfx Aaeivawpefjrc No. 2 pass-through motorized conveyor belts No. 2 horizontal drilling supports (digital position display for axes) No. 1 drilling unit for each horizontal drilling support (1 x 1.5 kW) No. 21 spindles for each horizontal drilling unit Max. working width (mm): 2500 Min. working width (mm): 250 No. 4 lower vertical drilling supports (digital position display for axes) No. 2 drilling units for each lower vertical drilling support (2 x 1.5 kW) No. 11 spindles for each drilling unit of the lower supports No. 4 upper vertical workpiece clamps Chip removal conveyor belt Total connected load (kW): 20

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Roll material (edge) thickness (min/max) mm: 0.6 - 3 Panel thickness (min/max) mm: 8 - 60 / Working width (min/max) mm: 225 - 3000 Control/Software: Power Control PC 22 - Wood Commander Feed speed (adjustable) m/min: 15 - 32 Cam distance (mm): 400 EDGING PROCESSING (per side): Protection milling cutter (pre-milling) 1 x kW 4.5 Roughing unit KD 11 (2 x kW 6.6) EDGE BANDING SECTION (per side): Gluing unit (Hot melt glue + pre-melter) A3 + SERVO Edge pressure zone “A” Edge magazine for rolls (compartment No. 2) End trimming unit HL 84 (2 x kW 0.22) Pedop N D Ngspfx Aafsrc Pre-milling unit (2 x kW 0.55) Milling unit 2 x kW 0.4 Profile copying milling unit FF 12 (4 motors x kW 0.4) LEFT SIDE: 2 x Universal milling units (electro-pneumatically controlled) UF 11 (kW 4 x 2) 0°-90° RIGHT SIDE: 1 x Universal milling unit (electro-pneumatically controlled) UF 11 (kW 4 x 1) 0°-90° Multi-profile scraper unit PN10 (PNEU) Finishing unit (flat scraper + smoothing unit) FA 11

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 40 Working width (min/max) mm: 225 / 2500 Control: NC 21 / HOMATIC Feed speed (adjustable) m/min: 15 - 50 Safety and noise protection cabin Cam pitch (mm): 500 FORMAT PROCESSING (for each side): Sprayer unit (for liquid anti-stick) Protection milling unit (pre-milling) 1 x kW 4.5 Chipping unit KD 11 (2 x kW 6.6) LEFT SIDE: Universal milling unit (electropneumatically controlled) SF 20 (kW 6.6 x 1) 0°-90° RIGHT SIDE: Free space EDGE BANDING SECTION (for each side): Prsdpfx Aehvi E Ieafjc Gluing unit (hot melt + pre-melter) A3 + A34 Edge magazine for rolls (station No. 6). Edge pressure zone “A” (1 + 4 rollers) End trimming unit HL 04 (2 x kW 0.18) Pre-milling unit OPTIMAT (2 x kW 0.55) Multi-function unit (radius milling and contour milling unit) FK 11 - 2 x kW 0.4 Multi-profile scraping unit PN 20 Flat scraping unit (pneumatic) Polishing unit (2 x kW 0.25)