Deckel Fp 42 Nc nakup rabljenega (710)

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, DECKEL FP1 tool milling machine + tool cabinet with contents (tool holders and tools, see photos) Ijdpfx Ahsw Hnx Io Doih Operational. Price: €9,700 (+ VAT) Dismantling on site and transport are the responsibility of the buyer.

Stanje: rabljeno, Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, dolžina mize: 680 mm, širina mize: 380 mm, višina mize: 345 mm,

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Heidenhain Digital Readout, Infinitely Variable Feed, Very Good Condition Technical Data: >> Year of manufacture: 1978 Machine No. 2202-10163 >> Fixed angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 3.0 kW >> Spindle brake Ijdjxghtvopfx Ah Dsih >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable on spindle carrier by 150 mm >> Vertical and horizontal quill - SK40 extendable >> Draw bar system S20x2 >> Weight approx. 1,400 kg Accessories and Equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Mechanical central lubrication About the Machine: Offered is a universal milling machine Deckel FP2 in very good condition. The FP2 has minimal backlash in the handwheels and all spindles move smoothly. Even at maximum speeds, the milling machine runs quietly. On this newer FP2 model, the feed can be adjusted steplessly in all three axes; furthermore, the machine is equipped with rapid traverse on every axis. An oil change has been performed. The machine has been mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: dober (rabljeno), Leto izdelave: 1987, Deckel FP4M, orodjarni rezkalni stroj s Heidenhain 3-osnim digitalnim prikazom, fiksna miza, SK 40 vpenjalni vretena, dodatki: različne vpenjalne tule in stebla za rezkala. V dobrem delovnem stanju, pripravljen za uporabo. Po dogovoru je možen preizkus pod napetostjo. Iodpfoxmi I Ijx Ah Deih

Stanje: zelo dobro (rabljeno), Deckel FP 4 M v zelo dobrem stanju 3-osni Heidenhain z aktivnim digitalnim odčitavanjem Pomiki: X 500 Y 400 Z 400 Obrati 50 - 2500 Pomiki 8 - 630 + hitri pomik na vseh oseh Miza 460 x 800 Iisdpfxexdhpro Ah Dsh Vrtalna pinola SK 40 z M16 Teža ca. 1500 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 34496, Friedrich Deckel FP1, rabljena, v dobrem stanju Iiedpexivpwefx Ah Djh

Stanje: dober (rabljeno), Offertă o mașină de frezat universală DECKEL FP1 aktiv, parțial recondiționată, cu afișaj digital Heidenhain pe 3 axe TNC 113 și masă rotativă divizor cu mandrină cu trei bacuri. Ijdoxmgguspfx Ah Djih Construcția compactă o face ideală pentru ateliere hobby mai mici sau garaje. Producător: DECKEL Tip: FP1 Nr. de serie: 2102-3314 - Cursă de lucru X/Y/Z: 300x160x340 mm - Turație arbore principal: 40–2000 rpm - Avans continuu pe toate cele trei axe - Avans rapid pe toate cele trei axe - Cap de frezat vertical - Reglare verticală 100 mm - Dispozitiv de frezare orizontală - Afișaj digital Heidenhain 3 axe TNC113 - Sistem de răcire - Masă rotativă divizor cu mandrină 3 bacuri Putere totală instalată: 1,9 kW Dimensiunile utilajului L x l x h: 1,30 x 1,10 x 1,60 m Greutate: aprox. 850 kg Prețul este net, ex works, încărcare inclusă. Stare: folosită.

Leto izdelave: 1968, Stanje: dober (rabljeno), For sale is a Deckel milling machine from the year 1968. The machine is in good to very good condition and fully functional. (No digital readout, but can be added upon request) Technical data: - Tool holder: SK 40 - Travel X/Y/Z: 400 / 200 / 400 mm - Speed range: 40 - 2000 rpm - Vertical spindle travel: 60 mm - Horizontal spindle travel: 100 mm Iodpfx Ajihf Etjh Doih - Feeds: 8 - 400 mm/rev - Table size: 700 x 330 mm - Motor power: 2.2 kW - Connection: 400 V / 16 A plug - Weight: approx. 1300 kg All prices plus VAT Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality but affordable metalworking machine for your production? Or are you looking to sell yours? For more information or to contact us, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, in Excellent Condition, CE Compliant Technical Data: >> Year of manufacture: 1992, Machine No. 2102-6209 >> Fixed angle table (freshly planed) >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle slide, adjustable by 100 mm >> Vertical and horizontal quill – SK40 >> Drawbar system M16 Iedpexdi Ivofx Ah Djih >> Weight approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list About the Machine: Offered here is a Deckel FP1 universal milling machine, CE compliant, in very good condition. The machine exhibits minimal backlash and all spindles move smoothly. The milling machine operates very quietly even at maximum speeds. A special feature is that the electrical cabinet is connected to the machine via a plug, which makes transportation easier. In this newer FP1 model, the feed on all three axes is infinitely variable, and there is also rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain positioning control, you can enter the dimensions and the machine will automatically approach them. This FP1 was used in a training workshop and was only occasionally operated. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout facilitates your work and delivers even higher accuracy. Take advantage of the opportunity to view and test this machine on site under power.

Stanje: dober (rabljeno), Leto izdelave: 1975, Deckel FP3L with 3-axis Heidenhain digital readout, fixed table, vertical milling head, SK 40 S20x2 spindle taper. Good, ready-to-use condition. Can be demonstrated under power by prior arrangement. Isdpfx Aheuclbze Deih

Stanje: rabljeno, Funkcionalnost: nepreverjeno, številka stroja/vozila: 2820-0520, potovalna razdalja osi X: 400 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, poteza s peresom: 80 mm, dolžina mize: 700 mm, širina mize: 460 mm, največja hitrost vrtenja: 4.000 obr/min, ★★★ CNC Tool Milling Machine Deckel FP3A ★★★ ● Machine Number: 2820-0520 ● Condition: Not Tested ● Delivery Terms: Free on truck, unpacked ● Location: Sprockhövel ● Availability: Immediately ● Payment Terms: Advance payment by bank transfer Iedpfxew Aicyo Ah Deih ● Internal Ref. No.: DÖRK2 ⚙️Technical Data ☑️Control: Grundig Contour 3 ☑️Tool Holder: SK 40 ☑️Travel Paths: X 400 mm, Y 400 mm, Z 400 mm ☑️Quill Stroke Vertical: 80 mm ☑️Table Dimensions: 700 x 460 mm ☑️Vertical and Horizontal Milling ☑️Spindle Speed: up to 4,000 rpm ☑️Vertical Milling Head Adjustable on Spindle Block: 50 mm ☑️Voltage: 380 V / 50 Hz ☑️Power Consumption: 14.5 kVA ☑️Coolant System ☑️Handwheel ☑️ALLMATIC HD 160 Machine Vice Scope of Delivery ✔ ALLMATIC HD 160 Machine Vice ✔ Available manuals (as shown in pictures) Dimensions & Weights ● Installation dimensions (L x W x H approx.): 3000 x 3000 x 2200 mm ● Weight approx.: 2000 kg If you have any questions or would like to arrange a viewing, please feel free to contact us. ⚠️Also take a look at our other listings⚠️ Additional Notes: ►We expressly recommend collection by direct transport (forwarding agent) ►The goods are sold excluding any warranty ►Technical data subject to change ►Sale subject to prior sale ❗The goods are sold exclusively to businesses❗

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 2832-1076, dolžina podajanja os X: 560 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 390 mm, potovalna razdalja osi X: 560 mm, pomik osi Y: 500 mm, pomik po osi Z: 390 mm, hitrost pomika os X: 4 m/min, hitrost podajanja osi Y: 4 m/min, hitrost podajanja os Z: 4 m/min, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 40 obr/min, hitro pomikanje X-os: 4 m/min, hitri pomik os Y: 4 m/min, hitri pomik na osi Z: 4 m/min, skupna višina: 2.265 mm, skupna širina: 2.410 mm, skupna dolžina: 2.710 mm, širina mize: 530 mm, dolžina mize: 900 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, obremenitev mize: 800 kg, skupna masa: 2.890 kg, vhodna napetost: 380 V, teža obdelovanca (maks.): 800 kg, vhodni tok: 44 A, vhodna frekvenca: 50 Hz, število vreten: 2, število mest v zalogovniku orodij: 20, Oprema: dokumentacija / priročnik, Tool holder: SK 40, control: DECKEL DIALOG 11, with documentation. According to our research, the NPL01 board of the tool changer is defective. Therefore, the automatic tool changer is not operational. Otherwise, the machine is fully functional. Operating manual (machine manual 1), diagnostic manual for the DIALOG11 control, machine manual 2 (accessories), programming manuals 1-3, and electrical circuit diagrams are included. Iisdpfxswqdtpe Ah Djh The machine can be inspected under power. The machine is sold as seen. No warranty.

Stanje: rabljeno, CNC Vertical Travelling Column Bed Milling Machine DECKEL MAHO Vertical Machining Center Type DMF 220 linear Serial No.: 15115223474 Year of manufacture: 2008 CNC 3-D Path Control Heidenhain iTNC 530 Travel range X: 2200 mm, Y: 560 mm, Z: 720 mm Table size 2600 x 605 mm Table load capacity 2200 kg Table height above floor 870 mm Distance table to spindle nose max. 752 mm Spindle taper SK 40 (DIN 69871 A) - ISO40 with drawbar bolt DIN 69872 Spindle speed max. 12,000 rpm Spindle drive 35 kW at 40% duty cycle / 25 kW at 100% duty cycle Feed speed 0-20,000 mm/min Rapid traverse speed X axis 100 m/min Rapid traverse speed Y+Z axis 50 m/min Mains connection 400 Volt, 50 Hz, 73 kVA - 30-position automatic tool changer - Internal coolant supply through the spindle 40 bar (ICS) - Compressed air with minimum quantity lubrication for tool cooling - Compressed air through spindle center via M-function - 2 rotating safety glass panes - Operating mode 4, process monitoring in production - Electronic handwheel on the operator station - Separate coolant preparation unit, paper band filter with filter sump - Chip conveyor, to be slid under the working area - Centralized grease lubrication system - Operating manual - Operating hours - control on = 75188 h Ijdpfx Aow Iqt Ash Deih - Operating hours - program run or spindle on = 31632 h - Control system with interfaces for data transfer, RS232C + USB Installation area L x W x H 650 x 400 x 280 cm Footprint of the main machine L x W x H 490 x 395 x 275 cm (with operator panel) Space required for chip conveyor L x W x H 550 x 90 x 160 cm (approx. 500 kg) Space required for coolant preparation unit L x W x H 180 x 115 x 190 cm (500 kg) Transport dimensions main machine L x W x H 500 x 248 x 275 cm Additional transport space required for further components 550 x 240 x 250 cm Weight of main machine approx. 12.5 tons Good condition

Stanje: rabljeno, Geldmacher MST / Deckel FP4M Milling Machine – Toolroom Milling Machine Weight: approx. 1,450 kg Year of manufacture: 2012 Installation dimensions: Reference value: approx. 2,500 × 2,700 × 2,100 mm (Length × Depth × Height) Travel paths: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Iedpfexcldkjx Ah Dsih Spindle Taper / Tool Holder: ISO SK 40 Quill travel: Vertical quill: approx. 90 mm extension; in addition, the vertical milling head is movable along the spindle carrier Spindle speed range: approx. 50 – 2,500 rpm Feed rates: Feed: approx. 8 – 630 mm/min; rapid traverse (maximum feed rate) approx. 1,300 mm/min The machine is in very good condition. You are welcome to arrange an inspection. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. A net invoice can be provided for foreign customers, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and take a look at our other offers as well. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may differ and errors in the description are subject to change.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Light Grey Paint, CE Compliant! Technical Data: >> Year of manufacture: 1987 Machine no. 2203-2790 >> Fixed angular table (newly planed) >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier, 150 mm >> Vertical and horizontal quill - SK40 taper >> Vertical quill travel: 90 mm >> Drawbar system M16 >> Weight approx. 1500 kg Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system Iiedpfoxctyaex Ah Dsh >> Chip tray >> Central lubrication About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine is partially overhauled, has minimal backlash, and all spindles move smoothly and evenly. The milling machine runs quietly even at maximum speed. Rapid traverse is available on all axes, and all bellows are new. The fixed angular table has been newly planed. A reliable and user-friendly machine. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: dober (rabljeno), Leto izdelave: 1975, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout, adjustable angle table, SK 40 spindle taper. Accessories include various collets and milling arbors, as well as a tailstock. Machine is in good operational condition and can be demonstrated under power by prior arrangement. Iijdsu Ezb Ejpfx Ah Doh

Stanje: rabljeno, Protinastavek in adapter za rezkalni stroj za horizontalno rezkanje Protinastavek in adapter (kontradržalo) za rezkalni stroj DECKEL (Nosilni blok z lastovičjim vpenjalnim adapterjem DECEL FP1 + FP2) Tip 9570 Širina ozkega lastovičjega repa: ca. 72 mm Širina širokega lastovičjega repa: ca. 88 mm Višina lastovičjega repa: ca. 15 mm Dolžina (nosilni blok): 133 mm Širina (nosilni blok): 50 mm Iedsxcbl Djpfx Ah Doih Skupna višina (nosilni blok): 105 mm Ležajna izvrtina: Ø 17 mm (z bronasto ležajno pušo) Razdalja osi izvrtine do nosilne površine lastovičjega repa: ca. 82,5 mm (višina konice) - Adapter, primeren za lastovičji rep in vpenjalno površino, povečanje za 22,5 mm na višino konice 105 mm Skupna dolžina (lastovičja letev): 635 mm Teža: 3,8 kg zelo dobro stanje

Stanje: dober (rabljeno), Leto izdelave: 1989, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 M16 spindle taper. Good, operational condition. Can be demonstrated under power by arrangement. Iijdpotp Nyfsfx Ah Doh

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper and S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by prior arrangement. Iedpewg S Nksfx Ah Deih

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK 40 spindle taper. Good operational condition, can be demonstrated under power by prior arrangement. Iiedswg S I Tspfx Ah Deh

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP3 orodjarska rezkalna stroj z 3-osnim Heidenhain digitalnim prikazovalnikom, togim mizo, vretenom SK 40, dodatki: različne napenjalne tule in držala rezk, nasprotni nosilec. V dobrem, takoj uporabnem stanju. Po dogovoru možno predstavitev pod napetostjo. Iiedpfsxdr Uxex Ah Doh

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 spindle taper, S20x2 spindle mounting. Good, fully operational condition; can be demonstrated under power by prior arrangement. Isdjuvgnqopfx Ah Dsih

Leto izdelave: 1981, Stanje: dober (rabljeno), Deckel FP1 2-axis universal milling machine with Heidenhain digital readout and tilting/swivel table. SK 40 spindle taper. Machine is in good, fully operational condition. Can be demonstrated under power by prior arrangement. Iodpjhg Embjfx Ah Doih

Leto izdelave: 1980, Stanje: dober (rabljeno), Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK 40 spindle taper. Good operational condition, can be demonstrated under power by prior arrangement. Iijdpfx Aod Id N Reh Deh

Leto izdelave: 1975, Stanje: dober (rabljeno), Deckel FP1 universal milling machine, 2-axis Sony digital readout, dividing head SK40, SK 40 spindle taper vertical, SK 40 horizontal, Accessories: various collets and cutter arbors, tailstock, Good operational condition. Can be demonstrated under power by appointment. Isdpsrhzcqsfx Ah Doih