Deckel Fp 42 Nc nakup rabljenega (710)

Stanje: rabljeno, Leto izdelave: 1980, X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Tool holder: SK40 Spindle speed: 40-2000 rpm Control: Aktiv HEIDENHAIN Table size: 600 x 210 mm Total power requirement: 2 kW Machine weight: approx. 0.73 t Space requirements: approx. 1200 x 1100 x 1600 mm (LxWxH) - Power feed in X and Z axes - Röhm vice Ijdpfx Ahow A Ap Hs Doih - Coolant system - Several tool holders and clamping devices - Operating manual

Stanje: dober (rabljeno), Leto izdelave: 1986, 1 rabljeni univerzalni orodni rezkalni stroj Proizvajalec: Deckel Tip: FP 1 z aktivnim digitalnim prikazovalnikom Heidenhain Tehnični podatki: X-pomik: 300 mm Y-pomik: 160 mm Z-pomik: 340 mm Vpenjalni konus: SK 40 Velikost mize: 600x210 mm Hitrosti vretena: 40–2000 min⁻¹ Teža stroja pribl.: 1 t Prostorska zahteva pribl.: 1,6x1,3x1,8 m Iijdjwuu Sdopfx Ah Doh

Stanje: rabljeno, Universal Milling Machine DECKEL Type FP 1 Machine No. 52185 Year of manufacture: 1968 Travel range X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 250 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40-2000 rpm, 16 steps Iedpfodzqb Ssx Ah Djih Motor power 1.0 and 1.4 kW, pole-switchable Power supply 380 Volt, 50 Hz - Powered feed on X and Z axes - Two motor speeds and 8 gear stages - Quill travel on vertical milling head 60 mm - Fixed angle table - Coolant system integrated in machine base - Separate control cabinet - Support bracket with counter bearing for horizontal milling SK 40 Required floor space (L x W x H): 1200 x 1100 x 1600 mm Weight approx. 1000 kg In very good condition

Stanje: dober (rabljeno), DECKEL - FP2 with New Three-Axis Digital Readout from Educational Facility - Well-maintained original condition - Travel X/Y/Z: 400x200x400mm - 3-axis digital readout "NEW" - Swivel table – clamping surface 700x350mm - Speed range: 40–2000 rpm - Automatic feeds on all three axes - Rapid traverse on all three axes - Tool holder: ISO 40 - Vertical and horizontal milling setup - Swiveling vertical head with quill - Coolant system - Spindle nut X-axis "NEW" - Machine feet - Machine vice "RÖHM" - Various tool holders Ijdpfx Ahewtbq Ds Dsih - Chip pan / machine base - Documentation included Dimensions: LxWxH: 1.5 x 1.7 x 1.8 meters / Weight: 1500 kg Errors and omissions excepted.

Leto izdelave: 2019, Stanje: pripravljen za uporabo (rabljen), A Deckel FP2 universal tool milling machine, completely overhauled in 2019, is available. Travel range X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Iodpfx Asvf Iy Djh Dsih

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2102-2783, Deckel FP 1 Aktiv milling machine with Heidenhain TNC113 digital readout in very good condition. Technical specifications: * Year of manufacture: 1985, Machine No. 2102-2783 * Rotary/swivel tilting table * Spindle speed: 40 - 2000 rpm * Infinitely variable feed in 3 axes * Rapid traverse in 3 axes * Spindle brake * Travel X/Y/Z: 300/160/340 mm * Vertical milling head can be shifted 100 mm on spindle carrier * Vertical quill * Tool clamping system: SK40/S20x2 * Weight approx. 800 kg Accessories and equipment: * 3-axis digital readout Heidenhain TNC113 * Coolant system * Central lubrication * Operating manual, spare parts list The Deckel FP 1 Aktiv milling machine offered is in very good condition. Iodpfop Sqyuox Ah Doih All spindles move smoothly and have minimal backlash. All guides have been disassembled, checked, and are in as-new condition. The machine runs very quietly at all speeds. All bellows, scrapers, roller shutters, etc., are in very good or new condition, and an oil change has been performed. Mechanically and electrically fully inspected. You are warmly invited to view and test this machine and see for yourself the like-new condition.

Stanje: rabljeno, Leto izdelave: 1980, x-axis travel 300 mm y-axis travel 160 mm z-axis travel 340 mm Tool holder SK40 Spindle speed 40-2000 rpm Control unit: HEIDENHAIN Aktiv Table size 600 x 210 mm Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. LWH 1200x1100x1600 mm - Powered feed on X and Z axes Isdpfxsw A Apys Ah Dsih - Additional swivelling table 600 x 210 mm - Coolant system - Counter bearing for horizontal milling - Various tool holders, clamping devices, and milling cutters included - Operating manual

Stanje: dober (rabljeno), 1 rabljeni univerzalni orodni rezkalni stroj Znamka: Deckel Tip: FP 2 Digitalni prikazovalnik: 3-osni aktivni digitalni prikazovalnik HEIDENHAIN Pomik X-os: 400 mm Pomik Y-os: 220 mm Iodpewuu Rasfx Ah Djih Pomik Z-os: 400 mm Vpenjalni sistem orodja: SK 40, izvlečni navoj S 20 x 2 Tip rezkalne glave: vertikalna rezkalna glava Območje vrtljajev: 25–2.500 min⁻¹, 21 stopenj Tip mize: fiksna miza Uporabna površina mize: 700 x 280 mm T-utor: 12 mm Teža: pribl. 1.400 kg Dimenzije: pribl. 1.600 x 1.350 x 1.800 mm Dodatki: Aktivna funkcija v X-, Y- in Z-osi Hladilna naprava Centralno mazanje, ročno upravljanje Navodila za uporabo

Stanje: rabljeno, Universal tool milling machine DECKEL type FP 1 Machine No. 28317 Year of manufacture: approx. 1960 Travels X: 245 mm Y: 150 mm Z: 340 mm Table size 600 x 210 mm Horizontal spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 0.8 and 1.1 kW, pole-changing Power supply 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and 6 gearbox steps - Feed on X and Z axes - Coolant system with mechanical pump integrated in the machine base - Quill travel on the vertical milling head 60 mm Iodpfjiy Ekvjx Ah Doih - Vertical milling head swivels +/- 90° - Metal base made of angle iron with machine feet Space required (L x W x H): 1100 x 900 x 1650 mm Weight: 650 kg In good condition

Stanje: dober (rabljeno), Orodjarski rezkalni stroj DECKEL FP 1 - Hodi X/Y/Z: 245x150x340 mm - Fiksna kotna miza: 600x210 mm - Vpenjalni stožec: MK 4 - Sprejem za napenjalne tule z vključenim kompletom napenjalnih tulcev - Območje vrtljajev: 95–1900 obr/min / 12 stopenj - Pomiki osi X in Z Iiedpfsw I Ty Sex Ah Doh - Horizontalna/vertikalna rezkalna naprava - Pomik pinole navpične rezkalne glave cca 60 mm - Navpična rezkalna glava nagibna +/- 90° - Noge stroja - Razno orodje – glejte slike - Dokumentacija Dimenzije: D x Š x V: 1,1 x 0,9 x 1,7 m / Teža 650 kg Možne napake in spremembe podatkov.

Stanje: rabljeno, Leto izdelave: 1976, x-travel 350 mm y-travel 150 mm Isdpfjwwwr Eox Ah Djih z-travel 340 mm Table clamping surface 600 x 210 mm Spindle taper SK 40 Spindle speeds 40 - 2000 rpm Feeds 5 - 500 mm/min Rapid traverse 1.2 m/min Total power requirement 1.9 kW Machine weight approx. 0.7 t - Machine from training workshop - Accessories: fixed table, vertical head with extendable quill, 3-axis HEIDENHAIN digital readout, various short and long arbors, various collets, original DECKEL tool cabinet

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2102-2641, Deckel FP 1 Aktiv milling machine with Heidenhain TNC113 digital readout in very good condition, with original paintwork. Technical specifications: * Year of manufacture: 1985, Machine No. 2102-2641 * Swivel/tilt/rotary table * Spindle speed: 40 - 2000 rpm * Infinitely variable feed in 3 axes * Rapid traverse in 3 axes * Spindle brake * Travel X/Y/Z: 300/160/340 mm * Vertical milling head adjustable on spindle support by 100 mm * Vertical quill * Tool clamping system SK40/S20x2 * Weight: approx. 800 kg Accessories and equipment: Ijdpfsf E Ilzox Ah Djih * 3-axis digital display Heidenhain TNC113 * Coolant system * Operating manual, spare parts list The offered Deckel FP 1 Aktiv milling machine is in very good condition. All spindles move smoothly with minimal backlash. All guides have been inspected and are in very, very good condition. The machine runs smoothly at all speeds. All bellows, wipers, rollers, etc. are in excellent or new condition; oil change has been performed. Mechanically and electrically tested. You are warmly invited to inspect and test this machine and see its excellent condition for yourself.

Stanje: zelo dobro (rabljeno), Deckel FP 4 M v zelo dobrem stanju originalna barva, vodila in miren tek v najboljšem stanju 3-osni digitalni merilni sistem Heidenhain Pomiki: X 500 Y 400 Z 400 Obrati 50 - 2500 Podajalne hitrosti 8 - 630 + hitri pomik v vseh oseh Miza 460 x 800 Vrtalni vreteno SK 40 z M16 Teža cca 1500 kg Dodatki: 15 držal orodja SK 40, strojski primež z vrtljivo ploščo, vpenjalno območje 150 x 300 hladilna naprava, posoda za ostružke, vretena zavora, strojne noge, centralno mazanje, celotna dokumentacija. Iiodpfjwzlxujx Ah Djh Stroj je seveda mogoče videti pod napetostjo Prosto naloženo, D - 88433 Schemmerhofen

Stanje: zelo dobro (rabljeno), Digital display Travel paths X/Y/Z: 400 x 200 x 400 mm Table size: 700 x 330 mm Tool holder: ISO 40 Hydraulic vice Isdewn Td Espfx Ah Djih Completely overhauled in 2019

Stanje: rabljeno, Universal Tool Milling Machine DECKEL Type FP 1 Machine No.: 34338 Year of manufacture: approx. 1965 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size: 600 x 200 mm Spindle taper: MK 4 - S20 x 2 Vertical spindle speed: 95-1900 rpm, 12 steps Horizontal spindle speed: 60-1200 rpm, 12 steps Motor power: 1.0 and 1.5 kW, pole-changeable Electrical connection: 380 Volt, 50 Hz - 3-axis digital display HEIDENHAIN, type VRZ 753 B - Spindle speed via 2 motor speeds and 6 gearbox steps - Power feed on X and Z axes - Coolant device with mechanical pump in machine base - Quill stroke on vertical milling head: 60 mm - Swivelling, rotating and tilting angle table - Separate control cabinet Required space L x W x H: 1000 x 900 x 1750 mm Iedjic R I Rspfx Ah Djih Weight: 690 kg Good condition

Stanje: dober (rabljeno), Deckel FP1 Universal Milling Machine - Travel distances X/Y/Z: 245 x 150 x 340 mm - Supplied without vertical head / Machine was exclusively used for horizontal milling operations - Speed range: 95 – 1900 rpm - Built-in rotary table - Automatic feeds on X & Y axes - Various collets included - Documentation available Iedpfx Ahowpruxo Doih Dimensions: L x W x H: 1.1 x 0.9 x 1.6 meters / Weight: 650 kg Errors and omissions excepted.

Leto izdelave: 1978, Stanje: generalkompletno obnovljen (rabljeno), Universal tool milling machine Make: DECKEL Model: FP 1 with infinitely variable feed Year of manufacture: approx. 1975 – partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 250 mm (T-slot: 12 mm) - Vertical milling head ISO 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual Iiedpfx Asdf E H Aoh Djh - used, as seen -

Stanje: rabljeno, Universal tool milling machine DECKEL Type FP 1 Mach. No. 33064 Year of manufacture: approx. 1960, overhauled in 2012 Travel paths X: 300 mm Y: 150 mm Z: 330 mm Table size 600 x 210 mm Spindle taper MK 4 - S20 x 2 Vertical spindle speed 95-1900 rpm, 12 steps Horizontal spindle speed 60-1200 rpm, 12 steps Motor power 1.1 and 1.4 kW Iiodpjdzp T Ejfx Ah Djh Power supply 380 Volt, 50 Hz - Feed on X and Y axes - Quill adjustment on vertical milling head - Fixed angle table - Coolant system with mechanical pump in the machine base - Separate control cabinet with cable and plug connection Required space L x W x H 1100 x 900 x 1600 mm Weight approx. 900 kg Good condition Machine was overhauled in 2012.

Stanje: dober (rabljeno), Orodjarska rezkalna naprava DECKEL FP 1 s 3-osnim aktivnim digitalnim prikazovalnikom TNC 113 iz izobraževalne ustanove - Hodi X/Y/Z 300x160x340 mm - Območje vrtljajev 40-2000 vrt/min - Brezstopenjski pomik v vseh treh oseh - Hitri pomik v vseh treh oseh - Navpična glava pomična za 100 mm - Navpična - vodoravna rezkalna naprava - Orodni vpenjalni sistem ISO 40 - Pogonska moč 1,5 / 1,9 kW - Tog kotni stroj - Posoda za ostružke - Hladilna naprava - Delovna svetilka - Dokumentacija Dimenzije: Iiodpfow Rbxnjx Ah Doh D x Š x V 1,3x1,2x1,7 m / Teža 900 kg Možne so napake ali tipkarske napake

Leto izdelave: 1976, Stanje: generalkompletno obnovljen (rabljeno), Universal tool milling machine Manufacturer: DECKEL Model: FP 3 Iedpfxod S Hzts Ah Djih Year of manufacture: 1976 – overhauled, newly painted RAL 7035 light grey / RAL 7012 basalt grey RAL 5008 grey blue Machine no.: 1601 Milling head type: 2027 Milling head number: 1483 with warranty Geometric acceptance with inspection protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 800 x 420 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Central lubrication, manual actuation - Coolant device - Operating instructions -Used, as seen-

Stanje: rabljeno, Universal tool milling machine direct from liquidation Milling machine DECKEL Type FP 4 Machine No. 1 Year of manufacture: 1978 Travel range: X: 700 mm, Y: 400 mm, Z: 450 mm Table clamping surface: 860 x 500 mm Spindle taper: SK 40 - M16 Spindle speed: 31.5 - 1600 rpm, 18 steps Quill travel: horizontal and vertical Main spindle drive: 4 kW Power supply: 380 Volt, 50 Hz - 3-axis digital readout HEIDENHAIN - Universal swiveling, tilting and rotary table Iodpfxjv Srf Dj Ah Dsih - Coolant system integrated in the machine base - Machine vice - Supplied without tools Space requirements (L x W x H): 2100 x 1750 x 1900 mm Weight: approx. 3 tons.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1987, Universal milling machine Brand: DECKEL Model: FP 1 Aktiv Year of manufacture: 1987 – overhauled, newly painted, Iedpfohtrd Ijx Ah Deih RAL 7035 light grey / RAL 7012 basalt grey Machine no.: 2102-3429 with warranty geometric inspection with test report Accessories: - 3-axis digital readout HEIDENHAIN TNC 113 with active function for X, Y, and Z axes - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Centralized lubrication, electric - Operating manual - used, as seen -

Leto izdelave: 1982, Stanje: generalkompletno obnovljen (rabljeno), Universal tool milling machine Brand: DECKEL Ijdpfx Ahepn Rgvj Doih Model: FP 3 Aktiv Year of manufacture: 1982 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2201-5539 with warranty Geometric inspection with test protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread M16 - Central lubrication, manually operated - Coolant system - Operating manual Used, as seen The machine corresponds technically to the standard of its year of manufacture.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal Tool Milling Machine Make: DECKEL Model: FP 3 LV Aktiv Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2309-0146 Milling head type: 2271 Milling head no.: 700-0887 Warranty: 12 months, single-shift operation from delivery date, covering the mechanics overhauled by us. Electrical and electronic components are excluded, as they have only undergone a functional test. For machines located outside our North Bavarian sales territory, travel expenses are to be borne by the customer. Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawbolt thread M 16 - Central lubrication, manual - Coolant system - Operating instructions Iisdstdnb Eepfx Ah Deh Used, sold as seen. The machine is technically in accordance with the standard from the year of manufacture.

Leto izdelave: 1976, Stanje: delavnici obnovljeno (rabljeno), Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – workshop-inspected Machine no.: 53426/08 Geometric inspection with test report Accessories: - 3-axis digital readout Heidenhain ND 750 - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system Isdpfx Ahjflc N Ae Dsih - Steady rest with counter bearing - Operating manual - used, as seen, however without any warranty -