Deckel Fp 42 Nc nakup rabljenega (705)

Stanje: dober (rabljeno), Leto izdelave: 1989, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 M16 spindle taper. Good, operational condition. Can be demonstrated under power by arrangement. Hodotp Nyfspfx Abhjh

Stanje: zelo dobro (rabljeno), Leto izdelave: 1975, O F F E R We can offer you, without obligation and subject to prior sale, the following from stock: DECKEL Universal Tool Milling Machine Type FP 2 Year of Manufacture ca. 1975 _____ Table travel: longitudinal motor/manual 390 / 400 mm vertical motor/manual 390 / 400 mm cross motor/manual 190 / 200 mm Fixed angle table 250 x 700 mm Installation height under spindle 400 mm Spindle overhang (quill travel) approx. 165–465 mm Spindle taper SK 40 18 spindle speeds 40–2,000 rpm Infinitely variable feed rate 5–400 mm/min Rapid traverse 1,200 mm/min Spindle drive 2.2 kW Total drive power 2.5 kW - 380 V - 50 Hz Weight 1,000 kg Accessories / Special Equipment • DECKEL universal swivelling angle table approx. 250 x 700 mm, mounted • Original DECKEL universal dividing head with tailstock and faceplates • Original DECKEL high-speed vertical milling head with separate drive • Large original DECKEL tool cabinet for storing the above accessories and various arbors, approx. 30 assorted collets, various milling tools, several arbors, etc., as well as operating tools, separate control cabinet, coolant system Condition : very good – demonstration-ready, ideal for training workshops/education Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice Hedpfxoxzk Ire Abhsh Constantly available: further DECKEL FP 1 / FP 2 / FP 4 milling machines and, of course, additional accessories such as spiral milling attachments also in stock

Stanje: pripravljen za uporabo (rabljen), Deckel Maho 27073757 / a touch panel for Deckel Maho CNC 432 control unit, serial number as shown in the photo, used, normal signs of wear, 100% fully functional, scope of delivery as per photos Hodpfx Asi D Upcobhjh

Stanje: pripravljen za uporabo (rabljen), Deckel Maho 5100027000 touch panel for Deckel Maho CNC 432 control, serial no. as per photo, used, normal signs of wear, 100% fully functional, scope of delivery as shown in photos. Hsdpfx Aoi D Upgebhoh

Stanje: rabljeno, Rabljeni orodni rezkalni stroj za obdelavo kovin znamke Deckel, model FP3a. Naprava je rabljena, vendar še vedno popolnoma funkcionalna in pripravljena na delo. Ima robustno konstrukcijo in številne funkcije, ki omogočajo natančno obdelavo kovin. Hjdpfxsxluu Rj Abhjh Cena brez DDV, DDV znaša 23 % Glavni motor vretena: 2/4 kW Hitrost vretena: 25–2500 Vreteno: SK 40 Izvlek pinole: 100 mm Motor pomikov: 1,5 kW Hitrost pomika: 5–500 mm/min Korekcija pomika: 0–120 % Hitri pomiki: 1500 mm/min Mehanski/ročni pomik: X 490/500 mm Y 290/300 mm Z 390/400 mm Glava se lahko premakne za 200 mm Teža stroja: 1750 kg Največja teža obdelovanca: 500 kg

Stanje: dober (rabljeno), Interna številka artikla: 25094 Univerzalni rezkalni stroj Deckel FP1 + Oprema (strojni primež / delilna glava / SK40 držala / nasprotni nosilec) V rezkalni glavi je vgrajena vpenjalna puša M16 + Dodatno vpenjalna puša S20x2 Stroj je možno pregledati ob priklopu na elektriko. Hsdjxxkwnepfx Abhoh

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1972, Orodjarska rezkalna stroja Deckel FP1, nagibna kotna miza, vretenski priklop MK 4. Pribor: nasprotni nosilec, različne vpenjalne puše. Stroj je v obratovalnem stanju. Po dogovoru je možen prikaz pod napetostjo. Hsdpfx Abex Nclnjhoh

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, poteza s peresom: 90 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, Oprema: dokumentacija / priročnik, Dear Sir or Madam, Hedpfx Abex Irwdjhsh We are pleased to offer you a partially overhauled milling machine of the type Deckel FP4M (K) aktiv. Thanks to its extensive features, this model stands out as a true highlight among conventional machine tools. The Deckel FP4MK has been thoroughly and partially refurbished in our workshop, bringing it to an absolutely top condition, making it technically, visually, and geometrically almost indistinguishable from a new machine. We look forward to receiving your inquiry! Delivery time: on request Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Axis travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Table design: rigid angular table or rotary/swivel/tilt table Additional features and accessories include: Heidenhain 3-axis digital readout with active control, hydraulic tool clamping, coolant system, leveling feet, technical documentation, and much more on request… Our service promise to you: - We are a certified master company specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - You can freely choose the color of your selected machine - If desired, you can order additional accessories, such as tools, directly - On request, we can install additional accessories, such as safety devices - We are happy to handle shipping and/or installation for you

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper and S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by prior arrangement. Hsdpfx Abowg S Nkshoh

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK 40 spindle taper. Good operational condition, can be demonstrated under power by prior arrangement. Hodjwg S I Topfx Abhjh

Stanje: dober (rabljeno), Leto izdelave: 1998, Machine is dirty. Hodpfxsvptmko Abhoh Technical condition is good. Rotary and swivel table is installed.

Stanje: pripravljen za uporabo (rabljen), Travel distances: 300 x 150 x 340 mm Universal table: 600 x 260 mm Spindle mount: ISO 40 Hsdpfxsdr E Ape Abhjh Spindle speeds: 40–2000 rpm Digital readout Various accessories MARCELS MASCHINEN CH

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 220 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 25 obr/min, Dear Sir or Madam, We are offering for sale a Deckel FP2. This newer model stands out especially for its infinitely variable spindle speed control, while still featuring a very straightforward design. Operation is extremely simple as well. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition, which you are welcome to verify on site. --- Currently, we have 3 units available --- Delivery time: on request Machine no.: 2202-xxxx Table: fixed angle table or rotary/swivel/tilting table Hedpfsx Hr Dzjx Abhjh Travel (X/Y/Z): 400mm / 220mm / 400mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2500 rpm Tool mounting: SK40 Drawbar system: S20x2 Feed: stepless Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed control on all 3 axes, coolant system, central lubrication, technical documentation, leveling feet, safety features (optional) Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced prior to sale - On request, we can fully or partially overhaul your selected machine - On request, you can order additional accessories such as tools, etc. directly - On request, we can fit additional equipment such as safety features directly - We are also happy to take care of shipping and/or installation

Leto izdelave: 1990, Stanje: rabljeno, Grundig control panel for DECKEL FP 5 A DIALOG 11, including handwheel/control element, year of manufacture 1990. Hjdpfxok Rqcno Abhjh

Stanje: rabljeno, Leto izdelave: 1992, številka stroja/vozila: 2821-1444, Condition as shown in the pictures. Further detailed information about the machine will follow shortly. Hjdpfx Ajtgkd Robhjh

Stanje: dober (rabljeno), Leto izdelave: 1964, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 200 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 200 obr/min, hitrost vretena (min.): 40 obr/min, vhodna frekvenca: 50 Hz, The machine is in good condition! Tool holder: SK 40 Travel X/Y/Z: 500 / 200 / 400 mm Speed range: (18 steps) 40 - 2000 rpm Vertical spindle stroke: 60 mm Horizontal spindle stroke: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 300 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Hsdpfeilg H Eex Abhsh Weight: approx. 1300 kg Space requirements LxWxH, approx.: 1200 x 1250 x 1670 mm Head swiveling: 90° / 90° Equipment: - 3-axis digital display - Coolant system We would be happy to demonstrate the machine to you under power at our premises. All information is provided without guarantee. Subject to prior sale. The item is sold excluding any warranty. This exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of duty by the seller, or for injury to life, limb, or health.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 1990, Nadomestni deli za CNC rezkalni stroj, proizvajalec DECKEL FP5CC/T, letnik 1990. Nadomestni deli kot so: krmilje DIALOG 11, celotna elektro omara, vertikalno in horizontalno rezkalno vreteno ISO 40, univerzalna nagibna okrogla miza, magazin za orodja z menjalcem, transporter za ostružke, motorji itd. Povprašajte po potrebnih delih. Hjdpfxefgvu Us Abheh

Leto izdelave: 1990, Stanje: dober (rabljeno), Various collets and holders, approx. 300 pieces. For DECKEL milling machines FP1, FP2, FP3, FP4. Hodpfehvz Iiex Abhoh Individual sale upon request.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Hedpfx Aepy Eldobhjh Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with 3-Axis Digital Readout AXESTA, including 2 accessory cabinets, from university environment, in excellent condition Technical Data: >> Machine No. 0494 >> 3-axis digital readout AXESTA >> Swiveling, tilting and rotating table >> Spindle speeds: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel path X/Y/Z: 500/300/400 mm >> Equipment: vertical and horizontal spindle >> Extensible vertical and horizontal quill – SK-40 >> Drawbar system S20x2 >> Weight: approx. 1,300 kg Accessories and Equipment: >> 3-axis digital readout AXESTA >> Coolant system >> Centralized lubrication 2 accessory cabinets including: - Collets - Horizontal and vertical tool holders - Clamping tool - Dividing head with 3-jaw chuck - Machine vice - Counter-support - Faceplate Hedpfx Aboxxzl Nehsh - Additional small rotary/tilting/turning table - Rotary table - Counter-support - Machine vice and much more About the machine: Offered for sale is a Deckel FP3 universal milling machine in excellent condition. All spindles move easily. The machine comes with 2 tool cabinets including a comprehensive set of accessories. Previously located at a university. Oil change performed. Mechanically and electrically tested. The digital readout allows for easier and more precise work. Take the opportunity to inspect and test-run the Deckel on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-Axis Heidenhain TNC 113 Digital Readout and Infinitely Variable Feed, EXCELLENT CONDITION Technical Data: >> Year of manufacture: 1990 Machine No. 2102-5046 >> Fixed angular table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes Hodpfx Aeu Um Erebhoh >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle support >> Vertical and horizontal quill - SK40 taper >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Centralized electric lubrication >> Coolant system >> Operating manual, spare parts list Additional information about the machine: Offered is a Deckel FP1 universal milling machine, year 1990, in very good condition. The machine has very little backlash on the handwheels and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed for all three axes is infinitely variable, and the machine is also equipped with rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain controller, you can enter dimensions which the machine will move to automatically. The FP1 was previously used in a training shop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test this excellent machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis K&C Digital Readout (new) and stepless feed on 3 axes – Excellent Condition Technical Data: >> Year of manufacture: 1983 Machine No.: 2102-2444 >> Fixed angle table >> Spindle speed: 40 – 2000 rpm >> Stepless feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW Hjdpetwlwzofx Abheh >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout (K+C) newly installed, manufacturer’s warranty and manual included. Display features: set reference points, zero points, enter coordinates, mm/inch conversion, absolute/incremental coordinates, circle functions, hole array, radius milling functions, etc. >> Coolant system >> Operating manual, spare parts list About the Machine: Offered is a universal milling machine Deckel FP1, built in 1983, in excellent condition. The machine has very little backlash, and all leadscrews move smoothly. Even at maximum speed, the milling machine runs quietly. On this newer FP1 model, the feed is continuously variable on all three axes, plus rapid traverse is available in all axes. The FP1 was located in a training workshop and used only occasionally. The oil has been changed. Mechanically and electrically tested. The new K&C digital readout makes operation easier and even more precise. Take the opportunity to view and test this gem on site under power.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 in Special Light Grey Paint with New 3-Axis K+C Digital Display Technical Data: Hedpfx Aeu I Rm Nebheh • Mach. No. 5983, Year of manufacture approx. 1975 • Rigid angle table (newly refurbished) • Speed range: 40 - 2000 rpm • Feed and rapid traverse on 3 axes • Drive power: 2.2 kW • Travel X/Y/Z: 400/200/400 mm • Equipment: Vertical & horizontal spindle • Extendable vertical and horizontal quill - SK-40 taper • Drawbar system: S20x2 • Weight approx. 1,100 kg Accessories and Features: • 3-axis K+C digital readout, newly installed with manufacturer's warranty Display features: set reference points, set zero points, input coordinates, switch mm/inch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. • User manual for digital readout • Coolant system About the machine: For sale is a Deckel FP2 universal milling machine in good condition. The Deckel has very little backlash and all spindles move smoothly. The machine has been completely dismantled and newly painted. An oil change has been carried out. Mechanically and electrically tested. The K+C digital readout makes work easier and even more precise. Additionally, you receive a 1-year warranty on the new digital readout. Take the opportunity to view and test the Deckel on site under power. The machine is available immediately.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Heidenhain Digital Readout, Original Condition!!! Technical Data: >> Machine No. 56560/08, year of manufacture approx. 1975 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical quill SK40 and horizontal quill SK40 >> Drawbar system: S20x2 >> Weight approx. 700 kg Ecvf9Jfv9 Accessories and Equipment: >> 3-axis Heidenhain digital readout >> Coolant system About the machine: Hsdpfx Aeu Nvxmobhjh Offered here is a universal milling machine Deckel FP1 in very good original condition. The Deckel has minimal backlash in the handwheels and all spindles move smoothly. An oil change has been carried out. Mechanically and electrically checked. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the Deckel under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP1 with 3-axis Digital Readout K&C, infinitely variable feed, painted in light grey, excellent condition Technical Data: >> Year of manufacture: 1978 Machine No. 2101-0465 >> Fixed angle table >> Spindle speeds: 40 - 2000 rpm >> Infinitely variable feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel (X/Y/Z): 300/160/340 mm >> Vertical milling head adjustable 100 mm on column >> Vertical quill and horizontal quill - SK40 >> Drawbar system S20x2 Hodpet Aav Iefx Abhsh >> Weight approx. 700 kg Equipment and Accessories: >> 3-axis digital readout K&C newly installed with manufacturer's warranty and operating manual. Display unit: Reference points, zero setting, coordinate input, mm/inch switch, absolute or incremental coordinates, circle functions, hole patterns, radius milling functions, etc. >> Coolant system About the Machine: For sale is a universal milling machine Deckel FP1 in very good condition. The machine has very little backlash and all spindles move smoothly. All bellows have been replaced. On this newer FP1 model, feed is infinitely variable on two axes; the machine is also equipped with a rapid traverse. An oil change has been performed. Mechanically and electrically inspected. The new K&C digital readout makes working easier and even more precise. Take the opportunity to inspect and test the machine under power on site.