Rezkalni stroj

DECKEL FP 1

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 700 kg, skupna dolžina: 1.000 mm, skupna širina: 900 mm, skupna višina: 1.600 mm, največja hitrost vretena: 1.900 obr/min, številka stroja/vozila: 50025, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Stroj se draži zaradi prenehanja obratovanja. Oddaja ponudbe obvezuje k pravočasnemu prevzemu med 26.01.2026 in 29.01.2026! TEHNIČNI PODATKI Gsdsxqmpdjpfx Afqjbg Hitrost vretena: 19 – 1.900 obr./min PODROBNOSTI O STROJU Dimenzije & Teža Dimenzije (D x Š x V): 1.000 x 900 x 1.600 mm Teža: 700 kg

Leto izdelave: 2003, Stanje: pripravljen za uporabo (rabljen), Seven Arburg injection moulding machines are available. 1) Arburg 320C 600-250, year of manufacture: 2001, operating hours: 83,365h, clamping force: 600kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 4,000mm/2,300mm. Including Multilift handling unit. 2) Arburg 420C 1000-250, year of manufacture: 2001, operating hours: 90,769h, clamping force: 1,000kN, screw diameter: 30mm, shot weight: 97g, max. injection pressure: 2,470 bar, shot volume: 106cm³, centring: 125mm/125mm, max. opening stroke: 750mm, platen spacing: 750mm, platen dimensions (X/Y): 570mm/570mm, tie bar spacing: 420mm/420mm, core pulls: 2, machine dimensions (X/Y): approx. 4,700mm/2,350mm. Including Multilift handling unit. 3) Arburg 270C 300-100, year of manufacture: 1999, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 1, temperature control units: 6. Including Geiger handling unit. 4) Arburg 320C 300-100, year of manufacture: 2000, operating hours: 78,784h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 125mm/110mm, max. opening stroke: 350mm, platen spacing: 350mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 320mm/320mm, core pulls: 1, temperature control units: 6. Gbodpjtyyn Hofx Afqjg 5) Arburg 220C 250-60, year of manufacture: 2001, operating hours: 86,595h, clamping force: 250kN, screw diameter: 22mm, shot weight: 27g, max. injection pressure: 2,340 bar, shot volume: 30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6. 6) Arburg 270C 300-100, year of manufacture: 2007, operating hours: 59,885h, clamping force: 300kN, screw diameter: 20mm, shot weight: 28g, max. injection pressure: 2,500 bar, shot volume: 31cm³, centring: 110mm/110mm, max. opening stroke: 550mm, platen spacing: 550mm, platen dimensions (X/Y): 446mm/446mm, tie bar spacing: 270mm/270mm, core pulls: 2, temperature control units: 6, machine dimensions (X/Y): approx. 3,750mm/2,400mm. Including Multilift handling unit. 7) Arburg 220S 250-60, year of manufacture: 2001, operating hours: 57,504h, clamping force: 250kN, screw diameter: 18mm/22mm, shot weight: 18g/27g, max. injection pressure: 2,500 bar/2,340 bar, shot volume: 20cm³/30cm³, centring: 110mm/110mm, max. opening stroke: 425mm, platen spacing: 425mm, platen dimensions (X/Y): 400mm/400mm, tie bar spacing: 221mm/221mm, core pulls: 1, temperature control units: 6, machine dimensions (X/Y): approx. 3,300mm/1,100mm. Documentation available. On-site inspection possible.

Stanje: generalkompletno obnovljen (rabljeno), Deckel FP1 Activ CNC Milling Machine – Completely Refurbished For decades, the Deckel FP1 Activ has set the standard for highest precision, durability, and universal versatility in toolmaking, training, and manufacturing applications. The machine offered here has been completely refurbished, both technically and visually, and is presented in a condition very close to new, offering a cost-effective alternative to purchasing a new machine. Condition: Refurbished The machine has undergone a comprehensive overhaul, including a complete technical inspection. All relevant components have been checked, repaired or replaced as necessary. The objective is to deliver a highly reliable machine with outstanding accuracy and reproducible performance over the long term. Scope of Refurbishment: • Full technical inspection of all functions • Repair or replacement of defective components • Complete cleaning of the entire machine • Readjustment of all available settings • Replacement of all lubricants • Replacement of various standard parts • Replacement of worn components • Repainting in custom color upon request • Refurbishment of guideways Delivery Time: Approximately 12 weeks from order confirmation Your Advantages at a Glance: • High precision and stability • Proven Deckel quality • Significantly more economical than a new machine • Ideal for single-part manufacturing, training, and workshop use • Future-proof investment with long service life • Alternative options available Gsdpfx Asx Tdy Iofqjbg Upon request, we can also offer a partially refurbished or workshop-tested alternative. Delivery time for these options is shorter and provided on request. For detailed information about the specific scope of refurbishment, please refer to the accompanying table or contact us directly. We are happy to provide personalized advice regarding equipment, control options, and suitable accessories. We will find the right solution for your requirements.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje Gbodjx S Edljpfx Afqog - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Stanje: rabljeno, PTP VPU 1 Conventionele Freesmachine Tafel afmetingen: 260x1000mm Conus: 40mm X as: 500mm Y as: 300mm Z as: 400mm Afmetingen: 170x130x145mm Variabele toeren Verticaal en horizontaal te gebruiken Voeding Kop in graden verstelbaar Met koelpomp Locatie: Hamont-Achel, België Bel of mail voor meer informatie Bekijk ook onze andere advertenties Tevens zijn wij het hele jaar door opzoek naar industriële machines. Heeft u overbodige machines, mail ze ons met foto's en informatie. PTP VPU 1 Conventional Milling Machine Table dimensions: 260x1000mm Cone: 40mm Gjdpfx Aforzbktsqobg X axis: 500mm Y axis: 300mm Z axis: 400mm Dimensions: 170x130x145mm Variable speeds Can be used vertically and horizontally Power supply Head adjustable in degrees With cooling pump Location: Hamont-Achel, Belgium Call or email for more information Also view our other advertisements We are also looking for industrial machines all year round. If you have redundant machines, email them to us with photos and information. PTP VPU 1 Conventional Milling Machine Dimensiones de la mesa: 260x1000mm Cono: 40mm Eje X: 500mm Eje Y: 300mm Eje Z: 400mm Dimensiones: 170x130x145mm Velocidades variables Adecuada para trabajo vertical y horizontal Alimentación eléctrica Cabezal orientable en grados Con bomba de refrigeración Ubicación: Hamont-Achel, Bélgica Llame o envíe un correo electrónico para más información Consulte también nuestros otros anuncios Estamos buscando máquinas industriales durante todo el año. Si tiene máquinas excedentes, envíenos un correo electrónico con fotos e información. PTP VPU 1 Machine à fraiser conventionnelle Dimensions de la table : 260x1000mm Cône : 40mm Axe X : 500mm Axe Y : 300mm Axe Z : 400mm Dimensions : 170x130x145mm Vitesses variables Utilisable à la verticale et à l’horizontale Alimentation électrique Tête orientable en degrés Avec pompe de refroidissement Emplacement : Hamont-Achel, Belgique Appelez ou envoyez un email pour plus d’informations Consultez également nos autres annonces Nous recherchons également des machines industrielles toute l’année. Si vous disposez de machines excédentaires, envoyez-nous un email avec photos et informations.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Tehnične podrobnosti x-hod 300 mm y-hod 160 mm z-hod 290 mm Površina mize 210 x 600 mm Vpenjanje orodij SK 40 Vretene vrtljaji (16) 40 - 2000 vrt./min Pomiki brezstopenjsko 5 - 500 mm/min Hitropomik 1,2 m/min Pogonski motor vretena 1,5 / 1,9 kW Skupna potrebna moč 9,5 kVA Teža stroja pribl. 730 kg Potrebni prostor pribl. 2000 x 2200 x 1655 mm Dodatne informacije Stroj je v zelo dobrem stanju in prihaja iz Gedex S Ec Uepfx Afqjbg učilnice. Oprema: Zaščitni pokrov in LED svetilka dograjeni leta 2016 3-osni aktivni digitalni prikaz Heidenhain Fiksna kotna miza Sistem za hlajenje

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 2-axis active digital display (Heidenhain) Spindle mounting: SK40 (S20x2) Gbjdpfx Afjvnr Hyjqjg Travel distances: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2 gearbox stages) Feed infinitely variable adjustable The machine is in well-maintained condition and can be inspected under power on site. Includes extensive accessories: - Machine vise - Operating manual / electrical circuit diagram / spare parts list - Collet set (S20x2) incl. SK40 collet chuck - Additional accessories available on request.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Gjdepy Eldepfx Afqobg Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: dober (rabljeno), Three-phase motor, electric motor, brake motor - Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from a Deckel FP4L milling machine - Power output: 4.0 kW - Speed: 1435 rpm - Mounting type: B14 - Protection rating: IP 44 Gbedpfx Ajul H Dwofqeg - Brake: Disc brake type EK5dB24 - Dimensions: 575/270/H225 mm - Weight: 64 kg

Stanje: dober (rabljeno), 1 used universal tool milling machine Make: Deckel Model: FP 1 Year of manufacture: 1982 Technical specifications: X-axis travel: 300 mm Gbjdpfxjrn I Rzo Afqsg Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle taper: SK 40 Table size: 600 x 210 mm Spindle speeds: 40–2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6 x 1.3 x 1.8 m

Leto izdelave: 1990, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 647-230, Hamba Punching Machine for Lids (Deckelstanzmaschine) without Tooling Model 647-230 Film width: 230 mm Very good condition Gbodpfx Aenr Ex Tjfqog Made in Germany - Supplied with used embossing calender for worm-structure texture - Power supply: 220/380V – three-phase - Additional punching tools available, e.g.: 2x double-punch tool – diameter 75.50 mm 1x double-punch tool – diameter 59.54 mm 1x double-punch tool – diameter 80.50 mm 1x double-punch tool – diameter 93.80 x 120.90 mm

Stanje: dober (rabljeno), DECKEL Toolroom Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment milling head arm: 100 mm Enlarged working area up to: 300 x 260 mm Spindle speeds vertical/horizontal: 40 – 2,000 rpm Gear ranges: 16 Gbedsxyc Tkopfx Afqeg Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill stroke: 60 mm Feed X/Z axis: 5 – 500 mm/min Feed control: stepless Rapid traverse X/Z axis: 1,200 mm/min Feed Y-axis: manual Fixed angle table: 600 x 210 mm Swiveling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data not binding! Features: - For horizontal machining, the milling head is swiveled 90 degrees and retracted. - 3-axis precision digital readout by HEIDENHAIN - Stepless feed in X/Z axis - The machine was partially overhauled by a specialist company a few years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro-coolant spray device - Fixed angle table - Chip tray - Machine lamp - Machine feet Additional accessories available on request! Condition: Good to very good, from training facility Available from: March 2026

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 3-axis active digital display (Heidenhain TNC113) Spindle taper: SK40 (S20x2) Travel: X 300 / Y 160 / Z 340 mm Gjdpfevnrz Rsx Afqsbg Spindle speed: 40 - 2000 rpm (2-speed gearbox) Feed rate steplessly adjustable The machine is in well-maintained condition and can be inspected under power on site. Including extensive accessories: - Machine vice - Operating manual / electrical schematic / spare parts list - Collet chuck set (S20x2) including SK40 collet chuck adapter - Additional accessories available upon request.

Stanje: dober (rabljeno), Leto izdelave: 2000, Manufacturer: KUKA Model: KR 350/2 Year of manufacture: 2000 Net weight: 1,870 kg Without cables and control cabinet. Gjdpfx Aoh Dwr Usfqsbg Supplement to the measurement report!

Stanje: zelo dobro (rabljeno), DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Enlarged working area: 300 x 260 mm Spindle speed: Vertical/Horizontal: 40 – 2,000 rpm Gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z axes: 5 – 500 mm/min Feed control: stepless Rapid traverse: X/Z axes: 1,200 mm/min Gjdjxyc N Eopfx Afqsbg Feed Y-axis: manual Fixed angle table: 600 x 210 mm Swiveling vertical head: ±90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data not binding! Features: • For horizontal machining, the milling head is swiveled by 90 degrees and pushed back. • 2-axis HEIDENHAIN POSITIP VRZ 719 precision digital readout • Stepless feed in X/Z axes • The machine underwent partial overhaul by a specialized company a few years ago. Equipment: • 2-axis digital readout HEIDENHAIN • Fixed angle table • Chip tray • Machine lamp • Machine feet Additional accessories available on request! Condition: Good to very good from training facility Available from March 2026