Rezkalni stroj

DECKEL FP 1 Aktiv

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) Itjdpfx Aox S Edlsf Teb - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Stanje: novo, Leto izdelave: 2025, Showroom model available immediately: New Kaeser SK 25 T - 10 bar screw compressor with integrated refrigeration dryer Pressure: 10 bar Ijdpodrc Txefx Af Tetb Rated power: 15 kW Free air delivery: 2.11 m³/min Sound level: 67 dB(A) Compressed air outlet: 1" Dimensions (L x W x H): 750 x 1240 x 1260 mm Weight: 395 kg Operating hours: 0 h Convenient leasing options for new machines available through our in-house bank. Visit our store. We always have a large selection of new and used compressors in stock!

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 2-axis active digital display (Heidenhain) Spindle mounting: SK40 (S20x2) Travel distances: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2 gearbox stages) Feed infinitely variable adjustable The machine is in well-maintained condition and can be inspected under power on site. Includes extensive accessories: - Machine vise - Operating manual / electrical circuit diagram / spare parts list Itsdpovnr Hysfx Af Tob - Collet set (S20x2) incl. SK40 collet chuck - Additional accessories available on request.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, 3-axis active digital display (Heidenhain TNC113) Spindle taper: SK40 (S20x2) Travel: X 300 / Y 160 / Z 340 mm Spindle speed: 40 - 2000 rpm (2-speed gearbox) Feed rate steplessly adjustable The machine is in well-maintained condition and can be inspected under power on site. Including extensive accessories: - Machine vice - Operating manual / electrical schematic / spare parts list Itedpfx Afsvnrz Ro Tjb - Collet chuck set (S20x2) including SK40 collet chuck adapter - Additional accessories available upon request.

Stanje: dober (rabljeno), Dimensions: Width 2000 mm, Depth 2000 mm, Height 1600 mm Table: 620 mm x 390 mm Machine weight: approx. 1500 kg Control: Dialog 4 Equipment: backlash-free ball screw drives, hydraulically actuated SK40 tool holder, electronic handwheel Itjdpfxju A Iuyo Af Tsb

Stanje: delavnici obnovljeno (rabljeno), Deckel FP1 AKTIV (3-axis Aktiv) Machine no. 2102-5745 Year of manufacture: approx. 1988 Travels: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Features: - Aktiv digital readout for 3 axes (HEIDENHAIN TNC 113) - Infinitely variable feed in X, Y, and Z axes - Quill traverse at vertical milling head: 60 mm - Vertical milling head is swiveling and extendable horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Central lubrication Space requirement (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg Itsdoxpwfgopfx Af Tob The machine has been visually refurbished and technically tested. Upon request, videos of the geometry can be provided. Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Deviation parallelism Y-axis: 0.002 mm (measuring length 150 mm) Deviation parallelism X-axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Central lubrication system checked - Heidenhain digital display overhauled - Set of scrapers installed - LEDs in Aktiv display replaced - Oil change - Vertical milling head re-bedded - Oil sight glass replaced Net price ex works, loaded from stock

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dear Sir or Madam, We are pleased to offer a Deckel FP1 3-axis universal milling machine with retrofitted safety devices. This newer model features, among other things, central lubrication, an electric coolant pump, and a brake motor. Thanks to the Harting connector, the control cabinet can be quickly disconnected from the machine. The safety components are also connected to the control cabinet using this connector type, ensuring ease of handling is fully maintained. All retrofitted safety devices, which we offer for every machine type, are covered by a 12-month warranty! *The electronic spindle guard is adjustable in multiple axes and is designed to prevent access to the working spindle and protect against flying chips, coolant, etc.* Isdpfjx Rvlqjx Af Tstb *The electronic spindle safety cover prevents intervention in the rotating spindle stub and tool clamping.* Delivery time: on request Year of manufacture: 1989-1992 Machine no.: 2102-xxxx Table: fixed angle table Travel distances: X300mm / Y160mm / Z340mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1200 mm/min Features and accessories include: 3-axis digital readout with Heidenhain active control, coolant system, central lubrication, machine feet, technical documentation, electronic spindle guard, electronic spindle safety cover Our service promise to you: - We are a certified master company in mechanical engineering - All machines are thoroughly inspected - All lubricants and worn parts are replaced as a precaution - Upon request, we will fully or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools, etc. - Upon request, we can install further accessories such as safety devices - We are happy to handle shipping and/or installation for you

Stanje: novo, Optimum OPTImill MZ 2S Tool Milling Machine Featuring a digital 3-axis position display DP 700 from NEWALL. The feed axes are controlled by an inverter drive via the control panel. Versatile range of applications Excellent damping properties and rigidity of the machine bed All guides are hardened and precision ground, adjustable via gib strips Automatic feed on X, Y and Z axes, continuously adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screws on all axes Central, clearly arranged control panel with integrated digital position and speed display Heavy-duty, large-scale cross table with high-precision machined surface and 5 T-slots Coolant system Oversized handwheels with scale Machine lamp Smooth running Manual central lubrication TECHNICAL DATA Dimensions and Weights Length (product) approx. 1239mm Width/Depth (product) approx. 1168mm Height (product) approx. 1900mm Net weight approx. 1400kg Drill-Milling Head Milling head swiveling range ±90° Drilling-Milling Performance Max. cutter head size 100mm Drilling capacity in steel (S235JR) 30mm Continuous drilling capacity in steel (S235JR) 26mm Max. end mill size 25mm Electrical Data Drive motor power 2.2kW Connection voltage 400V Mains frequency 50Hz Horizontal Milling Table Horizontal table length 750mm Horizontal table width 320mm Distance vertical spindle to horizontal table min. 75mm Distance vertical spindle to horizontal table max. 410mm Horizontal table T-slot size 14mm Horizontal table T-slot number 5 Horizontal table T-slot spacing 63mm Distance horizontal spindle to horizontal table min. 70mm Distance horizontal spindle to horizontal table max. 400mm Maximum horizontal table load 285kg Vertical Milling Table Vertical table length 830mm Vertical table width 250mm Vertical table T-slot size 14mm Vertical table T-slot number 2 Vertical table T-slot spacing 63mm Coolant System Coolant pump drive power 95W Travel Paths Manual X-axis travel 400mm Manual Y-axis travel 200mm Manual Z-axis travel 335mm Automatic X-axis travel approx. 310mm Automatic Y-axis travel approx. 160mm Itsdpfefnh Sgsx Af Tjb Automatic Z-axis travel 295mm Vertical Spindle Vertical spindle overhang 100mm Vertical spindle taper ISO 40 DIN 2080 Vertical spindle speed range 50 – 1890 rpm Vertical spindle number of speed ranges 12 steps Vertical spindle drawbar M16 Vertical spindle quill travel 120mm Vertical spindle max. load 1100Nm Feed Rate Feed rate X-axis 10 – 600mm/min Feed rate Y-axis 10 – 600mm/min Feed rate Z-axis 10 – 600mm/min Electrical Connection Total connected load 4kW Motors Rapid traverse X-axis drive motor power 0.375kW Rapid traverse Y-axis drive motor power 0.375kW Rapid traverse Z-axis drive motor power 0.375kW SCOPE OF DELIVERY: Adapter ISO 40/MK3 MT1 and MT2 sleeves Horizontal milling spindle Ø 27 mm Operating tools

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 360 mm, For sale is a Deckel FP1 milling machine with 3-axis active control. The machine is fully operational and is inspected, cleaned, and stored in our incoming goods area. Technical data: Isdpfx Asr H E Uijf Totb • Digital display • 3-axis active digital readout by HEIDENHAIN • Travel (X axis): 300 mm • Travel (Y axis): 160 mm • Travel (Z axis): 340 mm • Tool holder: SK 40 • Milling head type: Vertical milling head • Speed range: 40 – 2000 rpm • Number of speed steps: 16 • X-axis feed: 290 mm • Y-axis feed: 150 mm • Z-axis feed: 330 mm • Weight: 650 kg • Dimensions: 1200 x 1100 x 1800 mm Accessories: - Active function on X, Y, and Z axes - Coolant system The offer refers to the machine without tooling; tooling may be negotiated separately. On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT. Viewing possible by appointment. Contact us—our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Stanje: dober (rabljeno), Leto izdelave: 1989, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 M16 spindle taper. Good, operational condition. Can be demonstrated under power by arrangement. Itodpfjtp Nyfex Af Teb

Leto izdelave: 2021, Stanje: novo, Engraving Tool Grinder Make: HERZOG (AMA) Model: Pregraph U2 Itedpfxjgllp Us Af Tsb Condition: New machine with warranty - for grinding engraving tools, pins, punches, and round parts - robust, durable construction - versatile applications - motor protection and restart protection Accessories: - Dressing tool: by axially advancing the grinding wheel, the previous adjustment is maintained - Machine lamp - Operating tools - Grinding wheel with flange - Operating manual

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1990, Univerzalni rezkalni stroj Znamka: DECKEL Model: FP 1 Aktiv Letnik: 1990 - preizkušen v delavnici Serijska številka: 2102-5866 Tip rezkalne glave: 2171 Številka rezkalne glave: 4613 Itjdpfxex It Rxj Af Tob Geometrijski prevzem s preizkusnim protokolom Pribor: - 3-osni aktivni digitalni prikazovalnik HEIDENHAIN TNC 113 z aktivno funkcijo v X-, Y- in Z-osi - Univerzalna miza 590 x 250 mm (T-utori: 12 mm) - Vertikalna rezkalna glava SK 40 z vijačnim navojem S 20 x 2 - Brez hladilne naprave možnost naknadne vgradnje - Električna centralna mazalna naprava - Navodila za uporabo Rabljeno kot vidno, brez garancije Stroj ustreza tehničnemu stanju časa izdelave.

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP1 Aktiv milling machine with 3-axis Heidenhain digital readout, tilting table. SK 40 spindle taper. Good operational condition, can be demonstrated under power by prior arrangement. Itjdpowg S I Tjfx Af Teb

Stanje: dober (rabljeno), Leto izdelave: 1999, številka stroja/vozila: 20403, Angbot 25170 Technical Data: - Drilling capacity in steel ST 60: 40 mm - Maximum drilling diameter in steel ST 60: 50 mm - Spindle taper: MT 4 - Spindle stroke: 180 mm - Infinitely variable spindle speeds with intermediate gearbox: - Range 1: 60 – 210 rpm - Range 2: 210 – 765 rpm - Range 3: 120 – 420 rpm - Range 4: 420 – 1530 rpm - Throat depth: 330 mm - 3 automatic feed rates: 0.1 / 0.2 / 0.3 mm/rev - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance table to spindle: approx. 780 mm - Max. distance base plate (machined) to spindle: 1250 mm - Coolant system - Work light - Machine vice - Assorted 10 pcs. HSS drills - Power supply: 400 V / 2.6 / 4 kW - Space requirement: approx. W 720 x H 2050 x D 1150 mm - Weight: approx. 350 kg Itedpfx Afjwncaij Tjb

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Itodpfjpy Eldex Af Tob Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you