Deckel Fp 3 A nakup rabljenega (691)

Stanje: rabljeno, x-axis travel: 500 mm y-axis travel: 400 mm z-axis travel: 450 mm Spindle speed: 31.5 - 1600 rpm Tool holder: SK 40 Vertical quill stroke: 80 mm Quill diameter: 80 mm Table: 1000 x 850 mm Total power requirement: 4.0 kW Machine weight approx. 2.6 t Dimensions (L x W x H): 2.1 x 1.7 x 1.7 m Universal tool milling machine - Digital readout - Swivel table - Coolant system Kodpsvlakusfx Abbjwt - Machine mounts

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 1994, številka stroja/vozila: 2803-2194, Universal Milling Machine Deckel FP3 with Deckel Analog 4 Control Unit (defective) Technical Specifications: - Year of manufacture: 1994 - Table diameter: 500 mm Kwsdpfx Abju U I Iujbjt - Spindle speed: 40 - 2000 rpm - Drive power: 3 kW - Travel X/Y/Z - Weight: approx. 1500 kg Accessories and Equipment: - Deckel Analag4 display, Grundig Dialogsteuerung 4 (defective, exact fault unknown) About the Machine: Offered is a Deckel FP3 NC universal milling machine in good external condition. The spindles move smoothly. The rotary T-slot table is in good condition. Mechanically ready for operation; however, the control unit is defective. Exact fault is unfortunately unknown. Sale by customer order, without any warranty, offered as a source of spare parts.

Stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 300 mm, pomik osi Y: 160 mm, pomik po osi Z: 340 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, položaj glave za glodanje: SK40, vhodna napetost: 400 V, Deckel FP1 2-axis Active Travels: X = 300 mm Y = 160 mm Z = 340 mm Spindle speed 40-2000 rpm Automatic feed and rapid traverse on the X, Y and Z axes. Infinitely variable control. Table size 600 x 260 mm Kwsdpfx Abjvuzg Aebet 2-axis Aktiv control, point-to-point operation. 3-axis digital readout by Heidenhain. Spindle taper SK40 Deckel (external thread).

Stanje: rabljeno, Motor power 3 kW Total power requirement 3 kW Weight 1,400 kg O F F E R We can offer you from stock, subject to prior sale and errors: DECKEL Universal Tool Milling Machine with FAGOR 3-axis Digital Readout Type FP 3 Year Serial No. Table travel: longitudinal, motorized / manual 490 / 500 mm vertical, motorized / manual 370 / 380 mm Transverse milling slide travel, motorized / manual 290 / 300 mm Fixed angle table 2230 420 x 800 mm Installation height under spindle 90 - 470 mm Spindle taper SK 40 18 spindle speeds 40 – 2,000 rpm 18 feed rates 10 – 500 mm/min Rapid traverse 1,500 mm/min Spindle drive motor 3 kW Total drive 3 kW - 380 V - 50 Hz Weight 1,400 kg Accessories / Special features • FAGOR 3-axis digital readout V 300 (glass scales) with advanced functions such as chain dimensions, absolute dimension, mm/inch switching, etc. • Movable DECKEL universal vertical milling head, tiltable +/- 90° • Original DECKEL tool cabinet with extensive accessories such as various tool holders, collet chuck with approx. 20 collets, long arbor, various spacer rings, driving dogs, clamping devices, operating tools, etc. • DECKEL large, fixed angle table, 420 x 800 mm, mounted • DECKEL universal dividing head with direct and indirect indexing, various index plates • Additional manual DECKEL universal rotary table ? 380 mm with direct and indirect indexing, various index plates • Coolant equipment, chip tray, central lubrication, separate control cabinet, operating manuals Kwsdev Nq Skspfx Abbjt Condition: Very well-maintained condition! Ideal machine for training workshops or small batch production! Please click here for a video of the machine: FP3/4 Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice We always have a wide selection of conventional and CNC milling machines in stock. Please contact us!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel distances: X 300 Y 160 Z 340 mm Spindle speed range: 40 – 2000 rpm Including the following accessories: Rigid angle table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 pc. machine vice 1 pc. steady with counter bearing 1 pc. long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Ksdsw Agxrjpfx Abbswt Various tool holders S 22 x 2 Z-axis bellows 1 pc. chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 30000452, potovalna razdalja osi X: 300 mm, pomik osi Y: 150 mm, pomik po osi Z: 340 mm, hod vretena: 60 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 40 obr/min, dolžina mize: 600 mm, širina mize: 210 mm, skupna masa: 710 kg, obremenitev mize: 200 kg, Oprema: dokumentacija / priročnik, DECKEL FP1 – Fully Refurbished (2012) by FPS (Germany) with Heidenhain Digital Readout, Tool Cabinet with Tools, and Indexing Head. Since the overhaul, the machine has seen minimal use and is therefore in near-new condition. About FPS: Specialized in the complete overhaul of DECKEL machines. MANUFACTURER: DECKEL MODEL: FP1 CONDITION: Refurbished (2012) – mechanically & electronically as new! LOCATION: Graz (Austria) IMAGES/VIDEOS: For further pictures and videos of the operating unit, please send us your inquiry. Description: This high-quality DECKEL FP1 milling machine has been completely refurbished and brought up to the latest mechanical and electrical standards. A new CE-compliant control cabinet has been installed in accordance with the latest regulations (BGVA 3 / DIN-EN 60204-1 new machine standard). All control systems, drive packages, and drive motors were completely renewed during the overhaul and upgraded to state-of-the-art specifications. As part of the modernization, a new touch-proof control cabinet and motor were also installed. Technical Specifications: Operation: Manual, with automatic positioning capability Control: 3-axis Heidenhain digital readout Speed range: 40 – 2000 rpm (geometrically stepped, 16 speed levels) Feed rate: 10 – 500 mm/min (stepless adjustment) Rapid traverse: 1.2 m/min (stepless adjustment) Quill: 60 mm vertical & horizontal stroke, SK40 spindle taper Travel (X/Y/Z): 300 / 150 / 340 mm Table size: 600 × 210 mm Table load: max. 200 kg Machine weight: 710 kg (incl. angle table and milling head) Footprint: 1600 x 1400 x 1750 mm (W/D/H) Equipment: Vertical and horizontal spindle Manually swiveling milling head ± 90° Completely new electrical system & drive packages Refurbished – mechanically & electronically as new Kwedpfoxywhcjx Abbjt Extras: Z-axis bellows cover Special paint finish Highlights: Heidenhain digital readout for precise operation Control systems, drive package, and drive motors were fully renewed during overhaul Contact us to schedule a viewing appointment.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Tehnični podatki X-pot: 300 mm y-pot: 160 mm z-pot: 290 mm Površina mize: 600 x 210 mm Nosilec orodja: SK 40 Hitrosti vretena: (16) 40 - 2000 o/min Vodilni pomik brezstopenjski: 5 - 500 mm/min Hitri pomik: 1,2 m/min Kjdpfxeyangqs Abbewt Pogon vretena: 1,5 / 1,9 kW Skupna potrebna moč: 9,5 kVA Teža stroja pribl.: 830 kg Potreben prostor pribl.: 2000 x 2200 x 1655 mm Dodatne informacije Stroj je v zelo dobrem stanju in prihaja iz učne delavnice. Oprema: * 3-osni pozicijski krmilnik z aktivnim digitalnim prikazom Heidenhain TNC 123 - Ročno upravljanje: Ročni način in pozicioniranje z ročnim vnosom - Avtomatski način: Programirano izvajanje posameznih blokov, shranjevanje programov * Fiksna kotna miza * Premakljiv navpični rezkalni glavič, nagibni razpon +/- 90°, pomik pinole 60 mm * Naprava za hlajenje * Centralno mazanje * Protipodporna glava z ležajem * Nihajna stopala * Dokumentacija

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, A Deckel FP2 universal tool milling machine, completely overhauled in 2019, is available. Travel range X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, spindle speed: 2000 rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. An on-site inspection is possible. Kwedpfx Absvf Iy Debjt

Stanje: zelo dobro (rabljeno), DECKEL Universal Milling Machine FP 1 No. 2101 with HEIDENHAIN 2-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment of milling head arm: 100 mm Enlarged working area: 300 x 260 mm Spindle speed: Vertical/Horizontal: 40 – 2,000 rpm Gear steps: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill travel: 60 mm Feed X/Z axes: 5 – 500 mm/min Kedpfx Aoxyc N Eobbowt Feed control: stepless Rapid traverse: X/Z axes: 1,200 mm/min Feed Y-axis: manual Fixed angle table: 600 x 210 mm Swiveling vertical head: ±90 degrees Weight: 710 kg Dimensions: approx. 1,250 x 1,200 x 1,850 mm Technical data not binding! Features: • For horizontal machining, the milling head is swiveled by 90 degrees and pushed back. • 2-axis HEIDENHAIN POSITIP VRZ 719 precision digital readout • Stepless feed in X/Z axes • The machine underwent partial overhaul by a specialized company a few years ago. Equipment: • 2-axis digital readout HEIDENHAIN • Fixed angle table • Chip tray • Machine lamp • Machine feet Additional accessories available on request! Condition: Good to very good from training facility Available from March 2026

Stanje: dober (rabljeno), DECKEL Toolroom Milling Machine FP 1 No. 2101 with HEIDENHAIN 3-axis digital readout Travel distances: X/Y/Z: 300 x 160 x 340 mm Manual adjustment milling head arm: 100 mm Enlarged working area up to: 300 x 260 mm Spindle speeds vertical/horizontal: 40 – 2,000 rpm Gear ranges: 16 Spindle taper: SK 40 Tool clamping: S20 x 2 (Deckel standard) Quill stroke: 60 mm Kjdpjxyc Tkefx Abbewt Feed X/Z axis: 5 – 500 mm/min Feed control: stepless Rapid traverse X/Z axis: 1,200 mm/min Feed Y-axis: manual Fixed angle table: 600 x 210 mm Swiveling vertical head: +/- 90 degrees Weight: 710 kg Dimensions: approx. 1250 x 1200 x 1850 mm Technical data not binding! Features: - For horizontal machining, the milling head is swiveled 90 degrees and retracted. - 3-axis precision digital readout by HEIDENHAIN - Stepless feed in X/Z axis - The machine was partially overhauled by a specialist company a few years ago. Equipment: - 3-axis digital readout HEIDENHAIN - Micro-coolant spray device - Fixed angle table - Chip tray - Machine lamp - Machine feet Additional accessories available on request! Condition: Good to very good, from training facility Available from: March 2026

Stanje: dober (rabljeno), Leto izdelave: 1990, Deckel FP 4 MK Tool Milling Machine Deckel FP 4 MK with Heidenhain TNC 113 Control, Year of Manufacture 1990, Fully Overhauled in 2014, Excellent CONDITION, CE-Compliant!! The machine comes from Continental’s training workshop. Technical Data: Year of manufacture: 1990 Completely overhauled: 2014 Digital Display: 3-axis active digital readout HEIDENHAIN TNC 113 Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 400 mm Tool holder: SK 40 hydraulic tool clamping DIN 2080 Milling head type: Vertical milling head Spindle speed range: 50 – 2,500 rpm, 18 steps Kwjdpfx Absyalcpjbst Table type: Swivel table Clamping surface: 800 x 490 mm T-slot size: 14 mm Weight: approx. 1,450 kg Dimensions: approx. 2,500 x 2,700 x 2,100 mm Accessories and Features: Heidenhain TNC 113 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control, and programming examples Handwheels Coolant system About the Machine: Offered here is a Deckel FP 4 MK tool milling machine equipped with a Heidenhain TNC 113 control. This universal milling machine is in very good original condition. It originates from a facility where it was only occasionally used for training purposes. The control system is very user-friendly. Furthermore, the machine features hydraulic clamping both in the vertical and horizontal positions. Switching between vertical and horizontal operation is very simple thanks to the folding vertical head. The guides are regularly lubricated by the central lubrication system. The Deckel has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the Deckel under power on site. You can find additional milling machines from reputable manufacturers on our website.

Stanje: dober (rabljeno), 1 used universal tool milling machine Make: Deckel Model: FP 1 Kwjdpfx Aorn I Rzjbbjt Year of manufacture: 1982 Technical specifications: X-axis travel: 300 mm Y-axis travel: 160 mm Z-axis travel: 340 mm Spindle taper: SK 40 Table size: 600 x 210 mm Spindle speeds: 40–2000 rpm Machine weight approx.: 1 t Space requirement approx.: 1.6 x 1.3 x 1.8 m

Stanje: rabljeno, x-hod 400 mm y-hod 200 mm z-hod 400 mm Število vrtljajev vretena 18 Kwjdpfoxqrdtsx Abbet Vrtljaji 40 - 2000 min⁻¹ Pritrdilna površina mize 730 x 240 mm Vpenjalo SK 40 Razmak med utori 4 / 12 mm Število podajal 18 Območje podajal 8 - 400 mm/min Hitri pomik 1200 mm/min Skupna priključna moč 2,2 kW Teža stroja cca 1400 kg Potrebni prostor cca 1700 x 1400 x 1700 mm - robusten/močan univerzalni rezkalni stroj - Digitalni prikaz NEWALL - Hladilni sistem

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal tool milling machine Manufacturer: DECKEL Model: FP 1 Year of manufacture: 1976 – workshop-inspected Machine no.: 53426/08 Geometric inspection with test report Kwsdpfeflc N Ajx Abbot Accessories: - 3-axis digital readout Heidenhain ND 750 - Fixed table 600 x 210 mm (T-slot 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Steady rest with counter bearing - Operating manual - used, as seen, however without any warranty -

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1978, Universal tool milling machine Make: DECKEL Model: FP 1 with infinitely variable feed Year of manufacture: approx. 1975 – partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty Geometric acceptance with test protocol Accessories: Kwodpfx Abodf E H Aebot - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 250 mm (T-slot: 12 mm) - Vertical milling head ISO 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual - used, as seen -

Stanje: dober (rabljeno), Leto izdelave: 1966, Universal Milling Machine Deckel FP2 -WKG 512- Offered here is a universal milling machine manufactured by Deckel, model FP2. Technical Data Manufacturer: Deckel Model: FP2 Year of manufacture: 1966 Clamping surface: 730 x 240 mm Kedpfeurk Exsx Abbjwt Hydraulic vice jaw width: 125 mm Clamping range: up to 225 mm Collet set: 0.5 mm – 17.5 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal Tool Milling Machine Make: DECKEL Model: FP 1 Year of manufacture: 1976 - overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / RAL5008 grey blue Machine no.: 52860/08 Milling head no.: 7296/80 Kjdomhfrrjpfx Abbowt Warranty: 12 months single-shift from delivery on the mechanical components overhauled by us. Electrical and electronic components are excluded, as these have only undergone a functional test. For machines located outside our Northern Bavaria sales region, travel expenses are to be borne by the customer. Geometric acceptance test with test protocol included. Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 600 x 210 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant system - Operating manual Used, sold as seen The machine corresponds technically to the state of the art at the time of manufacture.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1976, Universal tool milling machine Brand: DECKEL Model: FP 2 Year of manufacture: 1976 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine number: 6976 with warranty Geometric inspection with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i-M, new - Fixed table 700 x 240 mm (T-slot: 12 mm) Kwodpfx Aod Tytysbbjt - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Coolant device - Operating manual -Used, as seen-

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1978, Universal tool milling machine Make: DECKEL Model: FP 2 stepless Year of manufacture: 1978 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-10147 with warranty Geometric acceptance with inspection protocol Kedpfx Aefcqfpobbjwt Accessories: - 3-axis digital readout HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread S 20 x 2 - Central lubrication, manual - Coolant system - Operating manual - used, as seen -

Stanje: dober (rabljeno), Leto izdelave: 1995, Universal tool milling machine Deckel FP 1 – several machines available, see pictures Model: FP 1 3-AXIS Heidenhain digital readout Price: from €9,500 excl. VAT Technical data: X-travel: 300 mm Y-travel: 150 mm Z-travel: 340 mm Clamping surface: 600 x 210 mm T-slots: 5 T-slot width: 12 mm Spindle speed range (vertical): 250 – 2000 rpm Spindle speed range (horizontal): 40 – 315 rpm Working spindle speed steps: 8 Feed range: 10 – 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle taper: SK 40 Dimensions/Weight: 1235 x 1160 x 1800 mm / approx. 800 kg Kjdstdcfhepfx Abbswt

Stanje: zelo dobro (rabljeno), Digital display Travel paths X/Y/Z: 400 x 200 x 400 mm Table size: 700 x 330 mm Kwodpfx Abswn Td Ejbet Tool holder: ISO 40 Hydraulic vice Completely overhauled in 2019

Stanje: dober (rabljeno), Dodatna oprema in rezervni deli za Deckel FP rezkalne stroje: Rotacijska miza 400 mm 31 držal ISO 40 S 20 s rezkalniki Vrtalno-rezkalna glava FP2-3 Vmesni blok Miza FP2, miza FP3 Paleta z rabljeno opremo Predalnik z veliko dodatne opreme: 31 dolgih vpenjalnih tulec 328E, 9 vpenjalnih tulec MK4, vmesne puše ISO 40-MK4. 16 dolgih držal ISO 40. Pogonski obroči, posebni nosilec ISO 40 S 20 (1 komplet), vpenjalne tulec 462 E. Predal z pušami, strojnimi nogami, nasprotnimi držali itd. Prodamo v kompletu. Kjdpfsx Hpd Esx Abbswt

Stanje: pripravljen za uporabo (rabljen), Fraiseuse universelle Deckel FP 2 NC TNC 320 / 321 Courses : x - 300 mm | y - 300 mm | z - 400 mm Vitesse en continu : 31,5 - 5000 tr/min Avances : 2-4000/min Avance rapide : 4000/min Porte-outil : SK 40 Kwodpfsxfkm Aex Abbst Course de la broche : 80 mm Poids de la machine : 1350 kg Vous pouvez volontiers venir voir la machine sur place. Nous pouvons organiser pour vous une expédition économique ! Vous recevrez une facture conforme. Pour les clients étrangers, une facture nette peut être établie, à condition d’avoir un numéro de TVA intracommunautaire valide. Sous réserve de vente préalable. Visitez notre boutique et découvrez également nos autres offres. Les noms des sociétés et les marques mentionnés sont la propriété de leurs détenteurs respectifs et servent uniquement à l’identification et à la description des produits. Des écarts dans les données techniques ou des erreurs dans la description de l’article peuvent survenir et restent réservés.

Stanje: zelo dobro (rabljeno), Rezkalni stroj DECKEL FP 2 iz izobraževalne ustanove Ksdpfxsx Hyuhj Abbjwt -Dobro vzdrževano originalno stanje -Pomiki X/Y/Z 400x200x400 mm -3-osni digitalni prikazovalnik "NOVO" -Kotni stroj – vpenjalna površina mize 700x350 mm -Območje vrtljajev 40–2000 obr/min -Avtomatski pomiki / hitri pomiki po vseh treh oseh -Orodni vpenjalni sistem ISO 40 -Vertikalna / horizontalna frezalna enota -Nagibna vertikalna glava z vrtalno tulejo -Hladilna naprava -Matica vretena osi X "NOVO" -Noge stroja -Strojni primež "RÖHM" -Razni nosilci za orodje -Pločevina za ostružke – podstavek stroja -Dokumentacija Dimenzije: D x Š x V 1,5 x 1,7 x 1,8 metra / Teža: 1500 kg Pridržujemo si pravico do napak in sprememb.

Stanje: rabljeno, x-pomik 500 mm y-pomik 200 mm z-pomik 400 mm Vpenjalna površina mize 700 x 300 mm Vpenjanje orodja SK 40 - S20 Pomik 8 - 400 mm/min Hitri pomik v X in Z 1200 mm/min Kjdpsx Hay Dsfx Abbjwt Število vrtljajev 40 - 2000 obr/min Skupna potrebna moč 2,2 kW Teža stroja ca. 1400 kg Potrebna površina ca. 1500 x 1200 x 1600 mm Vključno z 2-osnim digitalnim prikazom Heidenhain