Deckel Fp 3 A nakup rabljenega (682)

Stanje: rabljeno, Krmiljenje Dialog 4 X-hod 400 mm Y-hod 315 mm Lrjdpsyyqp Aefx Afmjn Z-hod 400 mm Vrtljaji vretena 3.150 o/min Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče ogledati pod napetostjo po predhodnem dogovoru. Pribor, prikazana orodja in vpenjalna sredstva so del dobave le, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter predhodne prodaje!

Leto izdelave: 1981, stanje: dober (rabljeno), Deckel FP1 2-axis universal milling machine with Heidenhain digital readout and tilting/swivel table. SK 40 spindle taper. Machine is in good, fully operational condition. Can be demonstrated under power by prior arrangement. Lsdpfshg Embox Afmsrn

Leto izdelave: 1975, stanje: dober (rabljeno), Deckel FP3L with adjustable angle table, vertical milling head, SK 40 spindle taper, S20x2 thread. In good, operational condition. Can be demonstrated under power by appointment. Lrjdpfxsildwxe Afmon

Stanje: dober (rabljeno), Leto izdelave: 1988, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, fixed table, SK 40 spindle taper, S20x2 spindle mount. Good, ready-to-use condition; can be demonstrated under power by prior arrangement. Lrsdjrk Aaaepfx Afmjn

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 spindle taper, S20x2 spindle mounting. Good, fully operational condition; can be demonstrated under power by prior arrangement. Lodpfxsuvgnqo Afmsrn

Stanje: dober (rabljeno), Leto izdelave: 1980, Deckel FP1 Aktiv with 3-axis Heidenhain digital readout, 2 active axes, fixed table, SK 40 spindle taper, S20x2 spindle mounting. Good, fully operational condition; can be demonstrated under power by prior arrangement. Lsdpeumcmqjfx Afmsrn

Stanje: dober (rabljeno), Leto izdelave: 1985, Deckel FP1 Aktiv s 3-osnim digitalnim prikazovalnikom Heidenhain, 3 aktivne osi, togata miza, vreteno SK 40 M16. Centralno mazanje, navodila za uporabo. V dobrem delujočem stanju, prihaja iz centra za poklicno izobraževanje. Po dogovoru možno prikazati pod napetostjo. Ledpfxjxwunzo Afmjrn

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Krmiljenje 3 osi, aktivno krmiljenje poti Heidenhain TNC 123 Število obratov 40 - 2000 min⁻¹, geometrijsko stopnjeni direktni pogon s 16 prestavami za največji navor / rezkalno moč Pomik 5 do 500 mm/min, brezstopenjsko nastavljiv Hitri pomik 1,2 m/min Izvlečna puša, vertikalni hod 60 mm, SK40, privijalni navoj M16 Lredpfxjyg I Nfs Afmen Osi X/Y/Z: 300/160/340 mm Nagibna miza 600 x 210 mm, največja obremenitev 200 kg

Stanje: rabljeno, Leto izdelave: 2002, Obdelovalni center Deckel Maho DMF 250 linear letnik 2002 in DMC 63 H letnik 2002 Lrsdpfxeyphl Es Afmen

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3L with 3-axis K&C digital display, NEW, in very good condition Technical Data: - Year of manufacture: approx. 1975 Machine No. 0924 - Fixed angular table (clamping surface 1000 mm x 440 mm) - Spindle speed: 40 – 2000 rpm - Feed and rapid traverse on 3 axes - Feed: 10 to 500 mm/min - Rapid traverse: 1500 mm/min in all feed directions - Drive power: 2.2 kW - Travel X/Y/Z: 800/300/400 mm (Y-axis travel displacement additionally 200 mm) - Equipment: vertical & horizontal spindle - Extendable vertical quill and horizontal quill SK40 - Drawbar system S20x2 - Weight approx. 1900 kg Accessories and Features: - 3-axis K&C digital readout, newly installed, with manufacturer’s warranty and operating manual. Display unit: reference points, set zero points, input coordinates, mm/inch switch, absolute or incremental coordinates, circle functions, hole pattern, radius milling functions, etc. - Mechanical central lubrication - Operating manual - Hydraulic vice 160 mm - Rotary table Walter 500 mm Lredpfx Aovn N Hdefmjn About the Machine: Offered is a universal milling machine Deckel FP3L in very good condition. The vertical head can be shifted by 200 mm to allow for an even larger working area. A central pump ensures lubrication of the various axes. A unique feature of this machine type is its basic design: it is a machine with a slant bed table. The movement processes are allocated to the work spindle and thus to the tool. This results in high accuracy, as different workpiece weights have no effect on the axis movements. Mechanically and electrically tested. You are welcome to inspect and test the machine under power on site.

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 2004, Nadomestni deli iz stroja Deckel Maho DMF 360 linear naprodaj. Stroj služi izključno kot vir nadomestnih delov. Stroj je popoln in vsebuje vse dele. Na primer: krmiljenje iTNC 530, kompletna električna omara, vreteno SK50 kot novo, hladilna enota, pregradna stena, regal, SK50 zglavna glava Hirth (pokvarjena), transportni trak za ostružke, IKZ sistem 80 bar, različni drugi rabljeni deli v dobrem stanju. Cene na povpraševanje, plus 19 % DDV. Lrjdjytx Dmspfx Afmen

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed As-New CONDITION Technical Data: >> Year of manufacture: 1987 Machine no. 2102-3536 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Equipment: Lodpfx Asu R D I Ssfmsrn >> 3-axis digital readout Heidenhain TNC113 >> Automatic central lubrication >> Machine lamp >> Coolant system >> Operating manual, spare parts catalogue About the machine: Offered here is a Deckel FP1 universal milling machine, year 1987, in an as-new, original condition. The machine has very minimal backlash and all spindles move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed can be infinitely adjusted on all three axes, and the machine also features rapid traverse on these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain position control, you can enter dimensions which the machine then approaches automatically. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. The machine has been mechanically and electrically inspected. Thanks to the Heidenhain digital readout, working with the machine is easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F729 Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed Very good CONDITION Technical Data: Ljdpeu T D Nrofx Afmjrn >> Year of manufacture: 1992 >> Machine number: 2102-6289 >> Rigid angular table (freshly planed) >> Spindle speed: 40–2000 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable 100 mm on spindle carrier >> Vertical and horizontal quill – SK40 >> Drawbar system S20x2 >> Weight approx. 800 kg Accessories and Features: >> 3-axis Heidenhain TNC113 digital display >> Coolant system >> Operating manual, spare parts diagram About the machine: For sale is a Universal Milling Machine Deckel FP1, year 1992, in very good condition. The machine has minimal backlash and all slides move smoothly. Even at maximum speed, the milling machine runs very quietly. On this newer FP1 model, the feed on all three axes is infinitely variable, and the machine also features rapid traverse in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain DRO, you can enter dimensions and the machine will automatically move to them. The FP1 was previously used in a training facility and was only occasionally operated. Oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. You are welcome to inspect and test the machine under power at our premises.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, F736 Universal Milling Machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 retrofit by FA Huttelmaier Very good CONDITION Technical Specifications: - Year of manufacture: 1985, Machine no. 2102-2891 - Fixed angle table - Spindle speed: 40 – 2000 rpm - Infinitely variable feed on 3 axes - Rapid traverse on 3 axes - Drive power: 1.5 / 1.9 kW - Spindle brake - Travel (X/Y/Z): 300 / 160 / 340 mm - Vertical milling head movable 100 mm on column - Vertical and horizontal quill – ISO 40 taper - Drawbar system S20x2 - Weight approx. 800 kg Accessories & Equipment: - 3-axis digital readout Heidenhain TNC111 - Coolant system Lredpfx Afou Nvwvjmon - Operating manual, spare parts diagram About the machine: Offered here is a universal milling machine Deckel FP1, year 1985, in very good condition. The FP1 was overhauled in 2008 by the company Huttelmaier. The machine has minimal play on the handwheels and all leadscrews move smoothly. Even at maximum speeds, the milling machine runs very quietly. On this newer FP1 model, feed is continuously variable on all three axes and, in addition, the machine features rapid traverse on all axes. A major advantage is the active 3-axis digital display. With this Heidenhain path control, you can enter dimensions which the machine automatically moves to. The FP1 was located in a training workshop and was only used occasionally. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to inspect and test this gem on site under power.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis digital readout RSF 2006 Complete Overhaul - TOP Condition Technical Data: Lodpfx Ajvb Ud Usfmorn >> Machine No. 53819/08 >> Fixed angle table >> Spindle speed: 40 - 2000 rpm >> Power feed on 2 axes >> Drive power: 1 / 1.5 kW >> Travel X/Y/Z: 300/150/340 mm >> Vertical and horizontal quill - SK40 >> Spindle brake >> Drawbar type: S20x2 >> Weight approx. 700 kg Accessories and Equipment: >> 3-axis digital readout by RSF Elektronik >> Coolant system >> Machine feet About the machine: For sale is a Deckel FP1 universal milling machine in very good condition. The Deckel has very little backlash and all feed screws run smoothly. An oil change was performed. The FP1 underwent a complete overhaul by Huttelmaier in 2006 and has been used only sparingly since then. The RSF digital readout makes operation easier and even more precise. Take the opportunity to inspect and test-run this machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed – Excellent CONDITION Technical Data: >> Year of manufacture: 1984 Machine no.: 2102-2601 >> Swivelling, tilting, and rotating table >> Spindle speed: 40 – 2000 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable on spindle carrier by 100 mm Lsdpfx Afou Racrsmern >> Vertical and horizontal quill – SK40 >> Draw-in system S20x2 >> Weight: approx. 800 kg Accessories and Features: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Operating manual, spare parts list About the machine: Offered is a universal milling machine Deckel FP1, year 1984, in excellent condition. The machine has very little backlash and all lead screws move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. This newer FP1 model features infinitely variable feed on all three axes and also has rapid traverse in these axes. A major advantage is the active 3-axis digital readout. With this Heidenhain control, you can enter measurements that the machine will approach automatically. The FP1 was housed in a training workshop and was only occasionally used. An oil change has been carried out. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP4M with 3-axis Heidenhain active digital readout – Excellent condition, CE compliant!!! Technical Specifications: >> Year of manufacture: 1992 Machine No. 2203-8449 >> Fixed angle table >> Spindle speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse: 1300 mm/min >> Travel X/Y/Z: 500/400/400 mm >> Vertical milling head adjustable on spindle carrier >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable 90 mm >> Hydraulic drawbar system >> Weight approx. 1600 kg Accessories and Equipment: Lrsdpfx Afou Tuk Homon >> 3-axis active Heidenhain digital readout >> Coolant system >> Chip tray >> Centralized electric lubrication unit >> Operating manual, spare parts diagrams About the machine: Offered is a Deckel FP4M Universal Milling Machine, active version, in excellent condition. The machine features minimal backlash and all feed screws move smoothly. Even at maximum spindle speeds, the milling machine runs smoothly. The machine is equipped with hydraulic tool clamping. This FP4M was only used occasionally in a government facility for training purposes. On this newer FP4 model, the feed rates on all three axes are steplessly adjustable, and the machine features rapid traverse in every axis. A major advantage is the active 3-axis digital readout. With the Heidenhain traverse control, you can enter dimensions that the machine will automatically position to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout system makes operation easier and more precise. Take the opportunity to inspect and test the machine under power on site.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal milling machine Deckel FP3 with 3-axis digital readout RSF Elektronik Z-530!! Technical Data: >> Year of manufacture approx. 1975, machine no. 0681 >> Swiveling and tilting table (completely overhauled) >> Spindle speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Drive power: 3 kW >> Travel X/Y/Z: 500/300/400 mm >> Equipment: vertical & horizontal spindle >> Extensible vertical and horizontal quill - SK-40 >> Drawbar system M16 >> Weight approx. 1300 kg Accessories and Equipment: Lrjdexu E I Hspfx Afmjn >> 3-axis digital readout RSF Elektronik Z-530 >> Coolant system >> Centralized lubrication About the machine: For sale is a Deckel FP3 universal milling machine in good condition. All spindles move smoothly. Most of the bellows are new. The swiveling and tilting table is as good as new. An oil change has been performed. The machine has been mechanically and electrically tested. The digital readout makes working easier and even more precise. Take the opportunity to inspect and test the Deckel FP3 under power on site. The machine is immediately available!!!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Lrodpfx Ajpy Eldefmjn Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, poteza s peresom: 90 mm, Dear Sir or Madam, We are pleased to offer you a very well-maintained Deckel FP4M (K) active milling machine featuring a rotary-tilt-swivel table and 4-axis digital readout. With its comprehensive equipment, this model stands out as a real highlight among conventional machine tools. The machine has been thoroughly inspected in our workshop, is in excellent condition, and is immediately ready for operation. We look forward to your inquiry! Delivery time: Available immediately Machine No.: xxxx-xxxx Year of manufacture: xxxx Table design: Rotary-tilt-swivel table Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, infinitely variable Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Further features and accessories include: 4-axis Heidenhain digital readout, 3-axis active control, hydraulic tool clamping, rotary-tilt-swivel table, coolant system, leveling feet, operating manual, and much more upon request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request, we offer a complete or partial overhaul of the selected machine - You are free to choose the paint color of your selected machine - Upon request, you can order additional accessories such as tools directly - If desired, we can install further accessories such as safety devices - We are happy to take care of shipping and/or installation as well Lrsdpfevvtlgex Afmjn

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, poteza s peresom: 90 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 50 obr/min, Oprema: dokumentacija / priročnik, Dear Sir or Madam, We are pleased to offer you a partially overhauled milling machine of the type Deckel FP4M (K) aktiv. Thanks to its extensive features, this model stands out as a true highlight among conventional machine tools. The Deckel FP4MK has been thoroughly and partially refurbished in our workshop, bringing it to an absolutely top condition, making it technically, visually, and geometrically almost indistinguishable from a new machine. We look forward to receiving your inquiry! Delivery time: on request Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min, stepless Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Axis travel (X/Y/Z): 500/400/400 mm Tool holder: SK40 Drawbar system: hydraulic Vertical quill stroke: 90 mm Weight: approx. 1600 kg Table design: rigid angular table or rotary/swivel/tilt table Additional features and accessories include: Heidenhain 3-axis digital readout with active control, hydraulic tool clamping, coolant system, leveling feet, technical documentation, and much more on request… Our service promise to you: - We are a certified master company specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine Lrjdpsx Irwdjfx Afmsn - You can freely choose the color of your selected machine - If desired, you can order additional accessories, such as tools, directly - On request, we can install additional accessories, such as safety devices - We are happy to handle shipping and/or installation for you

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, obratovalne ure: 39.945 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 450 mm, pomik osi Y: 580 mm, pomik po osi Z: 400 mm, proizvajalec krmilnikov: Heidenhain iTNC 530, skupna višina: 2.900 mm, skupna dolžina: 5.500 mm, skupna širina: 2.650 mm, hitrost vretena (min.): 28.000 obr/min, dovod hladilne tekočine: 40 letvica, Year of manufacture: 2013 CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 450 Travel Y-axis mm: 580 Travel Z-axis mm: 400 C-axis indexing degrees: 360º (0.0001) A-axis indexing degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Axis acceleration m/s²: 13 NC milling/turning table: Number of pallets: System 3R (21 pallets type GPS 240, 30 pallets type GPS 120, and 24 pallets type ITS50) Pallet dimensions mm: baseplate for root pallet Max. workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm); and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Max. spindle speed rpm: 28,000 Spindle drive power kW: 35/25 (40% DC / continuous) Cooling Coolant supply through spindle bar: 40 Tank volume liters: 600 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 120 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rotating viewing windows Rinsing gun Blow air through spindle center, selectable via M function Laser tool measurement for measuring tool length and diameter 3D quickSET Preparation for external pallet transfer Precision package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Tool holders not included Tools not included Paper band filter Machine run time: Hours powered on: 62,983 Spindle operating hours: 39,945 Total power requirement kVA: 55 Base machine: Dimensions / Weight Ledpexv Av Rjfx Afmorn Length mm: 5,500 Width mm: 2,650 Height mm: 2,900 Weight kg: 9,500 + System 3R

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Control: Deckel Dialog 11, equipped with a vise, inspection is possible. Lrodpfxsqi D S Ue Afmon

Stanje: dober (rabljeno), Three-phase motor, electric motor, brake motor Lredpfoul H Dwex Afmen - Manufacturer: Siemens, electric motor type 1LC3113-4BB23 Z from a Deckel FP4L milling machine - Power output: 4.0 kW - Speed: 1435 rpm - Mounting type: B14 - Protection rating: IP 44 - Brake: Disc brake type EK5dB24 - Dimensions: 575/270/H225 mm - Weight: 64 kg

Stanje: rabljeno, Motor power 3 kW Total power requirement 3 kW Weight 1,400 kg O F F E R We can offer you from stock, subject to prior sale and errors: DECKEL Universal Tool Milling Machine with FAGOR 3-axis Digital Readout Type FP 3 Year Serial No. Table travel: longitudinal, motorized / manual 490 / 500 mm vertical, motorized / manual 370 / 380 mm Transverse milling slide travel, motorized / manual 290 / 300 mm Fixed angle table 2230 420 x 800 mm Installation height under spindle 90 - 470 mm Spindle taper SK 40 18 spindle speeds 40 – 2,000 rpm 18 feed rates 10 – 500 mm/min Rapid traverse 1,500 mm/min Spindle drive motor 3 kW Total drive 3 kW - 380 V - 50 Hz Weight 1,400 kg Accessories / Special features • FAGOR 3-axis digital readout V 300 (glass scales) with advanced functions such as chain dimensions, absolute dimension, mm/inch switching, etc. • Movable DECKEL universal vertical milling head, tiltable +/- 90° • Original DECKEL tool cabinet with extensive accessories such as various tool holders, collet chuck with approx. 20 collets, long arbor, various spacer rings, driving dogs, clamping devices, operating tools, etc. • DECKEL large, fixed angle table, 420 x 800 mm, mounted • DECKEL universal dividing head with direct and indirect indexing, various index plates • Additional manual DECKEL universal rotary table ? 380 mm with direct and indirect indexing, various index plates • Coolant equipment, chip tray, central lubrication, separate control cabinet, operating manuals Lrodpfxjv Nq Sko Afmjn Condition: Very well-maintained condition! Ideal machine for training workshops or small batch production! Please click here for a video of the machine: FP3/4 Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice We always have a wide selection of conventional and CNC milling machines in stock. Please contact us!