Bona Edge nakup rabljenega (5.777)

Stanje: rabljeno, Leto izdelave: 2008, Rabljeni stroj Leto izdelave: 2008 Tehnični podatki sledijo Stroj je bil uporabljen v Nemčiji in redno vzdrževan (zadnje vzdrževanje pri podjetju Homag v 11/2024) Povratna transportna enota, prikazana na slikah, ni vključena v dobavo! Razpoložljivost: kratkoročno Skladišče: Litva Hsdpjwx Aaqsfx Ah Denu

Stanje: novo, - new - - The edge sanding machine type SK-1 is ideally suited for sanding large, curved, and straight workpiece edges. - The main application area of the SK-1 is the sanding of radii and shaped parts. - The sanding unit, with its radii of 80 mm, 300 mm, and 1000 mm, also features a straight sanding surface. - The pneumatically height-adjustable, stepless oscillation and the heavy cast iron sanding unit ensure full utilization of the sanding belt and precise sanding results. - The generously designed all-round worktable with integrated extraction allows for easy and ergonomic operation. - The SK-1 is equipped with pneumatic unit oscillation and pneumatic belt tensioning. Hnedpfx Ahevyupus Deu Technical data: Motor power: 4 kW Belt speed: 15 m/sec Oscillation stroke: 30–150 mm Belt length: 2700 mm Belt width: 150 mm Table size: 2000 × 1000 mm Space requirement: 3000 × 1500 mm Extraction: 1 x 140 mm Weight: approx. 560 kg Item no. 1020-200000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, obratovalne ure: 759 h, Edge banding machine Akron 1130 J Year of manufacture: 2020, recently serviced - 7.1 kW, 7 bar - Edgeband thickness: max 5 mm - Panel thickness: max 50 mm Hedowzycnopfx Ah Denu - Roll material thickness: max 3 mm - Workpiece length: min 150 mm; workpiece width: min 85 mm - Feed speed: max 9 m/min - Glue system: granulate, glue pot below; BIESSE glue system SP 01, quick-change glue pot - Strip magazine, spraying unit - Equipped with BIESSE jointing unit RT 01 - Preheating zone, cross-cut saw unit: 1 motor, BIESSE cross-cut saw unit IT 01 - Flush/radius/chamfer stations: 1 BIESSE fine trimming unit RF 01 - Corner rounding unit: 1 motor, BIESSE corner rounding unit AR 01 - Scraper unit: profile scraper, flat scraper - Buffing unit - Nesting equipment: flush/radius/chamfer stations, profile scraper - Version: Left-handed machine - Machine length: 4,215 mm; weight: 1000 kg - Total operating hours: 759.48 h; total processed meters: 46,284 m MACHINE APPROXIMATELY AVAILABLE FROM CALENDAR WEEK 42/2025!!

Leto izdelave: 2006, Stanje: zelo dobro (rabljeno), Swivel angle: 135° Motor: 1.1 kW Table height: 860 mm Table size: 800×1000 mm Spindle dimensions: 28 x 90 mm Spindle speed: 1,500 rpm With feed unit: Hnedjhr D Ayepfx Ah Deu Felder S/308, year 2011 and accessories

Stanje: dober (rabljeno), 1 x Edge Grinding Machine Manufacturer: Christen Model: KB 2 Technical Specifications: Working Area: Rule length: 370 mm Sheet thickness: 0 to 2 mm Maximum edge clearance with fully opened stop: 3 mm Speed: 3400 rpm Grinding wheels: 150 x 125 x 42 mm + 125 x 90 x 42 mm Accessories: Hnjdjfwx Daepfx Ah Deu 2 x grinding wheels with flange 1 x additional flange 1 x wrench for grinding wheel change The machine can be inspected under power.

Stanje: rabljeno, Oscillation: yes / no Heavy-duty sanding device: yes / no Veneer sanding device: yes / no Tiltable up to: yes Motor power: 2.2 kW Table size: 1000 x 350 mm Hnsdpfx Aewzmuweh Dou Sanding width: 200 mm Weight: 300 kg Edge sanding machine Langzauner LZK 3/2, BB 200 ----- Technical manufacturer's description: Table width: 345 mm Table length: 1000 mm Max. sanding belt width: 200 mm Sanding belt length: 2600 mm Main motor: 3 kW Round sanding support: yes Oscillation: yes Table height adjustment: manual Sanding belt tiltable: yes Space required (length): 1800 mm Space required (width): 900 mm ----- Price of the above-mentioned machine upon request! (Technical data according to manufacturer – subject to change and without guarantee!) All prices quoted are net, plus statutory VAT. No original photos available yet, image from brochure of the same model.

Stanje: novo, Leto izdelave: 2022, New machine Year of manufacture: 2022 Single-sided automatic edge banding machine with pre-milling unit, hot melt adhesive application on straight workpieces (EVA-PUR glue pot with emptying function optional), HF cross-cut saw unit, HF milling unit, corner rounding unit, chain feed, double roller top pressure, extendable workpiece support rail, signal lamp for workpiece tracking, and integrated line control for contactless operation of processing functions. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths of 0.4 – 3.0 / 6.0 mm and workpiece heights of 8 – 60 mm. Feed speed: 10.0 m/min; 8.0 m/min with corner copying. 3 free spaces for finishing units. 10" color touch screen. Machine length: 4,030 mm Workpiece thickness: 8 – 60 mm Minimum workpiece width: approx. 75 mm Minimum workpiece length: approx. 120 mm (min. approx. 200 mm with corner copying) Edge thickness: 0.4 – 3.0 mm Pre-milling unit chip removal: 0 – 2.0 mm, stepless Total connected load: 7.5 kW – 400 V Feed speed: 10 m/min; 8 m/min Pneumatic connection: 6 bar Net weight: 1,050 kg Options: - Surcharge for radius scraper unit with air blow-off device + extraction - Surcharge for surface scraper unit + extraction - Surcharge for buffing unit - EVA/PUR glue pot with emptying function - Surcharge for diamond tools, height=65mm, for pre-milling unit - Riepe spray device (anti-adhesive) on pre-milling unit Hnodpsxllvfefx Ah Deu - Riepe spray device (cleaning spray before buffing unit) - Pipe system with 90° elbow + manual slide valve, mounted on machine, D=200 mm Availability: short-term Location: Hochheim

Stanje: rabljeno, Leto izdelave: 2018, Edge Banding Machine AKV 3006 DK-F with Jointing Cutter Unit including DIA Tools - Jointing thickness up to 40 mm - Workpiece thickness up to 3 mm - Combination milling station Radius R 2.5 mm Technical Description: - Hot-melt glue application to the workpiece for edge materials up to 3 mm - Workpiece thickness: 60 mm without jointing unit, 40 mm with jointing unit - Maintenance-free, coated glue pot - HF trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable knives (combination design) and fine adjustment of the cutter from the operator side - Provision for additional processing units (System Hebrock) - Feed rate approx. 10 m/min - Cutting depth adjustment of the trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically positioned control panel - Double roller top pressure beam - Aggregate viewing window from the rear and operator side of machine - PLC control including touchscreen Technical Data: - Feed speed: 10 m / min - Panel thickness: 8 - 40 mm - Weight: depending on configuration approx. 1550 kg - Dimensions (L x W x H): 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment (1 pc) Switchable radius/chamfer for combination milling stations. Switching between chamfer or flush is manual by repositioning the stop flap inside the machine. Buffing unit (polishing mop): 1 pc Corner rounding cutter: 1 pc, incl. combination tool and pneumatic radius/chamfer adjustment, max. workpiece thickness 40 mm, minimum workpiece length 300 mm, radius R 2.0 mm Radius scraper: 1 pc, incl. pneumatic retraction device, radius R 2.0 mm Flat scraper: 1 pc with pneumatic control Hodpfx Asxfh Tmoh Denu Glue station quick-change system including second glue pot and downward glue discharge (1 pc) for rapid color change Horizontal grooving saw unit into the edge: 1 pc, incl. pneumatic retraction and groove tool Separate extraction for jointing unit: 1 pc, direct connection on the jointing unit, vertical above, d = 80 mm for optimal extraction performance; strongly recommended from model AKV 3005 DK-F Ball bearing for corner rounding cutter, 24.1 mm: 1 pc Ball bearing for corner rounding cutter, 24.2 mm: 1 pc Replacement motor 0.37 kW for corner rounding cutter, with quick-change system including radius cutter R 1 Replacement spindles, 1 set = 2 pcs 1 set quick-change motors for longitudinal machining, top and bottom, including tool R 1 Compressed air requirement: 100 – 150 l/hr Location: Nattheim

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Single-sided laser and PU edge banding machine incl. panel return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min Hnodpexgrfpefx Ah Deu - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edgebanding material, rolls: 0.3 – 3 mm Edgebanding material, strips: 0.4 – 20 mm PC22 control Control system: Powertouch Units & Gluing Jointing milling unit S2 Automatic horizontal adjustment for jointing Automatic vertical adjustment for jointing Lasertec activation unit Performance Basic gluing unit A20, extension module Magazine upgrade to 6 rolls Horizontal free-standing roll support plate Continuously adjustable edge pressure shoe Suction device for strip separation Servo edge feeding Edge thickness measurement for roll material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Pressure zone wetting unit Separator agent spraying unit top/bottom End trimming unit HL86 chamfer/straight 0.22 kW servo Pneumatic adjustment for trimming motor Automatic adjustment for end stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-shape milling unit MF21 servo Separator agent spraying unit top Contour trimming unit FK31/20-cycle Powertrim Contour trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of: Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Solid wood edge gluing Automatic adjustment infeed fence 500 mm infeed extension Sliding carriage Scissor-type workpiece support table Extension for scissor-type table Workpiece thickness 8 mm instead of 12 mm Volt-free contact Flexible edge sequence management software Gap setup Panel return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Stanje: rabljeno, Leto izdelave: 1984, Technical Specifications: Longitudinal travel (X-axis): 15,900 mm Horizontal infeed travel (Z-axis): 790 mm Vertical infeed travel (Y-axis): 500 mm Swivel range of the milling spindle: 45° +/- Milling spindle drive power (DC motor): 50 kW Milling spindle diameter at front bearing: 160 mm Hedpfovvll Ssx Ah Donu Internal tool holder: ISO No. 50, DIN 2079 External tool holder: ISO No. 60 Tool clamping: manual via M24 threaded rod Spindle speed, continuously variable in 2 ranges: 50–500 rpm Speed range, 1st stage: 50–250 rpm Speed range, 2nd stage: 100–500 rpm Stage ratio: 1:2 Constant power range: 160 rpm Max. torque at the milling spindle: 2,000 Nm Milling feed in X direction, continuously variable: 40–4,000 mm/min Rapid traverse: 8,000 mm/min Adjustable feed rate in Y and Z directions, continuously variable: 20–500 mm/min Rapid traverse Y and Z axes: 1,000 mm/min Max. swivel speed of milling spindle: 2°/sec Display resolution for all three axes (positioning accuracy): 0.1 mm Operating voltage: 380 V, 50 Hz Control voltage: 220 V Distance from clamping table to retracted, horizontal spindle nose: 500 mm Distance from column support (floor) to spindle center in vertical middle position: 1,300 mm Distance from clamping table to center of support guide: 2,300 mm Length of column and support guide: 16,800 mm Weight: approx. 23,000 kg Defects: Partial leakage at the clamping cylinders

Stanje: zelo dobro (rabljeno), Robna lepilka SCM K100, predhodni rezkarji, nanos lepila z valjčkom, zamenljiv rezervoar za lepilo, pnevmatska predreza giljotina, pritisni valji, krožna žaga za končno rezanje, Hjdpfoxpfc Hox Ah Djnu rezkalna enota zgoraj-spodaj R1 – R2, profilna strgala, ploska strgala, dolžina stroja 315 cm, pomik 7 m/min, maksimalna višina elementa 50 mm, minimalna dolžina elementa 170 mm, maksimalna debelina robnega traku 3 mm, Rabljeni stroj, zelo dobro ohranjen. Možnost preizkusa pred nakupom. Možen nakup preko leasinga.

Stanje: rabljeno, OTT Pacific V12 - Spajanje SPS-krmiljenje z LCD prikazovalnikom Predrezkalna enota s potopnim vodenjem Polavtomatski valjčni magazin / škarje za kapanje Hitrostna lepilna postaja Avtomatska pritiskalna enota Pnevmatsko poravnavanje robov 0-10° Poravnava/posnetje robov 15/30/45° - 8 mm Radialno rezkanje R-2, R-5 Zaobljanje vogalov Radialno vlečno rezilo Površinsko vlečno rezilo - bo predelano v agregat za poliranje Hjdpfx Asw Nqg Eeh Donu Zvočno izolirana kabina z odsesovanjem Stroj je DELAVNIŠKO PRENOVLJEN v ZELO DOBREM STANJU Na zalogi v Lieboch

Stanje: rabljeno, Leto izdelave: 2008, Rabljeni stroj Leto izdelave: 2008 Stanje: Preverjeno delovanje Oprema in tehnični podatki: Lepilni bazen z valjem Krožne škarje Prizna cona Hedpfxjxllvlo Ah Dsnu Krožna žaga Kombinirani rezkalni agregat Strgalo za površine Podvozje Debelina robnega materiala: 0,5-3 mm Minimalna širina obdelovanca: 90 mm Minimalna debelina obdelovanca: 10 mm Maksimalna debelina obdelovanca: 45 mm Minimalna dolžina obdelovanca: 50 mm Previse robnega materiala zgoraj in spodaj: 2,5 mm Previse robnega materiala spredaj in zadaj: 10 mm Lokacija: Hessen Razpoložljivost: konec novembra/začetek decembra 2025

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a production line) Edgebanding material (coils) thickness (min/max) mm: 0.3 / 3 – Edgeband thickness in strips / tapes max mm: 1.0 Panel thickness (min/max) mm: 8 / 45 (60) Working width (min/max) mm: 236 (266) / 3300 Control/Software: ICOS Open (Windows based) Feed speed (adjustable) m/min: 10 - 50 (Master & Slave) Protective and noise reduction cabins FORMATTING SECTION (for each side): Pre-milling cutter (pre-milling) 75.186 (1 x 4.4 kW) Milling unit (2 x 6.6 kW) Max 35 m/min Jointing milling unit 75.186 (1 x 4.4 kW) EDGEBANDING SECTION (for each side): Gluing unit (P.U.R. glue + pre-melter) VTG 3-24 + 283.203 Pressure zone + edge magazine for rolls (slot no. 24) End trimming unit 08.42 / 30 / B (2 x 0.66 kW) 30 m/min (0°-25°) Pre-milling/milling unit 08.055 (2 x 1 kW) 0°-30° (30 m/min) Multifunctional unit (radius & contour milling unit) MFA 08.342 (2x0.66 kW) SERVO Max 20m/min OPTIONAL: KFA 30 Hodpfx Aoxggzleh Denu Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing liquid) Buffing unit 08.604 (0.25 kW x 4) 2 x standard milling units for grooving/rabbetting (1x left + 1x right) 08.190 (4.5 kW x2) 90°/180°/270°

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: AA/H113802, SCM Edge Bander Mod. OLIMPIC K500 "T-E" Version - USED CE - Pre-milling unit - Gluing unit with pre-melter - End trimming unit with double blade - Trimming unit - Edge scraping unit - Glue scraping unit - Brushing unit - Year 2008 (CE) - Serial no. AA/H113802 Hedpfx Asr Iynbeh Donu

Stanje: zelo dobro (rabljeno), Digital 3D Edge Finder MarTest 802 EW Working range X, Y, Z axis: -2 to 4 mm Hnodpfx Aeqff Rmeh Dou Increment value (mm): 0.005

Stanje: rabljeno, Holz Her Sprint 1317-1 FÜ + PU Heavy-duty model – edge thickness 0.4 - 5 mm PLC screen control Large LCD display Pre-milling unit for jointing before the glue application section Fully automatic edge magazine for rolls and strips Hnsdpjwtz T Sefx Ah Deu Glue application unit for cartridges and PU gluing Maximum edge height: 51 mm Automatic glue height adjustment Pressure unit 1913 motorized pneumatic End trimming unit for rolls and strips With pneumatic adjustment for 0-10° angle of the end trim saws Multi-function milling unit 1942 MOT 2 Milling unit with motorized positioning axes for processing various radii – chamfers – flush trimming via PLC Corner copying milling unit 1832 for corner copying up to R 3 mm + postforming up to R 6 mm Scraper unit for chamfers and radii Pneumatic infeed and outfeed Finish – flat scraper Regular maintenance by Holz Her Machine is FACTORY SERVICED in TOP CONDITION Available from stock in Lieboch

Stanje: rabljeno, Leto izdelave: 2015, Stroje używane Rok produkcji: 2015 Wyposażenie i dane techniczne: - Maszyna bazowa z ręczną regulacją mostka dociskowego - Wysuwany stół podtrzymujący obrabiany element - Zespół frezowania wyrównującego FG 201 z 2 głowicami frezującymi - Podajnik obrzeża z pojedynczym podawaniem automatyczny transport obrzeża w rolkach i paskach - System nakładania kleju Glu Jet GJ 301 automatyczna regulacja wysokości kleju (dysza z czujnikiem) - Zespół dociskowy 1912-3, pneumatyczny - Zespół odcinający 1918 (60 mm), pneumatyczny - Pokrywy odciągu do zespołu odcinającego - Zespół frezujący wielofunkcyjny FR 201 - Zespół kopiowania naroży 1832 do 3 mm grubości obrzeża - Zespół cykliny 1929 - Skrzynka na wióry - Cyklina płaska 1964 - Zespół polerujący 1940 - Kompletny system spryskiwania 1856 Minimalna długość elementu: 160 mm Grubość elementu: 60 mm Grubość obrzeża: 0,4–6 mm Prędkość posuwu: 10 m/min Długość całkowita: 4630 mm Waga: 1250 kg Mostek odciągowy widoczny na zdjęciach nie wchodzi w zakres dostawy! Lokalizacja: Hesja Dostępność: ok. grudzień 2025 Hsdjxllvrspfx Ah Denu

Stanje: zelo dobro (rabljeno), DVOJSTRANA FORMATNA I MAŠINA ZA NANOŠENJE IVICA – Prva (1.) mašina u liniji Debljina ivice u roli (min/max) mm 0,3 / 3 Debljina ploče (min/max) mm 8 / 45 (60) Radna širina (min/max) mm 250 / 1300 Upravljanje / softver ICOS Open (Windows baza) Brzina pomeranja (podesiva) m/min 10 - 50 (Master & Slave) Zaštitne i zvučno izolovane kabine FORMATIRANJE (za svaku stranu): Agregat za obradu ivica (2 x Kw 6,6) Maks. 35 m/min Agregat za pripremu ivica 75.186 (1 x Kw 4,4) OBRADA IVICA (za svaku stranu): Lepilni agregat (P.U.R. lepak + pretopni uređaj + Hot Melt lepak) VTG 3-24 + 283.201 + 283.19 + 283.203 Pritisna zona Magacin ivica za rolne (pretinac br. 24) Predfrézerski/frézerski agregat 08.055 (2 x Kw 1) 0°-30° (30 m/min) Predfrézerski/frézerski agregat 08.055 (2 x Kw 1) 0°-30° (30 m/min) Agregat sa profilnom vučnom nožem 08.515 Agregat sa ravnom vučnom nožem 08.521 Agregat za poliranje 08.617-2 (2 x Kw 0,18) Hnodpsxggthefx Ah Dou 3 x standardni frézerski agregati za nutovanje/pravljenje falcova (2 levo + 1 desno) 08.190 (Kw 4,5x3) 90°/180°/270°

Stanje: rabljeno, Hebrock K34 SPS screen control with 15" touchscreen Pre-milling unit for processing before the gluing section (3 mm) Glue pot with interchangeable tank and glue discharge device Maximum edge height: 60 mm End trimming unit Flush milling unit for straight, radius, and chamfer milling Corner rounding unit for radii and chamfers Multi-radius scraper (R1/R2) Nesting Flat scraper Release agent spraying unit Year of manufacture: 2023, 52 operating hours Machine is AS NEW and in TOP CONDITION From workshop closure / retirement Directly from the joinery Hjdpowtfvkjfx Ah Djnu

Stanje: rabljeno, Leto izdelave: 2011, Rabljeni stroj Stroj popolnoma obnovljen in servisiran Oprema in tehnični podatki: Brezstopenjska podajalna hitrost 10-18 m/min Krmilna enota Edge Control 19 z 18,5'' barvnim zaslonom na dotik Enota za predrezovanje Dovod roba Postaja za nanašanje lepila s kartušo, tipalna šoba z avtomatsko nastavitvijo višine lepila Tiskalna enota Enota za kapanje Multifunkcijska rezkalna enota Kopirna rezkalna enota Enota za radiusno strgalo Ploskovno strgalo Polirna enota Debelina obdelovanca 6–60 mm Debelina roba 0,4–8 mm min. širina obdelovanca 60 mm Najkrajša dolžina obdelovanca 180 mm Teža cca 2200 kg Hedpewka N Tjfx Ah Denu Lokacija: Flörsheim Razpoložljivost: kratkoročno

Stanje: rabljeno, OTT Tornado - TOP Control system – via a 15-inch color touch monitor for full automation and maximum operating comfort CM-CombiMelt gluing system suitable for processing EVA and PUR hot-melt adhesives as well as all standard cleaning granules Hsdpfswcymcex Ah Denu Joining unit for attaching chipboard panels Automatic roll magazine Automatic edge magazine Double trimming unit automatic tilting 0° / 3° Flush milling unit – for flush milling – 12mm Fine radius milling unit – radius milling – profile cutter R2–R5 Automated copying router – corner rounding Scraper unit – radius Scraper unit – radius – bevel Surface scraper unit Sliding agent spray device – PU Cleaning set with fine polishing unit Very stable workpiece support with roller conveyors – FRONT with scissor extension Complete tool set included Machine is AS NEW in EXTREMELY WELL-MAINTAINED CONDITION First commissioning 2011, very few operating hours, approx. 1200 Machine from lease return / leasing possible Ex stock Lieboch

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Machine number: 133 Machine has been completely overhauled New Glue Jet 301 gluing system (upper part 1 mm) All units checked All cutters sharpened All knives replaced - Electrical system for stepless feed, 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control system with 15" touchscreen - ECO MODE energy-saving mode - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12000 rpm) with 2 jointing cutters for panel edge jointing - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left-hand rotation for jointing unit 1801 / 1802 - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right-hand rotation for jointing unit 1801 / 1802 - Edging feed 1901 fully automatic - Gluing station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - Granulate hopper - Pressure unit 1913 MOT - Pneumatic end trimming unit 1918 (60 mm) - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm, left-hand - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm, right-hand - Contour milling unit 1833 MOT4 - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2.5 mm, left-hand rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2.5 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT2 - Carbide reversible knives for scraper holder R = 2.5 mm (2 pcs required) - Surface scraper 1964 Hodjwka Iiepfx Ah Denu - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Availability: short-term Location: Flörsheim

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Debelina robnega traku 0,4 – 3 mm SPS zaslonsko krmiljenje polavtomatski magazin robnih trakov polavtomatski magazin za role – prečna škarja Postaja za lepljenje PATRONE + PU + avtomatska kontaktna šoba Višina obdelovanca 6 – 45 mm Naglavljalna enota, nagibna 0 in 10 stopinj Poravnava – posnemanje robov – radijsko rezkanje, nagibno do 15 stopinj Profilno strgalo Polirni agregat Zvočno izolirana kabina CE izvedba Stroj je FUNKCIJSKO PREVERJEN in v DOBREM STANJU Hnjdpfx Asw Igg Sjh Deu iz zaloge

Stanje: rabljeno, OTT Atlantic SPS-Comp. krmiljenje Hedpfx Aew Np Dpeh Djnu Hitro lepilni agregat Samodejni magazin za role in robni trak Poravnani rezkalni enoti – avtomatsko vrtljivi Poravnano rezkanje Rezkanje posnetja robov – radijsko rezkanje Agregat za strganje Končna polirna enota Vsi agregati so krmiljeni preko SPS z operaterske plošče Zvočno izolirana kabina z integriranim odsesovanjem Stroj JE PREVERJEN V DELAVNICI in DELUJOČ Iz zaloge Lieboch, NETTO 3.000,00 €