Avtomatski robni stroj za zaključevanje robov

CO.MA.L. PRD/12

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Brandt Optimat KDF 420 robna lepilka Dcedpfx Anjx Dzw Nouen Krmilnik Powercontrol PC 20 Debelina nalepka 0,4-8 mm Višina obdelovanca 8-60 mm Predhodna obdelava z DIA rezkarji Odbijanje robov Ravno in radijsko rezkanje Radijski strgalo Ploščati strgalo Polirna enota Dolžina stroja 4360 mm Navodila za uporabo in orodje Letnik izdelave 2008 Cena 15000,-

Stanje: rabljeno, Leto izdelave: 1998, Used machine Year of manufacture: 1998 Proven quick-heating tank; heating-up time approx. 5 min. Safety interlock for the application roller; the roller starts only after reaching the operating temperature Centrally adjustable top pressure beam Pneumatic edge feeding and roll separation Connected load: approx. 11.5 kW, heating capacity 4.5 kW, frequency converter 300 Hz 4 kVA HF cross-cut saw unit: electrically and pneumatically controlled, motor power 0.37 kW Saw blade diameter 100 mm HF flush trimming unit: radius, straight, and chamfer milling Trimming from coil up to 3 mm Edgebanding and cross-cutting up to 5 mm Minimum workpiece length: 260 mm Minimum workpiece width: 90 mm Workpiece thickness: chamfer milling from 10 mm / radius milling from 13 mm / max. 45 mm Extendable workpiece support at the front Digital position display for feed height adjustment, edge thickness, and milling With chassis Dcedpfx Answ Tfw Hsusn With heated infeed ruler Compressed air connection 6 bar Central extraction port 100 mm Dimensions (L x W x H): 3115 x 1230 x 1200 mm Approx. 560 kg Availability: short-term Location: Flörsheim

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 / 3 Edge thickness in strips mm: 1.3 Panel thickness (min/max) mm: 8 / 40 Working width (min/max) mm: 266 / 2400 (optionally 3000) Cam pitch (mm): 540 (prepared for 270 mm) Control system: ICOS OPEN Feed speed m/min (adjustable): max. 60 m/min No transfer bar (Master & Slave systems) FORMAT PROCESSING (for each side): Spray unit (for liquid release agent) Jointing cutter unit 08.376 (4.5 kW x 2) Free space Dcodpsu Ekbnjfx Anusn EDGE GLUING PROCESSING (for each side): Gluing unit (hot melt adhesive) 283.205 Edge pressure section. Edge magazine for rolls (No. 2 positions) End trimming unit 08.42 (0.2 kW x 2) 0°-25° (max. working speed 50 m/min, servo motor) Milling unit 08.055 (0.66 kW x 2) 0°-30° Multi-function unit (radius milling and contour milling) 08.342 (0.66 kW x 2) Spray unit (for polishing fluid) Free space (for optional scraper addition) Buffing unit 08.617 (0.18 kW x 2)

Stanje: rabljeno, Leto izdelave: 2013, Used machine Year of manufacture: 2013 Very well-maintained machine Equipment: - Machine table with 13 running rollers for improved workpiece guidance - Edge infeed synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) - Three pressure rollers - Belt feed: 0.25 kW; approx. 1250 mm long; approx. 6.0 m/min; 50 mm wide toothed belt with thick, workpiece-friendly rubber pad. Digital counter for height adjustment - Direct adhesive application to the workpiece: leak-proof glue pot with glue supply from below and quick heat-up time after machine standstill - Flush trimming unit for workpiece front and rear edges, automatic workpiece sensing, pneumatic trimming with knife for cuttable edges - Flush milling unit with vertical sensing and horizontal guidance, reproducible adjustment via digital counters, 2 powerful 0.4 kW high-frequency motors, steplessly adjustable from 4000 to 18000 rpm, cutter Ø 70 mm, Z4, radius 2 mm/15°, central extraction port Ø 100 mm, 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter with the belt feed - Continuous workpiece support approx. 1800 mm long, workpiece support rail extendable by approx. 300 mm - Rotatable film tray Ø 800 mm Technical details: - Minimum workpiece width: approx. 80 mm - Workpiece thickness: 10 – 50 mm - Minimum workpiece length: approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation max.: 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Electrical connection: 400V, 50 Hz, 3Ph + N - Total installed load: 3.8 kW - Heat-up time: approx. 10 minutes - Pneumatic connection: 6 bar - Working height: approx. 880 mm - Dimensions: approx. 1800 x 700 x 1300 mm without film tray Ø 800 - Net weight: approx. 260 kg Dcjdpfxszc Agkj Anujn Availability: Short notice Location: Flörsheim