Dvosmerni formatni in robni lepilni stroj

BIESSE Stream SB2 10.5

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in a line) Edge material (rolls) thickness (min/max) mm: 0.3 - 3 Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 Bodpfsywk Elox Altolk Cam pitch (mm): 500 FORMAT PROCESSING (for each side): - Safety cutter (pre-milling) AS 10 (approx. 1 x 5.2 kW) - 2 x hoggers DT 10 (approx. 2 x 5.8 kW) - Spray device (for liquid anti-adhesive) EDGE BANDING UNIT (for each side): - Gluing unit (Hot Melt glue + pre-melter) SP30 (High Melt + Edge control EC40) - Edge pressure zone (CNC-controlled). Edge magazine for rolls (6-fold) - End trimming unit IT 90-S (approx. 2 x 0.3 kW) 28 m/min (0° - 25°) - Pre-milling unit RS 10 (2 x 0.75 kW) - Multi-profile milling unit (CNC-controlled) RF 30 (2 x 0.37 kW) 0°-25° - Multifunction unit (radius milling and profile milling) AR 30 (2 x 0.35 kW) Left: 2 x universal milling unit for grooving/rebating and profiling FB 32 (2 x approx. 5 kW) 0° - 90° Right: universal milling unit for grooving/rebating and profiling FB 30 (approx. 1 x 5 kW) 0° - 90° - Profile scraper unit RB 10 - Flat scraper unit RC 10 - Spray units (for polishing liquid) - Finishing unit (flat scraper + smoothing unit) SZ 30 (2 x 0.37 kW) - Hot air blower - Edge trimmer PH 10 OPTION: D.O.M. unstacker with support column and mobile jib (with vacuum suction grippers) for unloading and stacking edge-processed panels.

Stanje: zelo dobro (rabljeno), For sale: DDR motor pump. Bodpfx Aev Nrf Ejltjlk - 800 l/min - 28 HP - In very good condition.

Stanje: rabljeno, BIESSE STREAM SB2 10.5 double-sided edge banding machine, suitable for use as the first and second machine in a squaring and edge banding line. Numerical control with Sintra software. Machine suitable for the 1st and 2nd pass of the panel. Motorized mobile shoulder opening by CNC, 3000 mm. Panel height: 60 mm. PVC/ABS up to 3 mm. Infinitely variable feed speed via CNC (up to 40 m/min). Electronically adjustable working height via CNC (up to 60 mm). Electronically adjustable mobile shoulder opening via CNC. Motorized rubber belt with increased pressure. Bsdpfxsu Rim Hs Altjlk Support rail with covered pins – spacing between pins: 500 mm. Automatic system for supporting large panels. Anti-adhesive unit. Squaring section, consisting of (per side): * Automatic, time-controlled anti-splintering unit * Double scoring unit * Double-motor trimming unit Edgebanding section, consisting of (per side): * Gluing unit for EVA hot-melt glue with premelter * Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC * 6-position coil magazine with automatic edge changeover via CNC * Trimming unit with 2 motors and automatic tilting * Overlapping trimming group with 2 motors * Copying unit with 2 electronically adjustable tilting motors via CNC * Multifunction contour unit with 4 motors (trimming + contouring) with automatic numerical control * Milling unit (with 2 motors on fixed left side / 1 motor with 0-90° tilting on mobile right side) * Edge scraper unit electronically controlled via CNC * Glue scraper unit * Oscillating brush unit * Hot air blower unit

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: M08I/8765, Številka ponudbe: M08I/8765 Vrsta stroja: 4-matrični – 4-udarni stiskalnik Informacije: zaprt nož Proizvajalec: SACMA Tip: SP350M Letnik izdelave: 1995 Obseg premera: 14 mm Število matric: 4 Število stopenj: 5 Dolžina odseka: 127 mm Dolžina stebla pod glavo: 90 mm Kapaciteta – kos/min: 200 Lokacija: V Nemčiji Bedpfx Alswi S E Detolk

Stanje: zelo dobro (rabljeno), Double-sided FORMAT AND EDGE BANDING MACHINE (1st and/or 2nd machine in line) Edging material (edge) thickness (min/max) mm: 0.3 - 3 Bljdpou Tg Uqofx Altok Panel thickness (min/max) mm: 10 - 60 Working width (min/max) mm: 240 - 2700 Control/Software: SINITRA Feed speed (adjustable) m/min: 10 - 40 (INVERTER C.N.) Cam pitch (mm): 500 FORMATTING UNIT (per side): - Pre-milling cutter (trimming) AS 10 (5.8 kW) - 2 x Hogger DT 10 (5.8 + 5.8 kW) - Spray unit (for liquid anti-adhesive) EDGE BANDING UNIT (per side): - Gluing unit (hot-melt glue + pre-melter) SP30 (High Melt + Edge Guide Z-axis) - Edging pressure area (CNC-controlled). Edge magazine for rolls (capacity 6 rolls) - End trimming unit IT 90-S (0.3 kW x 2) 28 m/min. 0 - 25°. PNEUMATIC - Multi-profile milling unit (CNC-controlled) RF 30 (0.65 kW x 2) 0 - 25° Multi-function unit (radius milling and shaping) AR 80 (0.3 kW x 2) 25 m/min - ROTAX Motors with automatic tool change (tools with 8+8 positions) Multi-profile scraper unit (CNC-controlled) RB 30 Flat scraper unit RC 20 – Spray units (for polishing fluid) Buffing unit SZ 30 (0.37 kW x 2) With 'hopper' for panels (usable height 80 mm), as a buffer to speed up the work cycle