Kragarmregal Doppelseitig Höhe 3.500 Mm Konzolni Regal nakup rabljenega (85.135)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. Pedpfemkixwex Al Derb When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard Prjdpfxsh Ek Daj Al Djb - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Prjdpfx Asmhhl Hel Djb Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments Prodpfxsmhhf Sj Al Dsb - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Prodpfx Aljmhhyaj Dob Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Predpfx Ajmhhx Iol Djb Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm Prodsmidyfspfx Al Djb - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Predpfxsmhh Dho Al Deb - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: rabljeno, Ohra K60 konzolni regal, enostransko pocinkano, komplet 4 kosi, rabljeno 🧰 Lastnosti izdelka • Proizvajalec: Ohra • Sistem: K60 • Barva: pocinkana • Stanje: rabljeno, glejte fotografije • Nosilci: 4 kosi, višina 6.340 mm (IPE240) • Osnova: 4 kosi, globina 1.750 mm (IPE240) • Roka: 16 kosov, globina 1.200 mm (K60, nova roba) • Varnostni elementi: 32 kosov varnostnih zatičev • Montaža: 8 kosov Hilti betonskih sidrov • Nosilnost: 3.200 kg na nosilec • Nosilnost roke: 800 kg • Razmik med okvirji: 1.500 mm • Skupna višina: 6.600 mm • Skupna širina: 4.500 mm 💰 Cena: 1.950 € neto, brez DDV • Popust ob večji količini: na zahtevo • Prodaja zasebniku: brez minimalne količine naročila • Stroški pošiljanja: po vsej Evropi, na zahtevo • Dobavni rok: takoj na voljo • Ogled in prevzem: kadarkoli po dogovoru • Številka izdelka: P10459 Stalno na zalogi več kot 5000 tekočih metrov regalov za palete številnih proizvajalcev (Pridržane spremembe in napake v tehničnih podatkih, specifikacijah in cenah ter možnost vmesne prodaje! Glejte naše splošne pogoje poslovanja, vse cene so brez DDV, ob prevzemu iz skladišča.) Lenox Trading – vrhunska skladiščna tehnika in težki regalni sistemi, rabljeni in novi Opis: Iščete visokokakovostne skladiščne regale za nakup? Lenox Trading je z okoli 100 lastnimi zaposlenimi eden največjih trgovcev z novo in rabljeno skladiščno tehniko v celotnem območju DACH (Avstrija, Nemčija, Švica). ⚡ TAKOJ NA VOLJO: • Več kot 10.000 tekočih metrov regalov, takoj na voljo • 20.000 m² skladiščnih podestov in jeklenih podestov, takoj na voljo • 30–50 tovornih priklopnikov blaga na teden za maksimalno izbiro 📦 NAŠA PONUDBA (UGODNO KUPITE V SPLETU): Ne glede na to, ali kupujete regal za palete, težki regal, visoki regal, regal s policami ali regale za IBC-posode – dostavljamo in montiramo po vsej Evropi s svojo lastno ekipo! Vključno s CAD načrtovanjem, transportom, demontažo in montažo. 🏭 VRHUNSKE BLAGOVNE ZNAMKE, RABLJENE IN IZ LIKVIDACIJE/STEČAJA: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, težki regal Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 Podpsz Eqttofx Al Dsrb • Konzolni regali (Elvedi konzolni regali, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠ DRUGI STOPILEC: SPLETNE DRAŽBE IN LIKVIDACIJA Pri demontažah in čiščenjih ponujamo popoln paket brez skrbi: 1. Pavšalni odkup: odkup trgovskega blaga, opreme in celotnih skladiščnih zalog, vključno z popolnim čiščenjem prostora. 2. Prodaja s provizijo: izvedba dražb v našem imenu. Naše celovite storitve, ki jih opravljajo naši zaposleni: katalogizacija, priprava pisarn, pregledi, izročitev blaga, logistika, demontaža in čiščenje prostora. Ne glede na to, ali ste na nas naleteli zaradi težkih regalov ali iščete pocinkani težki regal / težki regalni sistem, zagotavljamo najboljše pogoje. Kontaktirajte nas za neobvezno ponudbo!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth Pjdpfomhh Dzex Al Dorb - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation Podjmhh Dtspfx Al Dorb - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times Psdpemhh Anefx Al Dorb - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth Psdpfjmhhypex Al Derb - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel girders, wooden slats, and sheet material. With an overall length of approx. 13.20 meters, a height of approx. 4.00 meters, and arm lengths of approx. 120 cm, this long goods rack offers high storage capacity across a total of 4 storage levels (base level + 3 levels). Each cantilever arm supports up to 500 kg, and each upright can bear up to 2,250 kg. The cantilever arms are bolted and can be variably adjusted in height via a 200 mm hole grid. The fully hot-dip galvanized material ensures long-lasting protection for both indoor and outdoor use – Available as new stock from our warehouse in Wietmarschen. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of rack run: approx. 13.20 m - Overall height: approx. 400 cm - Arm length: approx. 120 cm (made from IPE 80) - Upright spacing (center-to-center): approx. 131 cm - Levels: base + 3 storage levels - Load capacity per arm: max. 500 kg (with evenly distributed load) - Load capacity per upright: max. 2,250 kg (with evenly distributed load) Prjdpfxsz Eqpbo Al Dsb - Upright profile: IPE 160, approx. 400 cm, incl. base section - Upright hole pitch: approx. 20 cm - First hole above base: approx. 107.5 cm (top of base) - Topmost pair of holes: approx. 50 cm below upright top (top of upright) - Design: single-sided, arms bolted - Surface: fully hot-dip galvanized - Availability: new stock SCOPE OF DELIVERY: - 11 x uprights, approx. 400 cm, made from IPE 160, incl. base, 20 cm hole grid - 33 x cantilever arms, approx. 120 cm, made from IPE 80 (without deflectors) - Includes all connecting elements - Includes all required bolts - 1 x load sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown separately. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery across Germany via our partner carrier – shipping costs depend on postal code - Professional assembly and disassembly by trained teams optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also available PLANNING & CONSULTANCY: Our planning department will gladly prepare a non-binding offer tailored to your requirements. Whether new construction, modification, or extension – we will competently advise you on your racking configuration. Not found what you’re looking for yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You will find our phone number on our company page. We are available by phone Monday to Friday, 08:00 – 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Used cantilever racking: bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, with base section 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm upright spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed Description: - Robust steel construction from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Prsdpfx Asfdkbhol Djb - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - Local pickup possible Our cantilever racking systems are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The materials are packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be level, concrete, and suitable for doweling, and must be capable of bearing the applied loads. The customer is responsible for verifying and ensuring the suitability and load capacity of the flooring, and for obtaining any necessary permits from authorities. The rack uprights must be anchored to the floor on-site; wall anchoring is not required or recommended. According to German Trade Association guidelines, it is recommended that rack uprights extend at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolt-together system in hot-dip galvanised version Scope of delivery: - 4 racking uprights, height 3,500 mm with base section 1,200 mm - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm centre distance - Incl. fixing material (excluding floor anchors) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and extensions are possible at any time) - (Large quantities available: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE sections (bolt-together system) - Surface hot-dip galvanised - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screwable cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on site possible Our cantilever racking is exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow loads. The ground must be concrete, level, suitable for dowel fixing and able to bear the acting loads. The condition and bearing capacity of the floor and any necessary official permits must be checked and ensured by the customer. Prodpfx Asfdkb Usl Deb The racking uprights must be anchored to the floor on site; anchoring to a wall is neither required nor recommended. According to trade association regulations, it is recommended that the racking uprights have at least 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, nosilnost na konzolno roko: 725 kg, nosilnost: 8.700 kg, višina police: 8.700 mm, skupna dolžina: 4.700 mm, skupna širina: 2.600 mm, skupna višina: 8.700 mm, razmak osovin: 1.500 mm, globina grla: 1.200 mm, nosilnost na odsek shranjevanja: 2.900 kg, Oprema: dvostranski, Konzolni regal v dobrem stanju Prsdpew Uf Emofx Al Djb

Stanje: rabljeno, Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING1+11, nosilnost na konzolno roko: 1.000 kg, višina police: 3.050 mm, skupna dolžina: 21.000 mm, skupna širina: 2.150 mm, skupna višina: 3.050 mm, razmak osovin: 1.900 mm, nosilnost na stojalo: 7.500 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 7.000 kg, Oprema: dvostranski, OHRA K60K - Double-sided Cantilever Rack for Long Goods / Heavy-Duty Rack Rack available 2x!!! 12 uprights - 48 cantilever arms K60K Height: 3.05 m - Uprights IPE200 - Upright spacing: 1.9 m (center to center) Total depth approx. 2.15 m (double-sided) Arms: 90 cm - IPE100 Load capacity per arm: 1000 kg Load capacity per upright: 7500 kg Including wooden inserts Very good condition, see photos Forklift available for loading Prjdpov Smk Iofx Al Djb Collection only by appointment in 75053 Gondelsheim Shipping by freight carrier possible, please inquire with your postal code

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING11, nosilnost na konzolno roko: 1.000 kg, višina police: 3.000 mm, skupna dolžina: 18.000 mm, skupna širina: 2.000 mm, skupna višina: 3.000 mm, razmak osovin: 1.500 mm, nosilnost na stojalo: 7.000 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 6.000 kg, Oprema: dvostranski, Cantilever racking, long goods rack, heavy-duty racking – double-sided Consisting of 13 uprights + 52 cantilever arms Pedpfev Smr Sox Al Djrb Height: 3m – uprights: IPE200 – upright spacing: 1.5m center-to-center Total depth: 2m (double-sided) Arms: 90cm – IPE100 Load capacity per arm: 1,000 kg Load capacity per upright: 7,000 kg Arms are infinitely adjustable Includes cross beams from arm to arm, includes wooden inserts Very good condition, see pictures Forklift available for loading Collection only by appointment in 75053 Gondelsheim Shipping by freight carrier possible, please inquire with your postal code

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 2,600 mm with base, 1,000 mm - 12 cantilever arms, 1,000 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load capacity signage C4 according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site pick-up possible Our cantilever racks are exclusively manufactured in Germany. Prodpfjd Tbbdox Al Deb We offer reliable freight forwarding with advance notice prior to delivery. Material is packed sensibly to enable easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, suitable for anchors, and capable of bearing the imposed loads. The client is responsible for checking and ensuring the ground condition and load-bearing capacity, as well as obtaining any necessary permits if required by authorities. The rack uprights must be anchored to the floor by the client; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the rack uprights have a minimum overhang of 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolt-together system, hot-dip galvanized version Scope of supply: - 4 rack uprights, height 4,160 mm, with base section, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and expandability at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height: 4,160 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Psdpsd Tqalsfx Al Djrb - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load capacity labels C4 according to DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with prior notification before delivery. The material is packaged for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The floor must be concrete, level, and suitable for anchoring, and must be able to bear the applied loads. The floor condition and load-bearing capacity, as well as any necessary regulatory permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to health and safety regulations, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: novo, Ohra konzolni regal K60, dvostransko pocinkano, set 5 kosov, nova roba 🧰 Značilnosti izdelka • Proizvajalec: Ohra • Barva: pocinkana • Stanje: nova roba • Nosilci: 5 kosov, višina 3840 mm (IPE 200) • Noga: 5 kosov, dvostranska noga (IPE 200) • Izvedba: 30 kosov, dolžina konzole 1200 mm • Varovanje: 60 kosov, varovalni zatiči • Pritrditev: 20 kosov, Hilti betonski sidri • Nosilnost: 2.500 kg na nosilec in stran • Nosilnost konzole: 830 kg na konzolo • Razdalja med okvirji: 1500 mm 💰 Cena: 5.650 € neto, brez DDV • Popusti ob nakupu več količin: na zahtevo • Stroški dostave: po vsej Evropi, na zahtevo • Dobavni rok: na voljo takoj • Ogled in prevzem: možen kadarkoli po dogovoru Stalno imamo na zalogi več kot 5000 m tekočih paletnih regalov različnih proizvajalcev. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, specifikacijah in cenah ter do predčasne prodaje! Glejte naše splošne pogoje poslovanja, vse cene so brez DDV, iz skladišča.) Lenox Trading – vrhunska skladiščna oprema in težki regali, rabljeni in novi Opis: Iščete kvalitetne skladiščne regale za nakup? Lenox Trading je z okoli 100 zaposlenimi eden največjih trgovcev z novo in rabljeno skladiščno opremo v celotnem območju DACH (Avstrija, Nemčija, Švica). ⚡ TAKOJ DOVOLJO: • Več kot 10.000 tekočih metrov regalov takoj dostavljivih • 20.000 m² skladiščnih podestov in jeklenih podestov takoj dostavljivih • 30–50 tovornih prikolic tovora na teden za maksimalno izbiro 📦 NAŠA PONUDBA (UGODNO NAKUPOVANJE V SPLETU): Ne glede na to, ali kupujete paletni regal, težki regal, visoki regal, regal s policami, regale za gume ali regale za IBC-posode – zagotavljamo dostavo in montažo po vsej Evropi s svojo lastno ekipo! Vključno z načrtovanjem v CAD-programu, transportom, demontažo in montažo. 🏭 VRHUNSKE BLAGOVNE ZNAMKE, RABLJENE IN IZ STEČAJA / KONKURSA: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, težki regal Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Konzolni regali (Elvedi konzolni regali, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠ DRUGI STEBER POSLOVANJA: SPLETNE DRŽAVNE IN PRODAJA Pri demontaži in čiščenju ponujamo celovito rešitev: 1. Nakup po fiksni ceni: nakup trgovskega blaga, opreme in celotnih skladiščnih zalog, vključno s temeljitim čiščenjem. 2. Prodaja s provizijo: izvajanje dražb v našem imenu. Naše storitve s lastnimi zaposlenimi: katalogizacija, priprava pisarne, ogled, izročitev blaga, logistika, demontaža in temeljito čiščenje. Ne glede na to, ali ste našli nas prek težkih regalov ali iščete pocinkani težki regal / regalni sistem, zagotavljamo vam najboljše pogoje. Kontaktirajte nas za neobvezujočo ponudbo! Prsdpfozdzm Rjx Al Djb

Stanje: dober (rabljeno), Konzolni regal, regal za težke tovore, enostranski konzolni regal, paletni regal - Konzolni regal: dvostranski, višina 4000 mm - Stebri: 5x 340/150/H4000 mm / 350/300/3400 mm Predeyu Um Topfx Al Dob - Konzolne roke: 70 kosov 140/140/1500 mm - Prečne povezave: 124 kosi 60/40/1350 mm - Predaja/cena: komplet - Teža: 4100 kg

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING8+10 / 9, nosilnost na konzolno roko: 1.000 kg, višina police: 3.000 mm, skupna dolžina: 21.000 mm, skupna širina: 2.150 mm, skupna višina: 3.000 mm, razmak osovin: 1.480 mm, nosilnost na stojalo: 7.500 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 6.000 kg, Oprema: dvostranski, Ohra - double-sided cantilever racking, long goods rack, heavy-duty rack Consisting of 10 uprights + 40 cantilever arms Height: 3.05m – Uprights IPB200 (HEB200) – Upright spacing 1.48m center-to-center Total depth: 2.15m (double-sided) Arm length: 90cm – IPE100 Load capacity per arm: 1000kg Upright load capacity: 7500kg Wooden inserts can be supplied upon request. Three racks available! Prsdsv Smrxspfx Al Djb No. 8+10 – 4 racks with 4 levels each – 40 arms No. 9 – 1 rack with 6 levels – 60 arms (+ €1,000 surcharge) Very good condition, see pictures. Forklift available for loading Collection by appointment only in 75053 Gondelsheim Shipping via freight carrier possible, please inquire with ZIP code

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: MING2/3/4/5/6/7, nosilnost na konzolno roko: 1.000 kg, višina police: 3.000 mm, skupna dolžina: 21.000 mm, skupna širina: 2.150 mm, skupna višina: 3.000 mm, razmak osovin: 1.480 mm, nosilnost na stojalo: 7.500 kg, dolžina police: 21.000 mm, globina grla: 900 mm, skupna masa: 6.000 kg, Oprema: dvostranski, Ohra - Double-sided Cantilever Rack, Long Materials Rack, Heavy Duty Rack Consisting of 15 uprights + 60 cantilever arms Height: 3.05 m – Uprights IPB200 (HEB200) – Upright spacing: 1.48 m center-to-center Prjdsv Smm Nepfx Al Dsb Total depth: 2.15 m (double-sided) Arms: 90 cm – IPE100 Load capacity per arm: 1,000 kg Load capacity per upright: 7,500 kg Wooden inserts can be supplied on request. 6 racks available!!!! 4 with 4 levels – 60 arms each 2 with 6 levels – 90 arms each (+2,000€ surcharge) Very good condition, see pictures. Forklift available for loading. Collection by appointment only in 75053 Gondelsheim. Shipping via freight carrier possible, please inquire with your postcode.