Stroji za brušenje navojev nakup rabljenega (8)

Stanje: rabljeno, Leto izdelave: 1979, Maximum pipe diameter: 50 mm No accessories included Kdedpfx Afsucgu Aj Teg Pipe cutter/separator: yes

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Različni stroji za brušenje navojev se prodajajo v paketu. Stroji so skladiščeni suhi in so primerni kot donorji rezervnih delov ali kot rezervni stroji. Strojev ni možno prikazati pod napetostjo. Kjdpfx Ajx Rt Hrjf Tedg Demontaža in nakladanje sta strošek kupca. Viličarja za nakladanje strojev ni na voljo, lahko pa ga organiziramo. 104 Stroj za brušenje navojev RAG REISHAUER 105 Stroj za brušenje navojev RAG REISHAUER 106/117 Stroj za brušenje navojev US REISHAUER 107 Stroj za brušenje navojev US REISHAUER

Stanje: rabljeno, Leto izdelave: 2015, Thread diameter: 20 - 80 mm Grinding length: 3500 mm Thread pitch: . mm Min./max. thread length: 50 / 3500 mm Centre height: 400 mm Max. workpiece length: 4000 mm Control: Siemens 840-Dsl Feed rate U-axis: 0 - 2500 mm/min Feed rate W-axis: 0 - 2500 mm/min Feed rate B-axis: 100 rpm Total power requirement: 45 kW Machine weight: approx. 24 t Space requirement: approx. 10.7 x 4.6 x 2.9 m Kedjw Ed S Uepfx Af Tsdg Thread grinding machine / profile grinding machine, suitable for: - Thread grinding of single- and multi-start ball screw spindles with Gothic profiles and special profiles - Diameters from 20 to 80 mm with a grinding wheel diameter of 350 to 500 mm - Max. centre distance up to 4000 mm Equipment / Accessories: - Grinding spindle: - Power: 14 kW - For grinding wheel diameters from 350 to 500 mm, cutting speeds from 20 to 75 m/s are adjustable. - Grinding wheels: - New diameter: 500 mm - Worn diameter: 350 mm - Bore diameter: 203.2 mm - Diamond form roll: - Diameter: 121.3 mm - Radius: 0.5 mm - Driver flange for workpiece diameters: 15-70 mm - Drivers: - For workpiece driving diameters: 10-32 mm - For workpiece driving diameters: 31-60 mm - For workpiece driving diameters: 60-105 mm

Stanje: rabljeno, Leto izdelave: 1986, Workpiece diameter 460 mm Thread length 900 mm Thread pitch 100 mm Total power requirement 10 kW Machine weight approx. 8 t Space requirement approx. m R E I S H A U E R (Switzerland) Universal - extra large - thread and worm grinding machine Model ULG 46 Year 1986 _____ ___ Grinding length: 900 mm Maximum workpiece clamping length: 1,190 / 1,400 mm Workpiece Ø / thread Ø, min./max.: 10 – 460 mm (!) Longitudinal adjustment of workhead on table: 210 mm Maximum workpiece weight approx.: 100 kg Work spindle bore approx.: 65 mm Lead range for single-rib wheels: 0.3 – 100 mm Maximum module: 10 Maximum lead angle: +/- 40° Grinding wheel dimensions, Ø x width: 350 x 20/40 mm Kdsdot H Smtepfx Af Tjg Relief grinding size: 0.03 – 8 mm Presettable number of flutes: 2 – 10, 12, 14, and 16 27 workpiece speeds: 0.4 – 160 rpm Infinitely variable grinding wheel speeds: 72 – 2,500 rpm Spindle drive approx. 10 kW * Total connected load approx. 25 kW - 400 V - 50 Hz Weight approx. 8,000 kg Accessories / Special Features: • Machine was originally built with an increased center height for a maximum workpiece swing of 460 mm, allowing thread machining on larger workpieces and housings (aircraft industry)! • Internal thread grinding device with two dressing devices (long and short spindles) • Various flanges with grinding wheels • USL 3200 dressing device for pressure roll profiling, mounted above the grinding wheel (not motorized) • USL 700 dressing device for manual profiling of single-ribbed grinding wheel flanks • Automatic plunge-cut device. Automatic lift-off of grinding slide for the return of the workpiece slide • Relief grinding device with several cams, also suitable for plunge grinding • Hydraulic tailstock with foot switch and expansion compensation • Two simple dressing devices, manually operated for straight profiling • Two 3-point steadies for heavy workpiece support • Various flanges, set of change gears, numerous coolant nozzles, setting gauge, 3 faceplates up to 500 mm diameter, separate electrical cabinet for adjusting various grinding cycles • Lift-off safety hood above the working area, monitored by limit switches, etc. No coolant device available, but connection to a central coolant supply with valve control as well as a separate coolant chiller and standalone dust extraction unit.

Stanje: rabljeno, Leto izdelave: 1985, Thread diameter 254 mm Grinding length 350 mm Thread pitch 51 mm Control SIEMENS S 8 Total power requirement 12 kW Kodpfot Hw U Ajx Af Tjdg Machine weight approx. 5000 kg Space requirement approx. m Internal thread grinding machine with PLC control

Stanje: dober (rabljeno), Leto izdelave: 2007, Premer obdelovanca 1400 mm Premer izvrtine 100–500 mm Krmiljenje Sinumerik 840D Kdjdowzmqrjpfx Af Teg

Stanje: zelo dobro (rabljeno), Thread diameter: 5 - 200 mm Kjdpfxewvl H Us Af Todg Grinding length: 500 mm Thread pitch: 0.25 - 6 mm Clamping length max.: 850 mm Grinding wheel diameter: 350 mm Centre height: 105 mm Thread M2 - M149 Thread - inch: 3/32 - 4'' Swivel angle left/right: +/-10° Total power requirement: 6 kW Machine weight approx.: 3.2 t Space requirements approx.: 2.5 x 1.7 x 1.5 m

Stanje: nepreverjeno (rabljeno), Weight: approx. 4,500 kg Kdsdswv N Ehspfx Af Teg