Stroji za valjanje navojev nakup rabljenega (43)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, For sale are two excellently maintained thread rolling machines from a German mechanical engineering company. The systems are enclosed and both are networked with KUKA automation (robot), but can of course also be used as standalone machines. The complete photo collection is available upon request. Basic Data Designation: P15 CNC Thread Rolling Machine Manufacturer: PEE-WEE Inventory No.: P10.0014 Factory No.: P10.0014 Year of Manufacture: 2010 Delivery Date: (not completed/not legible in the image) Adjustment Ranges / Performance Rolling pressure, infinitely adjustable: 1,000 – 15,000 Feed rate, infinitely adjustable: 0.5 – 6 mm/s Rolling time, infinitely adjustable: 0.15 – 30 s Pause time, infinitely adjustable: 0.15 – 30 s Rolling Spindles / Tools / Geometry Spindle diameter: 54.0 mm Spindle mounting length: 170 mm Keyway width in spindle: 12.0 mm Keyway height above spindle: 2.5 mm Min. distance between spindles: 130 mm Max. distance between spindles: 230 mm Stroke of spindle slide: 100 mm Max. diameter of rolling tools: * 200 mm Min. diameter of rolling tools: * 130 mm Machine bed height: 800 mm Spindle center height above bed: 160 mm Height of support bearing: 110 mm Spindle speeds: 20 – 80 rpm * Note from data sheet: “Indicated value may vary” (e.g., depending on fixture setup/workpiece diameter). Identification / Workpiece Data Min. rollable workpiece diameter: * 2 mm Max. rollable workpiece diameter: * 50 mm Max. thread length, infeed: 170.0 mm Max. thread length, through-feed: 2,000 mm Max. thread pitch: 4 mm Max. pitch for serrated profiles: 1.5 mm Material strength (note): up to 70 kg/mm² (according to data sheet) Dimensions / Weight / Floor Loading Required floor space: approx. 1,500 × 1,200 mm Machine height: 2,800 mm Machine weight: 2,800 kg Ceiling/floor load: approx. 1,560 kg/m² Electrical / Power Supply Mains connection: Three-phase Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Hnjdpfx Aex Tnq Dof Tsg Total power consumption: 16 kW Motors (from table) Rolling spindle drive motor Manufacturer: Weg Lenze Type: 3N132M-6 Power: 5.5 kW Speed: 860 rpm Voltage: 400 V, Frequency: 50 Hz Coolant pump with motor Manufacturer: Brinkmann Type: TB40/220+001 Power: 0.12 kW Speed: 2,700 rpm Voltage: 400 V, Frequency: 50 Hz Pressure pump motor Manufacturer: MEZ Type: 7AA132MM4 (as legible) Power: 7.5 kW Speed: 1,455 rpm Voltage: 400 V, Frequency: 50 Hz

Stanje: rabljeno, Leto izdelave: 1997, Tehnične podrobnosti: Pritisk: 10 t Premer obdelovanca - maks.: 50 mm Dolžina navoja: 100 mm Največji valjčni korak: 3 mm Valjalna sila: 100 kN Premer obdelovanca min/maks: 117/175 mm Hitrost vrtenja: 0 - 150 obr/min Približna masa stroja: 2550 t Dimenzije stroja: 1,25 x 1,38 x 2,15 m Hedpfx Afox Iu Ifs Teng

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, NAPRODAJ Hnjdpexv Dcxsfx Af Tjg stroji za valjanje navojev Escofier H20Z

Stanje: rabljeno, Leto izdelave: 2007, Tlak 20 - 300 kN Pomik valjčnega vozička 50 mm Premer valjčne vretena 120 mm Višina valjčne vretena nad ležiščem stroja 200 mm Krmiljenje SIN 840 D Dolžina nastavka valjčne vretena 200 mm Hitrost vrtenja valjčne vretena 0 - 50 min⁻¹ Navor na valjčno vreteno 2700 Nm Pogonska moč 2 x 8,4 kW Razdalja med valjčnimi vreteni min. 271 / maks. 368 mm Največji zunanji premer valjčnega orodja 300 mm Skupna potrebna moč 26 kW Teža stroja cca. 7,1 t Dimenzije cca. 9,70 x 4,50 x 3,80 m CNC stroj za valjanje zobnikov / navojno valjanje Postopek valjanja hidravličen Felsomat merilna celica Popolna ohišje Hsdpfxsw E Nmks Af Tsng

Stanje: rabljeno, Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Shaft diameter: 69.95 mm See video Hsdpfx Ast Apugsf Tong The machine is located in our warehouse in Gussago (BS), powered on Test run possible Mimu Werkzeugmaschinen Rolling is a mechanical process without chip removal, which can be performed either cold or hot, aimed at improving the surface finish (and consequently the fatigue performance).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Rolldruck Stufenlos regelbar von 117 kN Vorschub - Feinverstellung 0,5-45 mm/min Drehzahl 0-80 U/min Schwenkwinkel der Rollköpfe 11 ° Durchmesser der Rollspindeln 69,85 mm Hub - Rollspindelschlitten 0-150 mm min. Abstand - Rollspindeln 138 mm max. Abstand - Rollspindeln 285 mm Hedpexukrqsfx Af Tjng min. Durchmesser - Rollwerkzeuge 230 mm max. Durchmesser - Rollwerkzeuge 135 mm kleinster Durchmesser 2 mm größter Durchmesser 55 mm Gewindelänge im Einstechverfahren 200 mm Gewindelänge im Durchlaufverfahren 2000 mm größte Steigung d. Gewindes 4 mm Gesamtleistungsbedarf 14 kW Maschinengewicht ca. 2,4 t Raumbedarf ca. 2,0 x 2,5 x 1,9 m Rollzeit stufenlos einstellbar von: 0,1s Pausenzeit stufenlos einstellbar von: 0,1s Aufnahmelänge der Rollspindeln: 200mm Maschinenbetthöhe: 810mm Rollspindelhöhe über Maschinenbett: 200mm Höhe der Stützlager: 115mm Größte Teilung bei Kerbverzahnung: 2,5mm -(bis 70kg/mm2 Festigkeit d. Werkstoffes)

Stanje: dober (rabljeno), Leto izdelave: 1998, dolžina navoja: 65 mm, Maksimalni pritisk: 10T Maksimalni premer obdelovanca: 30Ø Minimalni premer obdelovanca: 2Ø Minimalna dolžina reza: 2mm Maksimalna dolžina reza: 65mm Korak / vodilo: 30mm Premer osi: 85 - 135mm Dolžina: 1600mm Širina: 1400mm Višina: 1800mm Teža: 2300kg Prosimo, upoštevajte: Podatki na tej strani so bili po najboljših močeh pridobljeni s strani nas in, kjer je mogoče, od proizvajalca. Informacije so podane v dobri veri, vendar natančnost ni zagotovljena. V skladu s tem ne predstavljajo nobene zaveze ali pogodbenih pogojev. Priporočamo, da preverite vse ključne podatke. Hedpfx Afsx H Rmuj Tsng

Stanje: rabljeno, Leto izdelave: 2007, Brand: ORT Model: RP18 Year: 2007 Maximum rolling force: 18 Ton Roller shaft diameter: 54 mm Roller shaft key size: 12 mm Minimum workpiece diameter: 3 mm Maximum workpiece diameter: 60 mm Maximum plunging workpiece length: 175 mm Maximum through-feed workpiece length: — Maximum pitch: 4 mm Hnodpfev Tqdbsx Af Tjg Minimum roller diameter: 140 mm Maximum roller diameter: 185 mm Main motor power: 7.5 HP Total installed power: 11 HP Maximum noise level: 80 dB Net weight: 1,800 kg Rolling shaft height from floor: 1,035 mm Machine width: 1,450 mm Standard machine depth: 900 mm Total machine height: 1,800 mm

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Pressing force: 10 t Maximum workpiece diameter: 40 mm Thread length: 70–80 mm Workpiece diameter min/max: 3 / 40 mm Rotational speed: 47–94 rpm Feed rate: 0.5 – 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions (W x D x H): 1.4 x 1.4 x 1.7 m Hedpfjw D Aq Tex Af Tong Hydraulics dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Adjustable roller speed Maximum thread diameter: 40 mm; Minimum thread diameter: 3 mm Up to max. pitch: 3.5 mm; Max. pitch: 1.75 mm Roll width min.: 80 mm; max.: 120 mm Spindle speed: 47–94 rpm Roller spindle diameter: 40 mm Various rollers as accessories

Stanje: rabljeno, TEHNIČNI PODATKI - Min./maks. premer obdelovancev: 2 / 18 [mm] - Maks. navoj: 2 [mm] - Maks. dolžina pri potapljanju: 40 [mm] - Sila: 6 [t] - Min./maks. premer valjev: 70 / 100 [mm] - Standardni hod odmikača: 5 [mm] Hjdexbt Izepfx Af Tjng TEŽA IN DIMENZIJE - Potrebna površina: 775 x 555 [mm] - Višina stroja: 1100 [mm] - Teža stroja: 650 [kg]

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2009, ORT RP30 MS 2 Rollers 30 Ton Thread Rolling, Knurling, Small Gears Year of manufacture: 2009 Electronics overhaul and retrofit with Siemens PLC (2025) The machine is powered and available for inspection at our warehouse in Gussago (BS). Test run is possible. M i m u Machine Tools Rolling is a mechanical process without material removal, which can be performed cold or hot, aimed at improving surface finish (thus enhancing fatigue strength). Capacity (tonnes): 30 Hodpfsuykz Dsx Af Teng Number of rolls: 2

Stanje: rabljeno, 2 rabljeni stroji za valjanje navojev WMW UPW25 Hodpfx Asx Dmnysf Tjng ---Samo 10.000,00 EUR---

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, BAD DUBEN Modello PRX 32 E - CNC Usato - in ottime condizioni Rullatrice per filettatura cilindrica a 2 rulli Marca: BAD DUBEN Modello: PRX 32 E - CNC Tipologia: Macchina filettatrice, rullatrice per filettatura, a matrici cilindriche Condizioni: Usato, in buone condizioni Numero di serie: 17 Hodpfx Afjv Imqyo Tsng Anno: 1995 Pressione massima di rullatura: 16 T Diametro pezzo: 6 - 24 mm Lunghezza filettabile: 200 mm Diametro rulli: 195 mm Passo massimo filettabile: 3 mm Range velocità mandrino rulli: 40-315 giri/min Diametro matrice: 210 mm Peso: 4.500 kg Visibile presso H.B.R. srl - Calolziocorte (LC) - Italia

Stanje: dober (rabljeno), Maximum pressure 25 tons Hedpfogqumpsx Af Tong • Shafts of 69 and 85 mm • Machine in very good condition, fully serviced

Stanje: rabljeno, Leto izdelave: 1991, Workpiece diameter: 30 mm Thread length: 110 mm Thread pitch: 0.5–2.75 mm/lead Total power requirement: 4.5 kW Machine weight: approx. 1.7 t Hnodpfx Afst Hwzco Tjg Space requirement: approx. m MONNIER & ZAHNER Switzerland Thread Whirling Machine with Workpiece Loading Device Type MZ 600, Year of manufacture approx. 1991, #3591 Max. workpiece diameter: approx. 30 mm Max. workpiece length: approx. 110 mm Axial milling length: approx. 100 mm Module in steel: approx. 1 Starts: 1 Minimum/maximum centre distance tool–workpiece: 0 - 70 mm Whirling head swiveling: +/-12° Tool size approx.: 70 x 16 mm Whirling head speeds approx.: 1,000–6,000 rpm Pitch range approx.: 0.5–2.75 mm/lead Whirling head drive: approx. 1.5 kW Total drive approx.: 4.5 kW – 220 V/380 V / 50 Hz Weight: approx. 1,700 kg Accessories / Special Equipment: Machine designed for the production of medical screws. Equipped with an automatic workpiece feeder via a Rübenach vibratory bowl with pneumatic swing gripper for insertion of blanks, as well as with counter-center (inserter) and ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as both a longitudinal and a cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew, and the cross slide determines the thread depth. Copying device at the end of the cross slide with template holder for conical screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electric program control with display of motion sequence. Fault indicator, workpiece counter, oil mist extraction, coolant system, etc.

Stanje: rabljeno, TEHNIČNI PODATKI - Min./maks. premer obdelovancev: 2 / 40 [mm] - Največji navojni korak: 5 [mm] - Največja dolžina pri potopitvi: 54 [mm] - Moč: 12 [t] Hnjdpfsxbt Iuox Af Teg TEŽA IN MERE - Potrebni prostor: 2000 x 1750 [mm] - Teža stroja: 2100 [kg]

Stanje: generalkompletno obnovljen (rabljeno), CNC stroj za valjanje navojev - stroj za valjanje navojev - elektronski retrofit s Siemens PLC-jem in zaslonom na dotik Thommen PR17 CNC, 2-valjni. Hitrost rotacije valjev je elektronsko nadzorovana. Položaj in hitrost sta elektronsko upravljana. Premer vretena je 54 mm. 2 para podpor (zaprte in odprte). Stroj je na naši zalogi v Gussagu BS, priključen na elektriko. Možen je preizkus delovanja. Mimu Werkzeugmaschinen. Valjanje navojev je mehanski proces brez odvajanja odrezkov, ki se lahko izvaja hladno ali toplo, namenjen izboljšanju površinske kakovosti (in s tem utrujnostnih lastnosti). Hsdpfxeilh Tio Af Teng

Stanje: dober (rabljeno), Leto izdelave: 1973, Pressure: 0.5 - 10 t Workpiece diameter: max. 2 - 50 mm Hjdpovpaakjfx Af Tjng Thread length: 2000 mm Pitch: 3 mm Roll spindle mounting diameter: 54 mm Tool diameter: 145 mm Roll spindle speeds: 41 - 129 rpm Stroke: 0 - 8 mm Total power requirement: 4.5 kW Machine weight: approx. 1.3 t Space required: approx. 1.3 x 1.2 x 1.2 m Including loading device.

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Hedpfxet Hw N Tj Af Tjng Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: rabljeno, Thread rolling machine - ORT RP18 2-roll thread rolling machine Swiveling spindle Overhauled with Siemens PLC Hnjdsuua H Rspfx Af Teg See video The machine is powered and available in our warehouse Test run possible

Stanje: generalkompletno obnovljen (rabljeno), Thread rolling machine - Thread rolling machine ORT RP18 2-roll Hedpovxa Dbofx Af Teng Refurbished - new Siemens PLC See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Werkzeugmaschinen Rolling is a mechanical process without chip removal that can be performed cold or hot, with the purpose of improving surface finish (and thereby fatigue performance).

Stanje: rabljeno, Leto izdelave: 2003, Thread Rolling Machine Description: Rolling force: 2-20 tons Workpiece diameter: max. 75 mm Tool diameter: 140-200 mm Inclination: +/-6° Shaft diameter: 69.95 mm Manufacturer: ESCOFIER Model: H20Z Hnedpfot Hmv Nsx Af Tjg Year of manufacture: 2003 Under power in our warehouse M i M u Machine Tools (Italy)

Stanje: rabljeno, Stroj za valjanje navojev ORT RP30U 2-valjna 30 ton Zasukljive glave Inverter #1331 Stroj si lahko ogledate v delovanju v našem skladišču v Gussago BS. Možnost demonstracije M i m u Stroji za valjanje navojev so mehanski postopki brez odrezavanja, ki se lahko izvajajo hladno ali vroče, z namenom izboljšanja površinske kakovosti (torej tudi izboljšanja utrujenostnih lastnosti). Moč (tona): 30 Hodpfot H Ty Uex Af Tong Število valjev: 2

Stanje: generalkompletno obnovljen (rabljeno), Thread Rolling Machine - Thread Roller ORT RP18 2-Roll Hnjdpjwwmiysfx Af Tjg Under Power, See Video LOW PRICE - Special Offer The machine is located in our warehouse in Gussago BS, under power Test run possible. Mimu Machine Tools Thread rolling is a mechanical, chipless process that can be performed cold or hot, aiming to improve surface finish (and thus fatigue strength).

Stanje: rabljeno, Leto izdelave: 2004, CNC thread rolling machine, gear lapping machine Description: Rolling force: 100–4000 daN, speed: 100–180 rpm, max. workpiece diameter: 100 mm, tool holder diameter: 76.2 mm, tool diameter: 180–245 mm, rolling axis height: 135 mm, center distance: 212–364 mm, inclination: +/-6°, feed speed: 0.1–20 mm/s, return speed: 0.1–30 mm/s, motor power: 8.6 kW, connected load: 16.8 kVA, length: 4250 mm, width: 3860 mm, height: 2600 mm, weight: 5.8 t. Manufacturer: ESCOFIER Hnjdpjt Ek Sfefx Af Tog Model: P440 CN Power: 8.6 kW Year of manufacture: 2004 Under power in our warehouse Mimu Machine Tools (Italy)