Brezsrediščni

SENY R-60 H

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 800 kW (1.087,70 KM), skupna masa: 4.500 kg, Oprema: kompresor, zamrzovalnik, Chiller Trane RTUB224 Cooling capacity: 800 kW Number of refrigeration circuits: 1 Refrigerant type: R134A Voltage: 400 V Absorbed power: 176 kW Year of manufacture: 2009 Including dry coolers: 1x Güntner GWH 090.1D/5-M PT: 30.8 bar Predpfsrzq Arjx Anpoc PS: 28 bar The specified cooling capacity is based on a water outlet temperature of +7°C and a condensing temperature of +40°C.

Stanje: rabljeno, Leto izdelave: 1961, Premer obdelovanca - maks. 100 mm Prsdpfx Aewwl I Isnpec Premer obdelovanca - min. 10 mm Dolžina obdelovanca 1000 mm Skupna potrebna moč 16 kW Teža stroja cca 3 t Potrebni prostor cca 0 m Vodila so bila obnovljena pred 10 leti.

Stanje: rabljeno, Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D12E/8177, Številka ponudbe: D12E/8177 Vrsta stroja: Stiskalnica za žične žeblje Proizvajalec: WAFIOS Tip: N61 Leto izdelave: 1986 Premer žice: 3,1–5,2 mm Dolžine žebljev: 13–150 mm Pedpfewi Tk Iox Anpjrc Kapaciteta – kosov/min: 370 Lokacija: V Evropi

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), vrsta hlajenja: zrak, Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Predovllxdjpfx Anpec Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: generalkompletno obnovljen (rabljeno), Centerless cylindrical grinding machine MONZESI ROSSI MONZA 1500 (currently being overhauled and fully electrically/electronically retrofitted) Siemens electronics with touchscreen, brushless motor for the Z-axis (workpiece diameter) and regulating wheel (variable RPM), stepper motor for grinding wheel dressing increments, automatic size compensation after dressing the grinding wheel Grinding wheel: 350 mm diameter x 610 mm width Podpfx Anemmqiropsrc This machine can be inspected at our warehouse in Gussago (BS), Italy. Plunge Grinding With the plunge grinding process, workpieces with stepped or profiled external surfaces—such as nozzle needles, valves, journal crosses, gearbox and electric motor shafts—are machined. Available technologies include straight or angled plunge grinding, plunge grinding for single or multiple workpieces, plunge grinding in several operations (simultaneously or sequentially), and oscillating plunge grinding. Through-feed grinding is used for machining unprofiled workpieces, such as cylindrical and tapered rollers, rings, rods, and hydraulic slide valves. This grinding process is highly productive and mainly used for series and mass production of precision components.

Stanje: dober (rabljeno), Leto izdelave: 1997, Also available: CONQUEST T51 model The used HARDINGE CONQUEST T42L 3-axis CNC lathe is a robust and precise medium-sized slant bed CNC lathe with an approximate turning length of 700mm, a bar capacity of 42mm, and a 12-position automatic turret with live tooling. It features a FANUC 18-T CNC control with a color LCD screen and an RS232 serial interface for data transfer. ASA 5″ spindle Max speed: 4,200 rpm Podpfxjvtrc So Anperc Continuous C axis Spindle power: 20HP X-axis travel: 172mm Z-axis travel: 575mm Machine weight: 4,000 kg The machine comes complete with a 210mm AUTOBLOCK hydraulic chuck, tool presetting system, programmable tailstock, 2 live tool holders (1 axial and 1 radial), chip conveyor, a set of fixed and manual tool holders, and backup disk. Year of manufacture: 1997. CE compliant and in excellent condition.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, SRF Master Illustration on the left 2 m extraction arm Application area Low levels of fume/dust Occasional use Benefits Minimal repositioning of the extraction hood required Greater flexibility thanks to additional hose connection at the rear Features Safe operation with filter monitoring Extraction hood can rotate and swivel 360 degrees Push handle and cable holder Process 3-stage Prodpedqzbrefx Anpjc Filter type Disposable filter Filter surface approx. 12 m² Separation efficiency > 99% Filter material Fiberglass fleece Welding fume separation class W3 Additional filters Two pre-filters Basic data Extraction capacity max. 950 m³/h Diameter of extraction arm Ø 150 mm Length of extraction arm 2 m Diameter of suction connection Ø 150 mm Power supply 230 V / 50Hz Motor power 1.1 kW Sound pressure level 72 dB(A) Dimensions (W x D x H) 705 x 655 x 900 mm Weight approx. 71 kg

Stanje: potreben popravila (rabljeno), Leto izdelave: 1983, Funkcionalnost: omejena funkcionalnost, skupna višina: 2.650 mm, skupna širina: 3.640 mm, skupna dolžina: 4.620 mm, skupna masa: 6.800 kg, Tehnični podatki: Pomik po osi X: 1000 mm Pomik po osi Y: 560 mm Pomik po osi Z: 800 mm Hitri pomik: 6 m/min Delovni pomik: 1–400 mm/min Ločljivost rotacijske osi (stopinje): 0,001 Krmilna enota: Philips 432 Število vrtljajev vretena: 20–2000 vrt/min Hod vretena: 125 mm Stožec vretena: ISO 50 Moč vretena: 15 kW Pomikalna sila osi X in Z: 8000 N Pomikalna sila osi X in Z: 24000 N Podpfxjunwd Tj Anporc Velikost mize: 1250 x 800 mm Nosilnost mize: 800 kg Programska ločljivost: 0,001 mm Dokumentacija za stroj Opomba: Elektronska kartica je v okvari in jo je treba zamenjati. Stroj je mehansko v odličnem stanju in ga je mogoče enostavno nadgraditi z modernimi CNC krmilji.

Stanje: rabljeno, Leto izdelave: 2005, No. 3256 CNC Automatic Pallet Manufacturing Machine Sysmathick RPA9 + Stacker Used, year of manufacture 2005, system already dismantled System for the assembly of wooden parts with top and bottom nailing The RPA9 is a machine with circulating chains for the production of pallets in standard sizes according to four templates (maximum 1600 x 1400 mm LxW) Operation via touchscreen Format change in a matter of minutes Two programming methods: - Digital programming via PC (input of coordinates) - Manual programming via touchscreen Storage of tens of thousands of products Automatic adjustment of the spacing between the heads (minimum 290 mm) Positioning accuracy +/- 1 mm High adjustment speed (1 m/s) Bridge with nine nailers (top: 3x N58 & 3x N400, bottom: 3x N80) High nailing frequency (one row with three nails per second) Nailing of multi-level pallets thanks to heads equipped with pneumatic cylinders Pneumatic clamping of boards during assembly Minimum pallet size: 600 x 300 mm LxW Maximum pallet size: 1600 x 1400 mm LxW Maximum template size: 1700 x 1600 mm LxW Maximum nailing capacity: 1600 x 1400 mm LxW Maximum pallet height: 190 mm Minimum pallet height: 110 mm Machine throughput: 60 – 200 pallets/hour Sale on behalf of a customer, ex location near 51371 Leverkusen, without dismantling, transport, or installation Dismantling, loading, and transport by us are optionally possible Subject to errors in description and price Prjdpex Dddxjfx Anpoc To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sale as is Technical specifications, condition description, year of manufacture, and scope of delivery based on manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty for used machines; sold as inspected Pictures and videos are for reference only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex site

Stanje: rabljeno, Leto izdelave: 1970, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D12L/8373, Številka ponudbe: D12L/8373 Vrsta stroja: Stiskalnica za žične zatiče Proizvajalec: WAFIOS Tip: S110 Leto izdelave: 1970 Podswi Ubnopfx Anpjrc Premer obdelovanca: 2,2–3,8 mm Dolžina zatičev: 13–110 mm Zmogljivost - kos/min: 350 Lokacija: pri nas na zalogi