ORT 3RP10

ORT 3RP10

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Dolžina mize 175 mm Širina mize 110 mm Premer brusnega kolesa 500 mm Fodpfsxvdr Tox Ahmsph Skupna potrebna moč 1 kW Teža stroja cca 1,5 t

Stanje: zelo dobro (rabljeno), Horizontalni odvalovalni stroj za izdelavo zobnikov Proizvajalec: WMW HECKERT Model: ZFWVG 250x2000 VEB Fritz Heckert ZFWVG 250×2000 Maksimalna dolžina obdelovanca: 2.000 mm Maksimalni premer obdelovanca: 250 mm Oprema: drugi rezkalni glavi, odvalovalni rezkarji v različnih modulih, Fsdpjyr S Upofx Ahmjph podporna ležišča, vpenjalna sredstva itd.

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 550-235-ELD, GENERAL CHARACTERISTICS Fedpfxjd Nw Tte Ahmsph Max. rolling diameter: 41 mm Max./Min. module range: 1.5 / 0.39 Max. rolling width: 92 mm Max. stroke of the tool holder slide: 760 mm Max. rack length: 610 mm Max./Min. diametral pitch: 20/40-32/64 Serial Number: 550-235-ELD ELECTRICAL CHARACTERISTICS Main motor power: 15 HP

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Fedpfx Ahst Hw N Temjph Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: dober (rabljeno), Flat-die thread rolling machine, thread rolling machine, segmented thread rolling machine, cold forming machine, knurling machine, thread rolling machine - Manufacturer: EWM, flat-die thread rolling and knurling machine - Type: unfortunately without type designation - Drive: 4.6/5.8 kW, 1435/2890 rpm - Belt drive: adjustable in 3 steps - Knurling die: RAA 1.0 - Central lubrication - Dimensions: 1680/920/H1440 mm Fsdpoi Eg Nkefx Ahmjph - Weight: 1308 kg

Leto izdelave: 1960, stanje: generalkompletno obnovljen (rabljeno), številka stroja/vozila: 1733, Vertical internal broaching machine with indexing table by Karl Klink Model: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Weight: 4.9 t Broaching force: 10,000 kg Equipped with indexing table (2 stations) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7.5 kW Fpedpogyd S Sofx Ahmoh The machine has been completely overhauled and is therefore in very good condition.

Stanje: rabljeno, One set each of thread rolling dies with 63 mm bore M 12x1.5 M 16x1.5 M 18x1.5 M 20x1.5 M 22x1.5 Fpodpscn Tb Eofx Ahmsh M 10x1 Diameter: 160 mm Roll widths vary: 60, 70, 80 mm

Stanje: zelo dobro (rabljeno), Pressure: 50 t Throat depth: 245 mm Stroke: 14 / 90 mm Ram adjustment: 75 mm Table height adjustment: 150 mm Strokes per minute: 42/85 Table surface: 700 x 490 mm Ram surface: 400 x 230 mm Ram pin bore: 40 mm Table through-hole: 240 x 140 mm Installation height (max. stroke up, ram adj. up): 360 mm Total power requirement: 4 kW Machine weight: approx. 3.41 t Space requirement: approx. 0.8 x 1.75 x 2.1 m Machine has been partially overhauled in-house as follows: Fpjdpetrhf Ajfx Ahmsh - Disassembly, cleaning, and inspection - Table refaced - Machine repainted in light grey / gentian blue, ram assembly in orange - Shaft crack inspection performed - Ortlinghaus KBK + additional brake disassembled, cleaned, tested, seals replaced - Additional air reservoir - New control cabinet with safety control and touchscreen display - New machine wiring - New Vogel central lubrication system with pipework (formerly manual lubrication points) - New Herion press safety valve + maintenance unit - New Balluff cam switchgear - New two-hand control panel - New foot switch - Current DGUV safety inspection with brake time measurement - Machine made safe for manual infeed operations

Stanje: rabljeno, Leto izdelave: 1991, Tlačna moč 1.500 kN Nastavljiv hod 20 - 132 mm Nastavitev batnice maks. 90 mm Število hodov 50 / 75 1/min. Dodatni podatki in slike na zahtevo Rabljena, stiskalnica je bila popolnoma razstavljena Fodpfxjrm Nqmj Ahmoph Ni delujoča in zahteva mehansko ter električno obnovo Stiskalnica je trenutno mehansko ponovno sestavljena

Leto izdelave: 1991, stanje: pripravljen za uporabo (rabljen), Keyway width range: 2mm–32mm, max. ram stroke: 300mm, strokes per minute: 300, max. installation height: 450mm, feed: 0.01mm–0.15mm, working speed: 30m/min, return speed: 30m/min, machine dimensions (L/W/H): approx. 2500mm/1500mm/2200mm, weight: approx. 2200kg, control system: fk electronic Dialog CNC. On-site inspection possible. Fedpfx Ahju D Aagsmsph