Stroj za valjanje navojev

PROFIROLL BAD DUEBEN ROLLEX

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Bedpfx Afst Hw N Tonjld Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: zelo dobro (rabljeno), Pressure: 0.5 - 20 t Workpiece diameter: max. 5 - 75 mm Thread length: 2000 mm Pitch: 8 mm Blodjvpaa Rspfx Afnjd Roll spindle mount diameter: 69.85 mm Tool diameter: 200 mm Roll spindle speed: 20 - 90 rpm Stroke: 0 - 20 mm Total power requirement: 7.5 kW Machine weight: approx. 3.1 t Space requirement: approx. 1.9 x 1.1 x 1.2 m

Leto izdelave: 2012, Stanje: dober (rabljeno), Muratec MW120 GT naprodaj Rabljeno, v odličnem stanju. Ogled stroja je možen po dogovoru. Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Dobava: EXW Székesfehérvár Blodpfx Afoifi D Tjnod

Stanje: zelo dobro (rabljeno), The fully hydraulic high-speed production band saw is equipped with a universal hydraulic system for exclusive or alternating cutting of thin- and thick-walled profiles as well as solid materials, all without changing the saw blade, thanks to a uniform tooth pitch of 3 or 4 teeth per inch. The machine features a pre-tensioned saw frame guide, enclosed oil hydraulics, triple swivel bearing, separate coolant system, steplessly adjustable hydraulic cutting pressure, lifting movement and accelerated return stroke, and is standard-fitted with a stepless mitre setting device. The saw frame can be lifted in rapid traverse mode. A pivoting vice ensures optimum utilization of the saw blade. Longitudinal guidance with ground and hardened guide rails transfers the cutting forces to the saw frame. Automatic end stop. Push-button control for ON/OFF functions and rapid traverse of the saw frame. Manufacturer: KASTO Type: PSB 280 U Drive power: 2.2 kW Stroke frequencies: 40/51/64/80/102/128 strokes/min Cutting speed: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: hydraulic Cutting range round: 280 mm yCutting range flat: 280 x 150 mm Bjdpfx Ajxdwbksfnold Mitre range: 0-45° Material support height: 600 mm Weight: 650 kg Length/width: 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: coolant system, rapid lowering, rapid lifting

Stanje: rabljeno, Thread Rolling Machine - Thread Rolling Machine ORT RP18 2-Roll Bedpjt Apugsfx Afnjld Shaft diameter: 69.95 mm See video The machine is located in our warehouse in Gussago (BS), powered on Test run possible Mimu Werkzeugmaschinen Rolling is a mechanical process without chip removal, which can be performed either cold or hot, aimed at improving the surface finish (and consequently the fatigue performance).

Stanje: rabljeno, Leto izdelave: 2007, Število obratov 8000 min-1 Teža 5500 kg Bodpewm Rqaefx Afnold Leto izdelave 2007 Krmiljenje Siemens 840D Mere (d/š/v) 3600 x 2800 x 2400 mm Pomik - X 1035 mm Pomik - Y 560 mm Pomik - Z 510 mm Na voljo več slik

Stanje: rabljeno, Leto izdelave: 2016, Technical details: Bodpfxsudf Evo Afnjld Weight: 22 t

Stanje: rabljeno, Stroj za valjanje navojev ORT RP30U 2-valjna Blsdpfxjt H Ty Uj Afnod 30 ton Zasukljive glave Inverter #1331 Stroj si lahko ogledate v delovanju v našem skladišču v Gussago BS. Možnost demonstracije M i m u Stroji za valjanje navojev so mehanski postopki brez odrezavanja, ki se lahko izvajajo hladno ali vroče, z namenom izboljšanja površinske kakovosti (torej tudi izboljšanja utrujenostnih lastnosti). Moč (tona): 30 Število valjev: 2

Stanje: zelo dobro (rabljeno), Thread diameter: 5 - 200 mm Grinding length: 500 mm Thread pitch: 0.25 - 6 mm Clamping length max.: 850 mm Grinding wheel diameter: 350 mm Bodpewvl H Usfx Afneld Centre height: 105 mm Thread M2 - M149 Thread - inch: 3/32 - 4'' Swivel angle left/right: +/-10° Total power requirement: 6 kW Machine weight approx.: 3.2 t Space requirements approx.: 2.5 x 1.7 x 1.5 m

Stanje: rabljeno, Leto izdelave: 1998, Bore diameter: 90 mm Stroke: 490 mm Throat depth: 400 mm Total power requirement: 10 kW Machine weight approx.: 3,500 kg Space requirement approx.: m KADIA Vertical honing machine Model: VZH 90 / 450 F Year of manufacture: 1998 Serial No.: 50 / 1790 ----- Max. honing diameter: 10 – 90 mm Max. honing depth: 30 – 450 mm Max. spindle stroke: 490 mm Spindle throat depth: 400 mm Installation height under spindle nose (top): approx. 1,200 mm Table size approx.: 400 x 600 mm Max. workpiece diameter approx.: 700 mm Infinitely variable spindle speeds: 160 – 830 rpm Infinitely variable stroke speed: 25 mm/min Spindle drive: 4.5 kW Total drive: 10 kW – 400 V – 50 Hz Weight approx.: 3,500 kg Total machine height approx.: 4,000/3,300 mm Accessories / Special features: Bedpfxot Hw T Sj Afnsld • Machine equipped with a PLC control SIEMENS S 5 / Unipos 4.0 for input of all important honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With a fixed table 600 x 400 mm • Automatic shutoff after a specific, preset time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feeding head ESZ 90/1 D • Separate hydraulic system, central lubrication, workpiece clamping device on the table • Currently no suitable coolant system, no honing tools included. Condition: Good to very good – ready for demonstration Delivery: Ex stock – as seen here Payment: Strictly net – upon receipt of invoice