Ekscentrični pritisk - enojni stolpec

MÜLLER-WEINGARTEN ARP 80

Stanje: kot nova (razstavni stroj), ►►► FRONIUS TPS 3200 SET – OFFER ✅ Scope of Delivery: ➤ Fronius TPS 3200 Power Source (320A TRANS PULSE SYNERGIC) ➤ Fronius FK 4000 FC Cooling Unit – Standard-equipped with Flow Control, Thermocontrol, and coolant filter. The chiller will automatically shut down if the water cooling fails or overheats to protect the hosepack. These features alone cost approx. €400 extra from Fronius. ➤ Fronius VR 7000 Wire Feed Case – Compact and practical – in our opinion, the most sensible feed case; wire is safely stored in a closed case. ➤ Fronius Long Intermediate Hosepack – Each unit is supplied with a 5-meter connection hosepack between the power source and wire feed case for increased flexibility and easier handling. Take the wire feed case to hard-to-reach spots! The hosepack is neatly placed on a hook attached to the side of the machine. (Hooks are custom-made by us) ➤ Fronius Large Trolley – Probably the best trolley with cylinder holder on the market. ➤ Binzel Hosepack – With up/down amperage control on the torch. ➤ Earth Cable 3-4m ➤ New Messer Pressure Regulator ➤ New Drum Adapter for large wire reels This unit can weld almost all materials, including aluminium, steel, and stainless (V2A). It has pulse wire programs and is suitable for MIG brazing (CuSi), commonly used in bodywork and sheet metal workshops. Additional options available at extra cost E.g. Fronius Aw4000/Aw5000 Job Master hosepack (torch display) + EUR 550.00 ----- IMMEDIATELY AVAILABLE PROPER INVOICE Viewing possible in Austria, Vienna 1230! ✔ Insured pallet shipping is no problem! ✔ We are also available via Whatsapp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ Hodowbil Sepfx Ahxjff ►►►What is the condition of the units? For your information, we purchase nearly-new used units, fully strip and inspect them, replace wear parts as needed, and only release them for sale after successful test welding. All machines are clean and have no burn or melt holes in the displays, nor are they covered in burn marks or dents! You buy from us an item that is ⭐worth seeing and not worn out! ►►►Do we receive an invoice when purchasing from you? Yes, you will receive a proper invoice. If you have a valid VAT ID and meet the criteria for intra-community EU supply, we can issue a net (tax-free) invoice. ►►►Which payment methods do you offer? Advance bank transfer or cash upon personal collection. ►►►Why buy from us? We are professionals for this series of Fronius welding machines and always keep 60-80 units in stock – exclusively Fronius, no other brands! We are experts with these machines and never sell anything we do not know inside and out.

Stanje: rabljeno, Leto izdelave: 2009, skupna dolžina: 5.500 mm, skupna širina: 2.300 mm, skupna višina: 2.900 mm, Poids : 18 700 kg Prix : Sur demande - Année de construction : 2009 - Documentation disponible : Non - Marquage CE : Oui - Certificat CE : Non - Numéro de série : 83261 - Commande : CNC Hfodpoxrl Hdefx Ahxjf - Marque du système de commande : HACO - Type de système de commande : BC59T Graphics - Nombre d’axes [pcs] : 6 : Y1+Y2+X+R+Z1+Z2 - Force de pressage [tonnes] : 250 - Largeur de travail max. [mm] : 4 300 - Distance entre montants [mm] : 3 800 - Profondeur butée arrière [mm] : 1 000 - Système de bombage : Commande CNC - Porte-poinçon : À changement rapide - Options : Protection anti-pincement - Dimensions de transport : 5 500 mm x 2 300 mm x 2 900 mm (L x l x h) - Poids de transport [kg] : 18 700 kg - Nombre de colis de transport [pcs] : 1 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tous les équipements industriels Lukas van Rossum

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Hfsdpefg Rlcsfx Ahxjf Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment Hedocubatopfx Ahxeff - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2000, delovna širina: 3.050 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 3 °, najv. debelina pločevine: 6 mm, zadnji prislon: 750 mm, vhodna napetost: 380 V, skupna masa: 4.500 kg, Hidravlične škarje za vertikalno rezanje Znamka: HACO Model: TS 306 Proizvajalec/prodajalec: Casanova Trofazna napetost 380V Leto: 2000 Tip: Vertikalni rez (nagib rezila) Dolžina reza: 3050 mm Kapaciteta: 6 mm Nastavitev kota reza: 0,5-3 stopinje Število pritisnih elementov: 13 Udarec na minuto: 8-14 Kvadratno roko: 1000 mm Hfsdpsxgdlnsfx Ahxef Zadnja letev: 750 mm Motorizirana zadnja letev z ročnim volanom za fino nastavitev Motor: 7,5 kW Teža: 4500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical parameters specified in the manual, on workpieces made of: plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical worktable allows for easy loading and unloading of processed parts and minimises the maximum dimensions of the machine to the essential minimum. Tool changing using a 10-position side-mounted tool magazine enables a wide range of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: Hjdpfx Asmzbr Sohxsff X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speed (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm Hedpfxoirax Uo Ahxsff -Weight: 1500 kg

Leto izdelave: 2004, stanje: pripravljen za uporabo (rabljen), A fully automatic Kasto band saw system is available. Cutting range at 90°: Round material: 530mm, Square material: 530mm x 530mm, Flat material: 530mm x 640mm. Saw blade length: 7675mm, saw blade width: 54mm, saw blade thickness: 1.6mm, cutting speed: 120m/min. Overall system dimensions (X/Y): approx. 18,000mm x 4,000mm. Weight: approx. 6,000kg. Includes roller conveyors. Documentation is available. On-site inspection is possible. Hsdpev S E Edofx Ahxoff

Stanje: rabljeno, Leto izdelave: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Hjdpfjvuun Tsx Ahxjff Clear space between frame walls: 590 mm Shut height: 690 mm Table size: 1500 x 880 mm Slotted opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Space requirement: approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading/unloading and automatic operation according to CE guidelines With steplessly adjustable drive, light barrier (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic die cushion in table (20 t), automatic central lubrication, control panel with two-hand operation Clear distance between tie rods: 940 mm Lateral pass-through: 900 mm

Stanje: rabljeno, Leto izdelave: 1998, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 240 mm Hjdpfx Ahsu Sbpvexsff Cutting capacity at 90 degrees: rectangular Saw band length 2965 x 27 x 0.9 mm Table height mm Band speed 37 / 76 m/min Total power requirement 1.0 kW Machine weight approx. 0.38 t Space requirements approx. 1.0 x 1.6 x 1.4 m Double mitre band saw