Enostebrična ekscentrična stiskalnica z UVV, ekscentrični izvijač, C-okvirna stiskalnica

WEINGARTEN EV 63

Stanje: novo, High-performance thread cutting machine with leadscrew and optimal safety mechanism to prevent tool breakage. Programmable for single or continuous cycle operation. Electronically controlled motor brake in single cycle mode. Easy leadscrew change via quick coupling. Technical Data UNIMAX 3T GL: Thread cutting capacity: M4 - M20 Threads per hour: 800 Standard drilling capacity: 28 mm Spindle: MK 3 Thread depth: 90 mm Drilling depth: 120 mm Throat depth: 260 mm Spindle / table distance: 220 - 600 mm Table surface: 420 x 390 mm T-slot width: 14 mm Column diameter: 110 mm Overall height: 1,300 mm Weight: 250 kg Special motor: 0.9 kW Power supply: 400 V / 50 Hz 9 spindle speeds: Gedpfx Ajgv I Unjfqoil 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packaging: C - 160x75x125 cm Additional accessories/options: Leadscrew, tap holder, retract-release mechanism, externally ventilated motor, die holder, flange quill, foot pulse switch, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Gisdpfx Afekvnumeqel Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: novo, Leto izdelave: 2024, == Demonstration Machine == ALZMETALL Column Drilling Machine ALZSTAR 40 SV with coolant system B (Option 25) (consisting of separate tank (33 l), pump with motor protection switch, complete fittings) and LED machine lamp Standard equipment: Mushroom emergency stop, reversing switch (for right and left rotation), motor protection switch Stepless speed adjustment, digital speed display, feed overload protection, protection class IP54, plug connector spindle guard with electrical interlock Technical specifications: Drilling capacity steel E335 (St 60): 40 mm Thread cutting: Steel E335 (St 60): M 24 Cast iron EN-GJL-200 (GG20): M 30 Short taper: MK 3 Spindle stroke: 120 mm Gisdpfed Hy Elox Afqol Reach: 293 mm Column diameter: 115 mm Machine table, usable area: 514 x 360 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Distance spindle–table min./max.: 117/701 mm Feed: 0.10 + 0.20 mm/rev Machine height excl. options approx.: 1840 mm Net weight approx.: 285 kg Drive: stepless Motor: 1500 / 3000 rpm Power: 1.45 / 1.9 kW Spindle speed: 160–2250 rpm

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness. Gsdpfxofg Rlcj Afqjil

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 mm - Max. machinable length: 210 mm - Spindle speed: 200 – 10,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 20 mm Gisdeuhbbzepfx Afqol - Spindle speed: 200 – 12,000 rpm - Spindle drive power: 2.2 / 3.7 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 5 - Number of driven positions: 3 - Driven tool speed: 8,000 rpm TOOL HOLDER 2 - Number of positions: 3 FRONT TOOL STATION - Number of positions: 8 BACKWORKING - Number of positions: 4 - Number of driven positions: 2 - Driven tool speed: 8,000 rpm ELECTRICAL SUPPLY - Total connected load: 11 kVA WEIGHT AND DIMENSIONS - Required space: 1,655 x 1,125 mm - Machine height: 1,700 mm - Machine weight: 2,000 kg MACHINE HOURS - Operating hours: 13,837 h ACCESSORIES - Control: Fanuc Oi-TD - 3-color status light - Driven guide bushing - Parts removal - Parts conveyor belt - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump: 70 bar - Bar feeder: IEMCA ELITE 220 E / 32 LL - Fire extinguishing system * NB: Functionality not guaranteed. Inspection by a qualified company on the part of the buyer is recommended. - Electrical transformer

Leto izdelave: 2002, Stanje: rabljeno, Pressure: 63 t Reach: 315 mm Giodpelp U D Tsfx Afqjl Stroke: 8–100 mm Stroke rate: 140 strokes/min Ram adjustment: 63 mm Table surface: 1200 x 630 mm Ram surface: 800 x 315 mm Through hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Machine weight: approx. 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot control Roller block strips in table Hydraulic clamp on the ram Counterbalance cylinder Approved for manual loading operations

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine Gisdpfx Afsirax Usqsl -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: rabljeno, Leto izdelave: 1970, številka stroja/vozila: 120895, Pressing force: 63 t Throat depth: 250 mm Stroke: 8 - 100 mm Strokes per minute: 120 s.p.m. Table: 715 x 500 mm Installation height: 330 mm Ram adjustment: 63 mm Clamping plate: 700 x 480 mm Pass-through opening in the table: 240 mm Pass-through opening in the clamping plate: 110 mm Ram clamping surface: 450 x 280 mm Machine weight approx.: 5.5 t Required floor space approx.: 1.2 x 1.7 x 2.7 m Giedpfx Afjfx Hv Heqjl Single-column eccentric press in tiltable design, via hydraulic adjustment system, tiltable in 4 stages, pass-through opening to the rear (325 x 500 mm) or downward (360 x 160 mm), with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot release can be configured, operation mode selector for continuous or single stroke setup, emergency stop switch, piece counter, various accessories.

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Gisdpjd Iipxsfx Afqol Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system

Stanje: rabljeno, TIG Welding Machine MESSER GRIESHEIM Model Combitig GW 23 AC/DC Machine operates only in DC welding mode with contact ignition Serial No.: 445276 Year of manufacture: approx. 1990 Output: 230 Amp. = 35% duty cycle 180 Amp. = 60% duty cycle 140 Amp. = 100% duty cycle Infinitely variable adjustment range Current type: DC Power supply: 400 Volt, 50 Hz, 32 Amp. plug - 2-stroke / 4-stroke welding operation selectable - DC welding with contact ignition functional - AC welding and high-frequency ignition not functional - 7 meter torch hose package with hand torch - Connection socket for remote potentiometer (foot pedal) – foot pedal not included - Air-cooled - Gas pressure regulator included Required space (L x W x H): 850 x 480 x 600 mm Giodpfedzqa Iox Afqol Weight: approx. 90 kg Test welds produce good results when welding stainless steel in DC mode; the HF ignition does not function, but arc can be started via brief contact. AC welding of aluminium cannot strike an arc.