Vodoravne tračne žage – polavtomatske – okroglo območje rezanja 0–300 mm nakup rabljenega (124)

Stanje: novo, Cutting diameter round: 900 mm Csdpfjfg E Hpex Ag Ejhd Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions L x W x H: 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and optimal performance for cutting special steels. • The electro-welded machine frame and steel saw frame fulfill all cutting requirements and eliminate vibrations and noise. • The chip conveyor is hydraulically driven and speed adjustable. • All machine movements (saw frame, vice, feed, saw band guides) operate using modern linear guides with high static and dynamic load capacity, ensuring extremely low sliding friction. • Another key feature is the material positioning rollers, driven by a hydraulic motor. They move at a right angle to the material, allowing optimal material clamping. • Thanks to the height control of the saw band position, the operator can place the band close to the top of the material. After the cut, the band automatically returns to its previous position. Remaining in the lower position can also be selected as an alternative. During the cutting cycle, the software compares cutting load with preset parameters, allowing the sawing system to stop if irregularities are detected. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures exceptionally smooth operation at constant pressure. • Finely ground carbide inserts that clamp the saw band, complete with side-hardened and adjustable guide rollers. The adjustable band guide moves automatically as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder controlled by the machine software. Tension is automatically relieved after a set period if the machine is in standby mode or after a cycle has finished. • Automatic CNC-controlled versions are available in the X-TECH 900 / 1200 models, with a feed length of 500 mm for the high-production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, to ensure precise positioning even under maximum load. • All guided movements are operated by four recirculating ball guides with a high capacity for static and dynamic loads, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Cutting diameter: 240 mm Bandsaw blade dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Cutting speed: 35 + 70 m/min Cutting capacity at 90° round: 240 mm Cutting capacity at 90° square: 230 mm Cutting capacity at 90° rectangle: 270 x 230 mm Cutting capacity at 45° round: 210 mm Cutting capacity at 45° square: 200 mm Chodpfx Aed Iip Sjg Eod Cutting capacity at 45° rectangle: 200 x 210 mm Cutting capacity at 60° round: 130 mm Cutting capacity at 60° square: 130 mm Cutting capacity at 60° flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight: approx. 0.26 t Space requirement: approx. 0.9 x 1.6 x 1.74 m • Miter cut left 60° • Quick-release vice with fast-clamping mechanism • Quick-release lever for easy handling • Frame and gearbox made from a single casting, ensuring very quiet and low-vibration operation • Electronic monitoring of blade tension and blade breakage, with bandsaw blade cover • Carbide bandsaw blade guides • Large machine bed • Machine base (supplied disassembled) with automatic coolant system The AutoCut system consists of: hydraulic cylinder, feed rate control, spring package, limit switch Automatic saw frame lowering via hydraulic cylinder, infinitely variable feed rate, with limit switch at end of cut. Rapid lowering of the saw frame from the resting position to the workpiece, then switch to standard saw feed (for example, for marking). Manual operation: the hydraulic cylinder functions as a brake cylinder (for example, for notching). The brake cylinder allows the saw to be positioned at any point during the return stroke.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90 degrees (flat): 280 x 220 mm Cutting capacity at 90 degrees (square): 220 x 220 mm Cutting capacity at 45 degrees (flat): 220 x 200 mm Cutting capacity at 45 degrees (round): 230 mm Cutting capacity at 45 degrees (square): 200 x 200 mm Cutting capacity at 60 degrees (flat): 140 x 100 mm Cutting capacity at 60 degrees (square): 100 x 100 mm Cutting capacity at 60 degrees (round): 150 mm Vice opening: 285 mm Speed range: 36/72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space required: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic, semi-automatic band saw (INDUSTRIAL) - Capable of mitre cuts from 45° right to 60° left * Mitre adjustment via large rotary table - MEP microprocessor controller EVO for full function control * Mounted on the front right, rotatable - Choice of manual or automatic saw bow lowering * Infinitely variable adjustment of the saw bow lowering - Saw blade guides made of carbide plates Chedoxaa S Rjpfx Ag Eed - Hydraulic saw blade tensioning, incl. digital value display - 2 saw blade speeds - 1 Bi-Metal saw blade - 1 angle stop - Swarf removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation features: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro-dosing unit

Stanje: novo, Leto izdelave: 2026, For sawing pipes and solid materials made of stainless and tool steel - Two band speeds via pole-changing motor - Robust gearbox with hardened and ground shaft - Precise and durable band guides with adjustable carbide inserts - Longer service life for the saw blade thanks to 25° saw arm inclination - Efficient coolant application directly at the saw blade guides - Electromechanical saw blade tension monitoring: A microswitch automatically shuts down the machine in case of deviations - Chip removal brush for optimal cleaning and maintenance of the saw blade Semi-automatic operation: - Automatic workpiece clamping after starting the cutting cycle - Executing the saw cut with the selected band speed - Automatic stop of the downfeed motion and the saw blade at the lower end position - Automatic return of the saw arm to the upper home position - Vise opens automatically - Operator only needs to reposition the material Equipment features: - Two band speeds - Cutting probe - Coolant system - Chip removal brush - Saw blade tension monitoring - Swiveling control panel Dimensions: - Length: approx. 1860 mm - Width/Depth: approx. 1045 mm - Height: approx. 1750 mm - Weight: approx. 405 kg Drive power: - Rated power: 1.5 kW Electrical data: - Supply voltage: 400 V Machine data: - Saw blade speed(s): 20 - 100 m/min - Speed adjustment: stepless Cedpsd Hx Uqefx Ag Eehd - Saw blade length: 2720 mm - Saw blade width: 27 mm - Saw blade thickness: 0.9 mm - Mitre angles: +60° to -45° Cutting capacities: - 0° round (tube): 230 mm - 0° round (solid): 150 mm - 0° rectangle horizontal (hollow section): 280 x 180 mm - 0° bundle (tube): 180 x 120 mm - -45° round (tube): 195 mm - -45° round (solid): 110 mm - -45° rectangle horizontal (hollow section): 180 x 170 mm - -60° round (tube): 125 mm - -60° round (solid): 80 mm - -60° rectangle horizontal (hollow section): 120 x 100 mm - +45° round (tube): 185 mm - +45° round (solid): 110 mm - +45° rectangle horizontal (hollow section): 180 x 120 mm Feed: - Table height for material infeed: 785 mm - Min. remaining workpiece length: 22 mm

Stanje: novo, Electric voltage: 400 V Frequency: 50 Hz Number of phases: 3 Chjdpfx Asd R Uz Tog Eod Weight: 486 kg Blade dimensions: 2700 x 27 x 0.9 mm

Stanje: novo, Leto izdelave: 2026, Standard Equipment - Torsion-resistant, robust cast saw frame - Powered chip removal brush - High-performance industrial worm gear motor - Automatic shut-off after cutting process - Mechanical saw blade tensioning with electric blade breakage monitoring - Quick-release, movable vise - Hydraulic saw frame lowering with rapid traverse function (infinitely adjustable) - Electric coolant pump - Precision ground carbide saw blade guides (adjustable) - Large diameter round support table, rotates during miter cuts, miter angle display (scale) facing operator - Direct switch from manual to lowering operation - Easily removable chip collection tray - Material stop 500 mm with scale - Incl. saw band with combined tooth pitch 4/6. Technical Data - Motor: Three-phase 400 V, pole-changeable, 1.1/1.5 kW - Saw blade dimensions: 2720 x 27 x 0.9 mm - Flywheels Ø: 300 mm - Cutting speed: 40/80 m/min - Vise clamping width: 275 mm - Working height: 978 mm - Weight: 370 kg - Machine dimensions (W x D x H): 1150 x 1588 x 1477 mm Cutting range: see data sheet Additional accessories available on request. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? Csdpfefg Eq Rex Ag Eehd WE ARE AN OFFICIAL FLOTT SERVICE PARTNER AND CAN OFFER YOU THE ENTIRE RANGE OF FLOTT PRODUCTS! REQUEST A QUOTE!

Stanje: novo, Leto izdelave: 2026, Fully hydraulic lowering and raising function of the saw frame Hydraulic opening and closing of the vise Automatic shut-off at the end of the cut, with return of the saw arm to the starting position Torsion-resistant saw frame made of cast steel (multiple ribbed) Hydraulic short stroke cylinder for the vise Precisely ground, adjustable carbide saw band guides Electric coolant pump Manual band tensioning with indicator, including electric monitoring of saw band and cutting pressure Hydraulic vise (opening and closing) Rotating chip removal brush Large, solid round support table, rotates for miter cuts with preset cutting channel; miter adjustment manual, scale reading Material stop 500 mm with scale Incl. comb-tooth saw band 4/6 Machine color: - Saw frame RAL 7035 - Machine body RAL 7005 Motor, three-phase 400 V, frequency controlled 1.5 kW Saw band size 2910 x 27 x 0.9 mm Flywheel diameter 325 mm Cutting speed 20–120 m/min Vise opening width 320 mm Working height 760 mm Chodecl Tc Aepfx Ag Ejd Cutting capacity: at 0° = Round D 250 mm, Square 240 x 240 mm, Rectangle 320 x 190 mm Machine dimensions (W x D x H) 1480 x 1700 x 2000 mm Weight 420 kg For further accessories, please inquire. DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN OFFER YOU ANY PRODUCT FROM THE FLOTT RANGE! REQUEST A QUOTE!

Stanje: novo, Berg & Schmid tračna žaga GBS 218 Eco AutoCut za poševne reze levo do 60° Vpenjalna čeljust s hitro vpenjalno napravo Vodilo žaginega traku iz trde kovine za zelo natančen rez Vgrajen nadzor napetosti traku, električna avtomatika hlajenja, strojno stojalo 3-stopenjski AutoCut sistem z ročno funkcijo, motor 400 V / 1,2 kW Teža cca 240 kg, hitrost rezanja 30 + 70 m/min. vključuje 1 specialen žagin trak 2455 x 27 x 0,90 mm Območja rezanja: 90° okroglo / kvadratno / pravokotno 220 / 210 / 230x185mm 45° levo okroglo / kvadratno / pravokotno 150 / 150 / 150x210mm 60° levo okroglo / kvadratno / pravokotno 90 / 90 / 90x100mm Chodpfsyw Ta Sjx Ag Eed

Stanje: novo, Cutting capacity round: 280 mm Saw band dimensions (LxWxT): 340 x 27 x 0.9 mm Cutting capacity 45°: 230 mm Cutting capacity rectangular: 350 x 220 mm Cutting capacity 45° mitre flat: 240 x 180 mm Cutting speed: 20-100 m/min Weight approx.: 595 kg Motor: 1.5 kW KK Kletzer UBS-S 280 Semi-automatic Band Saw High-performance Steel Construction Machine Standard equipment: - M42 bimetal saw blade - Variable speed - Inverter control unit - Coolant system - Automatic saw blade breakage shut-off system - Hydraulic vice - Hydraulic bow - Saw blade tensioning device - Pendant control - Mitre vice Chedpfx Agjrz Uzfj Esd

Stanje: novo, Leto izdelave: 2026, Compact, fully automatic bandsaw (also for mitre cuts up to 45°) Torsion-resistant, robust cast saw frame Powered chip removal brush High-performance industrial worm gear motor Automatic shut-off after cutting with subsequent raising of the saw frame to the infinitely adjustable, pre-set home position Mechanical saw blade tensioning with electric blade breakage monitoring Minimal remnant length 180 mm, smallest possible diameter 5 mm Feed accuracy of 0.2 mm Electric coolant pump Precision carbide saw blade guides, ground (adjustable) Easily removable chip collection tray Includes saw band with combi-toothing 4/6 Machine colour: - Saw frame RAL 7035 - Machine body RAL 7005 12 months warranty for single-shift operation Motor: Three-phase, 400 V, pole-switchable (kW) 1.1/1.5 Saw band dimensions (mm): 2720 x 27 x 0.9 Flywheel Ø (mm): 300 Cutting speed (m/min): 40 – 80 Clamping width (mm): 275 Working height (mm): 768 Dimensions (mm): 2,220 x 1,650 x 1,730 Weight (kg): 495 Chodpfotpg Sajx Ag Eed DELIVERY: FREE OF CHARGE (within Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SERVICE PARTNER AND CAN OFFER YOU THE COMPLETE FLOTT PRODUCT RANGE! REQUEST A QUOTE!

Stanje: novo, 1 brand new semi-automatic horizontal bandsaw with double mitre Manufacturer: HUVEMA / Beka-Mak, Origin Turkey Model: HU 230 DGH-4 / BMSY 230 DGH Technical Data: Cutting capacity: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm Codsvyidmjpfx Ag Eshd +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 795 mm Main drive motor power 1.0 – 1.3 kW, 400 V, 50 Hz Coolant pump motor power 0.12 kW 2 speeds 35 / 70 m/min Saw blade size 2730 x 27 x 0.9 mm Dimensions (L x W x H) 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special Features: • Semi-automatic operation • Hydraulic vice, clamping via foot pedal • Double mitre cuts via swivelling frame o Material remains straight in position! o No need to turn the material for mitre cuts! o High efficiency with significant time savings! • Pre-set precise stops at 0°, 45° and 60° left and 45° right • Interchangeable work table • Hydraulic vice, laterally adjustable to left and right • Adjustable length stop, 500 mm, for repeat cuts of the same length • Arm lowering regulated steplessly by hydraulic cycle; after completing the cut, the arm returns to the starting position and the vice opens automatically • Coolant system • Swarf brush • Swivelling control panel • Electrical safety switches for blade tension and saw blade cover • Emergency stop switch • CE-compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund-Wambel

Stanje: novo, Saw Frame: Swivel Frame Saw Blade Dimensions: 2730 x 27 x 0.9 mm Blade Speed: 35/70 m/min Cutting Capacity Round: 230 mm Cutting Capacity Square: 230 mm Cutting Capacity Rectangular: 320 x 130 mm Dimensions (LxWxH): 1350 x 770 x 1300 mm Working Height: 760 mm Coolant Pump Motor: 0.12 kW Weight approx.: 525 kg Cutting Range 45°: round 210 mm, square 180 mm, rectangular 230 x 160 mm Cutting Range 60°: round 120 mm, square 100 mm, rectangular 120 x 100 mm Cutting Range -45°: round 180 mm, square 150 mm, rectangular 230 x 100 mm Motor: 1.3 kW KK Kletzer 230DG Hydraulic Dual-Mitre Head Bandsaw. Heavy-duty machine made of structural steel. Standard equipment: - M42 bimetal saw blade - Variable speed - Inverter control unit - Coolant system - Automatic shut-off in case of blade breakage - Manual vice - Hydraulic bow Codsrzx Dlopfx Ag Eehd - Blade tensioning device - Trailer control - Double mitre head (cuts in both directions) - Heavy-duty gearbox

Stanje: novo, Saw frame: Swivel frame Saw blade dimensions: 3160 x 27 x 1.1 mm Blade speed: 20-100 m/min Cutting capacity round: 270 mm Cutting capacity square: 270 mm Cutting capacity rectangular: 350 x 220 mm Dimensions (LxWxH): 2230 x 770 x 1450 mm Working height: 910 mm Weight approx.: 525 kg Cutting range at 60°: round 150 mm, square 100 mm, rectangular 150 x 100 mm Cutting range at 45°: round 240 mm, square 170 mm, rectangular 270 x 210 mm Cutting range at -45°: round 210 mm, square 180 mm, rectangular 270 x 210 mm Motor: 1.5 kW Coolant pump motor: 0.12 kW Band Saw KK Kletzer 270DG Gravity Feed Double Mitre Head, Heavy-Duty Structural Steel Machine Standard equipment: - M42 bimetal saw blade - Variable speed - Inverter control unit - Coolant system - Auto. Blade breakage shutoff system - Manual vice - Gravity arc frame - Blade tensioning device - Pendant control - Mitre head, 2 directions Cjdpfsrzx Dpjx Ag Eshd - Heavy-duty gearbox

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Blade speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double miter metal band saw, frequency inverter hydraulics, semi-automatic GBS 250 Super HA-I Easy • Miter cutting left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece – very quiet and low vibration operation • Hydraulic vise, laterally adjustable • Precision industrial-grade bearings • Heavy-duty vise and cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter Chsdefn Andjpfx Ag Ejd • Feed pressure regulator • Support roller (infeed side) • Ball-bearing mounted turntable Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to material start, or proceed directly with cutting for serial cuts 4. Stop saw blade 5. Raise frame just above the material 6. Open vise

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Codpfx Ajfgyicjg Eehd Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight: approx. 0.42 t Space requirement: approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double miter metal band saw, frequency inverter, hydraulic semi-automatic model GBS 250 Super HA-I Easy Csdpfx Agsfgyh Ue Ejhd • Miter cuts: left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece: extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Guided, high-quality industrial bearings • Robust vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cutting monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller (infeed side) • Ball-bearing, rotating table Semi-automatic features: 1. Clamp material 2. Start saw 3. Rapid descent to material or direct cutting in serial operation 4. Saw blade off 5. Raise frame to just above the material 6. Open vice

Stanje: novo, Cutting diameter 250 mm Chedpfx Agefg E H Ie Ejd Saw blade length 2950 x 27 x 0.9 mm Table height approx. 800 mm Band speed 36/72 m/min Total power requirement 1.5/1.8 kW Machine weight approx. 0.37 t MEP Sawing Machine: Saw frame, vise unit, and base made of high-strength cast iron Precision angle scale on the cast iron structure Electrical system (with fully identifiable wiring and 24 V low voltage system) Switch handle IP 55 for manual cycles (if applicable) Rotating chip removal brush for the saw band Vise unit with quick approach Precise stops with setting for miter cuts at 0°, 45°, 60° to the left Bi-metal saw blade 2950 x 27 x 0.9 mm Tools, user manuals, and spare parts order instructions in the user’s language SHARK 281 with manual operation and SHARK 281 CCS with manual mode and cutting with automatic head feed by gravity. CCS (Cut Control System) with (A: selector switch for manual and automatic cutting – B: adjustment of the cutting speed – C: hydraulic brake with reservoir – D: end stop for stopping the band); also available as an option for already produced machines. Quick-adjust vise Hydraulic indicator for band tension Electric coolant pump for cooling and lubricating the saw band and easily accessible coolant tray above the base frame On versions with pneumatic vise (MA), opening and closing of the vise are controlled by a manual valve (optionally foot-operated).

Stanje: novo, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Band speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Operating principle in CCS version: After advancing the material and closing the vices, the cutting process is initiated. The lowering occurs by the weight of the saw arm itself, is balanced by a spring, and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually lifted to the required position for material feeding. Electrical control panel (labeled wiring connections, indicator light for operational readiness, main safety switch with provision for padlock, selector or speed change switch, emergency stop, thermal-magnetic protection, 24-volt low voltage system). Electronic tension converter for the saw band with on-screen display. Manual vice with quick-release lock. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (accessory). Electric coolant pump for cooling and lubricating the saw band. Chip removal brush. Adjustable precision stops for making identical length cuts. Machine is designed for pallet truck transport. Bimetal saw band for solid and profile material. Chodpfx Agjfg E H Te Eed Tool kit and operating instructions included.

Stanje: novo, Cutting diameter: 300 mm Cutting capacity at 90° flat: 330 x 260 mm Cutting capacity at 90° square: 260 x 260 mm Cutting capacity at 45° flat: 270 x 200 mm Cutting capacity at 45° round: 260 mm Cutting capacity at 45° square: 250 x 250 mm Cutting capacity at 60° flat: 170 x 170 mm Cutting capacity at 60° square: 170 x 170 mm Cutting capacity at 60° round: 180 mm Blade speed range: 40 / 80 m/min Saw blade dimensions: 3320 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Semiautomatic electrohydraulic bandsaw SHARK 332 SXI EVO with semi-automatic dynamic and manual operation, equipped with MEP-28 control system for mitre cuts from 45° right to 60° left. Some features: - New centralized control panel mounted on an articulated arm. - Low voltage operating unit: - Polyester membrane keypad with thermoformed raised pushbuttons and actuation feedback signal. - Display shows: * Diagnostics (messages in user language) * Alarms (description of alarm causes) * Status of inputs and outputs * Cut counter * Cutting time per cycle * Saw band motor current draw * Saw band tension * Saw band speed * Numeric display of head position. - Manual 24V IP55 cycle selector switch. - Complete cycle program for all special cutting operations. - Identification of additional special cutting cycles for specific applications. - Latest generation, high-performance hydraulic control unit with low energy consumption. - Rotating table (mounted on 420 mm roller bearings with preloaded thrust bearing). - Two band speeds (40/80 m/min.) with control system. - Designed to accommodate an electronic inverter for stepless band speed adjustment from 20 to 90 m/min. - Bow stroke programmable directly from the control panel for adaptation to the material being cut. - Sliding clamping device, adjustable left and right, with quick-release vice. - Manual blade tensioning control with display via electronic converter. - Base frame designed for complete coolant recovery, even during maximum angle cuts. Csdpefg E H Uefx Ag Ejhd - Coolant tray (equipped with electric pump for blade lubrication and cooling) and swarf drawer (can be replaced with a chip conveyor – see special accessories) integrated into the base frame. - Ready for optional minimal blade lubrication kit (in addition to standard coolant system with emulsifying oil). - Swarf removing brush. - Machine is suitable for pallet truck transport. - Adjustable length stop for repeat cuts of the same length. - Material support arm with roller for securing the loading table. - Bimetal saw blade suitable for solid and profile materials. - Tool kit and operating manual in the respective user language.

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 220 mm Cutting capacity at 90° (square): 220 x 220 mm Cutting capacity at 45° (flat): 220 x 200 mm Cutting capacity at 45° (round): 230 mm Cutting capacity at 45° (square): 200 x 200 mm Cutting capacity at 60° (flat): 140 x 100 mm Cutting capacity at 60° (square): 100 x 100 mm Cutting capacity at 60° (round): 150 mm Vice width: 285 mm Blade speed range: 36/72 m/min Chsdsxaatbspfx Ag Eed Saw blade dimensions: 2950 x 27 x 0.9 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 460 kg Space requirement: approx. 1150 x 1970 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts from 45° right to 60° left * Mitre setting via large rotary table - MEP EVO microprocessor control for monitoring all functions * Swivel-mounted, front right - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw bow lowering speed - Saw band guide with carbide plates - Hydraulic saw band tensioning including digital value display - 2 saw band speeds - 1 Bi-metal saw blade - Coolant system - 1 angle stop - Chip removal brush - Machine base with forklift pockets - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice

Stanje: novo, Semi-automatic metal bandsaw with high cutting accuracy. This machine enables stepless 90° cuts as well as mitre cuts—left up to 45°, right up to 30° (swivel range: left 45°, right 60°). Standard features: - Large rotatable support table with zero wear! (The saw band’s cut channel rotates along during mitre cuts) - Band tension gauge - Hydraulic control of cast iron saw arm Chedod Dpz Sopfx Ag Eed - Hydraulic clamping of the workpiece via short-stroke cylinder - Saw frame height limitation via potentiometer from the control panel - Hydraulic cutting pressure regulation (solid material & tube) - Lowering of the saw arm via hydraulic cylinder; infinitely adjustable - Lifting of the saw arm after cut is manual - Easy, manual sliding of the vise left/right - Electric band tension monitoring with saw blade break control - Coolant pump feeding both saw blade guides - Carbide saw band guides and guide rollers - Bi-metal saw blade M 42 - Chip brush Technical data: ● Cutting range: round flat square 90° 278 340 x 275 275 45° R 260 320 x 255 230 30° R 155 145 x 115 115 45° L 205 145 x 275 180 ● Drive power: 1.5 kW // 400 V // 50 Hz ● Band speed: 20–120 m/min, stepless ● Saw blade dimension: 3125 x 27 x 0.9 mm ● End piece length: 20 mm ● Min. diameter: 5 mm ● Material support height: 775 mm ● Dimensions: 1700 x 1500 x 2100 mm ● Weight: 410 kg

Stanje: novo, Model designation: Shark 282 SXI evo Csdpfxogvkcte Ag Ejhd

Stanje: novo, Model designation: Shark 281 SXI evo Cedpfx Agjgvkglo Eehd

Stanje: novo, Cutting diameter: 250 mm Cutting capacity at 90° (flat): 280 x 200 mm Cutting capacity at 90° (square): 230 x 230 mm Cutting capacity at 45° (round): 190 mm Cutting capacity at 45° (flat): 180 x 180 mm Cutting capacity at 45° (square): 180 x 180 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 110 x 110 mm Cutting capacity at 60° (flat): 110 x 110 mm Vice opening: 285 mm Blade speed range: 36 + 72 m/min Saw blade dimensions: 2950 x 27 x 0.9 mm Control: MEP NC Coolant tank: 95.0 l Total power requirement: 1.5 / 1.8 kW Machine weight approx.: 435 kg Space requirement approx.: 1000 x 2000 mm Equipment: - Robust electro-hydraulic semi-automatic band saw (INDUSTRIAL) - Mitre cuts up to 60° - MEP EVO microprocessor control for monitoring all functions * Front right, rotatable - Choice of manual or automatic lowering of the saw bow * Infinitely variable adjustment of the saw frame lowering - Saw band guides with carbide plates - Hydraulic blade tensioning – including digital display - 2x band saw speeds - 1x Bi-metal saw blade - Coolant system - 1x angle stop - Chip removal brush Csdpfxew U U Uwe Ag Ejhd - Machine base with forklift slots - Operating manual in German Semi-automatic operation: - Electro-hydraulic clamping of the vice - Electro-hydraulic lowering of the saw bow - Electro-hydraulic raising of the saw bow - Electro-hydraulic opening of the vice