Tračne žage - vodoravno

BERG & SCHMID DGS 350/450 HA-I Easy 34

Stanje: novo, Leto izdelave: 2025, CORMAK HBS320 for double-sided miter cutting in the range from -45° to +60°. The machine’s design is based on solutions and projects developed by Polish engineers. Its precision and quality place it at the forefront of band saws, capable of cutting materials up to 320 mm in width. A key advantage of the machine is the latest-generation hydraulic cylinder. The machine features a reinforced vice base and a quick-clamping vice. Machine Features The CORMAK HBS320 metal band saw enables cutting material at any angle between -45° and +60°. Workpieces can be fed manually or by any feeding device. The feed during cutting is gravity-based, utilizing oil flow in the hydraulic cylinder. The operator starts the machine by pressing the start button and sets the cutting speed. After the cutting cycle is completed, the machine automatically stops and the operator raises the arm to the starting position. The saw arm is made from a very robust, single-piece grey cast iron casting. Combined with a 27 mm wide saw blade, it is perfectly suited for serial cutting of structural, stainless, and tool steels. The vice is mounted on an adjustable bed and features quick-release clamping. The blade guides are equipped with ball bearings and carbide inserts, ensuring excellent precision and straightness of the cut. This has a significant impact on band guidance, blade longevity, and cutting quality. The carbide guides greatly reduce wear on both the machine and the blade. The base is a rigid body constructed from welded steel sheets. Inside, there is a separate coolant tank with an electric pump. The top of the base is designed as a tray to collect coolant and chips generated during material cutting. A cast iron worktable with a double-sided pivoting arm and control panel is mounted to the base. Feed rate is adjusted from the control panel. Two blade speeds are available: 44 and 88 m/min. When the saw arm is in the lower position (after the cut), the blade drive automatically switches off. Safety is ensured by blade guards and microswitches that stop the motor when the cutting cycle is complete or any guard is opened. An additional safety feature is automatic shut-off in the event of blade breakage. Technical Data Ø MAX - 260 mm (straight cut) Dkedpji D Dgwjfx Afleg H x W MAX - 320 x 160 mm (straight cut) POWER SUPPLY - 3 phase 400V TOTAL POWER - 1.5 kW ARM DESCENT CONTROL - hydraulic cylinder BLADE LENGTH - 2740 x 27 x 0.9 mm BLADE SPEED - 44 / 88 m/min VICE BASE HEIGHT - 920 mm DIMENSIONS - 1400 x 880 x 1550 mm WEIGHT - 280 kg Cutting Parameters Angle 0º -----ø260 320 x 160 255 x 255 45º R ø210 210 x 200 210 x 210 60º R ø135 135 x 130 130 x 130 45º L ø160 220 x 130 160 x 160 Price stated is NET. The price does not include shipping costs. For more information, please contact us by phone or email. We invite you to view our full offer on our website.

Stanje: dober (rabljeno), We offer steel tanks for the storage of almost all common liquid media. We always have all available sizes from 1,000 litres to 100,000 litres in stock. Dsdpfxogx E Uhj Afljkg No matter how you want your tank to be equipped, we implement your requirements and comply with official regulations at fair prices. Whether it’s an internal lining, 2K epoxy coating, exterior paint, fitting installations or modifications, DEKRA inspection, loading, or transport – we are the right partner for you.

Stanje: novo, Leto izdelave: 2025, Patented mitre system Continuously adjustable cutting speed Hydraulic feed control Hydraulic lifting and lowering of the saw frame Hydraulic material clamping Powerful frequency-controlled saw band drive Swivel range 30° right / 45° left Cutting capacity in mm 45° left round 300, flat 300 x 300 90° round 410, flat 620 x 410 45° right round 360, flat 420 x 360 30° right round 300, flat 300 x 300 Remnant piece length without bundle clamping 60mm Recommended options: Dedpfx Afsh S Nxpjlokg Micro-spray system Laser line Clamping pressure regulator Powered chip brush Manual lifting roller Setup elements

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. Dkjdpofg E Hpjfx Aflsg - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, OPTIMUM OPTIsaw S275N Metal Bandsaw - Display Model - Infinitely adjustable feed, swiveling ----- Technical Specifications ----- Swivel Range: 0 - 60°, Cutting Height: 150 mm, Cutting Depth: 230 mm, Blade Speed: 45 / 90 m/min, Blade Length: 2,480 mm, Dkedpsu R S Hpefx Aflog Motor (400 V): 1.1 kW, Dimensions (LxWxH): 1,400 x 530 x 1,360 mm, Weight: 185 kg - new display machine -

Stanje: novo, Cutting capacity at 90 degrees: round 305 mm Cutting capacity at 90 degrees: square 260 mm Cutting capacity at 90 degrees: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.61 t Required space: approx. 1.5 x 1.75 x 1.9 m Double miter metal band saw with AutoCut function Dsdjfd Abaepfx Afljkg - Miter cuts up to 60° left and 45° right - Ball-bearing rotary table - Vise laterally adjustable - Solid, large material support - Automatic cooling Illustration shows semi-automatic version.

Stanje: dober (rabljeno), Leto izdelave: 2015, Stroj je v dobrem stanju, prikazani deli, ki so prikazani ročno, niso vključeni. X: 1025 mm Y: 560 mm Z: 600 mm Heidenhain TNC 620, Dkjdpfowx N Nfsx Afleg 16.000 vrt/min, HSK 63

Stanje: rabljeno, Leto izdelave: 1982, številka stroja/vozila: 18613, KUNZMANN Universal Tool Milling Machine Model UF 6 NR Year of manufacture: 1982, 2 gearbox stages 1400/2800 rpm, Dsdjiqkc Ispfx Afljkg Table size: 860x240 mm, 3 T-slots 14 mm, spindle taper SK30, Travel distances: X/Y/Z = 450/200/430 mm, spindle speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds on the X-axis, separate coolant tank, chip tray, machine lamp, 3 horizontal milling arbors each with cutter, 2 overarm arbor supports, 1 collet chuck with key, 1 machine vice with crank handle.

Stanje: novo, Model designation Shark 281 CCS Djdpfx Afegvkcheljkg

Stanje: dober (rabljeno), Spectro CIROS CCD Water Analysis Device - Height: 105 cm - Width: 150 cm - Depth: 75 cm Good condition, fully functional. Can be inspected and tested on site. International shipping available. Inspection: Please note that, to avoid any misunderstandings, the item can be viewed and tested under power before purchase. If you have any questions, please ask them prior to purchasing to prevent any uncertainties. For general inquiries or to schedule a viewing appointment, I am always available at the phone number listed below. Dedpsfiqn Ujfx Afljkg Errors in description and prior sale excepted. VAT will be shown separately on my invoices. Shipping via freight forwarder.