Eitec Gmbh nakup rabljenega (67.897)

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036946, vpenjalna sila: 800 kN, premer vijaka: 40 mm, delovna prostornina: 201 cm³, tlak vbrizgavanja: 1.860 letvica, injekcijska masa: 183 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.850 mm, skupna masa: 5.600 kg, ogrevalna zmogljivost: 11,5 kW (15,64 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 735 mm, teža orodja: 600.000 g, Injection moulding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base-level injection moulding machine, precisionMolding, represents the perfect entry-level solution for all-electric injection moulding, ensuring fast and innovative responses to market demands. This machine combines high performance, intuitive operation, and short delivery times. It can be utilised in a range of applications such as packaging, electrical and electronics industries, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the fully electric machine concept – Fast delivery through a base machine concept with a broad range of options available TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM  MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Maximum mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platen (h x v) mm 610 x 560  Mould height min. – max. mm 150 - 400  Maximum opening span mm 750  Maximum mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force fwd/rev kN 22 / 22  Ejector speed fwd/rev mm/s 300 / 300  Maximum mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 40 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1860  Shot volume cm³ 201  Max. shot weight for PS g 183  Injection speed mm/s 200  Injection flow rate cm³/s 251  Screw drive/speed 1/min 334  Plasticising rate (standard) g/s 24.7  Nozzle contact force kN 34 ELECTRICAL PARAMETERS  Connected load kW 20.6  Installed heating capacity kW 11.5  Power supply V / Hz 400 / 50 3 phase with neutral conductor WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.6 Hsdpsud H Dmefx Ag Tji  Length x width x height m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT  Wear-resistant plasticising unit  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve, single (BWAP)  Pneumatic operation for hot runner shut-off, single  Electrical cascade interface, 4-fold  Euromap interface (handling), E18, E63  Euromap interface (central computer), E67, E77  Water manifold, 4-fold  Automatic central lubrication system  Adaptive Process Control (APC)  Injection-compression moulding circuitry  Graphic analysis package The machine is located at our plant in Parsdorf and is available at short notice. Further optional extras can be offered on request. We look forward to your enquiry.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036940, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad range of applications – High energy efficiency thanks to a fully electric machine concept – Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options TECHNICAL DATA: Hodpfx Ajugfw Djg Tsi KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM - MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: 1600 kN - Maximum mould opening force: 120 kN - Daylight (H x V): 570 x 520 mm - Mounting platen (H x V): 770 x 720 mm - Mould installation height min. – max.: 200 – 500 mm - Maximum opening width: 950 mm - Maximum mould opening stroke: 450 mm - Ejector drive: electric - Ejector stroke: 100 mm - Ejector force, forward/reverse: 33 / 33 kN - Ejector speed, forward/reverse: 300 / 300 mm/s - Maximum mould weight: 1200 kg INJECTION UNIT - Screw diameter / type: 50 mm / standard - Effective L/D ratio: 20.2 - Injection pressure: 1,892 bar - Stroke volume: 393 cm³ - Shot weight at max. stroke for PS: 358 g - Injection speed: 200 mm/s - Injection flow rate: 393 cm³/s - Screw drive / rotation speed: 267 rpm - Plasticizing throughput (standard screw): 36.5 g/s - Nozzle contact force: 42 kN ELECTRICAL PARAMETERS - Connected load: 31.2 kW - Installed heating capacity: 15.5 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (incl. control cabinet): 9.7 t - Length x width x height: 5.65 x 1.82 x 1.95 m ADDITIONAL FEATURES - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Electrical interface for pneumatic cascade, 4-fold - Euromap interface for handling: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold, 4-fold - Electrical pre-installation for hydraulic auxiliary unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding circuit - Graphic analysis package - Swivel device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036683, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g,

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036936, vpenjalna sila: 800 kN, premer vijaka: 35 mm, delovna prostornina: 135 cm³, tlak vbrizgavanja: 1.837 letvica, injekcijska masa: 123 g, minimalna višina orodja: 150 mm, izmetalna sila: 22.000 N, hod izmetalca: 100 mm, odmični hod: 750 mm, vgradna višina: 400 mm, skupna dolžina: 4.750 mm, skupna širina: 1.670 mm, skupna višina: 1.820 mm, skupna masa: 5.900 kg, ogrevalna zmogljivost: 8,9 kW (12,10 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 470 mm, teža orodja: 600.000 g, Injection moulding machines directly from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for all-electric injection moulding, enabling rapid and innovative responses to market requirements. It combines high performance, user-friendly operation, and short delivery times. The machine can be used across various application areas, such as the packaging industry, electrical and electronics industry, medical technology, and the automotive sector. Your benefits: – Optimised price-performance ratio for a wide range of applications – High energy efficiency thanks to the all-electric machine concept – Fast delivery times realised through basic machine concept with a broad spectrum of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.:61036936, new, Year 2023) CONTROL SYSTEM • MC P1 with 15" TFT colour display and multi-touch function CLAMPING UNIT • Clamping force kN 800 • Maximum mould opening force kN 120 • Daylight (h x v) mm 470 x 420 • Mounting platens (h x v) mm 610 x 560 • Minimum - maximum mould height mm 150 - 400 • Maximum opening stroke mm 750 • Maximum mould opening travel mm 350 • Ejector drive electric • Ejector stroke mm 100 • Ejector force forward/back kN 22 / 22 • Ejector speed forward/back mm/s 300 / 300 • Maximum mould weight kg 600 INJECTION UNIT • Screw diameter / type mm 35 / standard • Effective L/D ratio 20.0 • Injection pressure bar 1837 • Stroke volume cm³ 135 • Shot weight at max. stroke (PS) g 123 • Injection speed mm/s 200 • Injection flow rate cm³/s 192 • Screw drive / speed 1/min 382 • Plastification rate (standard screw) g/s 19.5 • Nozzle contact force kN 30 ELECTRICAL PARAMETERS • Connected load kW 17.8 Hodpfxjuggb Dj Ag Tei • Installed heating capacity kW 8.9 • Power supply V / Hz 400 / 50, 3-phase with neutral WEIGHT AND DIMENSIONS • Net weight with control cabinet t 5.9 • Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT • Wear-resistant plastification • BluePower full insulation of plastification cylinder • Open nozzle • Air valve, single (BWAP) • Pneumatic control for hot runner shut-off, single • Electrical interface (cascade), 4-fold • Electrical preparation for hydraulic auxiliary unit • Euromap interface for handling, E18, E63 • Euromap interface (central computer), E67, E77 • Water manifold, 4-fold • Automatic central lubrication • Adaptive Process Control (APC) • Injection-compression moulding function • Graphics analysis package • Swivelling device for injection unit The machine is located at our factory in Parsdorf and is available at short notice. Additional optional features can be offered on request. We look forward to your enquiry.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g,

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036721, vpenjalna sila: 6.500 kN, premer vijaka: 70 mm, razmak između stupova: 1.110 mm, delovna prostornina: 1.078 cm³, tlak vbrizgavanja: 1.877 letvica, injekcijska masa: 981 g, odmični hod: 3.200 mm, višina plošče: 1.540 mm, vrsta pogona: Hydraulisch, prosta razpetina: 3.200 mm, teža orodja: 2.200.000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are optimally absorbed and the service life of your molds is increased. The innovative GearX locking system engages instantly and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM • MC 6 with 24" TFT color display featuring multitouch functions CLAMPING UNIT • Clamping force kN 6500 • Max. mold opening force kN 455 • Clear width (h x v) mm 1110 x 960 • Mounting platen (h x v) mm 1540 x 1440 • Mold installation height, min. - max. mm 1550 (without center plate) • Max. opening stroke mm 3200 • Max. mold opening path mm 1650 • Max. mold weight kg 22000 INJECTION UNIT 1 SP2000 • Screw diameter/type mm 60 / Thermoplastic • Effective L/D ratio 23.3 • Injection pressure bar 2420 • Shot volume cm³ 792 • Shot weight at max. stroke for PS g 720 • Injection speed mm/s 140 • Injection flow cm³/s 396 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 72.2 • Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 • Screw diameter/type mm 70 / Thermoplastic • Effective L/D ratio 20 • Injection pressure bar 1877 • Shot volume cm³ 1078 • Shot weight at max. stroke for PS g 981 • Injection speed mm/s 140 • Injection flow cm³/s 539 • Screw drive/rotation speed 1/min 285 • Plasticizing flow g/s 98.3 • Nozzle contact force kN 82 ELECTRICAL PARAMETERS Connected load kW 341 • Power supply V/Hz 400/50 (3 phases with neutral conductor) WEIGHT AND DIMENSIONS • Net weight t 43.5 • Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT • Wear-resistant plasticizing unit • BluePower full insulation for plasticizing cylinder • Open nozzle • BluePower ServoDrive • Pneumatic valve: 1-fold (BWAP), 1-fold (FWAP) • Pneumatic cascade valves: 6-fold (BWAP), 6-fold (FWAP) • Hydraulic core pull: 2-fold (BWAP), 2-fold (FWAP) • Mold heating: 96-fold (3.5 kW) Hsdpew U N Ixsfx Ag Toi • Euromap interface for handling: E18 • Euromap interfaces (mainframe): E67, E77, E78, E63, E82.1 • Adaptive Process Control (APC+) • Graphic analysis package • Sliding table with turning unit, servo-driven • Vertical center plate • Parallel closing and opening pressing during the injection process with parallelism control between FWAP and center plate or BWAP and center plate • ColorForm interface: signal interface for integration of an RPM system • Electrical interface for HRS Flexflow system • Electrical interface and hydraulic valves for "1-K dummy operation" • Interface for connection of a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered on request. We look forward to your inquiry.

Stanje: rabljeno, Quantity-dependent dual system Machine (additional): Separator, condenser, and control cabinet from 2010 Hjdpjvcqzrjfx Ag Tji Equipment: 1 NH3 separator, 2 refrigeration compressors, 1 evaporative condenser, 1 control cabinet

Leto izdelave: 1982, Stanje: rabljeno, Cylindroconical 580 hl fermentation and storage tank – glycol-cooled, 1 x cone cooling, 3 x shell cooling. – Swivelling cone – stainless steel – insulated – short standing support ring Machine (additional info): Outdoor tanks Capacity: 580 hl Operating pressure: 2 bar Operating temperature: 20 °C Hsdpfx Agjvcq A Aj Tji Cooling surface: 29 m² (1 x cone cooling; 3 x shell cooling) Material: stainless steel Orientation/installation: upright Base design: short support ring Features: tank cooling; swivelling cone; insulation; support frame; outlet DN100; CIP connection; 2 x temperature probes; sample valve

Leto izdelave: 2003, Stanje: rabljeno, Machine (additional): Stainless steel brewing vat Total capacity up to top edge of shell: 26,000 liters Diameter approx.: 3 m Shell height approx.: 2 m Material thickness: 3 mm unheated shell Hjdpsvcqz Esfx Ag Tsi Width: 3.4 m Material: Stainless steel 1.4301 Base construction: on stainless steel tube supports, anchored to floor Features: External boiler, conical vapor hood (stainless steel, D = 3,200 mm), conical insulation hood (stainless steel outer diameter = 3,400 mm), 2 outlets DN200 and DN100, manhole DN600, vapor pipe (12,000 mm), internal lighting

Leto izdelave: 1991, Stanje: rabljeno, 6 upright stainless steel tanks with dished ends, cooling jacket, manway, sampling valve, insulation, and central outlet. Purchase of individual units or subsets is possible. Machine (additional info): stainless steel tanks with temperature control Total volume: 2,429 hl Max. pressure for 4 tanks: 0 bar (non-pressurized) Max. pressure for 2 tanks: 5 bar Material: stainless steel Hsdpfx Agevcqulo Tji Configuration/position: upright tanks Base construction: cylindrical with dished ends, supported on 4 square-section legs Equipment: 4 storage tanks (approx. 445 hl each), 2 pressure tanks (320 hl each), manway in the shell, 1 shell cooling zone, insulation with sheet metal cladding Peripheral equipment: integrated temperature control system

Leto izdelave: 1983, Stanje: rabljeno, Yeast propagation system featuring a steamable wort sterilisation tank rated for 2 bar operating pressure with a capacity of 2.47 hl, a second heatable and coolable wort sterilisation tank rated for 2 bar operating pressure with a 12.7 hl capacity, as well as a yeast propagation tank with a capacity of 55 hl, permissible operating pressure of 2 bar, and jacket cooling in the lower third (without cone). All tanks are equipped with agitators. The package also includes a CIP tank. The system is controlled via a Steinecker control cabinet (time-controlled). Tanks are also available individually. Hedpfxovcqt Us Ag Toi Additional machine details: with control cabinet and CIP tank Equipment: 2 wort sterilisation tanks each with agitator (approx. 2.4 hl and approx. 12.7 hl), control cabinet, CIP system, conical pressure tank with agitator.

Stanje: rabljeno, Machine (additional information): Year of manufacture mostly 2003 Wort extraction: 150 hl Grain bill: 2500 kg Power: Three-phase current Hsdevcqrwopfx Ag Tei Voltage: 400 V Frequency: 50 Hz Equipment: Lauter tun, NDK whirlpool wort kettle system with external boiler, additional whirlpool, trub collection system, hop dosing system Peripherals: Lauter wort heater, kettle vapor condenser

Leto izdelave: 1988, Stanje: rabljeno, Machine (Additional Information): Stainless steel tanks with temperature control Total capacity (gross): 904 hl Material: Stainless steel Hedjvcqg Iepfx Ag Toi Equipment: 3 fermentation tanks (1 x 554 hl, 2 x 175 hl), 1 yeast tank (37 hl), integrated temperature control system (Nerb)

Leto izdelave: 1995, Stanje: rabljeno, Flotation tank – Ammonia-cooled, 1 x jacket cooling. – Stainless steel – Insulated and cladded – Short standing base collar – Cleaning air fitting with safety valve Machine (additional information): Outdoor tank for liquid storage Hjdpfxovcqdys Ag Tji Capacity: 74,400 liters Operating pressure: 0.9 bar Width: 3.27 m Height: 12.55 m Material: Stainless steel Orientation/position: vertical Base construction: short standing base collar Features: Cooling: 1 x jacket cooling; insulation; cleaning air fitting with safety valve; temperature measurement

Leto izdelave: 1985, Stanje: rabljeno, Pressure Tank Cellar with 4 upright 32,400 L stainless steel pressure tanks and double-seat valve solution at the operating level. The tanks are cooled with ice water. Hedpsvcqynofx Ag Tei Machine (Additional): 4 pressure tanks Diameter per tank: 2,550 mm Total height per tank: 7,360 mm Cooling surface per tank: 25 m² Permitted operating overpressure: 3 bar Tank volume: 32,400 L Length: 12 m Width: 4 m Height: 7.5 m Material: Stainless steel 1.4301 Equipment: Tank cleaning device with spray head, safety valve, pressure gauge, cleaning air valve combination; sampler, level indicator with flaps, outlet flap, pressure tank documentation and drawings available Periphery: Inlet and outlet piping via double-seat valves Weight: 2,585 kg

Leto izdelave: 1979, Stanje: rabljeno, Machine (additional): Wort cooler Hjdpfevcqtzox Ag Tei Capacity: 150 hl/h Pressure: 6 bar Max. temperature: 100 °C Length: 2550 mm Width: 900 mm Height: 2000 mm Material: Stainless steel Base design: Mounted on frame Features: 2-stage, connection sizes: DN65 (wort, water) and DN80 (ice water) Periphery: Wort aeration, mixing pump, booster pump (water) Weight: 1080 kg

Leto izdelave: 1988, Stanje: rabljeno, Cylindroconical 965 hl Fermentation and Storage Tank – coolable, 1 x cone cooling, 3 x shell cooling. - Swiveling cone - Stainless steel - Insulated - Short standing skirt base - Cleaning air fitting with safety valve - Vacuum valve 12 tanks available, can be purchased individually or as a partial quantity. Machine (additional): Outdoor tanks for liquid storage; years of manufacture: 1988–1991 Capacity: 96,450 l Operating pressure: 2 bar Length: approx. 12,400 mm Width: approx. 3,950 mm Hjdpfx Agjvcqnle Tsi Height: approx. 3,950 mm Material: Stainless steel 1.4301 Orientation / Position: Vertical Base construction: Short standing skirt Equipment: 12 tanks; cooling: 1 x cone cooling, 3 x shell cooling; swiveling cone; insulation; cleaning air fitting with safety valve; vacuum valve; temperature measurement Weight: 6,220 kg

Leto izdelave: 1979, Stanje: rabljeno, Centrifugal high-performance diatomaceous earth filter with buffer tank, DE dosing vessel, and peristaltic pump. Machine (addition): Diatomaceous earth filter Capacity approx.: 110 hl/h Tank volume: 1,550 l Hodpfx Agovcqmbj Tei Operating pressure: 9 bar Operating temperature: 100 °C Operation / Control: Control cabinet with operating buttons Material: Stainless steel Features: Diatomaceous earth dosing vessel, 14.26 hl; peristaltic pump Peripheral equipment: Buffer tank, container

Leto izdelave: 1975, Stanje: rabljeno, Kettle filter system with horizontally stacked filter elements. At the end of the filtration process, the diatomaceous earth is discharged centrifugally. Machine (additional description): Horizontal screen filter Hsdsvcqpcspfx Ag Tei Capacity: 140 hl/h Tank volume: 26 hl Length: approx. 4000 mm Width: approx. 2000 mm Height: approx. 3500 mm Material: Stainless steel 1.4541 (vessel) Base construction: Mounted on feet Equipment: Diatomaceous earth dosing vessel with dosing pumps; pumps; fittings, instrumentation

Leto izdelave: 1979, Stanje: rabljeno, Diatomaceous Earth and Sheet Filter. Sterilizable universal filter for liquid filtration using diatomaceous earth and sterilizing filter sheets. Stationary sheet filter with square filter elements in vertical row arrangement, hydraulic compression of filter sheets. Hydraulic controls operated from integrated electric control panel. Machine (additional): Diatomaceous earth and sheet filter as a combination unit; year of manufacture: 1979–2010 Capacity approx.: 380 hl/h combination filter – Filter area approx. 76–108 m² DE; 18 m² sheet area when filtering beer Operating pressure: 8 bar Power: 6 kW Voltage: 220/380 V Frequency: 50 Hz Length: 10,100 mm Width: 1,320 mm Hedpfx Agevcqn Ss Tsi Height: 1,750 mm Formats: Square filter elements Element layout: Vertical row arrangement of filter elements Operation / control: Integrated electric control panel Material: Stainless steel Orientation / position: Horizontal Base construction: Frame Equipment: Filter plates; filter frames; diverter chamber; collection tray with discharge screw; hydraulic filter sheet compression; hose pump

Leto izdelave: 2001, Stanje: rabljeno, The Pall CFS system is designed as a standalone unit and can be installed directly in front of the bottling line without the need for a buffer tank. It is a fully independent process unit comprising the following components: filter vessel, piping and connectors, membrane cleaning-in-place (CIP) module, integrity testing section, and control panel. The hygienic design, straightforward integrity testing, and full automation ensure the system’s microbiological safety and allow it to be generally operated by bottling line personnel. In cluster filtration, filter elements are grouped into clusters. Each cluster features its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization, and integrity testing are carried out per cluster. Advantages of the CFS principle: - Longer service life - On-site integrity testing - Cluster-based integrity diagnostics - Specialized flushing - High specific flow rate - Short flushing times - Uniform flow across all cartridges - Minimal water consumption - Quick filter element replacement - Controlled backflushing - Minimal beer loss - High biological safety - Continuous availability This filter system is designed exclusively for the filtration of pre-clarified products with conventional filterable properties. Machine (extension): CFS System Flow rate: 400 hl/h continuous Operating pressure: 6 bar Operating temperature: 105 °C Capacity: 1,456 l Power supply: 10 A Voltage: 220 V Water: Cold water: min. 150 hl/h; Hot water (max 65°C): min. 150 hl/h Compressed air: Process air: 4–6 bar; Control air: 5–8 bar Dimensions (L × W × H): 1.40 m × 1.20 m × 1.85 m Hodevcqx Dopfx Ag Tei Base frame: Skid-mounted frame with control & measuring components, filter vessel, cleaning module Configuration: 98 filter cartridges, 3 piston membrane (dosing) pumps, centrifugal pump with frequency inverter (water circuit), various analog and digital sensors (flow, pressure, fill level, temperature, conductivity), various valves, control cabinet Weight: 3,450 kg

Leto izdelave: 1975, Stanje: rabljeno, Stationary sheet filter with square filter elements arranged vertically in rows. Machine (additional info): Sterilizing filter Hjdpfx Agsvcqzlo Tji Capacity: 140 hl/h Number of plates: 119 plates Length: 7,500 mm Width: 1,600 mm Height: 2,000 mm Formats: Square filter elements – 100 cm x 100 cm Layer configuration: Vertical row arrangement of filter elements

Leto izdelave: 1995, Stanje: rabljeno, Only pre-clarified products with standard filterable properties in their composition may be filtered with this filtration system. Hedovcqv Njpfx Ag Tei Machine (additional): CFS system Flow rate: 400 hl/h continuous Operating pressure: 6 bar Operating temperature: 105°C Capacity: 1456 l Power supply: 10 A Voltage: 220 V Water: Cold water: min. 150 hl/h; Hot water (max 65°C): min. 150 hl/h Compressed air: Process air: 4 - 6 bar; Control air: 5 - 8 bar Length: 1.4 m Width: 1.3 m Height: 1.9 m Base frame: Main frame with control, measuring components and filter vessel; cleaning module Equipment: 98 filter cartridges, 3 piston diaphragm pumps (dosing), centrifugal pump with frequency converter (WT circulation), various analog and digital sensors (flow, pressure, level, temperature, conductivity), various valves, control cabinet Weight: 3450 kg

Stanje: rabljeno, Leto izdelave: 1991, consisting of: - SIGMATHERM plate heat exchanger (heat exchange surface 21.5 m²) - Feed tank 1,200 l - Hilge product pump with manual control valve - Hilge hot water circulation pump - 500 l compensation tank - Shell and tube heat exchanger - Compressed air reduction station - Control cabinet with operator panel Hjdpfx Asvcqy Usg Toi Machine (additional description): Juice heating system for pasteurization Capacity: 100 hl/h Permissible operating pressure (PWT): 16 bar, test pressure 20.8 bar Heat exchange surface: 21 m² Length: 5.6 m Width: 2 m Height: 2.4 m Control / Operation: Control cabinet with push-button operation Material: Stainless steel Base construction: Frame Equipment: 2 x tanks; Plate heat exchanger; Shell and tube heat exchanger; 2 x product pumps; Measuring, sensor and control technology, various valves and other fittings

Stanje: rabljeno, Leto izdelave: 2006, Semi-automatic 5L party keg filling line, including filler (6-head), capper, transport peripherals, washer, and inverter. Machine (specification): semi-automatic, 6-head Hsdevcqpiepfx Ag Tsi Power rating: 0.3 kW Current: 1.85 A Voltage: 400 V Frequency: 50 Hz Compressed air: 3.2 cbm/h at 6 bar Length: 5000 mm Width: 3000 mm Height: 2300 mm Control/Operation: PLC S7-200 Equipment: semi-automatic single-head capper, transport peripherals, washer, and inverter