Berg & Schmid Dgs 350/450 Ha-I Easy 34 nakup rabljenega (72.461)

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates Kjdpfxjfgyicj Al Nslr • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: novo, Cutting capacity at 90°: round 305 mm Kjded Iipxopfx Al Nelr Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Kljdpfx Alofgyiaj Njr Cutting capacity at 90°: rectangle 350 x 200 mm Saw band length 3375 x 27 x 0.9 mm Band speed 18 – 100 m/min Table height 940 mm Total connected load 1.5 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m SPECIAL OFFER PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing turntable - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting diameter: 255 mm Saw band length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Blade speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx.: 450 kg Space requirement approx.: 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double miter metal band saw, frequency inverter hydraulics, semi-automatic GBS 250 Super HA-I Easy • Miter cutting left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece – very quiet and low vibration operation • Hydraulic vise, laterally adjustable • Precision industrial-grade bearings • Heavy-duty vise and cast frame • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Feed pressure regulator • Support roller (infeed side) • Ball-bearing mounted turntable Semi-automatic operation: 1. Clamp material Ksdpsfn Andsfx Al Njlr 2. Start saw 3. Rapid downfeed to material start, or proceed directly with cutting for serial cuts 4. Stop saw blade 5. Raise frame just above the material 6. Open vise

Stanje: novo, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangular 400x250 mm Saw blade length 4020x34x1.1 mm Blade speed 37 + 74 m/min Table height 940 mm Total power requirement 1.8/2.2 kW Machine weight approx. 0.68 t Space requirement approx. 1.5 x 1.78 x 1.3 m SPECIAL PRICE!!! Double miter bandsaw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Mitre left 60° + right 45° • Industrial hydraulics, powerful 18 bar • Optimum access to material • Ammeter for monitoring: - Cutting force optimization - Blade service life Kodpfx Alod Iipto Nolr - Cutting performance • Vice opens/closes hydraulically • Chip removal brush • Material rotary table with ball bearings • Quick-release vice, adjustable • Material height sensor (automatic detection of cutting start) Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid descent to material start, or direct cutting in serial operation 4. Switch off saw blade 5. Raise frame just above material 6. Open vice

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Klsdpefgyh Uefx Al Nor Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight: approx. 0.42 t Space requirement: approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double miter metal band saw, frequency inverter, hydraulic semi-automatic model GBS 250 Super HA-I Easy • Miter cuts: left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast in one piece: extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Guided, high-quality industrial bearings • Robust vice and machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cutting monitoring via ammeter • Adjustable cutting pressure feed regulator • Support roller (infeed side) • Ball-bearing, rotating table Semi-automatic features: 1. Clamp material 2. Start saw 3. Rapid descent to material or direct cutting in serial operation 4. Saw blade off 5. Raise frame to just above the material 6. Open vice

Stanje: novo, Cutting diameter: 305 mm Saw band length: 3375 mm Cutting width: 350 mm Saw band dimensions: 3375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 250 mm Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangular: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Cutting capacity at 60° flat: 170 x 100 mm Ksdpfxsu Dbvte Al Njlr Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.7 t Space requirement: approx. 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° to the left and 45° to the right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting capacity at 90 degrees: round 500 mm Cutting capacity at 90 degrees: square 420 mm Cutting capacity at 90 degrees: rectangular 600 x 400 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Space requirement: approx. 1.72 x 2.5 x 2.5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Miter angle left & right up to 60° • Frequency-controlled saw drive • 34 mm blade height • Wear-free, ball-bearing mounted swiveling material support table • Saw blade guides adjustable via extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • 2 integrated support rollers left and right • Removable chip tray (for cleaning/disinfection) • Free-standing, safe and ergonomic control panel • Storage space for saw blades and consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Super-fast pre-tensioning (front loading) • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Minimum cutting diameter round from 10 mm Kjdpfxsupxupo Al Nelr Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material or, for serial cutting, direct cutting 4. Switch off saw blade 5. Raise frame just above material 6. Open vise

Stanje: novo, Cutting capacity at 90° (round): 250 mm Ksdefgyh Sepfx Al Njlr Cutting capacity at 90° (square): 210 mm Cutting capacity at 90° (rectangular): 290 x 210 mm Saw blade length: 2,965 x 27 x 0.9 mm Table height: 940 mm Blade speed: 25 - 90 m/min Total power requirement: 1.1/1.3 kW Machine weight: approx. 0.35 t Space requirement: approx. 1.3 x 0.8 x 1.5 m SPECIAL PRICE!!! Double miter metal band saw Hydraulic semi-automatic with: - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Cutting pressure and feed rate regulator - Blade speed 25 - 90 m/min - Miter cuts up to 60° left and 45° right - Patented, ball-bearing rotary table for easy miter adjustment - Movable quick-release vice - Quick-release lever - Automatic cooling system

Stanje: novo, Cutting capacity at 90° (round): 510 mm Cutting capacity at 90° (square): 450 mm Cutting capacity at 90° (rectangular): 650 x 450 mm Blade speed: 15 – 100 m/min Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! Kljdpfed Iipmex Al Nsr 2-column double miter bandsaw K-tech DG 62/45 HA-I • 2-column miter bandsaw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator • Heavy-duty material inlet roller • Removable chip tray (disinfection) • Energy-saving and low vibration due to angled cutting • Ergonomic, safe, and free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure regulation valve • Hydraulic control of saw frame and clamping vice • LEDs for monitoring all safety functions • Large-diameter drive wheels (520 mm) • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to material start or, in series cutting, directly cut 4. Saw blade off 5. Raise frame just above the material 6. Clamping vice opens

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Blade speed: 15–100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space required approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I Kljdpjfg E Hlofx Al Nor • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to miter cut, feed regulator, and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning/disinfection) • Energy-saving and low-vibration due to miter cutting • Ergonomic, safe, free-standing control panel • Frequency-controlled saw drive 15–100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs to monitor all safety functions • Large-diameter wheels (520 mm) • Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to the material or, for series cuts, cut immediately 4. Saw blade off 5. Raise frame to just above the material 6. Open vise

Stanje: novo, Cutting capacity at 90°: round 250 mm Cutting capacity at 90°: square 210 mm Cutting capacity at 90°: rectangular 290 x 210 mm Saw band length: 2,965 x 27 x 0.9 mm Table height: 940 mm Band speed: 35 / 70 m/min Total power requirement: 1.1/1.3 kW Machine weight approx. 0.35 t Required space approx. 1.3 x 0.8 x 1.5 m SPECIAL OFFER PRICE!!! Double mitre metal bandsaw, hydraulic semi-automatic, equipped with: Kledpfod Iip Rox Al Nor - Hydraulic vice - Material height sensor - Cut monitoring via ammeter - Adjustable cutting pressure feed regulator - Band speed 34 / 74 m/min - Mitre cuts up to 60° left and 45° right - Patented ball-bearing turntable for easy mitre adjustment - Rapid-action vice, movable - Quick-release lever - Automatic coolant system Shipping cost share: 120 EUR

Stanje: rabljeno, Saw blade diameter: 350 mm Cutting range at 90°: round 120 mm Cutting range at 90°: square 110 mm Cutting range at 90°: flat 200 x 88 mm Cutting range at 45°: round 115 mm Klsdpsd Iin Aefx Al Nsr Cutting range at 45°: square 110 mm Cutting range at 45°: rectangular 150 x 80 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.27 t Dimensions (L x W x H): 1.1 x 0.95 x 1.7 m - Hydropneumatic semi-automatic machine - Mitre cuts left/right 45° - Saw head tilting cuts up to 45° (inclined cuts) - Ball-bearing table - Pneumatic double clamping device - Machine base with mist spray device - Chip extraction nozzle on saw blade guard

Stanje: rabljeno, Technical Details: Saw blade diameter: 350 mm Cutting capacity at 90 degrees, round: 110 mm Cutting capacity at 90 degrees, square: 85 x 85 mm Cutting capacity at 90 degrees, flat: 180 x 85 mm Cutting capacity at 45 degrees, round: left/right: 105 / 110 mm Cutting capacity at 45 degrees, square: left/right: 85 x 85 / 85 x 85 mm Klodou Nilyspfx Al Nor Cutting capacity at 45 degrees, flat: left/right: 130 x 85 / 130 x 85 mm Saw blade bore: 40 mm Speed range – stepless: 9 / 18 / 36 / 74 / 4-step rpm Rotary table: Ø 400 mm/min Table swiveling +/-: 60° right and 45° left Compressed air connection: 7 bar Total power requirement: approx. 2.2 kW Machine weight approx.: 430 kg Machine dimensions: W: 0.7 x D: 1.01 x H: 2.1 m The circular saw is an electro-hydro-pneumatic semi-automatic circular saw, which allows mitre cuts up to 45° to the left and 60° to the right on profiles and solid materials. Vertical circular saw Robust, heavy cast construction Max. vice opening: 180 mm Cut counter Vertical travel of saw head: 200 mm Vice opening width max.: 180 mm (jaw size W: 220 x H: 70 mm) Operation via control panel

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Cutting diameter 305 mm Cutting range at 90 degrees: flat 350 x 200 mm Cutting range at 45 degrees: round 250 mm Cutting range at 45 degrees: flat 230 x 200 mm Cutting range at 60 degrees: round 175 mm Cutting range at 60 degrees: flat 170 x 100 mm Cutting speed 18 - 110 m/min Vice max. 350 mm Saw blade dimensions 3370 x 27 x 0.9 mm Motor power 1.5 / 1.8 kW Machine weight approx. 880 kg Dimensions L-W-H 1700 x 2200 x 2000 mm Equipment: - sturdy, electro-hydraulic fully automatic band saw Ksdpeyy A Hyofx Al Nslr - user-friendly controls - miter cuts to the left up to 45° . possible in automatic operation - miter cuts up to 60° . possible only in semi-automatic operation - hydraulic unit with automatic pressure shut-off in idle mode - stationary base frame with large chip drawer and automatic coolant system - stepless saw band speed adjustment (ESC) - rotating chip brush - minimum remnant piece 80 mm - operating manual (PDF)

Stanje: rabljeno, Saw blade diameter: 400 mm Cutting capacity at 90°: round 110 mm Cutting capacity at 90°: square 100 mm Cutting capacity at 90°: flat 200x60 mm Cutting capacity at 45°: round 100 mm Cutting capacity at 45°: square 100 mm Cutting capacity at 45°: rectangular 140x60 mm Total power requirement: 1.5 kW Machine weight: approx. 130 kg Dimensions (L x W x H): 0.8 x 0.7 x 1.3 m SPECIAL PRICE!! Underfloor aluminium circular saw, hydro-pneumatic semi-automatic. · Maintenance unit for pneumatic control · Ball bearing rotary table · Extraction nozzle for chip extraction system · 2 pneumatic vertical clamps · 180° swivel range · Adjustable rear material stop = extendable cutting range · Stepless adjustable saw blade feed · Two-hand safety control · Horizontal clamps (option) · Mist spray unit for coolant emulsion · Motor brake Ksdpod Iinxofx Al Nslr · Machine base frame · For profile cutting, the use of our B & S Coolmatic Plus is mandatory · Saw blade optional

Stanje: rabljeno, Saw blade diameter: 530 mm Cutting capacity at 90°: round 180 mm Cutting capacity at 90°: square 170 mm Cutting capacity at 90°: flat 380x70 mm Cutting capacity at 45°: round 180 mm Cutting capacity at 45°: square 150 mm Cutting capacity at 45°: rectangular 290x70 mm Total power requirement: 2.2 kW Machine weight approx. 350 kg Dimensions (L x W x H): 1.1 x 0.9 x 1.5 m Under-table aluminium circular saw, hydropneumatic semi-automatic. - Maintenance unit for pneumatic control - Ball-bearing rotary table - Extraction port for chip extraction system - 2 pneumatic vertical clamps Kledpfx Ajd Iinwjl Ner - Swivel range 180° - Adjustable rear material stop = extendable cutting area - Infinitely variable saw blade feed - Two-hand safety control - Horizontal clamps (option) - Micro-mist spray system for cooling emulsion - Motor brake - Machine base - For cutting profiles, use of our B & S Coolmatic Plus is mandatory - Saw blade optional

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting capacity flat: 300 x 260 mm Saw blade length: 3920 x 34 x 1.1 mm Table height: 780 mm Blade speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m Unused exhibition machine!!!! 2-column high-performance automatic bandsaw of the SBS series • Modern SNC 20 control in CNC configuration • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic blade tension • Adjustable clamping pressure • Double vice (in front of and behind the blade) • Creep speed for positioning • Bundle clamping, electrically and hydraulically prepared • Chip conveyor The SNC 20 control enables convenient and user-friendly input of up to 20 different sawing jobs (length and quantity). When the desired dimensions are entered, the control automatically calculates the cutting waste and the number of feed cycles. In addition, the error code display system allows for fast troubleshooting. Klodpfx Aexfwbtjl Nsr Including band run-off detection (€1,800)

Stanje: novo, Cutting diameter round: 300 mm Cutting diameter square: 300 mm Cutting dimensions flat: 300 x 260 mm Saw band dimensions: 3920 x 34 x 1.1 mm Table height: 780 mm Band speed: 20 - 100 m/min Total power requirement: 3.7 kW Machine weight approx. 1.65 t Dimensions (L x W x H): 2.0 x 2.05 x 1.7 m SPECIAL PROMOTIONAL PRICE!!!! 2-column high-performance bandsaw automats from the SBS series The SBS series impresses with sophisticated engineering, high quality, durability, and an unrivalled, comprehensive standard configuration. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Adjustable clamping force • Double vice (in front and behind the band) • Creep mode for positioning • Electrical and hydraulic bundle clamping preparation • Chip conveyor The SNC 20 control enables convenient and straightforward programming of up to 20 different sawing operations (length and quantity). When the target dimension is entered, the control system automatically calculates the saw kerf and the number of feed cycles. In addition, the error code display system allows for quick fault diagnosis and troubleshooting. Kledpfefb Nbfjx Al Ner

Stanje: novo, Cutting diameter round: 330 mm Cutting diameter square: 330 mm Cutting diameter flat: 400 x 330 mm Saw band length: 4570 x 34 x 1.1 mm Kodpfx Aofb Nbgol Nslr Table height: 800 mm Band speed: 20 – 100 m/min Total power requirement: 3.7 kW Machine weight: approx. 2.35 t Dimensions (L x W x H): 2.23 x 2.15 x 1.8 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automats of the SBS Series The SBS series impresses with proven technology, superior quality, durability, and an unrivalled range of standard features. • Modern SNC 20 control system (CNC version) • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure regulation • Double clamping vice (in front of and behind the band) • Creep speed for positioning • Electrically and hydraulically pre-equipped bundle clamping • Swarf conveyor The SNC 20 control system allows for convenient and straightforward programming of up to 20 different sawing tasks (length and quantity). When entering the desired length, the control system automatically calculates cut loss and the number of feed strokes required. The error code display system also enables quick error analysis and troubleshooting.

Stanje: novo, Cutting diameter round: 460 mm Cutting diameter square: 460 mm Ksdpfxofg E Hve Al Nelr Cutting diameter flat: 460 x 460 mm Saw band length: 5450 x 41 x 1.3 mm Table height: 800 mm Band speed: 20 - 100 m/min Total power requirement: 5.5 kW Machine weight: approx. 3.2 t Dimensions (L x W x H): 2,675 x 2.15 x 2.05 m SPECIAL OFFER PRICE!!!! 2-Column High-Performance Bandsaw Automats of the SBS Series The SBS series stands out for its advanced technology, high quality, durability, and an exceptionally extensive standard configuration. • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Control buttons with pictograms • Work light • Powered chip brush • Hydraulic blade tensioning • Clamping pressure regulation • Double vice (before and after the blade) • Jog mode for positioning • Bundle clamping, electrically and hydraulically prepared • Chip conveyor The SNC 20 control enables easy and intuitive input of up to 20 different sawing jobs (length and quantity). Upon entering the required dimensions, the control automatically calculates the saw kerf and the number of feed cycles. Additionally, the error code display system provides rapid fault analysis and troubleshooting.

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Control system: CNC Total power requirement: 1.5/1.8 kW Ksdpjd Iipzjfx Al Nolr Machine weight: approx. 0.63 t Space required: approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 255 Super VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cutting start detection) • Frame and gearbox made from a single casting, very quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cutting! • Optimize workflows through CNC control Input options for various parameters such as quantity and material length, automatic offset calculation for the cutting channel • CNC control for 10 different sawing programs with 99 sub-programs each for different lengths and quantities (e.g. 1 sawing program with various section lengths) • Automatic feeding unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, remnants length 170 mm.

Stanje: novo, Cutting range at 90°: round 310 mm Cutting range at 90°: square 280 mm Cutting range at 90°: rectangular 400 x 250 mm Saw blade length: 4020 x 34 x 1.1 mm Blade speed: 18 - 100 m/min Table height: 890 mm Total connected load: 2.2 kW Machine weight approx. 0.99 t Space requirement approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) Kedjd Iiprspfx Al Nelr • Frame and gearbox made from a single casting, very quiet operation with minimal vibration • Removable chip tray (disinfection) • Impact-resistant and ergonomic control panel with oil-resistant EPDM cover • Top access to saw, material and feed unit • Safety cover can be folded up • Fine feed adjustment • Semi-automatic cut! • Optimize workflows with CNC control Input options for various parameters such as quantities and material lengths, automatic calculation of the kerf • CNC control for 10 different saw programs with 99 subprograms for various lengths and quantities, e.g., one cutting program with various cut lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut lengths from 2 mm to 9,999 mm, remnant length 170 mm.

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Band speed: 18 - 110 m/min Total power requirement: 1.5/1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 250 Super VA-I MPS • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover (a). • Material height sensor (c). (Automatic cut start detection) • Frame and gearbox cast in one piece, very quiet cutting and low vibration • Removable chip tray (for cleaning/disinfection) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cut! Automatic sawing with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering required quantity and length: material infeed, cutting process, and piece counting until the program is completed • MPS control for setting the required number of feed strokes • All important machine data is displayed on the LED display during the cutting process (power consumption, cutting time, quantity) • Entered data is stored in RAM memory • The self-diagnostic circuit automatically displays any irregularities as error messages and monitors the entire process • Feed unit mounted on floating bearings • Length adjustment via handwheel and vernier with mechanical position display. Adjustable for cut lengths from 2.5 mm to 420 mm, or by reverse feed function, repeatable 1 - 29 times, remaining workpiece length 210 mm Ksdpfx Aod Iip Asl Nolr

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Klodpfx Asupw R Asl Ner Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cut! • Optimize workflow with CNC control Parameters such as quantity and material lengths can be entered, with automatic kerf compensation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with various section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm. Included: - Micro-spray unit - Leveling elements