Tračne žage - vodoravno

BERG & SCHMID GBS 305 HA-I Easy

Stanje: novo, Cutting diameter: 305 mm Saw band length: 3375 mm Lhedpfx Afsu Dbvterjp Cutting width: 350 mm Saw band dimensions: 3375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 250 mm Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangular: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.7 t Space requirement: approx. 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° to the left and 45° to the right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting diameter: 300 mm Saw blade length: 3320 x 27 x 0.9 mm Table height: mm Ljdjfg E H Tepfx Afrohp Blade speed: 40/80 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 670 kg Space requirement: approx. m Functionality in CCS version: After positioning the material and closing the vices, the cutting process is initiated. The lowering of the saw arm is accomplished by its own weight, counterbalanced by a spring and regulated via a hydraulic brake cylinder. Once the cut is completed, the saw arm is manually raised to the required position for material feed. Electrical control panel (marked cable connections, indicator light for operational readiness, main safety switch prepared for padlock, switch or speed selector, emergency stop, thermal magnetic protection, 24-volt low voltage system). Electronic band tension converter with screen display. Manual vice with quick-clamping system. Base with coolant tray and chip drawer, which can be replaced by a motorized chip conveyor (optional). Electric coolant pump for cooling and lubrication of the saw band. Chip removal brush. Adjustable precision stops for repeated cuts of the same length. Machine designed for pallet truck transport. Bi-metal saw band for solid and profile material. Tool kit and operating instructions.

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangle 350 x 200 mm Saw blade length: 3375 x 27 x 0.9 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.5/1.8 kW Machine weight approx. 0.65 t Space requirement approx. 1.5 x 1.75 x 1.9 m Lsdpfx Afsd Iipxerjhp SPECIAL PRICE!!! Double miter metal band saw, hydraulic semi-automatic GBS 305 HA-I Easy - Miter cuts up to 60° left and 45° right - Material height sensor - Ball-bearing rotary table - Hydraulically operated, laterally adjustable vice - Heavy-duty, large material support - Automatic coolant system

Stanje: novo, Cutting diameter: 240 mm Saw band dimensions: 2730 x 27 x 0.9 mm Table height: 920 mm Cutting speed: 35 + 70 m/min Cutting capacity at 90°, round: 240 mm Cutting capacity at 90°, square: 230 mm Cutting capacity at 90°, rectangular: 270 x 230 mm Cutting capacity at 45°, round: 210 mm Cutting capacity at 45°, square: 200 mm Cutting capacity at 45°, rectangular: 200 x 210 mm Cutting capacity at 60°, round: 130 mm Cutting capacity at 60°, square: 130 mm Cutting capacity at 60°, flat: 130 x 160 mm Total power requirement: 1.2 kW Machine weight approx.: 0.26 t Space requirement approx.: 0.9 x 1.6 x 1.74 m • Mitre cut left 60° • Quick-action vice with rapid clamping device • Quick-release handle for easy handling • Frame and gearbox are cast as a single unit, ensuring very quiet and low-vibration cutting • Electrical monitoring of blade tension and blade breakage, blade cover included • Carbide blade guides • Large machine bed Lhodpfxod Iip So Afrsp • Machine base (delivered disassembled) with automatic coolant system The AutoCut system consists of: Hydraulic cylinder, feed control, spring assembly, limit switch Automatic lowering of the saw frame by hydraulic cylinder; infinitely variable feed adjustment with limit switch at the end of the cut. High-speed lowering of the saw frame from home position to the workpiece, then switch to normal feed rate (e.g., for marking). Manual operation: Hydraulic cylinder acts as a brake cylinder (e.g., for notching). The brake cylinder allows the saw to be positioned in any position during the return stroke.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Wir können es nicht in der Produktion einsetzen, daher der Verkauf. Lhjdpforq A Sxjx Afrop

Leto izdelave: 2022, Stanje: novo, Technical data: - Load capacity: 10,000 kg - Dead weight: 850 kg Lodpfsfxw H Aox Afrshp - Workpiece diameter range: 50 - 3,500 mm - Roller diameter: 250 mm - Roller width: 160 mm - Rotation speed: approx. 100–2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Stanje: novo, Table height: 650 - 1050 mm Dimensions (LxWxH): 2480 x 1230 x 650 to 1050 mm Table width: 1230 mm Table length: 2480 mm Approximate weight: 733 kg This allows the user to flexibly adjust the working surface height to suit specific requirements, thereby improving both efficiency and ergonomics. The height adjustment is provided as standard via manual hydraulics, within a range of 650 – 1050 mm (greater or lower adjustments available upon request). Like the SST fixed series, the worktop also features a 100 x 100 mm grid pattern with Ø 28 mm holes. When used in combination with machining equipment, inspection or rework fixtures (deburring, marking, inspection) can be adjusted to match the height of the machine clamping table. The table systems can be easily relocated using a pallet truck. These mobile systems, with various clamping and securing options, have proven ideal for the maintenance of injection moulding and die-casting tools. Tools can be safely serviced on site immediately after removal from the machine and then transferred to maintenance for repairs. The fully bolted construction of the clamping plate allows the working surface to be replaced cost-effectively if it becomes worn. Lhsdpfxsfk Aifo Afrjp Price must be requested from the manufacturer prior to ordering! For accessories and further information, please follow this link:

Stanje: novo, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangular 300 x 180 mm Lhjdpofgyh Usfx Afrsp Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total power requirement: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL PRICE!!! Double mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Super HA-I Easy • Mitre cuts left 60° / right 45° • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration operation • Hydraulically movable vice • Guided, high-quality industrial bearings • Heavy-duty vice & machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball-bearing turntable Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material or, for series cutting, direct cutting 4. Saw blade stops 5. Raise frame just above the material 6. Open vice

Stanje: novo, Leto izdelave: 2025, Cutting diameter 335 mm Saw blade length 4400 x 34 x 1.1 mm Table height 750 mm Feed 5 - 2300 mm per stroke Cutting area at 90 degrees: flat 500 x 335 mm Cutting area at 45 degrees: round 330 mm Cutting area at 45 degrees: flat 320 x 335 mm Cutting area at 45 degrees: round left 305 mm Cutting area at 45 degrees: flat left 305 x 335 mm Cutting area at 30 degrees: round 180 mm Cutting area at 30 degrees: flat 170 x 335 mm Cutting speed 15 - 150 m/min Workpiece weight max. 250 kg/m Total power requirement 3.0 kW Machine weight approx. 2,550 kg Ljdpfeulnb Djx Afrohp Space requirement approx. 4350 x 2300 x 1900 mm Standard equipment of the MEBAeco 335 DGA-2300: - Safety system according to CE standards using light barrier - Proven MEBA double-column linear bandsaw design with integrated MEBA gripper feed system, stroke length 5 - 2300 mm - MEBA - Visualized program entry with CNC control Fully automatic operation with freely selectable angles between 30° - 135°, length and quantity. Simplified program creation and management for up to 255 programs. The operator enters the sawing tasks via a cut diagram display panel. Input errors are minimized, allowing simple and reliable production order creation by different operators. - MEBA high-performance package: Saw feed via servo-controlled ball screw drive with automatic cutting pressure and feed monitoring, guaranteeing optimal conditions for each cutting job: constant pressure for solid material, constant feed for thin-walled profiles. - Fast and precise material length feed via rack and pinion and AC drive, max. stroke length 2300 mm with integrated roller conveyor up to 3000 mm. - Dual-sided opening of the gripper jaws on the feed system. Ribbed inserts for heavy material transport. - Saw frame made from solid, vibration-damping steel welded construction. - Saw band inclined by 3° relative to the material support surface, ensuring top cutting performance and life span when sawing steel construction profiles. - Combined saw band guides, precision bearings for gentle saw band redirection. Beveled carbide slide guides for saw band guidance. - Miter rotation point (zero point) is the intersection of the saw band and the fixed clamping jaw; thus, there is no change in cutting length when the angle changes. The cutting kerf width is automatically compensated at each angle position. - NC miter angle programming. Control panel is always free-standing for these systems. - Patented double miter clamping system (ERP No.), automatic positioning of clamping jaws. The clamping device automatically moves along with the material, according to the desired mitre, ensuring material is always clamped squarely and close to the saw band. Material clamping is performed using full stroke cylinders. - Rapid-lowering of the saw frame via automatic height selection just above the workpiece. In serial cutting, the saw frame travels just above the material, allowing the next workpiece section to be positioned. Optimal cycle times for both single and serial cutting. - AC frequency-controlled saw band drive, continuously adjustable from 15 - 150 m/min - Backlash-free, preloaded, low-maintenance linear ball guides for material feed and saw frame feed, ensuring smooth and jerk-free operation.

Stanje: rabljeno, Leto izdelave: 2006, Cutting diameter / mm Saw band length / mm Table height / mm Very well-maintained BEHRINGER bandsaw with heavy-duty roller stand, load capacity up to approx. 50 tons. The machine is equipped as standard with stepless cutting speed control, allowing universal sawing of all materials with both low and high tensile strength. Type: HBP650-1204A Lsdpfouia Rksx Afrohp Machine number: 706537 Year of manufacture: 2006 Dimensions: 10,000 x 67 x 1.6 mm Working range round: 20 - 650 mm Working range square min.: 20 x 20 mm Working range square max.: 1,200 x 600 mm Cutting speed: 10 - 110 m/min Remnant length in automatic operation: approx. 90 mm Remnant length manual: approx. 10 mm Saw drive motor power: 9.2 kW Hydraulic pump motor power: 5.5 kW Voltage: 400 V, 50 Hz Connected load: approx. 16 kW Current consumption: approx. 33 A Material support height: 800 mm incl. documentation