Stroj za rezkanje z vrtalnikom

Rogi WMD25LV BRUSHLESS

Stanje: novo, Drilling capacity in steel (diameter): 16 mm Throat depth: 185 mm Drill stroke: 50 mm End mill capacity: 20 mm Spindle taper: MT 2 Gcodsurznwopfx Ab Toa Spindle diameter: mm Spindle speeds: 100–1500 / 200–3000 rpm Table travel, crosswise: 175 mm Table travel, longitudinal: 280 mm Table clamping surface: 500 x 180 mm Connection voltage: 230 V Total power requirement: 0.85 kW Machine weight approx.: 0.12 t Space requirement approx.: 0.86 x 0.6 x 0.9 m Drilling and milling machine with: - Variable spindle speed - Cross slide - Spindle head swivels 90° left/right - Feed via handwheel

Stanje: novo, WM210V - ROGI VARIO METAL LATHE 230V-1Ph Swing over bed: ----- 210 mm Swing over cross slide: ----- 110 mm Centre height: ----- 105 mm Distance between centres: ----- 400 mm Bed width: ----- 100 mm Cross slide travel: ----- 75 mm Compound slide travel: ----- 55 mm Spindle bore: ----- 21 mm Spindle mount: ----- MT3 Spindle speed range: ----- variable 50 - 2500 rpm Thread cutting imperial: ----- 10 - 44 TPI (8) Thread cutting metric: ----- 0.5 - 3 mm (10) Quill travel: ----- 60 mm Quill diameter: ----- 30 mm Quill taper: ----- MT2 Motor power: ----- brushless 600 Watt Weight: ----- 75 kg STANDARD ACCESSORIES * 3-jaw 100 mm chuck - self-centering * 4-way tool post * Chip tray * Rear splash guard * Chuck guard * Leadscrew cover * Tool post guard * Change gear set Godpfxoga Txcj Ab Tsca * Digital speed display * Fixed centres * Forward / Reverse switch * Toolkit in case OPTIONS * 4-jaw 100 mm chuck - independent * Flange for 4-jaw 100 mm chuck * Fixed steady rest WM210V * Travelling steady rest WM210V * Faceplate WM210V * Stand/cabinet WM210V

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Ladies and Gentlemen, We are offering for sale a partially overhauled Deckel FP1 featuring a 3-axis Heidenhain TNC113 active control system, renowned for its ease of operation. This newer model, manufactured in 1989, is equipped with central lubrication, an electric coolant pump, and a machine lamp. The machine has undergone thorough partial refurbishment in our workshop and is therefore in excellent condition. You are welcome to inspect it on site. Delivery time: on request Machine no.: 2102-xxxx Table: fixed angle table or rotary-tilt/swivel table Travel paths: X 300 mm / Y 160 mm / Z 340 mm Quill stroke: 60 mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless, 5–500 mm/min Rapid traverse: 1,200 mm/min Equipment and accessories: 3-axis Heidenhain digital readout TNC113 with active control, stepless feed adjustment on all three axes, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Our service commitment to you: Gcedpfxjpy Eldj Ab Tea - We are a certified master workshop specialized in mechanical engineering - All machines are thoroughly inspected - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul your selected machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional equipment such as safety devices, etc., directly - We are happy to handle shipping and/or installation for you

Stanje: pripravljen za uporabo (rabljen), Migatronic MTE 440 TIG AC/DC welding machine for steel and aluminium. Water cooling unit: Migatronic CTU 3000. Gedoh Ib Idepfx Ab Tjca Maximum welding current: 440 A. Inspected by EWM Service. You are welcome to arrange a viewing. You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. If you have any questions, please feel free to contact us by phone. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Technical data may vary, and errors in the description of the item may occur and are subject to change. Shipping is only available to commercial customers – private buyers can only collect the item in person.

Stanje: novo, Drilling capacity in steel (diameter): 40 mm Throat depth: 275 mm Drilling stroke: 120 mm Spindle taper: MK 4 Speed range: 75 – 3,200 rpm Table traverse (cross): 190 mm Table traverse (longitudinal): 490 mm Gsdoupw Uzjpfx Ab Teca Table clamping surface: 700 x 210 mm Connection voltage: 400 V Maximum cutter diameter: 80 mm Total power requirement: 1.1 / 1.5 kW Machine weight approx.: 0.35 t Space requirements approx.: 0.8 x 0.75 x 1.85 m Drilling/milling machine equipped with: • Thread cutting device • Cross table with adjustable guides • Drill quill feed • Gearbox • SK 40 spindle taper

Stanje: novo, Model SBF 40 TV 1000 je natančni konvencionalni rezkalni stroj iz produktne skupine vrtalno-rezkalnih strojev podjetja KNUTH. Ta robustna naprava ponuja močno vrtanje in vsestranske možnosti rezkanja, zato je idealna izbira za podjetja, ki cenijo zmogljivost in prilagodljivost. Opremljena je z velikimi križno mizo z avtomatskim, brezstopenjsko nastavljivim podajanjem v osi X, kar omogoča učinkovito koordinatno vrtanje in lažje rezkalne operacije. Dolgotrajen menjalnik, ki deluje v oljni kopeli, zagotavlja zanesljivo delovanje. S svedrovim držalom in ročno preklopnim vrtalnim pomikom omogoča individualno prilagoditev med delovanjem. Integriran hladilni sistem podpira obdelavo jekla in neželeznih kovin. Če iščete zmogljiv in cenovno ugoden konvencionalni rezkalni stroj, ga lahko naročite neposredno prek spleta ali zahtevate ponudbo. Gjdpfeuyibcex Ab Tsca

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories Gcodjnzpx Repfx Ab Tsa -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Stanje: novo, WMD30LV - 230V / 1Ph Drilling capacity in steel ----- 32 mm Milling capacity in steel ----- 20 mm Face milling ----- 76 mm Motor ----- brushless 1.5 kW Spindle speed stepless ----- 50 - 3000 rpm Quill stroke ----- 70 mm Spindle taper ----- ISO 30 Worktable ----- 840 x 210 mm Godpfjga T Agox Ab Tjca Cross travel ----- 220 mm Longitudinal travel ----- 565 mm T-slots ----- 3x14 mm Throat distance ----- 240 mm Distance spindle to table ----- 470 mm Weight ----- 230 kg STANDARD ACCESSORIES * Drill chuck incl. arbor * Digital depth stop * Digital spindle speed display * Fine adjustment * Left/right rotation * Milling head swivels 90 degrees left/right * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Power feed (longitudinal) * Milling vice * ISO30 collet holder & 12 collets in case * Milling cutter set

Stanje: novo, Vrtalna zmogljivost v jeklu (premer) 32 mm Izlet 200 mm Vrtalni hod 70 mm Kapaciteta prstnega rezkarja 16 mm Vpenjalo vretena MK3 Obrati vretena 50 - 3000 vrt/min Prečni pomik mize 220 mm Vzdolžni pomik mize 425 mm Delovna površina mize 700 x 210 mm Maks. razdalja med delovno mizo in nosom vretena 470 mm Skupna potrebna moč 1,5 kW Teža stroja pribl. 230 kg Prostorske zahteve pribl. 0,75 x 1,05 x 1,2 m Vrtalni in rezkalni stroj z gmočnim 2-stopenjskim motorjem. Luksuzna upravljalna plošča. Vpenjalo MC 3 - B16. Vrtalna glava 3 - 16 mm. Stikalo levo/desno. Zaščita vretena. Nastavitev na fino. Gsdpfx Abeupxlbe Toca Izmetalni klin. Navojna palica za vpenjanje orodja Pripadajoča orodja.

Stanje: novo, Leto izdelave: 2025, The drill-milling machine can be used for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, threading bolts up to M12 mm, milling up to 80 mm in width, and keyway cutting up to 22 mm. It is also suitable for slotting and face milling. The machine is available immediately from stock. Machine features This machine can be used for drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, threading bolts up to M12 mm, milling up to 80 mm in width, and keyway cutting up to 22 mm. It is also suitable for slotting and face milling. Various accessories can be mounted on it. HEAVY DUTY, STABLE CAST IRON CONSTRUCTION THE MILLING HEIGHT IS ADJUSTED VIA THE SUPPORT, NOT THE COLUMN ROBUST, HIGH-PRECISION CROSS TABLE FOR MILLING/DRILLING, PRECISELY GROUND SURFACE DOVETAIL GUIDES QUIET OPERATION DUE TO GROUND GEAR WHEELS LEFT AND RIGHT SPINDLE ROTATION ROTATING HEAD +/- 90 DEGREES ADJUSTABLE HEAD HEIGHT Machine base available as an option – 200€ Technical data Godsud H Hujpfx Ab Tsca MAX. DRILLING CAPACITY: 45 mm MAX. FACE MILLING: 80 mm MAX. CYLINDRICAL AND FACE MILLING: 28 mm MAX. THREADING: 12 mm SPINDLE TRAVEL: 120 mm SPINDLE TAPER: MT4 SPINDLE SPEEDS (6 MOTOR SPEEDS / 1400 rpm): 95, 170, 280, 540, 960, 1600 min-1 MAX. DISTANCE SPINDLE END TO TABLE: 475 mm DISTANCE SPINDLE TO COLUMN SURFACE: 260 mm WORKTABLE DIMENSIONS: 820 x 240 mm TABLE TRAVEL: 550 x 170 mm MOTOR: 1.1 kW / 1.5 HP VOLTAGE (two options available): 400V (three-phase motor) PACKAGING DIMENSIONS: 1140 x 800 x 1040 mm NET WEIGHT: 270 kg Available accessories MK4/B18 drill chuck arbor Service tools Drill chuck 3-16 mm/B18 Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 User manual in Polish