Demag Df 45 C nakup rabljenega (508)

Stanje: rabljeno, Leto izdelave: 2004, vpenjalna sila: 200 kN, delovna prostornina: 763 cm³, tlak vbrizgavanja: 1.905 letvica, skupna masa: 10.600 kg, premer polžastega transporterja: 60 mm, Dobavni pogoji: iz lokacije Ljdpfeylz Apsx Afgori Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: dober (rabljeno), Leto izdelave: 2006, Clamping force: 250 tons Tie bar spacing: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Max. diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Shot weight: 482 g Injection pressure: 2426 bar Cores: 2 Hot runner: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Lodpfx Afsrgw Exogsri Max. reach: 1000 mm (X-axis), 900 mm (Y-axis), 1400 mm (Z-axis), 2500 mm

Stanje: rabljeno, Leto izdelave: 2001, Clamping force: 250 t Screw diameter: 70 mm Lsdpfxjvbbvkj Afgeri Tie bar spacing (vertical): 630 mm Tie bar spacing (horizontal): 630 mm Design: Horizontal Drive: Hydraulic

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 878 0730, vpenjalna sila: 2.500 kN, razmak između stupova: 630 mm, minimalna višina orodja: 330 mm, izmetalna sila: 69.000 N, hod izmetalca: 200 mm, odmični hod: 675 mm, dolžina plošče: 950 mm, širina plošče: 950 mm, skupna dolžina: 6.500 mm, skupna širina: 1.900 mm, skupna višina: 2.300 mm, skupna masa: 13.100 kg, ogrevalna zmogljivost: 27 kW (36,71 KM), pritisk: 190 letvica, moč črpalke: 4.500 W, moč: 72 kW (97,89 KM), vrsta vhodnega toka: Klimatska naprava, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, vhodni tok: 167 A, Oprema: dokumentacija / priročnik, Technical Specifications – Demag Ergotech 250/630–1450 Clamping unit Clamping force: 2,500 kN Tie bar spacing (W × D): 630 × 630 mm Max. opening stroke: 675 mm Minimum mould height: 330 mm Maximum mould height (with WA): 710 / 830 mm Lrsdpjw Hq Hhjfx Afgsi Platen size (H × V): 950 × 950 mm Max. mould weight: 3,300 kg Max. weight of moving mould half: 2,200 kg Ejector stroke: 200 mm Ejector force: 69 kN Injection unit Screw diameter: 50 / 60 / 70 mm Injection pressure (at 400 °C): 2,426 / 1,905 / 1,400 bar Shot volume: 530 / 763 / 1,040 cm³ Shot weight (PS): 480 / 690 / 940 g Heater capacity (cylinder): 14.8 / 23.1 / 27.0 kW Drive & Power supply Pump motor rating: 37 / 45 kW Total installed power: 52 / 60 / 64 / 72 kW Supply voltage: 3×400 V Frequency: 50 Hz Max. current consumption: 167 A Dimensions & Weight Total length: 6,500 mm Total width: 1,900 mm Total height: 2,300 mm Net machine weight: 13,100 kg

Stanje: novo, Leto izdelave: 2015, številka stroja/vozila: 40600039, Partija na voljo. Več kosov na zalogi. Izdelki so novi in neuporabljeni. Ledpfeywy Ensx Afgjri

Stanje: zelo dobro (rabljeno), Control switch Manufacturer: DEMAG Type: DSE 10 C/CS Ledpfjf Ezbtjx Afgeri Documentation available

Stanje: rabljeno, Leto izdelave: 2008, obratovalne ure: 5.281 h, * Tip: Demag DF 65P * Leto izdelave: 2008 * Moč: 52 kW Lredpfxjwc Igwe Afgji -----Interna številka vozila: 10326-----Možne napake in predhodna prodaja pridržane. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa. WhatsApp nemško, angleško -- WhatsApp nemško, angleško, arabsko

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Schließkraft: 100 t Öffnung max: 500 mm Formenhöhe: 250 mm Plattengröße: 590x600 mm Abstand zwischen den Säulen V: 420 mm Abstand zwischen den Säulen H: 420 mm Typ: Horizontal Antrieb: Hydraulisch Schneckendurchmesser: 30 mm Einspritzgewicht: 103 g Einspritzvolumen: 115 cm³ Lrjdpjx Tdwyofx Afgji Einspritzdruck: 2755 Zusatzausstattung: 1. 2 hydraulische Kernzugkreise an der beweglichen Aufspannplatte (Proportionalventile) 2. Zusätzliche Anschlüsse für 2 Kernzüge an der festen Aufspannplatte 3. Pneumatischer Kernzug (2 Kreise) an der beweglichen Aufspannplatte 4. 4-Zonen-Kühlwasserdurchflussregler mit Temperaturanzeige 5. Druckluftblasventile an der festen und beweglichen Aufspannplatte (programmierbar) 6. Integrierte Heißkanalregelung, 8 Zonen 7. Schnittstellen für externe Düsenheizbänder 8. Schnittstelle für integrierte Temperiergeräte (bis zu 6 Kreise) 9. Schnittstelle für Werkzeugtemperaturüberwachung (2 Kreise) 10. EUROMAP 67 für Automatisierungsgeräte

Stanje: dober (rabljeno), Leto izdelave: 2014, Proizvajalec: DEMAG Nosilnost: 860 kg + 630 kg (opremljeno z dvema dvigali) Točne tehnične mere so prikazane na slikah. Tir za dvigalo je mogoče podaljšati s strukturami in nogami, prikazanimi na slikah, vendar pa so za podaljšanje potrebni tudi drugi elementi tira, ki niso na voljo!! Lrodpeyu R Dzofx Afgsi

Stanje: rabljeno, Tehnične podrobnosti: Lsdpfoyuyiaex Afgsri Nosilnost: 1,25 t Dvig: 4000 mm Razpon: 3000 mm Maks. kot vrtenja: pribl. 300 stopinj Skupna višina stebra: 4020 mm Hitrosti dviga: 8/2 m/min Pot kljuke: 4000 mm Premer stebra: 160 mm Teža: 164 kg Dimenzije D x Š x V: ležeče 4,2 x 3,5 x 0,2 m Tip žerjava: St stebrno vrtljiv žerjav (KBK lahek žerjavni sistem) Proizvajalec: Demag Cranes & Components GmbH Izvedba: Steber z KBK votlim profiliranim nosilcem Uporaba: Manipulacija materiala na montažnih in delovnih mestih

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit design: toggle Control system: NC5 Additional equipment: Euromap 67 Robot interface Controller with pneumatic valve Controller for 5 hot runners Injection unit hardened – bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 Robot Year of manufacture: 2016 6-axis robot: 5 axes powered by electric servo motors: X, Y-telescopic, Z, B, C Travel distances: X-1200, Y-2400, Z-4000 mm Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt can be purchased at additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are test-run by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our company in Łódź. Lodpoyvq Nbefx Afgjri Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR833 robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Shot volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping mechanism: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface Air valves x 5 Hydraulic core pull with proportional valve control x 1 Hot runner control x 5 Hardened injection unit - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 variable output hydraulic pumps Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel paths on axes: X-900, Y-1600, Z-3000 Ljdjyvq Iqepfx Afgsri Touch control panel Robot safety package Robot with adapter, conveyor belt and protective enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Metering volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet operation Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Main drive motor – servomotor driven with inverter – energy saving Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); A and C axes (rotation) – pneumatic Touch control panel Safety package for robot Lrsdpjyvq H Tsfx Afgji Robot with adapter, protective enclosure Robot available for additional price Dimensions: Weight: 4,400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided or you may participate in live technical demonstrations at our facility in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection Unit: Screw diameter: 18 mm Shot weight: 20 g Injection pressure: 2,400 bar Plasticizing volume: 22.8 ccm Clamping Unit: Clamping force: 25 t Lsdsyvqnwopfx Afgori Tie bar distance: 280x280 mm Platen size: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Original Demag tool crane: chain, electrically driven, 2 lifting speeds Dimensions: Weight: 2,600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pump/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video showing the technical test of the selected machine or to take part in live technical tests at our company in Łódź. Price: On request

Stanje: rabljeno, Leto izdelave: 2002, Opportunity to acquire a DEMAG injection moulding machine with 1000T clamping force and 140,000 operating hours. Can be inspected in operation by appointment. Availability: 06/2026 Important: The information on this page has been obtained to the best of our knowledge and belief. This information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, this information is non-binding and does not constitute any contractual term. We recommend verifying all essential details during an inspection of the machine. To save unnecessary travel expenses for our clients, we usually recommend arranging a live video inspection. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mould height: 500 mm Max. mould height: 1200 mm Tie bar distance: 1400 × 1120 mm Platen size: 1950 × 1670 mm Screw diameter: 80–110 mm Ledpfoyq Dqgox Afgjri Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Overall length: 13,184 mm Overall width: 3,175 mm Overall height: 2,925 mm Max. pressure ({$P_{max}$}): 190 bar Max. flow rate ({$Q_{max}$}): 486 l/min System current: 409 A Heating current: 154 A

Stanje: dober (rabljeno), Trenjsko kolo, pogonsko kolo za mostno dvigalo, mostno dvigalo, halno dvigalo, montažno dvigalo, delovno mesto dvigalo, kolesni blok, sistem kolesnih blokov -Proizvajalec: Demag, kolesni blok za pogonski mehanizem dvigala -Tip: žal ni točne tip oznake -Premer pogonskega kolesa: 125 mm -Pogonsko kolo: širina tira med merami 48 mm -Prevzem: Ø 30 mm, mere glej slike -Količina: na voljo 2 kosa -Cena: na kos -Dimenzije: 220/97/V160 mm -Teža: 8,5 kg/kos Lsdpfxow Uxt Re Afgeri

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1986, številka stroja/vozila: MIKA-CN, Tehnične podatke: 1x Demag KBK 1 stebrno vrtljivi žerjav NL 125KG z verižnim vitlom Demag DC (125 kg - letnik 2007) Nosilnost pri polnem iztegu: 125KG Višina: cca 3,05 m Višina pod konzolo: cca 2,55 m Iztez: 3 m Višina kljuke: cca 2,15 m Skupna teža: cca 300KG Z verižnim vitlom Demag DC 125KG Lrjdpoyu E I Isfx Afgsi Vključuje: zatič, vodilo za kable, voziček, zaključni pokrov itd. Območje vrtenja 300°, priklop na 400V 16A Žerjav je demontiran in takoj na voljo Lokacija artikla: 75053 Gondelsheim Na voljo so tudi drugi žerjavi, nosilnosti 80-5000Kg, povprašajte za več informacij Glejte slike Dostava s špedicijo ali osebni prevzem le po dogovoru o terminu

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 96.986 h, vpenjalna sila: 600 kN, premer vijaka: 30 mm, This hydraulic injection moulding machine, model DEMAG ET60-200 concept, was manufactured in 2003. It features a clamping force of 600 kN and a maximum mould weight of 580 kg. The machine is equipped with a robust injection unit featuring a screw diameter of 30 mm and an injection pressure of 1900 bar. Take advantage of this opportunity to purchase the DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further information. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mould installation height: 210 mm Lodpfx Aeyg Nfusfgsri • Opening stroke: 400 mm • Max. mould weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on ejector side/ES) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Shot volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Armoured/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 tonnes Additional equipment • Robot / parts removal device: W621-1381 • Strokes: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: integrated 7-zone control • Tool sensors: Kistler (p=1/t=0)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 15.642 h, premer vijaka: 45 mm, skupna višina: 2.213 mm, skupna masa: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection molding machine, ideal for precise plastics processing. Take advantage of the opportunity to purchase this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection molding machine. Contact us for further information. Additional Equipment • Fanuc robot Machine Advantages Qualitative Machine Advantages • Process data acquisition, mold protection Technical Machine Advantages Lredpfox D Hntjx Afgoi • Minimum mold height: 350 mm / maximum mold height: 745 mm • Electronic main connection: 3/400 V 50 Hz • Programmable process, high dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Additional Information Standard Equipment: Support of the moving platen via linear guides/ Short/long stroke ejector/ Interface for external printer (hardcopy)/ Individual axis motion optimization (activeAdjust)/ Four-stage mold closing and four-stage mold opening process/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3-phase + N + PE/ Separate mains connections for drive/heating/ Color data display/ Reinforced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mold and machine cooling/ Basic version Europe/ Corrosion protection/ Paintwork: Jet black (RAL9005): machine bed with installations, lower control cabinet/ Signal white (RAL9003): clamping unit, injection unit, nozzle protection/ Signal white (RAL9003): fixed safety devices, upper control cabinet/ Signal white (RAL9003): safety doors/ Structured Surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoder for injection, mold, and ejector movement)/ Mold connection dimensions Type E (according to EUROMAP March '96)/ Centering diameter fixed platen: 160 mm/ Centering diameter moving platen: 160 mm/ No side ejector plate/ Standard Mold Installation Height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety door closed)/ Ejector with position control (P/F+V independently programmable, parallel to mold movement)/ Oil lubrication of toggle lever/ Injection unit/ Optional Equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for fine filtering in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Warning light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on moving platen (programmable)/ 6 pneumatic 5/2-way valves on fixed platen (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with check valves)/ Manual pressure relief for core pull 1-circuit/ Operator-side safety guarding extended (250 mm)/ Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force regulation/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with discharge option/

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 27.551 h, vpenjalna sila: 2.200 kN, skupna višina: 2.100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It is an electric injection moulding machine renowned for its precision and efficiency. Ideal for anyone looking to expand their production capabilities with reliable technology. Contact us for further information. Additional Equipment • Sepro robot SDR 22 Machine Advantages Technical Machine Specifications • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / max. shot volume: 329 cm³ / max. shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Metering stroke: 207 mm / max. nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kN / number of heating zones: 4 / hopper capacity: 50 l / max. injection speed: 160 mm/s • Clamping force: 2420 kN / max. opening stroke: 550 mm / min. mould height: 300 mm / max. mould height: 580 mm / max. platen distance: 1130 mm Ledpfxox D Hnyj Afgori • Platen size (h x v): 880x830 mm / tie bar spacing (h x v): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kN • Dry cycle time according to Euromap 6 (stroke): 427 mm • Net weight without oil: 10,100 kg Dimensions Machine depth: 6460 mm

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has been in operation for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Please contact us for further information. • The dosing unit (orange part) is not included. • Integrated country-specific socket combination • Can be switched off via the main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the movable mould mounting platen; • Programmable, supplied via central air connection • Includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point located outside the control cabinet • Interface for additional nozzle heating band; socket only Lrodpfx Aex D Nluofgei • 2-circuit core pull via solenoid valve on the movable mould mounting platen; operation independent of clamping force (programmable); • With pilot-operated check valves to prevent core creep • Mould connection dimensions E (similar to Euromap March 96) • With side-mounted ejector plate, centering diameter of the fixed platen: 160 mm • Centering diameter of the moving platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm