Demag Ac 30 City nakup rabljenega (507)

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Drive: Wheel Unladen weight: 22,000 kg Lifting capacity: 30,000 kg Serial number: 86584 Lodpfx Adswwqbyekehd Front tire condition: 70% Rear tire condition: 70% Transport dimensions (L x W x H): 8.3 x 2.4 x 3.45 m Please contact PFEIFER GROUP for further information.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 203.229 km, vrsta goriva: dizel, barva: rumena, prva registracija: 10/2003, Leto izdelave: 2003, obratovalne ure: 24.503 h, Tehnične informacije Število valjev: 6 Dimenzije Mere (D x Š): 1027 x 255 cm Teže Lastna teža: 47.900 kg Nosilnost: 100 kg Lhedpfx Aoydcn Rsdked Skupna dovoljena masa: 48.000 kg Funkcionalno Dolžina droga: 64 m CE označba: da Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Finančne informacije Cena: po dogovoru Identifikacija Registrska številka: BN-ZB-46

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 203.229 km, vrsta goriva: dizel, barva: rumena, prva registracija: 10/2003, Leto izdelave: 2003, obratovalne ure: 24.503 h, Tehnične informacije Število cilindrov: 6 Mere Dimenzije (D x Š): 1027 x 255 cm Teže Lastna teža: 47.900 kg Nosilnost: 100 kg Skupna dovoljena masa: 48.000 kg Funkcionalnost Dolžina droga: 64 m CE oznaka: da Lhjdpjydb Sujfx Adkjd Stanje Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Identifikacija Registrska številka: BN-ZB-46

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Unladen weight: 48,000 kg Lhodpswk T Uisfx Adkjd Lifting capacity: 220,000 kg Serial number: 82609 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information.

Stanje: rabljeno, Kran na stebru DEMAG tip PK1 N-F Nosilnost: 125 kg Dolžina pomika roke: 3500 mm Višina pod kljuko: 2200 mm Skupna višina stebra: 3150 mm Višina pod roko: 2700 mm Z električnim vitlom Dolžina izhoda verige: 2100 mm V dobrem stanju Lhedpfx Adjxpubxeked Napetost: 380 V Teža: cca 250 kg

Stanje: rabljeno, CNC control, control panel, operator console, operator unit, card slot, control cards, MC3 controller, plug-in cards, printed circuit boards, valve module, valve amplifier, circuit board, analog distribution card, load amplifier -Manufacturer: bg Bernd Grigat, load amplifier from Demag D 100-275 NC injection molding machine -Type: QVA 30/1 .: 2442/00 Lodpon Hbcyefx Adkjhd -Quantity: 2x amplifiers available -Price: per unit -Dimensions (total): 100/40/H110 mm -Weight: 0.3 kg/unit

Stanje: pripravljen za uporabo (rabljen), Demag DCS-Pro 1 80 1/1 H3 VS30-30 verižni dvigalo / žerjav SN: 94828902 – Nosilnost: 80 kg / Dolžina kabla za ročno upravljanje: 2,00 m – Dolžina verige: 1,40 m, rabljen, dobro ohranjen, 100% delujoč, obseg dobave v skladu s fotografijami. Lhodpfxex Eq Hle Adkod

Stanje: skoraj kot novo (rabljeno), številka stroja/vozila: DCMS, Leto izdelave: 2007, Demag manulift verižno dvigalo nosilnost: 125 kg višina dviga: 2,8 m vlečna razmerja: 1/1 Lhedpfeg Stp Hjx Adkjd hitrost dviganja: brezstopenjska 0,15 - 30 m/min izvedba: opremljeno z obešalnim očesom rabljeno v zelo dobrem stanju (v celoti pregledano) (nova cena € 3353,-) Na voljo več DCMS dvigal

Stanje: rabljeno, Tehnične podrobnosti: Nosilnost: 1,25 t Dvig: 4000 mm Razpon: 3000 mm Maks. kot vrtenja: pribl. 300 stopinj Skupna višina stebra: 4020 mm Hitrosti dviga: 8/2 m/min Pot kljuke: 4000 mm Premer stebra: 160 mm Teža: 164 kg Ljdpfx Aoyuyiajdkshd Dimenzije D x Š x V: ležeče 4,2 x 3,5 x 0,2 m Tip žerjava: St stebrno vrtljiv žerjav (KBK lahek žerjavni sistem) Proizvajalec: Demag Cranes & Components GmbH Izvedba: Steber z KBK votlim profiliranim nosilcem Uporaba: Manipulacija materiala na montažnih in delovnih mestih

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit design: toggle Control system: NC5 Ljdjyvq Nbopfx Adkjhd Additional equipment: Euromap 67 Robot interface Controller with pneumatic valve Controller for 5 hot runners Injection unit hardened – bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 Robot Year of manufacture: 2016 6-axis robot: 5 axes powered by electric servo motors: X, Y-telescopic, Z, B, C Travel distances: X-1200, Y-2400, Z-4000 mm Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt can be purchased at additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are test-run by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR833 robot Year of manufacture: 2012 Lsdpfeyvq Iqsx Adkehd Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Shot volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping mechanism: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface Air valves x 5 Hydraulic core pull with proportional valve control x 1 Hot runner control x 5 Hardened injection unit - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 variable output hydraulic pumps Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel paths on axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt and protective enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Demag Ergotech System 80/420-430 Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Shot weight: 205 g Injection pressure: 2,020 bar Injection volume: 231 cc Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Lhsdpfxsyvqpbj Adked Platen size: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runner support Hardened injection unit – bimetallic Built-in printer Option to change screw diameter Dimensions: Weight: 4,100 kg Length/Width/Height: 4.10x1.40x1.90 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection Unit: Screw diameter: 18 mm Shot weight: 20 g Injection pressure: 2,400 bar Plasticizing volume: 22.8 ccm Clamping Unit: Clamping force: 25 t Tie bar distance: 280x280 mm Platen size: 410x410 mm Ejector: hydraulic Lodjyvqnwopfx Adkshd Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Original Demag tool crane: chain, electrically driven, 2 lifting speeds Dimensions: Weight: 2,600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pump/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video showing the technical test of the selected machine or to take part in live technical tests at our company in Łódź. Price: On request

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations Lodex D Rqropfx Adkjhd • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm Ljdpfx Asyfq Alsdkohd • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 122.158 h, vpenjalna sila: 3.300 kN, premer vijaka: 60 mm, This hydraulic injection moulding machine, DEMAG ET 330 - 1450, was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for a wide range of applications. The machine is equipped with a Wittmann W322-121 linear robot, enhancing automation capabilities. Take advantage of this opportunity to purchase the hydraulic injection moulding machine DEMAG ET 330 - 1450. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mould installation height: min. 330 mm / max. 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit Code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cm³ • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Hardened (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0 zone (none) Lhjdpfjyg Nkwex Adkod • Maintenance: • Hose replacement performed in 2017 Additional Equipment • Wittmann W322-121 CNC linear robot/extraction unit (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Stanje: rabljeno, Leto izdelave: 2004, vpenjalna sila: 110 kN, delovna prostornina: 2.926 cm³, tlak vbrizgavanja: 1.600 letvica, skupna masa: 5.650 kg, premer polžastega transporterja: 45 mm, Dobavni pogoji: iz lokacije Lhodpfxoymqz Re Adkod Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Leto izdelave: 2005, vpenjalna sila: 110 kN, delovna prostornina: 2.926 cm³, tlak vbrizgavanja: 1.600 letvica, skupna masa: 5.650 kg, premer polžastega transporterja: 45 mm, Dobavni pogoji: iz lokacije Lhodpfx Aeymqz Dodked Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Deli za dvižni mehanizem žerjava za dvižni mehanizem tip DH500 / DH1000 Dvižni motor KBH140 B4 Dvižni motor KBH140 B2/12 Dvižni motor KBH160 B4 Dvižni motor KBH200 B4 Lhedpfov Uu T Nsx Adkod za dvižni mehanizem P-Zug Dvižni motor 24/10 K4P Dvižni motor 24/14 K4P Dvižni motor 28/12 K4P Dvižni motor 36/20 K6P Dvižni motor 36/24 K6P Precizni reduktor FG08 FG10 Bobni za žico, ohišje, vodila vrvi Informacija: na zalogi imamo več kot 20.000 DEMAG rezervnih delov! Oglejte si tudi ostale moje ponudbe iz zaloge!

Stanje: rabljeno, prevoženi kilometri: 411 km, moč: 22 kW (29,91 KM), prva registracija: 03/2004, vrsta goriva: dizel, lastna masa: 760 kg, barva: rumena, vrsta prenosa: mehanski, vzmetenje: drugo, obratovalne ure: 411 h, Moč motorja: 22 kW, dizelski motor, letnik 2004, samo 411 delovnih ur. Kompresorsko kladivo, zračni vibracijski betonator, lastna teža: 760 kg, kot novo stanje. ZA NAS JE POMEMBNO STANJE IN OBČUTEK, CENA JE NA DRUGEM MESTU. Za dodatna vprašanja vam je na voljo g. Faller na navedeni številki. //*MOŽNA MENJAVA, ODKUP ALI ZALOŽITEV VAŠEGA VOZILA, TER FINANCIRANJE! Vse informacije brez jamstva. Druge ponudbe najdete na naši spletni strani: Opis in navedeni podatki niso jamstvo in niso zavezujoči. Zavezujoča je samo prodajna pogodba, ki se sklene v avtohiši ob nakupu vozila. Pridržujemo si pravico do napak in vmesne prodaje! Lodpfx Adjxrpmuokjhd

Stanje: dober (rabljeno), Leto izdelave: 2006, Clamping force: 250 tons Tie bar spacing: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Max. diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Shot weight: 482 g Injection pressure: 2426 bar Lsdpfergw Exex Adkohd Cores: 2 Hot runner: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm (X-axis), 900 mm (Y-axis), 1400 mm (Z-axis), 2500 mm

Stanje: dober (rabljeno), Leto izdelave: 2010, vpenjalna sila: 1.600 kN, Oprema: dokumentacija / priročnik, Sumitomo Demag Systec 160/520 – Injection Unit 430 Clamping Unit Clamping force: 1,600 kN Mould clamping force: 1,760 kN Max daylight opening: 500 mm Min. mould height: 275 mm Max. mould height: 585 mm (685 mm with WA) Max. daylight between platens: 1,085 mm (1,185 mm with WA) Platen size: 770 × 770 mm Tie bar spacing: 520 × 520 mm Max. mould weight: 2,200 kg Max. weight on moving platen: 1,300 kg Max. weight on fixed platen: 1,700 kg Ejector Ejector stroke: 160 mm Ejector force: 59 kN Retraction force: 29 kN Injection Unit 430 L/D ratio: 20 Screw diameter: 40 mm Lsdpfx Aoyarfdodkohd Injection pressure: 2,025 bar Shot volume: 231 cm³ Shot weight (PS): 210 g Max. dosing stroke: 184 mm Nozzle stroke: 400 mm Nozzle immersion (SVO): 20 mm Nozzle contact force: 80 kN Barrel heating capacity: Ø35 → 9.4 kW Ø40 → 11.1 kW Ø45 → 11.3 kW Electric screw drive (WA): 22 kW Material hopper volume: 35 l Machine Overall Oil tank capacity: 400 l Pump motors: 22 / 30 / 30 kW Total power consumption: 31.4 / 39.4 / 39.4 kW 33.1 / 41.1 / 41.1 kW 33.3 / 41.3 / 41.3 kW EUROMAP 6 (dry cycle): 1.95–364 / 1.75–364 / 1.75–364 Machine weight (without oil): 6,800 kg Dimensions (L × W × H): 5.3 × 1.6 × 2.1 m Noise level: 68 / 71 / 68 dB(A)

Stanje: dober (rabljeno), Leto izdelave: 2012, vpenjalna sila: 2.800 kN, Oprema: dokumentacija / priročnik, Demag Systec 280/630-600 (2012) Zapiralna sila: 280 t Premer polža: 45 mm Utež brizga: 294 g Razdalja med vodili (spredaj): 630 mm Ledpfx Adsxykw Rjkjhd Razdalja med vodili (zadaj): 630 mm Prostornina brizga: 323 cm3 Tip: Horizontalna Pogon: Hidravlični Euromap 67 16 vročih kanalov 4 izvleka jeder 2 ventilatorja

Stanje: dober (rabljeno), Leto izdelave: 2004, Vpenjalna sila: 110 t Lhodpfx Aex Urxnsdksd Premer vijaka: 40 mm Razdalja med stebri V: 465 mm Razdalja med stebri H: 465 mm Tip: Horizontalen Pogon: Hidravlični

Stanje: rabljeno, Demag Ergotech 3300-840, stroj za brizganje plastike Demag, rabljeni stroj Proizvajalec: Demag, Sumitomo Lsdpox Sqi Hjfx Adkshd Model: Ergotech 3300-840 Skupne dimenzije (D x Š x V): 6,5 x 2,0 x 2,2 metra Lastna teža (brez olja): 13.800 kg TEHNIČNI PODATKI (GLEDE NA PREMER POLŽA) ----- Opis Enota "A" "B" "C" ----- Premer polža: [mm] 45 50 60 Razmerje L/D: [-] 20 20 20 Tlak vbrizgavanja (pri 400 °C): [bar] 2402 1946 1351 Volumen brizga: [cm3] 358 442 636 Teža brizga (PS): [g] 320 400 570 Moč grelca cilindra: [kW] 13,0 14,8 23,1 Vgrajena električna moč*: [kW] 58/68 60/70 68/78 ----- * Opomba: Vrednosti so višje pri električnem pogonu polža (WA). LASTNOSTI VBRIZGAVALNE ENOTE ----- Največji hod doziranja: 225 mm Maks. umik šobe: 470 mm Globina potopa šobe: 40 mm (SVO) / 30 mm (SPI) Sila pritiska šobe: 80 kN Električni pogon polža (WA): 20,5 kW Kapaciteta lijaka za material: 75 litrov SPLOŠNI IN HIDRAVLIČNI PODATKI ----- Kapaciteta rezervoarja za hidravlično olje: 700 litrov Moč črpalne enote: 45 / 55 kW Suh cikel (EUROMAP 6a): 1440 / 1600 h-1 Suh cikel (brez gibanja šobe): 1890 / 2100 h-1 Nenehna raven hrupa: 74 dB (A)