Demag Ac 40 nakup rabljenega (528)

Stanje: rabljeno, Demag plasticizing unit IU mm Fjdpoh Nv Itjfx Aplsgb - Removed from Demag Ergotech system 200-560-320 - Taken out of a running machine - Fully functional - Stroke volume: 231 cm³ - Injection pressure: 1,855 bar - Maximum shot weight (PS): 210 g - Cylinder diameter E: 0.01 mm, A: 0.01 mm - Screw diameter E: 39.55 mm, A: 39.8 mm, RSP 39.92 mm - Ø - 06--DEM-001 - Year of manufacture: 2005 - Also suitable for IU320 and IU610 - Nut and coupling need to be replaced Manufacturer: Demag Condition: used

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 17.577 h, vpenjalna sila: 1.600 kN, skupna višina: 2.060 mm, This SUMITOMO SHI DEMAG IntElect 160/520-340 smart was manufactured in 2013. It is an all-electric injection molding machine known for its precision and efficiency. If you are in the market for a high-quality injection molding machine, consider the SUMITOMO SHI DEMAG IntElect 160/520-340 smart, which we are offering for sale. Contact us for further information. Additional Equipment • Sepro Robot SDR 11 Machine Advantages Technical Machine Specifications • Clamping unit: 160 / clamping force: 1760 kN / max. opening stroke: 495 mm / minimum mold height: 275 mm / maximum mold height: 585 mm • Distance between platens, max.: 1080 mm / platen size (H x V): 760 x 785 mm / tie bar spacing (H x V): 520 x 520 mm • Ejector stroke: 125 mm / ejector force: 35 kN • Injection unit: 340 / screw diameter: 35 mm / L/D ratio: 20 / injection volume (PS), without accumulator: 288 cm³/s • Metering stroke: 162 mm / max. nozzle stroke: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact force: 30 kN • Material hopper capacity: 35 l / max. injection speed, standard: 300 mm/s / max. injection speed, increased: 500 mm/s • Net weight without oil: 7300 kg Additional Information Electrical and pneumatic interfaces: - Sockets: - 2 x Schuko (1Ph, 230V, 10A) - 2 x IECEE (3Ph, 400V, 16A) – switchable via main switch - Additional Schuko socket also available (same specification) - Valves: - 1 x pneumatic 5/2 valve on moving platen (programmable) - 2 x pneumatic 5/2 valves on stationary platen (programmable) - I/O: - 3 digital inputs / 3 digital outputs (freely programmable) - Terminal strip outside the control cabinet Air & Cooling: - Central air supply and piping - Cooling system: open circuit - Cooling water controller: 4 circuits with temperature display (max. 10 l/min per circuit) Fgsdox D Hnmjpfx Apljb - Separate water inlet for cooling (mold + machine) - Mold cooling shutoff (time programmable) Mechanical Features & Movement: - Clamping and injection unit colors: - Jet black (RAL9005): bed, pump station, lower control cabinet - Signal white (RAL9003): clamping unit, injection unit, safety covers, guards, safety doors - Platen layout: E standard (similar to EUROMAP, March 1996) - No side ejector plate - Ejector: held in front position by spring-loaded mold ejector - Standard mold height - Standard closing speed - Active movements only when guard is closed - Screw: wear-resistant nitrided cylinder, standard L:D, 35 mm diameter - Non-return valve: 3-piece, ring-shaped Control, Programming & Monitoring: - Inputs/outputs and sequence freely programmable - Switch programs (e.g., dry run, start-up scrap counter, timed cooling) - Injection process: - Injection force at max. injection speed: 200 mm/s - Back pressure programmable via 6-point polygon - Hold pressure switchover depending on melt pressure - Post-injection, back pressure, dosing: closed-loop control - Feed throat temperature control: closed-loop, max. 90°C ±9°C - Reduced nozzle closure force (programmable) - Clamping force: closed-loop controlled

Stanje: rabljeno, Leto izdelave: 2003, (1) Brizgalni stroj, Ravnanje: Wittmann | W621 | 2003 Nadzor temperature: HB Therm | HB-100 Z1 | 2013 Razno: 1x Zaščitni ohišje 1x Transportni trak 1x Krmilnik vročih kanalov, podjetje Mold Masters, 1x Transportna enota, podjetje Motan Tehnični podatki: Napajanje: 3x400 V Frekvenca (Hz): 50 Tok 1 (A): 189 Tok 2 (A): 152 Tok 3 (A): 37 Fgedpfxsy N R Iqj Aplob Teža (t): 10,1 Tlak (bar): 190 Pretok (l/min): 206

Stanje: dober (rabljeno), Leto izdelave: 2005, Zapiralna sila: 200 t Premer vijaka: 50 mm Premer vijaka 2: 22 mm Razdalja med stebri V: 580 mm Razdalja med stebri H: 580 mm Tip: Večkomponentni (2K vbrizgavanje) Pogon: Hidravlični Fgodpeyz Tmyofx Apleb 2x hidravlični ventil

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection Unit: Screw diameter: 18 mm Shot weight: 20 g Injection pressure: 2,400 bar Plasticizing volume: 22.8 ccm Clamping Unit: Clamping force: 25 t Tie bar distance: 280x280 mm Platen size: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Original Demag tool crane: chain, electrically driven, 2 lifting speeds Dimensions: Weight: 2,600 kg Fjdpfx Apey Dp E Dolegb Length/Width/Height: 3.20x1.30x1.80 m Drive: Pump/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video showing the technical test of the selected machine or to take part in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, DEMAG dvigalo P400 P600 P1000 skupaj 24 delov - Precizni pogon FG - Glavni dvižni motor - Ohišje Fgsdpfov Uvubex Apljb - Boben za vrv - Vodilo vrvi - Zavora Dobro stanje, deloma odlično rabljeno do novo Info: 20.000 nadomestnih delov in komponent DEMAG na zalogi! skladišče DEMAG delov

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, številka stroja/vozila: MIKA Seilzüge, 1x Palan à câble Demag DR pour grue En raison des nombreuses demandes - le prix est indiqué par pièce !!!! Fgodpfx Apoy D D S Sjlsb 5 pièces disponibles, voir liste : 1x Palan à câble Demag EKDR-Pro3 NL1600Kg/1,6t, numéro de série 96656002, 4M, course de crochet/levée 12m !! - 2 brins, année 2015 1x Palan à câble Demag EKDR-3 NL1600Kg/1,6t, numéro de série 96656701, 2M, course de crochet/levée 12m !! - 2 brins, année 2015 1x Palan à câble Demag EKDR-3 NL1000Kg/1,0t, numéro de série 96305549, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 1x Palan à câble Demag EKDR-3 NL1000Kg/1,0t, numéro de série 96305548, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 1x Palan à câble Demag EKDR-3 NL1600Kg/1,6t, numéro de série 96305550, 4M, course de crochet/levée 12m !! - 2 brins, année 2012 Avec 2 vitesses de levage, hauteur de levage 12 m, écartement du palan réglable. Chacun avec boîtier de commande suspendu et fiche de raccordement pour l’alimentation électrique. Poids total env. 300 kg, alimentation 400V 50Hz. Très bon état, voir photos. Localisation de l’article : 75053 Gondelsheim Expédition possible, merci de préciser votre code postal pour un devis.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 203.229 km, vrsta goriva: dizel, barva: rumena, prva registracija: 10/2003, Leto izdelave: 2003, obratovalne ure: 24.503 h, Tehnične informacije Število cilindrov: 6 Mere Dimenzije (D x Š): 1027 x 255 cm Teže Lastna teža: 47.900 kg Nosilnost: 100 kg Skupna dovoljena masa: 48.000 kg Funkcionalnost Dolžina droga: 64 m CE oznaka: da Stanje Fgedpfxsydb Suo Apljb Tehnično stanje: zelo dobro Vizualno stanje: zelo dobro Identifikacija Registrska številka: BN-ZB-46

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 203.229 km, vrsta goriva: dizel, barva: rumena, prva registracija: 10/2003, Leto izdelave: 2003, obratovalne ure: 24.503 h, Tehnične informacije Število valjev: 6 Dimenzije Mere (D x Š): 1027 x 255 cm Teže Lastna teža: 47.900 kg Nosilnost: 100 kg Skupna dovoljena masa: 48.000 kg Funkcionalno Dolžina droga: 64 m CE označba: da Stanje Tehnično stanje: zelo dobro Fedoydcn Ropfx Aplegb Vizualno stanje: zelo dobro Finančne informacije Cena: po dogovoru Identifikacija Registrska številka: BN-ZB-46

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, vpenjalna sila: 1.500 kN, premer vijaka: 45 mm, injekcijska masa: 320 g, This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. Featuring a clamping force of 1500 kN and a screw diameter of 45 mm, it is suitable for processing various materials such as PA, PP, PE, and ABS. The machine offers a maximum pressure of 190 bar and a shot volume of 358 cm³. If you are looking for a high-quality injection moulding machine, we recommend considering the hydraulic DEMAG ERGOTECH 1500-840, which we have available for sale. Contact us for further details. • Shot volume: 358 cm³ • Processed materials: PA, PP, PE, ABS, etc. • Barrel temperature: up to 450 °C • Maximum pressure: 190 bar • Maximum flow rate (Qmax): 114 l/min • Power supply: 3x400 V • Frequency: 50 Hz • Total connected load: 78.3 A • Motor load: 41.0 A • Heating load: 37.3 A • Pump load: 41.0 A • Machine weight: 7.7 t • Year of manufacture: 1999 • Availability: mid-2026 Additional Equipment • Handling system: Wittmann linear robot • Wittmann W621 (1999) – X-stroke: 550 mm – Y-stroke: 1200 mm – Z-stroke: 2000 mm – Weight: 300 kg • Wittmann W633 – Robot no: W633 – X-stroke: 500 mm – Y-stroke: 1400 mm – Z-stroke: 2000 mm Fodpfsyyyn Uex Apljgb – Weight: 475 kg • Wittmann W743 – Robot no: W743 – X-stroke: 1200 mm – Y-stroke: 2000 mm – Z-stroke: 4000 mm – Weight: 835 kg – Connected load: 18 A / 12.5 kVA – Voltage: 400 V

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Namen uporabe: Gradbeništvo Pogon: Kolesa Lastna teža: 48.000 kg Dvižna zmogljivost: 220.000 kg Serijska številka: 82609 Stanje prednjih pnevmatik: 90 Stanje zadnjih pnevmatik: 90 Fodpjwk Aw Hsfx Aplsgb Transportne mere (D x Š x V): 15,3x3x4 Za več informacij kontaktirajte PFEIFER GROUP.

Stanje: pripravljen za uporabo (rabljen), DEMAG DH2100 H18 - 40t Fgodpfxsy D Iwxs Apleb

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Pogon: kolesni Lastna teža: 22.000 kg Dvižna zmogljivost: 30.000 kg Dimenzije tovornega prostora: 830 x 240 x 345 cm Serijska številka: 86584 Fgjdpfx Apowwqbyjlsb Stanje sprednjih pnevmatik: 70 Stanje zadnjih pnevmatik: 70 Za dodatne informacije se obrnite na skupino PFEIFER GROUP.

Stanje: rabljeno, Leto izdelave: 2002, Opportunity to acquire a DEMAG injection moulding machine with 1000T clamping force and 140,000 operating hours. Can be inspected in operation by appointment. Availability: 06/2026 Important: The information on this page has been obtained to the best of our knowledge and belief. This information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, this information is non-binding and does not constitute any contractual term. We recommend verifying all essential details during an inspection of the machine. To save unnecessary travel expenses for our clients, we usually recommend arranging a live video inspection. Clamping force: 1000 tons Opening stroke: 1250 mm Min. mould height: 500 mm Max. mould height: 1200 mm Tie bar distance: 1400 × 1120 mm Platen size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Overall length: 13,184 mm Overall width: 3,175 mm Overall height: 2,925 mm Max. pressure ({$P_{max}$}): 190 bar Max. flow rate ({$Q_{max}$}): 486 l/min System current: 409 A Heating current: 154 A Fgsdpfxeyq Dqgj Aplob

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 15.642 h, premer vijaka: 45 mm, skupna višina: 2.213 mm, skupna masa: 15.750 kg, This SUMITOMO SHI DEMAG Systec SP 350/720-840 was manufactured in 2015. It is a hydraulic injection molding machine, ideal for precise plastics processing. Take advantage of the opportunity to purchase this SUMITOMO SHI DEMAG Systec SP 350/720-840 hydraulic injection molding machine. Contact us for further information. Additional Equipment • Fanuc robot Fsdjx D Hntspfx Aplegb Machine Advantages Qualitative Machine Advantages • Process data acquisition, mold protection Technical Machine Advantages • Minimum mold height: 350 mm / maximum mold height: 745 mm • Electronic main connection: 3/400 V 50 Hz • Programmable process, high dynamic feed speed, hydraulic pressure-dependent holding pressure control, digital/wear-free position measuring system. Additional Information Standard Equipment: Support of the moving platen via linear guides/ Short/long stroke ejector/ Interface for external printer (hardcopy)/ Individual axis motion optimization (activeAdjust)/ Four-stage mold closing and four-stage mold opening process/ Increased pump drive power II (59.0 kW)/ Mains voltage 400 V ±10% / 50 Hz, 3-phase + N + PE/ Separate mains connections for drive/heating/ Color data display/ Reinforced oil cooler (cooling water supply up to 35 °C)/ Separate water connections for mold and machine cooling/ Basic version Europe/ Corrosion protection/ Paintwork: Jet black (RAL9005): machine bed with installations, lower control cabinet/ Signal white (RAL9003): clamping unit, injection unit, nozzle protection/ Signal white (RAL9003): fixed safety devices, upper control cabinet/ Signal white (RAL9003): safety doors/ Structured Surfaces: Elastic machine mounts/ Digital and wear-free position measuring system (ultrasonic/high-resolution encoder for injection, mold, and ejector movement)/ Mold connection dimensions Type E (according to EUROMAP March '96)/ Centering diameter fixed platen: 160 mm/ Centering diameter moving platen: 160 mm/ No side ejector plate/ Standard Mold Installation Height: Min: 350 mm/ Max: 745 mm/ Standard closing speed (movements only when safety door closed)/ Ejector with position control (P/F+V independently programmable, parallel to mold movement)/ Oil lubrication of toggle lever/ Injection unit/ Optional Equipment: Speed-controlled pump Servo Technology (activeDrive)/ Emergency stop switch on operator side/ Separate opener for fine filtering in bypass (activeCool&Clean)/ Socket 1 x Schuko (230V / 10A), switchable via main switch/ Socket IECEE 3Ph / 400V-16A, switchable via main switch/ Warning light/ Operation with safety door open (operator side)/ 6 pneumatic 5/2-way valves on moving platen (programmable)/ 6 pneumatic 5/2-way valves on fixed platen (programmable)/ Central maintenance unit for pneumatic valves/ Core pull 1-circuit via proportional valve (programmable, with check valves)/ Manual pressure relief for core pull 1-circuit/ Operator-side safety guarding extended (250 mm)/ Hot runner control 12 zones, integrated (2.75 kW)/ Pneumatic hot runner nozzle control (1x 5/2-way valve)/ Clamping force regulation/ Active mold protection via sensor when closing (activeQ)/ Manually adjustable monitoring switch for mold open position/ Central grease lubrication (manual)/ Material hopper for automatic filling/ Hopper shut-off with discharge option/

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has been in operation for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Please contact us for further information. Fgedpfx Aox D Nluopljb • The dosing unit (orange part) is not included. • Integrated country-specific socket combination • Can be switched off via the main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the movable mould mounting platen; • Programmable, supplied via central air connection • Includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point located outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via solenoid valve on the movable mould mounting platen; operation independent of clamping force (programmable); • With pilot-operated check valves to prevent core creep • Mould connection dimensions E (similar to Euromap March 96) • With side-mounted ejector plate, centering diameter of the fixed platen: 160 mm • Centering diameter of the moving platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes Fodpsyfq Aljfx Aplsgb • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)

Stanje: rabljeno, Funkcionalnost: nepreverjeno, Kontaktirajte nas za ponudbo Fgsdpfx Aeyyciheplsb

Stanje: rabljeno, Leto izdelave: 2001, Clamping force: 350 t Platen dimensions: 1040 x 950 mm Tie bar spacing: 710 x 630 mm Screw diameter: 50 mm Shot weight: 400 g Fgjdpeva Ht Sofx Aplob Shot volume: 442 cm³ Design: Horizontal Drive type: Hydraulic

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ERGOTECH 200 - 840, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, razmak između stupova: 560 mm, delovna prostornina: 442 cm³, minimalna višina orodja: 340 mm, širina plošče: 860 mm, višina plošče: 860 mm, moč črpalke: 30.000 W, Stroj je popolnoma delujoč, do konca je deloval na brizgalnem stroju. Fedpfx Aeyxn Tvoplogb

Stanje: rabljeno, Demag Ergotech 3300-840, stroj za brizganje plastike Demag, rabljeni stroj Proizvajalec: Demag, Sumitomo Model: Ergotech 3300-840 Skupne dimenzije (D x Š x V): 6,5 x 2,0 x 2,2 metra Lastna teža (brez olja): 13.800 kg TEHNIČNI PODATKI (GLEDE NA PREMER POLŽA) ----- Opis Enota "A" "B" "C" ----- Premer polža: [mm] 45 50 60 Razmerje L/D: [-] 20 20 20 Tlak vbrizgavanja (pri 400 °C): [bar] 2402 1946 1351 Fgjdpfx Ajx Sqi Hjplsb Volumen brizga: [cm3] 358 442 636 Teža brizga (PS): [g] 320 400 570 Moč grelca cilindra: [kW] 13,0 14,8 23,1 Vgrajena električna moč*: [kW] 58/68 60/70 68/78 ----- * Opomba: Vrednosti so višje pri električnem pogonu polža (WA). LASTNOSTI VBRIZGAVALNE ENOTE ----- Največji hod doziranja: 225 mm Maks. umik šobe: 470 mm Globina potopa šobe: 40 mm (SVO) / 30 mm (SPI) Sila pritiska šobe: 80 kN Električni pogon polža (WA): 20,5 kW Kapaciteta lijaka za material: 75 litrov SPLOŠNI IN HIDRAVLIČNI PODATKI ----- Kapaciteta rezervoarja za hidravlično olje: 700 litrov Moč črpalne enote: 45 / 55 kW Suh cikel (EUROMAP 6a): 1440 / 1600 h-1 Suh cikel (brez gibanja šobe): 1890 / 2100 h-1 Nenehna raven hrupa: 74 dB (A)

Leto izdelave: 2000, stanje: rabljeno, številka stroja/vozila: SIxx, Demag chain hoist crane lifting unit 5000Kg DKUN 20-2500 K V1 F4 Load capacity 5000 KG / 5t load / lifting capacity – 2-fall configuration Equipped with 2 lifting speeds, lifting height approx. 6 m Supplied without pendant control, complete with suspension eye and chain container Previously used as a spare hoisting unit for an overhead travelling crane Total weight approx. 120 kg, connection: 400V 50Hz Fgodpfxjrft Nzs Aplob Used condition Item location: 75053 Gondelsheim See pictures

Stanje: novo, Leto izdelave: 2022, moč: 10 kW (13,60 KM), največja hitrost vrtenja: 2.800 obr/min, Demag motor GCH140 D2 Stanje: novo, cena na povpraševanje ED 100 % 10,00 kW 31,5 A 2800 obr/min Fjdpoywi R Tjfx Aplegb 380V 50 Hz Zavora: 19 Nm

Leto izdelave: 1972, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: TRFA12+14x, 1x Demag friction wheel drive travel drive for wire rope hoist, crane, hoisting unit, P-puller, bridge crane, etc. Stock from years of manufacture 1971 + 1976: 14x RF310 – Motor type 16/6KF8-2 0.15-0.6 kW 5m/25m/min Price €2,850 each Fjdpot Rtm Njfx Aplegb 12x RF400 – Motor type 19/11KF12-2/2 0.18-1.1 kW 6.3m/40m/min Price €3,650 each With 2-speed operation Complete with tension clamps, motor/gear unit, and friction wheel We can also refurbish or manufacture new replacement friction wheels for defective or porous units - please inquire. Total weight approx. 100-150 kg, connection 380V 50Hz Used condition Item location: 75053 Gondelsheim See pictures

Leto izdelave: 1998, stanje: rabljeno, številka stroja/vozila: MBMAKZDoppel, 1 piece - Demag chain hoist crane lifting unit 250kg DKUND 2-250 K V1 with double chain, each with 125kg load capacity 10 units available 250kg / 0.25t load capacity / lifting capacity - single strand Distance between the two lifting chains variable: 20-120cm, lifting height approx. 3m Fgsdpfx Aetn Ritjpleb Without frame, only the chain hoist with both chain return pulleys incl. blue mounting plates is sold Total weight approx. 50kg, connection: 400V 50Hz TOP condition, fully functional. No worn-out or used-up unit! Connect and put into operation. Taken directly from ongoing operations Item location: 75053 Gondelsheim See pictures