Stroj za brizganje

Demag Ergotech Viva 800-400 (144) with Picker

Stanje: rabljeno, Leto izdelave: 1992, Clamping force 600 kN Clamping plate 460x460 mm Distance between columns 300x300 mm Machine weight approx. 4.5 t Clamping stroke 230 mm Ejector force 40 kN Ejector stroke 70 mm Mold height 120-350 mm Column diameter 56 mm Iedpfx Ahsfrvzvo Asik Casting force 55 kN Casting stroke 130 mm Casting plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 76, 121, 165 cm² Specific casting pressure 345, 280, 231 kp/cm² Associated parting surface 174, 214, 260 cm² Withdrawal stroke 150 mm Used die casting machine DAW 50 with SBC2 control unit for use with zinc alloys. Available from used machinery stock. The machine is equipped with an electric furnace by Rauch MO50E and a used pneumatic spraying device 401 by Oskar Frech. Manufacturer's recommendation is an overhaul at the refurbishing facility. The scope of the overhaul can be agreed upon.

Stanje: dober (rabljeno), Leto izdelave: 2000, Clamping force: 100 tons Tie bar spacing: 420 x 420 mm Platen size: 570 x 570 mm Ijdpfxorthkus Ah Aeik Screw diameter: 35 mm Injection volume: 230 cm³ Shot weight: 127 g New temperature control board ARB 777 (cost: €2,750)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, obratovalne ure: 67.092 h, BATTENFELD HM 10000-9200 Manufacturer: BATTENFELD Model: HM 10000-9200 Control system: UNILOG B4 Year of manufacture: 2003 Operating hours: 67,092 h Technical Data – Clamping Unit Clamping force: 10,000 kN Tie bar spacing (H x V): 1,120 x 1,400 mm Platen size (H x V): 1,960 x 1,690 mm Minimum mold height: 550 mm Maximum mold height: 1,020 mm Max. platen distance: 2,120 mm Opening stroke: 1,100 mm Ejector stroke: 300 mm Ejector force: 118 kN Movable platen centering diameter: 250 mm Fixed platen centering diameter: 315 mm Technical Data – Injection Unit Screw diameter: 120 mm Shot volume: 5,655 ccm Injection pressure: 1,632 bar Screw L/D ratio: 22 l/d Screw stroke: 500 mm Screw speed: 130 rpm Screw torque: 11,370 Nm Iijdpfx Ahsrdyq Rj Ajk Plasticizing rate: 144 g/s PS Free-flow injection rate: 1,144 g/s PS Number of heating zones: 8 Nozzle stroke: 700 mm Dimensions & Weight Machine dimensions (LxWxH): 11.6 m x 2.9 m x 2.5 m Total weight: 76,500 kg Equipment Display language: German CompactFlash drive Hydraulic core pull 4x Leveling elements EUROMAP 12 interface Interface for temperature control unit Enlarged oil cooler Mold heating 16x

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Clamping force: 130 tons Screw diameter: 40 mm Operating hours: 77,890 h Tie bar distance: 420 x 420 mm Iiodpfx Ahjd Tnbhj Aek

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Krauss Maffei Injection Moulding Machine KM 300-1000 C2 Year of manufacture: 2006 Clamping unit: Clamping force: 3000 kN Maximum mould opening force: 160 kN Movable platen shifting force (Opening): 86 kN Movable platen shifting force (Closing): 68 kN Mould platen size (H x V): 995 mm x 1050 mm Tie bar spacing (H x V): 630 mm x 630 mm Mould opening stroke: 820 mm Minimum mould height: 330 mm Maximum daylight: 1150 mm Injection unit: Iederbhhhepfx Ah Aoik Screw diameter: 55 mm Ls/D ratio: 20 Injection pressure: 1904 bar Injection volume: 523 ccm Shot weight, PS: 476 g Injection rate: 428 ccm/s General data: Dimensions (L x W x H) m: 5.97 x 2.04 x 2.36 Weight t: 12.5

Stanje: dober (rabljeno), Leto izdelave: 2003, obratovalne ure: 106.864 h, vpenjalna sila: 1.300 kN, premer vijaka: 35 mm, The machine has been very well maintained, with service and maintenance always carried out on time. Good condition, fully functional Still in operation until week 11 Additional service reports and documents available Technical Specifications: Year of manufacture: 2003 Automatic operation: 106,864 hours Clamping force: 1,300 kN Screw diameter: 35 mm Screw stroke: 180 mm Injection force: 50 kN Opening stroke: 500 mm Distance between tie bars: 750 mm Ejector force: 40 kN Advance Package - VE561/20 LGS Position-controlled screw with control valve at the injection unit for particularly high dynamics and reproducibility of the injection process. The back pressure is regulated, and the nozzle contact force is manually adjustable. - VE 557/00 AES Energy-saving system for automatic power optimization, enabling corresponding energy savings by continuously adjusting the pump drive speed to the power requirements of each injection cycle. - VE 460/00 ED Electromechanical dosing drive via a speed-controlled three-phase asynchronous motor. This improves productivity through simultaneous movements, gentler material preparation, and further energy savings compared to hydraulic dosing. On request and at an additional charge, loading and transport (Europe-wide) can be organized. Prices plus VAT Iodpfx Aerp Dyrsh Aeik Inspection by appointment possible. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For additional information or to get in touch, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Engel ES 330/80 HLS Schließkraft 80 Tonnen Baujahr 1998 Schneckendurchmesser 35 mm Iodpfepdr Aisx Ah Aeik Hubvolumen 154 cm³ Vergrößerte Aufspannplatte: 660 x 560 mm Minimale Werkzeug-Einbauhöhe: 200 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Krauss Maffei KM 250-900B Clamping force: 250 tonnes Year of manufacture: 1987 Shot weight: 470 g Tie bar spacing: 630 x 560 mm Iisdpfxjfp U Hvj Ah Aek

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Engel ES 650/175 HL-V Isdpfxepdrzhs Ah Ajik Clamping force: 175 tons Year of manufacture: 1999 Screw diameter: 45 mm Shot volume: 318 cm³ Enlarged platen dimensions: 820 x 750 mm Minimum mold installation height: 250 mm

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), Five identical Arburg injection moulding machines are available. Clamping force: 800 kN, tie bar spacing: 420 mm x 420 mm, installation height: 250 mm, platen distance: 700 mm, nozzle diameter: 45 mm, weight: approx. 3,800 kg, control system: Selogica 3.020. All machines are supplied with temperature control unit and conveyor belt. Documentation is available. The machines are in storage. On-site inspection is possible. Iisdjviv Dfepfx Ah Ajk