Stroj za brizganje

Demag Ergotech Extra 80-430

Stanje: dober (rabljeno), Leto izdelave: 1998, Battenfeld 600/200 CDC Unilog 4000 Clamping force: 60 tons Year of manufacture: 1997 Dodeg Emvhepfx Aphokt Screw diameter: 30 mm Shot weight: approx. 90 g

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Dsdpsh Nypfofx Aphekt

Leto izdelave: 1972, stanje: pripravljen za uporabo (rabljen), Razdalja med vretenom in mizo min./maks.: 81mm/481mm, razdalja med sredinama vretena in nasprotnega držala: 195mm, rotacija vretenaste glave: 360°, premer rezkalnega vretena: 70mm, nastavitev vretena: 100mm, nastavitev vretenastega ležišča: 300mm, dimenzije mize X/Y: 480mm/820mm, hod X/Y/Z: 500mm/200mm/400mm, maks. dolžina obdelovanca: 400mm, hitrost vretena: 1600 vrt/min, pomik X/Y: 500mm/min, pomik Z: 250mm/min, vrtljivost vretenaste glave: +/-30°, mere stroja X/Y/Z: ca. 1600mm/2550mm/1700mm, teža: ca. 2300kg. Stroj je bil konec leta 2025 električno pregledan in ugotovljena je bila okvara stikala za sili. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Dkedsx S Rcmopfx Aphjt

Stanje: dober (rabljeno), Leto izdelave: 2001, - Manufacturer: IDE - Model: 45/4 Dkodpfxsuhpiye Aphot - Year of manufacture: 2001 - Single-screw extruder Ø45mm 25 L/D - Analog control on the right - Screw profile: PVC - 4 heating zones on the barrel - 4 heating zones for tooling - Motor power: 8.5 kW - Throughput up to 60 kg/h Good overall condition, very clean machine

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), Višina konice: 280 mm, razdalja med konicama: 2000 mm, premer struženja nad posteljo/na vozičku: 570 mm/365 mm, vretenina odprtina: 62 mm, število vrtljajev: 2500 obr/min, maksimalna teža obdelovanca: 1000 kg, širina postelje: 360 mm. Dimenzije stroja X/Y/Z: pribl. 4000 mm/2250 mm/2000 mm, teža: pribl. 5500 kg, krmilje: Siemens. Ogled na lokaciji je možen. Dkjdpjxq Eyusfx Aphst

Stanje: rabljeno, Leto izdelave: 1965, x-travel 700 mm y-travel 350 mm z-travel 450 mm Clamping surface of table: 940 x 510 mm Spindle taper: SK 40 Spindle speeds: 32 - 1600 rpm Feeds – longitudinal & cross: 8 - 400 mm/min Dkedsvzhh Tspfx Aphot Feeds – vertical: 4 - 200 mm/min Total power requirement: 4.5 kW Machine dimensions (L x W x H): 1.85 x 1.62 x 1.83 m Accessories: swivel-type vertical head with extendable quill, universal table, counter bearing, coolant device

Leto izdelave: 2000, stanje: Okvarjen nosilec rezervnih delov (rabljen), Yaskawa Motoman UP130 6-axis robot with Motoman Xrc controller Robot: Motoman YR-UP130-A00 Handheld controller: Yasnac Mrc Year of manufacture: 2000 (June) Robot controllers: Motoman Xrc ERCS UP130-RE00 Handheld controller: Yasnac Mrc Year of manufacture: 2001 - Number of axes: 6 - Payload capacity: 130 kg Dedpfxofhkfis Aphskt - Arm reach: 2650 mm - Repeatability: 0.2 mm - Robot weight: 1300 kg - Controller: Xrc - Cables, plugs, connectors Structure: Vertically articulated type Axis specifications: S-axis: 130°/s (2.27 rad/s) L-axis: 130°/s (2.27 rad/s) U-axis: 130°/s (2.27 rad/s) R-axis: 215°/s (3.75 rad/s) B-axis: 180°/s (3.14 rad/s) T-axis: 300°/s (5.24 rad/s) Range of motion: S-axis: 180° L-axis: +76° to -60° U-axis: +240° to -130° R-axis: 360° B-axis: 130° T-axis: 360° Purchase, acquisition, and asset management of industrial plants and machinery. Wide range of used machinery and industrial equipment.

Stanje: pripravljen za uporabo (rabljen), Two identical machines are available. Connected load: 32 kW, length: 3,500 mm, width: 2,400 mm, height: 2,400 mm, weight: 3 t. On-site inspection is possible. Dodpfjuyk Rljx Aphekt

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Arburg injection molding machine from 2000. 130 tons clamping force. The machine is delivered fully reconditioned at our facility in Heras (Cantabria). New seals installed in the clamping unit. We can demonstrate the machine in operation. Technical Details CLAMPING FORCE: 1300 kN PLATEN DIMENSIONS: 660 x 840 mm OPENING STROKE: 575 mm Dksdpfx Ajrxtpdjphot MAXIMUM DISTANCE BETWEEN PLATENS: 800/850 mm DISTANCE BETWEEN TIE BARS: 420 x 420 / 470 x 470 mm SCREW DIAMETER: 50 mm INJECTION VOLUME: 353 cm³ INJECTION SHOT WEIGHT: 117 g YEAR OF MANUFACTURE: 2000 INJECTION PRESSURE: 2500 bar

Stanje: rabljeno, Leto izdelave: 2004, Wire EDM machines / EDM Travel X: 350 mm Travel Y: 250 mm Travel Z: 256 mm Dkedpfx Aowf I Imephot Max. workpiece size X: 750 mm Max. workpiece size Y: 550 mm Max. workpiece size Z: 250 mm Max. workpiece weight: 200 kg Cutting in a water bath Chiller The machine has been serviced annually by the manufacturer.