Demag nakup rabljenega (510)

Stanje: pripravljen za uporabo (rabljen), Approx. 120 units = 480 linear meters of safety conductor lines Number of conductors/poles: 5 Standard length: 4 m Conductor rail cross-section: 10 mm² Kwodpfx Ajd Hurbsdkew For mains voltage up to: 500 V Continuous duty current rating (100% duty cycle): 60 A Weight per meter: 2.1 kg

Stanje: dober (rabljeno), Leto izdelave: 2014, Proizvajalec: DEMAG Nosilnost: 860 kg + 630 kg (opremljeno z dvema dvigali) Točne tehnične mere so prikazane na slikah. Kwsdpfoyu R Dzex Adksw Tir za dvigalo je mogoče podaljšati s strukturami in nogami, prikazanimi na slikah, vendar pa so za podaljšanje potrebni tudi drugi elementi tira, ki niso na voljo!!

Stanje: rabljeno, Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, moč: 0,75 kW (1,02 KM), vrsta zaščite (IP koda): IP55, Ponujamo rabljeno postajo za praznjenje big bagov Mannesmann Demag 500-K-V1, letnik 1994. Dovoljena nosilnost: 0,5 t Letnik izdelave: 1994 Višina dviga kljuke: 10 m Dimenzija verige: 5,8 x 15,2 mm Skupina verige: 10 H Hitrost dviga pod obremenitvijo: 8 m/min Hitrost dviga v prostem teku: 4 m/min Nazivna moč motorja: 0,75 kW Nazivni tok: 2,3 A Nazivno število vrtljajev motorja: 2680 1/min Stopnja zaščite: IP55 Za dodatna vprašanja ali informacije nam pišite ali nas pokličite. Kjdpeyv Uz Uofx Adkoww

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, pomik po osi Z: 1.500 mm, Oprema: dokumentacija / priročnik, Število osi: 3 Doseg: 1500 mm Kwjdpfx Ajyfhw Hodkew Nosilnost: 5 kg X=420 mm Y=1200 mm Z=1500 mm

Stanje: dober (rabljeno), Leto izdelave: 2026, Skupaj 30 kos verižnih dvigal iz razgradnje podjetja naprodaj. Nosilnost 500 - 1.400 kg, različni modeli. Kwjdpfxoyplu Dj Adkow Vseh 30 kos je delujočih, dodatno 2 kosa za rezervne dele. Vključno s 5 izvlečnimi vozički.

Leto izdelave: 1978, stanje: dober (rabljeno), številka stroja/vozila: 2252928,

Leto izdelave: 1991, stanje: rabljeno, številka stroja/vozila: 149125/95, Max. operating pressure: 8 bar Delivery rate: 2.51 m³/min Drive motor: 380/660 V, 15 kW Space requirements: 820 x 950 x 1200 mm (H) Weight: 360 kg Air receiver, manufacturer KAESER, year of manufacture: 1999 Capacity: 1000 l Max. operating pressure: 11 bar Space requirements: 800 mm diameter x 2300 mm (H) Kwedpfx Asby Hpbodkow

Stanje: rabljeno, Električni verižni dvig, elektro dvigalo, žerjav DEMAG tip PKVUN1 V1 Tovarna št. 63409464 Leto izdelave 1993 Nosilnost 250 kg Višina dviga kljuke 5 metrov Razdalja od obešala do tovorne kljuke 400 mm Glavna hitrost dviga 4 m/min. Fina hitrost dviga 1 m/min. Dolžina kabla upravljalne enote cca 1,7 metra Kodpfxoyv H Efj Adkoww 2 nosilni verigi = 250 kg - Nujni izklop Mrežno napajanje 380 V, 50 Hz Teža 20 kg Dobro stanje

Stanje: rabljeno, Tehnične podrobnosti: Nosilnost: 1,25 t Dvig: 4000 mm Razpon: 3000 mm Maks. kot vrtenja: pribl. 300 stopinj Skupna višina stebra: 4020 mm Hitrosti dviga: 8/2 m/min Pot kljuke: 4000 mm Premer stebra: 160 mm Teža: 164 kg Dimenzije D x Š x V: ležeče 4,2 x 3,5 x 0,2 m Kwjdpoyuyiasfx Adkjw Tip žerjava: St stebrno vrtljiv žerjav (KBK lahek žerjavni sistem) Proizvajalec: Demag Cranes & Components GmbH Izvedba: Steber z KBK votlim profiliranim nosilcem Uporaba: Manipulacija materiala na montažnih in delovnih mestih

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Kedjyvq Nbopfx Adkeww Ejector: hydraulic Clamping unit design: toggle Control system: NC5 Additional equipment: Euromap 67 Robot interface Controller with pneumatic valve Controller for 5 hot runners Injection unit hardened – bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 Robot Year of manufacture: 2016 6-axis robot: 5 axes powered by electric servo motors: X, Y-telescopic, Z, B, C Travel distances: X-1200, Y-2400, Z-4000 mm Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt can be purchased at additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are test-run by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR833 robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Shot volume: 1212 cm³ Kodpoyvq Iqofx Adkoww Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping mechanism: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface Air valves x 5 Hydraulic core pull with proportional valve control x 1 Hot runner control x 5 Hardened injection unit - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 variable output hydraulic pumps Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel paths on axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt and protective enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Sumitomo Demag Systec 100/420-310 with Sepro SR SDR11 S3 TRANS Robot / Hybrid Machine Year of manufacture: 2013 Injection unit: Screw diameter: 35 mm Shot weight: 149 g Injection pressure: 2024 bar Metering volume: 168 ccm Clamping unit: Clamping force: 100 t Tie bar spacing: 420x420 mm Platen size: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving, and very quiet operation Operating hours: approx. 38,000 h in automatic mode Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Main drive motor – servomotor driven with inverter – energy saving Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Sepro SR SDR11 S3 TRANS Year of manufacture: 2013 5-axis robot: 3 axes driven by servomotors (electric); A and C axes (rotation) – pneumatic Touch control panel Safety package for robot Robot with adapter, protective enclosure Robot available for additional price Kedpfsyvq H Tjx Adkoww Dimensions: Weight: 4,400 kg Length/Width/Height: 4.20x1.40x2.00 m All machines offered are started up by our service technicians prior to sale. A video of the technical tests for the selected machine can be provided or you may participate in live technical demonstrations at our facility in Łódź. Price: Upon request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Demag Ergotech System 80/420-430 Kwjdpfsyvqpbex Adkjw Year of manufacture: 2006 Injection unit: Screw diameter: 40 mm Shot weight: 205 g Injection pressure: 2,020 bar Injection volume: 231 cc Clamping unit: Clamping force: 80 t Tie bar spacing: 420x420 mm Platen size: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control system: NC4 Additional equipment: Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 3 Control with hot runner support Hardened injection unit – bimetallic Built-in printer Option to change screw diameter Dimensions: Weight: 4,100 kg Length/Width/Height: 4.10x1.40x1.90 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Sumitomo Demag IntElekt 50/370-200 / Elektromos fröccsöntő gép Gyártási év: 2009 Fröccsegység: Csigaátmérő: 35 mm Fröccstömeg: 128 g Fröccsnyomás: 1466 bar Adagolótérfogat: 144 cm³ Záróegység: Záróerő: 50 t Oszloptávolság: 370x370 mm Felfogólap méret: 520x570 mm Kidobó: elektromos Zárórendszer: könyökkaros Vezérlés: NC5 - Érintőképernyő További felszereltség: Elektromos gép: nagy fordulatszámú, energiatakarékos és nagyon csendes Euromap 67 Robot interfész Légszelep x 4 Forrócsatorna vezérlés Edzett (bimetál) fröccsegység Központi kenés A csigaátmérő cseréje lehetséges Kwjdpfoyvqn Dex Adkjw Méretek: Tömeg: 4750 kg Hossz/szélesség/magasság: 4,20x1,26x1,84 m Meghajtás: Fűtőteljesítmény: 5,7 kW Minden eladásra kínált gépet szerviztechnikusaink indítanak el értékesítés előtt. Lehetőség van videót kapni a kiválasztott gép műszaki tesztjéről, vagy részt venni élő technikai teszten łódzi telephelyünkön. Ár: Kérésre

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Demag Ergotech Compact 250-80 Year of manufacture: 1995 Injection Unit: Screw diameter: 18 mm Shot weight: 20 g Injection pressure: 2,400 bar Plasticizing volume: 22.8 ccm Clamping Unit: Clamping force: 25 t Tie bar distance: 280x280 mm Platen size: 410x410 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Air valve x 2 Hydraulic core pull x 1 Injection unit hardened – bimetallic Original Demag tool crane: chain, electrically driven, 2 lifting speeds Dimensions: Weight: 2,600 kg Length/Width/Height: 3.20x1.30x1.80 m Drive: Pump/motor: 7.5 kW Heating capacity: 3.7 kW Total power: 11.2 kW All machines offered are started up by our service technicians prior to sale. Kodpfxjyvqnws Adkjww It is possible to receive a video showing the technical test of the selected machine or to take part in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004, številka stroja/vozila: LS137, Tehnični podatki: 1x Demag KBK 2 stebrni vrtljivi žerjav NL 500KG z Demag DK verižnim vitlom Kwjdjywfmwopfx Adkew Nosilnost pri polnem iztegu 500KG Višina: cca 4,05 m Spodnji rob nosilca: cca 3,55 m Izteg: 4 m Višina kavlja: cca 2,8 m Skupna teža cca 1000KG vključno z osnovno ploščo 115x115 cm z 500KG Demag DK verižnim vitlom vklj. zatič, kabelski verižnik, voziček, zaključna kapica itd. Območje vrtenja 300°, priklop na 400V 16A Žerjav je razstavljen in takoj na voljo Lokacija artikla: 75053 Gondelsheim Na voljo so tudi drugi žerjavi, nosilnost 80–5000 kg, povprašajte Glejte slike Pošiljanje preko špedicije ali osebni prevzem samo po dogovoru o terminu

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1986, številka stroja/vozila: LS14 + RIO RES, Tehnični podatki: 1x Demag KBK 2 stebrno vrtljivi žerjav, nosilnost 500 kg, z verižnim dvigalom Demag PK Žerjav je na voljo skupaj 4x! Nosilnost pri polnem iztegu: 500 kg Višina: cca 3,55 m Spodnji rob izteznega nosilca: cca 3 m Kwjdpfjywfl Tex Adksw Izteg: 3 m Višina kljuke: cca 2,6 m Skupna teža: cca 300 kg Z 500 kg verižnim dvigalom Demag PK Vključuje zatič, kabelsko verigo, voziček, končni pokrov itd. Območje vrtenja 300°, priklop na 400 V 16 A Žerjav je demontiran in takoj na voljo Lokacija artikla: 75053 Gondelsheim Na voljo so tudi drugi žerjavi, nosilnost 80-5000 kg, prosim povprašajte Glejte slike Pošiljanje s špedicijo ali osebni prevzem le po predhodnem dogovoru

Stanje: rabljeno, Leto izdelave: 2002, Opportunity to acquire a DEMAG injection moulding machine with 1000T clamping force and 140,000 operating hours. Can be inspected in operation by appointment. Availability: 06/2026 Important: The information on this page has been obtained to the best of our knowledge and belief. This information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, this information is non-binding and does not constitute any contractual term. We recommend verifying all essential details during an inspection of the machine. To save unnecessary travel expenses for our clients, we usually recommend arranging a live video inspection. Ksdpsyq Dqgsfx Adkjww Clamping force: 1000 tons Opening stroke: 1250 mm Min. mould height: 500 mm Max. mould height: 1200 mm Tie bar distance: 1400 × 1120 mm Platen size: 1950 × 1670 mm Screw diameter: 80–110 mm Injection volume: ± 2000–3800 cm³ Shot weight (PS): ± 1800–3400 g Injection pressure: up to ≈2380 bar Total weight: 72.5 tons (72,500 kg) Overall length: 13,184 mm Overall width: 3,175 mm Overall height: 2,925 mm Max. pressure ({$P_{max}$}): 190 bar Max. flow rate ({$Q_{max}$}): 486 l/min System current: 409 A Heating current: 154 A

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1986, številka stroja/vozila: MIKA-CN, Tehnične podatke: 1x Demag KBK 1 stebrno vrtljivi žerjav NL 125KG z verižnim vitlom Demag DC (125 kg - letnik 2007) Nosilnost pri polnem iztegu: 125KG Višina: cca 3,05 m Višina pod konzolo: cca 2,55 m Iztez: 3 m Višina kljuke: cca 2,15 m Skupna teža: cca 300KG Kwjdpfxjyu E I Ie Adkow Z verižnim vitlom Demag DC 125KG Vključuje: zatič, vodilo za kable, voziček, zaključni pokrov itd. Območje vrtenja 300°, priklop na 400V 16A Žerjav je demontiran in takoj na voljo Lokacija artikla: 75053 Gondelsheim Na voljo so tudi drugi žerjavi, nosilnosti 80-5000Kg, povprašajte za več informacij Glejte slike Dostava s špedicijo ali osebni prevzem le po dogovoru o terminu

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Leto izdelave: 2019, obratovalne ure: 17.716 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Širina: 1920 cm Globina: 7750 cm Teža stroja: 26.210 kg Kwedpfx Adex D Nx Ijkjw Višina: 2410 mm Ta električni stroj za brizganje SUMITOMO SHI DEMAG El-Exis SP 350/820-920 je bil izdelan leta 2019. Robusten električni stroj za brizganje s premerom polža 40 mm in zapiralno silo 3.500 kN. Deloval je 17.716 ur in izvedel 12.440.761 ciklov, kar omogoča obsežne proizvodne zmogljivosti. Razmislite o nakupu električnega stroja za brizganje SUMITOMO SHI DEMAG El-Exis SP 350/820-920. Za več informacij nas kontaktirajte. Vrsta uporabe Brizganje plastike

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 96.986 h, vpenjalna sila: 600 kN, premer vijaka: 30 mm, This hydraulic injection moulding machine, model DEMAG ET60-200 concept, was manufactured in 2003. It features a clamping force of 600 kN and a maximum mould weight of 580 kg. The machine is equipped with a robust injection unit featuring a screw diameter of 30 mm and an injection pressure of 1900 bar. Take advantage of this opportunity to purchase the DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further information. • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mould installation height: 210 mm • Opening stroke: 400 mm • Max. mould weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on ejector side/ES) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Shot volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Armoured/wear-resistant injection unit: Yes Kwedpfoyg Nfuex Adkow • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 tonnes Additional equipment • Robot / parts removal device: W621-1381 • Strokes: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: integrated 7-zone control • Tool sensors: Kistler (p=1/t=0)