Stroj za brizganje

DEMAG System 1300/1500-11500

Stanje: dober (rabljeno), Leto izdelave: 2004, Peripheral devices Brand: Tool-Temp Model: TT-157E Pedpfxeh Hbpwj Anporc Available: 14 units

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2198535, skupna masa: 2.409 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 600 l, barva: rdeča, moč: 160 kW (217,54 KM), izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, vrsta izhodnega toka: trifazni, nazivna moč: 160 kW (217,54 KM), nazivna (navidezna) moč: 220 kVA, neprekinjena moč: 160 kW (217,54 KM), neprekinjena (navidezna) moč: 220 kVA, skupna dolžina: 3.300 mm, skupna širina: 1.200 mm, skupna višina: 1.970 mm, največja hitrost vrtenja: 1.500 obr/min, proizvajalec motorjev: FPT/Iveco, vrsta hlajenja: voda, poraba goriva (kombinirana): 42,1 l/100 km, poraba goriva (mestna vožnja): 24 l/100 km, poraba goriva (izven mesta): 32,87 l/100 km, gorivo: dizel, kapaciteta rezervoarja za gorivo: 600 l, kapaciteta baterije: 100 Ah, napetost baterije: 12 V, vhodna napetost: 12 V, vhodna frekvenca: 50 Hz, vhodni tok: 32 A, obratovalna temperatura: 25 °C, temperatura okolja (min.): −25 °C, okoljska temperatura (maks.): 45 °C, višina krmilne omare: 1.970 mm, dolžina elektro omare: 3.300 mm, širina krmilne omare: 1.200 mm, vrsta zaščite (IP koda): IP65, vrtljajska hitrost (min.): 1.500 obr/min, temperatura: 25 °C, vrsta vhodnega toka: trifazni, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, mobilni rezervoar za dizel, The Bredenoord 200 KVA generator is a reliable and versatile solution for temporary and long-term power requirements in a wide range of environments. This genset is ideal for mobile use and complies with Stage V emission standards. The efficient FPT/Iveco engine, combined with a Stamford generator, delivers outstanding performance with low operating costs. The generator is housed in a sound-insulated enclosure that ensures minimal noise emissions, making it perfect for use in noise-sensitive environments (super silent). The enclosure features thick, oil-resistant sound insulation and external sockets with circuit breakers for added safety. With a 600-litre fuel tank, the generator offers an autonomy of up to 14 hours under continuous load. The system operates on diesel, HVO or GTL fuel, providing flexible fuel options. Technical Specifications: - Model: Bredenoord 200 KVA - Nominal Power: 220 KVA - Maximum Power: 220 KVA - Engine: FPT/Iveco NEF67TM7 - Generator: Stamford brushless alternator (AVR) - Output: 220 KVA - Voltage: 230/400 V, 50 Hz - Speed: 1500 rpm - Noise level: 68 dB(A) at 7 metres - Fuel tank: 600 litres - Autonomy: - 100% PRP: 14 hours - 70% PRP: 18 hours - Engine power: 160 KW - Battery charger and engine pre-heater: Standard - Control panel: Comap MRS16 (auto start/stop) - Dimensions (L x W x H): 3.30 m x 1.20 m x 1.97 m - Weight: 2409 kg - Emission class: Stage V Fuel consumption: - 100% PRP: 42.1 L/h - 70% PRP: 32.87 L/h - 50% PRP: 24 L/h Options: - Engine pre-heater - Battery charger Psdpfewf Nkcex Anpsrc - 3-way fuel valve - XXL fuel tank Sound attenuation: The generator is designed with optimised air intakes and special insulation materials to minimise noise. The sound insulation is reinforced with wool of varying thickness to dampen sound across a wide frequency spectrum, making it ideal for use in noise-sensitive areas. Durability: The enclosure is corrosion-resistant thanks to a coating tested for more than 2000 hours (C5I-H), guaranteeing a long service life even in the most challenging conditions. Safety: The generator is equipped with reinforced locks and stainless steel hinges. The doors are designed with a 20-degree bevel to prevent water accumulation and minimise oxidation. Transport and Handling: The generator is easy to move thanks to reinforced lifting eyes and steel beams, ensuring straightforward transport on construction sites. The design provides a stable and secure relocation without risk of damage. Customisation: The Bredenoord 200 KVA generator is available in various outputs from 20 KVA to 600 KVA. Customer-specific adaptations are possible, allowing the generator to be tailored to specific requirements and applications. Certifications: - CE certified - Made in Europe Fields of Application: The generator is suitable for various sectors, including construction, industry and other areas where reliable and efficient power supply is required.

Stanje: novo, Leto izdelave: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Top tool: 1260 Top Tool 85° Bottom tool: 50, 35, 22, 16 Distance between uprights (B): 2550 mm Approach speed: 130 mm/s Working speed: 8 mm/s Return speed: 120 mm/s Crowning: Manual (CNC-motorized available at extra cost) X-axis travel: 750 mm X-axis speed: 250 mm/s Backgauge fingers: 2 pcs Front support arms: 2 pcs Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Throat depth (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X), can be expanded with optional R+Z axes Eurostamp 2067 bottom tool (V:50, 35, 22, 16) Eurostamp 1260 top tool 85° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X:750 mm) Adjustable backgauge fingers Selectable inch and metric system Ground and chrome-plated cylinders Swiveling control panel Foot pedal with anti-panic stop & emergency shut-off Side safety guards (secured with limit switches) Podpfx Ansgu N Alsporc Light curtain at rear of machine (900 mm) DSP laser finger protection system at front (CE) BOSCH/REXROTH or HOERBIGER/HAWE hydraulic system BOSCH/REXROTH or ECKERLE hydraulic pump Movable front support arms (2 pcs) Electronic components from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Paint finish: RAL 7035, RAL 5015 Optional, available at extra cost: - CNC-controlled R-axis (250 mm) - CNC-motorized crowning - Servo motor drive for backgauge system for X+R axis (Mitsubishi) - Special paint color per customer request Documentation in German or English CE conformity

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Technical data: Maximum clamping force: 3,500 kN Maximum holding force: 3,850 kN Opening stroke: 725 mm Minimum mould installation height: 400 mm Maximum mould installation height: 900 mm (extended) Clamping platen (H x V): 1,168 x 1,144 mm Clear tie bar distance (width x height): 830 x 830 mm Maximum mould weight: 6,600 kg Maximum weight on movable clamping platen: 3,800 kg Maximum weight on fixed clamping platen: 5,100 kg Ejector stroke: 250 mm Increased ejector force: 100 kN Maximum ejector speed: 270 mm Predpjy Hmfysfx Anpsc Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle stroke: 520 mm Nozzle immersion depth: 20 mm Back pressure programmable over dosing stroke Installed cylinder heating: 23.1 kW Material hopper volume: 110 l Weight: approx. 21 t Accessories: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Model: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demoulding stroke Y-axis: 900 mm Vertical demoulding stroke X-axis: 1,800 mm Robot console on fixed clamping platen Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell integration (special option includes): • Plastification cylinder with pneumatic shut-off nozzle without mixing element and without non-return valve; • Interface (communication and emergency-stop interface); • Software including functional screens for MuCell control; • Adapted nozzle chamber guard; • Position-controlled high-speed screw (analogous to ZE388) Conveyor belt: Width: 870 mm Useful width: 800 mm Length: 3,500 mm Height: 880-1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection moulding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 9.300 h, nosilnost: 3.500 kg, dvižna višina: 4.700 mm, prosto dvigovanje: 1.500 mm, težišče tovora: 500 mm, vrsta goriva: električni, tip droga: triplex, gradbena višina: 2.200 mm, vrsta prenosa: samodejen, napetost baterije: 80 V, teža baterije: 1.580 kg, dolžina vilic: 1.150 mm, stanje pnevmatik: 95 odstotek, Tip prednje pnevmatike: superelastične pnevmatike (črne), tip zadnje pnevmatike: superelastične pnevmatike (črne), lastna masa: 6.400 kg, skupna višina: 2.200 mm, Oprema: bočni pomik, kabina, osvetlitev, popolna servisna zgodovina, spojka prikolice, vilice za palete, Prodajam rabljeni Toyota električni viličar tip 8FBMT 35, letnik 2018, s triplex prostodvižnim drogom! Višina gradnje: 2,2 m Višina dviga: 4,7 m Nosilnost: 3500 kg Polne gumene pnevmatike 95% Hidravlični bočni pomik Dolžina vilic: 115 cm Polnilec je vključen Na viličarju sta bila že obnovljena oba pogonska motorja in zadnja os, prav tako je bila že zamenjana baterija! Viličar je takoj na voljo! Takoj pripravljen za uporabo! Viličarja si lahko ogledate in ga preizkusite pri nas! Podpsxzr E Eefx Anporc Prevoz lahko organiziramo po želji!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2006, obratovalne ure: 33.107 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Vrhunski stroj iz proizvodnje v čistem prostoru (farmacevtska industrija) Stroj si lahko po dogovoru ogledate v obratovanju. Tehnični podatki Proizvajalec: Engel Tip: V 330H/80V/130 Combi 2-barvni stroj z vrtljivim stolom Serijska številka: 162036 Letnik: 2006 Delovnih ur: 33107 ur Nadzor: CC 200 Dodatna oprema - z vrtljivim stolom premera 820 mm - z robotom GEKU SR 500 ST, gib: x=600 y=1400 z=2500 mm - samo 33.107 delovnih ur - zaščitna ograja/varnostna kletka - horizontalni transportni trak Pedpoub Umqofx Anporc - komaj zaznavne poškodbe laka / skoraj popolno vizualno stanje - v celoti deluje Dimenzije (D/Š/V): glejte risbo Teža: 10600 kg Delovanje: v celoti delujoč Stanje: odlično Zapiralna enota Vrsta zapiralne enote: hidravlična Zapiralna sila: 1300 kN / 130 ton Razdalja med stebri: brez stebrov Pot zapiranja: 606 mm Višina vstavljanja orodja: 250 mm Centriranje: 125 mm Maksimalna razdalja med ploščami: 850 mm Velikost plošče: 750 mm / 850 mm (V x Š) Brizgalna enota 2K Premer vijačnega valja: 25 / 22 mm Brizgalna teža: 72/ 35 g Brizgalni tlak: 2391/ 2066 bar Brizgalna prostornina: 79 / 38 cm³ Pot izmeta / sila: 61 kN / 100 mm Podrobnosti o robotu GEKU SR 500 ST Nadzor: Simotion Os X: 600 mm Os Y: 1400 mm, vertikalna Os Z: 2500 mm, horizontalna Osi A (nagib): SWM 45 Os C (vrtenje): Servo Grifer: SWS16 Os B: ni na voljo Stroj je takoj na voljo v našem skladišču v Hannovru/Nemčiji in je bil preizkušen. Garancija Garancija do prve uporabe. Nakladanje/pošiljanje Brezplačno nakladanje na tovornjak kupca ali brezplačna dostava (stroški transporta se povrnejo) / dostava po vsem svetu je možna iz našega skladišča v Hannovru / Nemčiji Financiranje – Na zahtevo – Možnost lizinga Cena: Na zahtevo

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 95.239 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 173937, vpenjalna sila: 2.000 kN, premer vijaka: 55 mm, razmak između stupova: 520 mm, minimalna višina orodja: 250 mm, skupna dolžina: 5.100 mm, skupna širina: 1.800 mm, skupna višina: 2.200 mm, skupna masa: 6.630 kg, Oprema: dokumentacija / priročnik, The machine operated flawlessly until the last day before the arrival of the new machine. It is therefore in good used condition. The machine is being sold due to lack of space in the injection area and is no longer connected to power. Pump, injection unit, and clamping unit are leak-free. The machine manual is available. Podpfxjv D Nxle Anpsrc Videos of the machine are available. Operating hours (pump): 95,239 Operating hours (automatic): 86,082 Repairs in recent years: - Filter changed annually - 05/2024: Fan in control cabinet replaced - 07/2023: New valve for Y201 and Y210 nozzle forward/back - 02/2023: New keypad installed (motor and heating panel) - 12/2022: Ejector and injection unit sealed, including new piston

Stanje: dober (rabljeno), For sale: - Injection moulding machine, aggregate, automatic machine for the production of EPS (expanded polystyrene) form inserts – thermal boxes, fishboxes – low hours, very good condition. The machine is currently still connected to the installation, which will facilitate disassembly and marking of individual connections for the buyer. - Complete machine, ready to be connected to a steam system, EPS granulate transport, electricity, compressed air, and cooling system. - Year of manufacture: 2023 - Configurable mould for the production of EPS thermal boxes and fishboxes – 3 sizes, available with or without holes, with lids – total 6 configurations. During a single production cycle, complete boxes with lids are produced – no need to change the moulds. - Included: rights to the box/fishbox design – full documentation. Note: The machine can also be used to produce EPS building elements for walls and ceilings – examples shown in the photos. We offer additional elements of the production line – check our other listings. We also have other equipment/components for sale such as: - Injection moulding machines, aggregates, automatics for the production of EPS foundation boards + board mould Prodpfx Anjua Dqiepec - EPS pre-expander - Steam installation: boiler house – machines - 3m³ steam tank - EPS conveying installation - EPS silos - Polystyrene crusher - Wide range of spare parts More photos and information available via email. Possibility to sell individual components of the set separately.

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 9.237 h, Oprema: pogon na vsa štiri kolesa, Equipment: * Year of manufacture: 2006 * Operating hours: 9,236 h * Power: 157 kW / 213 hp * Weight: 19.8 t * Tyres: Michelin 23.5-25X Type A, approx. 60% tread remaining * Rear-view camera * Steering wheel control * Air conditioning * Tow pin * Central lubrication system * Suspension seat * Radio pre-installation Other information: * 1 previous owner * German machine * CAT service book maintained * Last service at 9,003 h * Signs of use * Rust present Since 1972, your reliable partner for automotive and commercial vehicles in 28832 Achim, near the Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly stocks approx. 200 vehicles including vans, commercial vehicles, and construction machinery! Pedpfx Aezlvm Uonpsrc We continuously offer attractive financing options at special rates. Upon request, we gladly provide a tailored offer! Trade-in of your commercial vehicle/construction machinery welcome. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged through our external partners for an additional charge. The details given in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typing or data transmission errors. Listed equipment must be verified separately if necessary. Subject to prior sale and errors.

Stanje: dober (rabljeno), Leto izdelave: 2004, Po želji, za doplačilo, lahko organiziramo naklad in prevoz (po vsej Evropi). Vse cene vključujejo DDV Ogled je možen po predhodnem dogovoru. Kontaktirajte nas, naše osebje vam bo z veseljem pomagalo. Predpoxirqqefx Anpsc Možna je menjava ali odkup! Telefon: Mobilni: z veseljem tudi preko WhatsAppa) Spletna stran: Nakup/prodaja strojev NAKUP / PRODAJA PROIZVODNIH & OBDELOVALNIH STROJEV IN OSTALO. Potrebujete kakovosten, vendar cenovno ugoden stroj za obdelavo kovin za svojo proizvodnjo? Ali ga želite prodati? Za več informacij ali kontakt obiščite našo spletno stran,