Demag Df 45 C nakup rabljenega (509)

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD Nodpfx Aox D Rqrsfgscp • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.000 h, vpenjalna sila: 500 kN, premer vijaka: 25 mm, injekcijska masa: 46 g, skupna višina: 1.779 mm, skupna masa: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Included with the machine are a granulate dryer, an industrial robot, a conveyor belt, and temperature control units. Ideal for high-quality injection moulding processes. Please contact us for more information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature control units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mould safety • Fully electric direct drive • Ultra-precise direct drive motors with a response time of 0.1 ms • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping platens: 520 x 570 mm Additional Information Control Unit Modern control system with NC5+ Automatic adjustment of mould height and clamping force Energy-saving routines Ncsdpfx Aox D Eccjfgop Dimensions Machine depth: 4308 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 17.577 h, vpenjalna sila: 1.600 kN, skupna višina: 2.060 mm, This SUMITOMO SHI DEMAG IntElect 160/520-340 smart was manufactured in 2013. It is an all-electric injection molding machine known for its precision and efficiency. If you are in the market for a high-quality injection molding machine, consider the SUMITOMO SHI DEMAG IntElect 160/520-340 smart, which we are offering for sale. Contact us for further information. Additional Equipment • Sepro Robot SDR 11 Machine Advantages Technical Machine Specifications • Clamping unit: 160 / clamping force: 1760 kN / max. opening stroke: 495 mm / minimum mold height: 275 mm / maximum mold height: 585 mm • Distance between platens, max.: 1080 mm / platen size (H x V): 760 x 785 mm / tie bar spacing (H x V): 520 x 520 mm • Ejector stroke: 125 mm / ejector force: 35 kN • Injection unit: 340 / screw diameter: 35 mm / L/D ratio: 20 / injection volume (PS), without accumulator: 288 cm³/s • Metering stroke: 162 mm / max. nozzle stroke: 350 mm / nozzle immersion depth (svo): 20 mm / nozzle contact force: 30 kN • Material hopper capacity: 35 l / max. injection speed, standard: 300 mm/s / max. injection speed, increased: 500 mm/s • Net weight without oil: 7300 kg Additional Information Electrical and pneumatic interfaces: - Sockets: - 2 x Schuko (1Ph, 230V, 10A) - 2 x IECEE (3Ph, 400V, 16A) – switchable via main switch - Additional Schuko socket also available (same specification) - Valves: - 1 x pneumatic 5/2 valve on moving platen (programmable) - 2 x pneumatic 5/2 valves on stationary platen (programmable) - I/O: - 3 digital inputs / 3 digital outputs (freely programmable) - Terminal strip outside the control cabinet Air & Cooling: - Central air supply and piping - Cooling system: open circuit - Cooling water controller: 4 circuits with temperature display (max. 10 l/min per circuit) - Separate water inlet for cooling (mold + machine) - Mold cooling shutoff (time programmable) Mechanical Features & Movement: - Clamping and injection unit colors: - Jet black (RAL9005): bed, pump station, lower control cabinet - Signal white (RAL9003): clamping unit, injection unit, safety covers, guards, safety doors - Platen layout: E standard (similar to EUROMAP, March 1996) - No side ejector plate - Ejector: held in front position by spring-loaded mold ejector - Standard mold height - Standard closing speed - Active movements only when guard is closed - Screw: wear-resistant nitrided cylinder, standard L:D, 35 mm diameter - Non-return valve: 3-piece, ring-shaped Control, Programming & Monitoring: - Inputs/outputs and sequence freely programmable - Switch programs (e.g., dry run, start-up scrap counter, timed cooling) - Injection process: - Injection force at max. injection speed: 200 mm/s - Back pressure programmable via 6-point polygon - Hold pressure switchover depending on melt pressure - Post-injection, back pressure, dosing: closed-loop control - Feed throat temperature control: closed-loop, max. 90°C ±9°C - Reduced nozzle closure force (programmable) - Clamping force: closed-loop controlled Ncodpfx Aox D Hnmefgop

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 122.158 h, vpenjalna sila: 3.300 kN, premer vijaka: 60 mm, This hydraulic injection moulding machine, DEMAG ET 330 - 1450, was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for a wide range of applications. The machine is equipped with a Wittmann W322-121 linear robot, enhancing automation capabilities. Take advantage of this opportunity to purchase the hydraulic injection moulding machine DEMAG ET 330 - 1450. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mould installation height: min. 330 mm / max. 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm Ncedpfx Ajyg Nkwjfgep • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit Code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cm³ • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Hardened (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0 zone (none) • Maintenance: • Hose replacement performed in 2017 Additional Equipment • Wittmann W322-121 CNC linear robot/extraction unit (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm Nodjyfq Aljpfx Afgjcp • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)

Stanje: rabljeno, Leto izdelave: 2004, vpenjalna sila: 110 kN, delovna prostornina: 2.926 cm³, tlak vbrizgavanja: 1.600 letvica, skupna masa: 5.650 kg, premer polžastega transporterja: 45 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Ncedpfxeymqz Ro Afgop Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Leto izdelave: 2005, vpenjalna sila: 110 kN, delovna prostornina: 2.926 cm³, tlak vbrizgavanja: 1.600 letvica, skupna masa: 5.650 kg, premer polžastega transporterja: 45 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Nedpjymqz Djfx Afgocp Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Leto izdelave: 2005, vpenjalna sila: 110 kN, delovna prostornina: 398 cm³, tlak vbrizgavanja: 1.550 letvica, skupna masa: 5.700 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: iz lokacije Ncjdsymqzqopfx Afgsp Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: rabljeno, Leto izdelave: 2005, vpenjalna sila: 110 kN, delovna prostornina: 398 cm³, tlak vbrizgavanja: 1.550 letvica, skupna masa: 5.700 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Plačilni pogoji: 100% pred prevzemom stroja, neto Nedpfx Ajymqzksfgocp

Stanje: rabljeno, Leto izdelave: 2003, vpenjalna sila: 150 kN, delovna prostornina: 399 cm³, tlak vbrizgavanja: 1.598 letvica, skupna masa: 7.500 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Ncsdpsylz Aiofx Afgsp Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: novo, Leto izdelave: 2022, moč: 10 kW (13,60 KM), največja hitrost vrtenja: 2.800 obr/min, Demag motor GCH140 D2 Stanje: novo, cena na povpraševanje ED 100 % Nsdpfxsywi R Tj Afgscp 10,00 kW 31,5 A 2800 obr/min 380V 50 Hz Zavora: 19 Nm

Stanje: novo, Leto izdelave: 2019, Funkcionalnost: nepreverjeno, številka stroja/vozila: 40906979, Več kosov na zalogi. Izdelki so novi in neuporabljeni. Njdpfx Afeywy Dwjgscp

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Različni modeli daljinskih upravljalnikov na zalogi. Oglejte si fotografije. Glede na izdelek so lahko novi ali rabljeni. Možen je posamičen nakup ali nakup v kompletu. Za informacije o ceni posameznega izdelka nam pošljite sporočilo. Od vseh izdelkov imamo več kosov na zalogi. - Daljinski upravljalnik DEMAG DRC-DC 6 - Daljinski upravljalnik DEMAG DRC-10 D2 Nedpfsywyyxjx Afgjcp - Daljinski upravljalnik DEMAG DRC-DC 10 - Digitalni daljinski upravljalnik DEMAG DRC-10 2ST D3 - Daljinski upravljalnik DEMAG DIR H6 - DEMAG ročaj za upravljanje dvigala z lučko (773 300 44) - DEMAG upravljalno stikalo DSE 10-CS - DEMAG kontroler DST7 CS22 RJ

Stanje: zelo dobro (rabljeno), Verižni dvigala - DEMAG / STAHL - 14 kosov: 1. Demag DKUN 10 - 2,5 t. 2. Demag PK10 - 2 t z električnim vozičkom, elektro omarico, kablom. 3. Demag PK 10 - 1000 kg. Nodpsyvwbwefx Afgocp 4. Demag DKUN 5 - 500 kg. 5. Demag D-BE - 160 kg. 6. Demag PK 2 F - 500 kg. 7. Demag PK 2 N-F - 250 kg. 8. Verižni dvigalo Demag - 3 kosi: 1. Demag DKUN 2 - 250 kg. 2. Demag PK 2 N - 500 kg. 3. Demag PKVUN 1 - 125 kg. 9. Demag PK 1 N - 125 kg. 10. Demag motor PKUN 1 - 125 / 250 kg. Verižni dvigala Stahl: 1. Stahl T 405 M - 1000 kg. 2. Stahl T 302 S - 500 kg.

Stanje: novo, Bottom blocks / Crane hooks / Hooks – 53 units: Bottom block – 40 t for DH / DR / DMR (price and photos on request) Bottom block – 32 t for DH 2000 / P2000 (price and photos on request) 1. Bottom block – 20 / 25 t – (1 unit) 2. Bottom block – 12.5 t – (1 unit) 3. Bottom block – 12.5 t (without safety latch) – (1 unit) 4. Bottom block – 10 t – (2 units) 5. Bottom block – 6.3 t – (1 unit) 6. Bottom block – 12 / 10 t / 6.3 t / 3.2 t / 2.5 t – (3 units) 7. Bottom block – 5 t / 3.2 t – (2 units) 8. Bottom block – 4 t (2 units, unused, with storage marks) 9. Bottom block – 3.2 t (2 units, used) 10. Bottom block – 2.5 t, without hook (2 units) 11. Hook for chain hoists – 2 / 2.5 t (1 unit) Abus bottom block / hooks: 1. Abus bottom block – 30 t (used) Nodpfx Afjyvvbcogecp 2. Abus bottom block – 12.5 t (new, without safety latch) Konecranes bottom block – 5 t (used) Hooks – 150 t (2 units, new) Hooks – 40 t (1 unit, new) Hook Gr. No. – 2.5 (1 unit) Hooks – 15 units Hooks – 12 units Hooks – 15 units

Stanje: zelo dobro (rabljeno), DEMAG / ABUS / STAHL / CONEKRANES / SCHNEIDER / TELEMECANIQUE – Pendant Controls / Pendant Stations / Empty Enclosures: DEMAG Pendant Controls: 1. Type: DST 9 / DST 6/7 / DST 6 / DST 3 – 27 units (used). 2. Type: DRC10 2ST D3 – 2 units (new). 3. Type: DSE 10CS – 1 unit (new). 4. Type: DST 9 SP222 – 1 unit (new). 5. Type: DSE 8 P222BE – 1 unit (used). 6. Type: DCS – 1 unit (new). ABUS Pendant Controls: 1. Type: 70268 – 2 units (new). 2. Control cable type: SC15X1 L. – 2000 mm – 2 units (new). STAHL Pendant Controls: 1. Type: STH 1202 - 021 – 1 unit (new). 2. Type: STH 1202 - 021 – 1 unit (used). CONECRANES – 1 unit (new). SCHNEIDER Pendant Control: 1. Type: XACA 1436217 – 1 unit (new). TELEMECANIQUE Pendant Control / Empty Enclosure: 1. Type: XAC A08 – 2 units (new). 2. Type: XAC B02 – 2 units (new). Njdpfx Afsyvuakegocp 3. Type: XAC B06 – 1 unit (new). 4. Type: XAC B04 – 1 unit (new). SELECTOR SWITCH – Pushbutton – 1 unit (original packaging).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Oprema: dokumentacija / priročnik, Demag Systec 100/420-310 (2015) Panel: NC5 Vpenjalna sila: 100 t Njdpfsyg Eu Sex Afgscp Premer vijaka: 30 mm Razdalja med stebri V: 420 mm Razdalja med stebri H: 420 mm Tip: Horizontalen Pogon: Hidravličen Morda kupiti Wittmann W818 linearni robot Z = 1500 mm

Stanje: zelo dobro (rabljeno), DEMAG / ABB / TELEMECANIQUE - Frekvenčni pretvorniki / pretvorniki - 11 kosov: 1. DEMAG tip - ACS800 04M-0140-3+D150+E210+H355+H356+H360 z uporovno enoto (nova) - 1 kos. 2. DEMAG tip - ACS800 04M-0210-3+D150+E210+H355+H362+N672 z uporovno enoto (rabljena) - 1 kos. 3. DEMAG tip - UD DPU415V024E10 - 1 kos. Ncjdoyu S Alspfx Afgep 4. TELEMECANIQUE tip - ATV 58ED23N4 - 15 kW (v originalni embalaži). 5. DEMAG tip: ABB - ACS 800 - 2 kosa. 6. DEMAG tip: ABB - ACS 800 - 1 kos. 7. VACON / AC DRIVE - 3 kosi. 1. VACON tip: X4K40400C 2. VACON tip: XX4K440075C 3. AC DRIVE tip: X4K40075C1 8. AC DRIVE tip: X4 - 1 kos.

Leto izdelave: 2024, stanje: novo, Demag NC3 panel, new, never used. Width: 30 cm Height: 5 cm Ncedpfjqvuinox Afgep Length: 50 cm

Leto izdelave: 2024, stanje: novo, Demag Panel NC3 Made in Germany Width 30 cm Height 5 cm Length 50 cm TYPE: 6EJ5 398-0DE14 Ncsdpfxoqvuige Afgsp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, številka stroja/vozila: TH2000MessraumRES, DEMAG KBK комплект мостового крана, крановый путь 9,3 x 5,3 м (ход моста около 5 м) Кран также доступен на складе в других размерах с приподнятой тележкой. Грузоподъемность / подъёмная сила: 500 кг Технические характеристики: - Крановый путь из профилей Demag KBK2 - С приподняной тележкой — крановая балка установлена между двумя рельсами для максимальной высоты подъёма - Встроенное питание!! Ncodov Iai Nspfx Afgep Комплектация: KBK рельсы, соединители рельсов, тележки, торцевые пластины, кабельная каретка (опционально — внутренняя токоподводящая шина!), держатели/подвесы и др. Включая электроталь Demag DK NL 500 кг Кран демонтирован и готов к немедленной отгрузке В наличии различные краны Хорошее состояние, смотрите фото Местонахождение товара: 75053 Гондельсхайм Отправка транспортной компанией или самовывоз только по согласованию Направляющие Demag KBK1, KBK2 и KBK3 всегда есть в наличии! В наличии также другие KBK системы. Грузоподъемность от 125 кг до 1600 кг Запросите вашу кранбалку с желаемой грузоподъемностью и размерами — индивидуальный расчёт!

Stanje: rabljeno, Suspended Crane Runway System made of aluminum system profiles, similar to GIS GISKB ALU, EEPOS, KITO ProSystem, ERIKKILA. Not DEMAG, but comparable to KBK. Double-rail suspended crane runway with single-girder bridge crane. Light crane system constructed from aluminum system profiles. Lifting capacity: 125 kg Span width: 3.2 meters as a single-girder bridge Profile height: 155 mm Profile width: 100 mm Ncedpfxjuch Rfj Afgsp - Profiles: natural anodized aluminum - Trolleys with smooth-running plastic rollers - Power supply via festoon cable on wire rope Consisting of: 2 pieces of 4.8 meter aluminum system profiles for the longitudinal rails, each with 3 suspension lugs 1 piece of 3.35 meter aluminum system profile for the cross beam (single-girder bridge) with 2 suspension lugs 1 trolley for crane suspension on the cross beam 2 trolleys on the longitudinal rails 6 end caps matching the profile rails Weight of profile rails: 125 kg Very good condition, like new You will find hoists in our online shop under the search term "chain hoist". Matching installation accessories can be found in our online shop under the search term "KBK".

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, skupna masa: 11.800 kg, skupna dolžina: 16.700 mm, nosilnost: 10.000 kg, delovna višina: 11.350 mm, dvižna višina: 11.350 mm, Oprema: dokumentacija / priročnik, Demag mostovno dvigalo – Tip: dvonosilno – Nosilnost: 2x 5.000 kg – Dvižna višina: 11,35 m – Leto izdelave: 2021 – Tip vitla: vitla z jekleno vrvjo – FEM/ISO vitlo: 2m / M5 – Proizvajalec: Demag / Siempelkamp Dimenzije – Razpon: 16.700 mm (od sredine do sredine) – Skupna dolžina: 17.000 mm – Montažna višina: 1.600 mm – Širina: 3.860 mm – Medosna razdalja: 3.150 mm – Primerno za dizalično tirnico: A55 / 50 x 30 mm – Neto teža: 11.800 kg Hitrosti – Dvig: 8/1,3 m/min – Obračanje vozička: 20/5 m/min – Premik dvigala: 40/10 m/min Nedsyvr Huepfx Afgjcp Značilnosti – Upravljanje: radijsko upravljanje – Priročnik za dvigalo na voljo: da – Električne sheme na voljo: da – Stanje: v zelo dobrem stanju – Demontirano: da, na voljo takoj – Posebnosti: 8,5-tonski Equator s karuselom kot možnost

Stanje: rabljeno, prevoženi kilometri: 411 km, moč: 22 kW (29,91 KM), prva registracija: 03/2004, vrsta goriva: dizel, lastna masa: 760 kg, barva: rumena, vrsta prenosa: mehanski, vzmetenje: drugo, obratovalne ure: 411 h, Moč motorja: 22 kW, dizelski motor, letnik 2004, samo 411 delovnih ur. Kompresorsko kladivo, zračni vibracijski betonator, lastna teža: 760 kg, kot novo stanje. ZA NAS JE POMEMBNO STANJE IN OBČUTEK, CENA JE NA DRUGEM MESTU. Za dodatna vprašanja vam je na voljo g. Faller na navedeni številki. //*MOŽNA MENJAVA, ODKUP ALI ZALOŽITEV VAŠEGA VOZILA, TER FINANCIRANJE! Vse informacije brez jamstva. Druge ponudbe najdete na naši spletni strani: Opis in navedeni podatki niso jamstvo in niso zavezujoči. Zavezujoča je samo prodajna pogodba, ki se sklene v avtohiši ob nakupu vozila. Pridržujemo si pravico do napak in vmesne prodaje! Ncedpfx Aexrpmujfgep

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, skupna masa: 3.700 kg, skupna dolžina: 12.500 mm, skupna širina: 2.932 mm, nosilnost: 8.000 kg, glavna hitrost dviga: 12.500 mm/min, delovna višina: 10.000 mm, dvižna višina: 10.000 mm, Oprema: dokumentacija / priročnik, Demag mostno dvigalo – Tip: enonosilno girder – Nosilnost: 8.000 kg – Višina dviga: 10 m – Leto izdelave: 2017 – Tip dvigala: vitel z jeklenico Ncsdpfxjyvfn Re Afgsp – FEM / ISO dvigalo: 3m / M6 – Proizvajalec: Demag Dimenzije – Razpon: 12.500 mm (od sredine do sredine) – Namestitvena višina: 1.031 mm – Širina: 2.932 mm – Medosna razdalja: 2.500 mm – Primerno za žerjavno tirnico: 50 x 30 mm – Lastna teža: 3.710 kg Hitrosti – Dviganje: 0,5–12,5 m/min (brezstopenjsko) – Premik vozička: 3–30 m/min (brezstopenjsko) – Premik žerjava: 6–60 m/min (brezstopenjsko) Lastnosti – Upravljanje: radijsko upravljanje – Priročnik za žerjav na voljo: da – Električne sheme na voljo: da – Stanje: kot novo – Demontirano: da, na voljo takoj – Opremljeno s prikazom teže