Stroji za brizganje

DEMAG 150-610. System NC4

Leto izdelave: 2006, stanje: dober (rabljeno), 5-axis vertical machining center, fully equipped with direct-drive technology. Machine fitted with a 30,000 rpm spindle, 60-position tool magazine, and Heidenhain TNC 530 CNC. Fodpfepkyn Rjx Abropn

Stanje: potreben popravila (rabljeno), Fehlmann Picomax 60 M (5-axis universal milling machine) with Heidenhain TNC 426 X axis: 500 mm Y axis: 350 mm Z axis: 610 mm Motor spindle: 18,000 rpm Power: 10.2 kW Tool changer: 24 stations Weight: 3,200 kg Fedpjwmwrdjfx Abrjpn Equipped with 4th axis Tool interface: SK 30 Approx. 40 tool holders included The machine has the following issues: - Heidenhain 430 controller is defective (not always possible to boot, crashes occur during machining operations)

Stanje: rabljeno, Leto izdelave: 2003, CNC obdelovalni center, univerzalni Proizvajalec: AXA Tip: VPC 40 U Leto izdelave: 2003 CNC krmilnik: Heidenhain TNC 430 Hodi: X/Y/Z = 2.300 x 1.200 x 600 mm Dimenzije rotacijske mize: 1.100 x 1.100 mm Dimenzije fiksne mize: 1.100 x 1.100 mm Fsdpfx Abewwt Nmsrjpn Vpenjalni sistem orodij: SK40 Revija za orodja: 60 mest Število vrtljajev: 10.000 vrt/min Teža: približno 20 ton. 51026ä

Stanje: skoraj kot novo (rabljeno), Vsi deli so naprodaj, kompletni. Fpjdpfohi Tvbox Abrsn

Stanje: rabljeno, Leto izdelave: 1988, Tehnične podrobnosti: x-pot: 800 mm y-pot: 410 mm z-pot: 510 mm Nadzorni sistem: Fanuc 10 MA Hitri pomiki x/y/z: 20/20/15 mm/min Površina mize: 1100 x 450 mm Vpenjalno orodje: BT 40 Revija za orodja: 30 BT 40 maks. dolžina orodja: 250 mm maks. teža orodja: 8 kg Moč pogona: 7,5/5,5 kW Območje vrtljajev: 6000 1/min Fjdpfx Aey S T T Uebrjpn Masa stroja približno: 6,3 t Dodatna oprema: 2 odvajalnika струžine, iztok zadaj Ponujamo celotno CNC delavnico, ki jo prodajamo zaradi starosti. Mori Seiki je še vedno izjemno natančen. Vsi obstoječi vpenjalniki za orodja in rezalna orodja, rezkalne glave, svedri, navojni svedri, primeži itd. bodo oddani skupaj. Prav tako vsi merilni instrumenti in naprave. Obstojeca naročila se lahko tudi oddajo. Absolutno ugoden začetni paket za »startup«. *

Stanje: rabljeno, Leto izdelave: 2006, Technical details: x-axis travel: 1000 / 600 mm y-axis travel: 570 mm z-axis travel: 570 mm Control unit: Fagor 8055 MC Tool magazine with 24 stations Fodpfx Absu Idfrjrspn Tool holder: SK 40 Spindle speed: 10,000 rpm Spindle taper: SK40 Infinitely variable feed rates X/Y/Z: 10 m/min Rapid traverse X/Y/Z: 24 m/min Operating hours / power-on hours: not available Table size: 1200 x 500 mm Table load capacity: 800 kg Distance spindle nose to table: min./max. 100/670 mm Interface: 232 Total power requirement: 15 kW Machine weight approx.: 5.0 t Machine dimensions (LxWxH) approx.: 3.3 x 2.3 x 2.8 m Equipment: - Cooling unit with spindle feed (no ICS) - Control panel with hand-held controller - Chip conveyor - Electrical cabinet with cooling, Rittal SK 3305500 in good condition.

Leto izdelave: 1990, stanje: rabljeno, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Refurbished: 2000 X-axis as longitudinally traversing portal: 850 mm Y-axis cross slide within portal: 1,200 mm Z-axis as measuring head quill (vertical) approx.: 600 mm Clearance between portal sides approx.: 1,000/1,080 mm Vertical clearance approx.: 750 mm Total table size approx.: 1,000 x 2,100 mm Table height above floor approx.: 850 mm Overall machine height approx.: 3,050 mm Fodpjt Hwqkefx Abrepn Weight approx.: 3,800 kg Special equipment / Accessories: – Granite plate as measuring table and crossbeam, vibration-dampened – Measuring 3D probe head for accommodating 5 different probe inserts and for SCANNING operation for continuous data acquisition, resolution 0.1 µm – Path control for 3 axes simultaneously – HEWLETT-PACKARD computer system H 382 with colour monitor, disk drive, keyboard, optional printer – ZEISS software as follows: UMESS 300/MFT 300 with extension package, revision 1998, as well as 302 Form and Position Inspection, 303 Fitting Functions, 305 Automatic Operation, 307 Parameter Ctrl. Manager, and options Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / Bore Pattern Program A 741 and Probe Check 99 – Mobile manual control panel with progressive control lever for continuously adjustable travel speed of the 3 axes – Probe magazine mounted on the machine, equipped with 3 probes, with probe change-over facility – Separate control and switch cabinet Type 608485, separate computer desk, separate cabinet – Operating manuals, various measuring probes, and table-mountable calibration ball/standard

Stanje: rabljeno, Leto izdelave: 1986, Tehnične podrobnosti: Pomik v osi x: 800 mm Pomik v osi y: 460 mm Pomik v osi z: 510 mm Skupna potrebna moč: 20 kW Fsdpfewvblasx Abrspn Teža stroja pribl.: 8 t Vertikalni obdelovalni center 20 kW je nazivna vrednost. Vreteno potrebuje le 7,5 kW. Zdi se, da je 15 kW dovolj.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: nepreverjeno, potovalna razdalja osi X: 610 mm, pomik osi Y: 510 mm, pomik po osi Z: 610 mm, skupna višina: 2.500 mm, skupna dolžina: 2.200 mm, skupna širina: 2.400 mm, dolžina mize: 760 mm, širina mize: 510 mm, obremenitev mize: 1.000 kg, For sale is a 3-axis CNC milling machine from Hurco, model VMX 24. Technical data: - Year of manufacture: 2001 - Control unit: Winmax 4 - X axis: 610.0 mm - Y axis: 510.0 mm - Z axis: 610.0 mm - Table length: 760.0 mm - Table width: 510.0 mm - Max. workpiece weight: 1000.0 kg - Length: 2200.0 mm - Width: 2400.0 mm - Height: 2500.0 mm - Weight: 4700.0 kg - Number of tool pockets: 24.0 Fpjdpfx Aev Tcfksbren Pull studs seen in the photos are not included in the offer. Transport and loading can be organized Europe-wide upon request for an additional charge. All prices are subject to VAT. Inspection possible by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Do you need a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), Leto izdelave: 1992, Fanuc Fanuc automatic chuck AC 100 Clamping force: 100 tons Year of manufacture: 1992 Fsdpeh R Npxefx Abrepn