Rezkalni stroj

CONTUR MHA-5

Stanje: novo, WMD45A ROGI Drilling and Milling Machine VERY COMPLETE MACHINE Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot dimensions ----- 14 mm Spindle taper ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle stroke ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Longitudinal travel ----- 560 mm Transversal travel ----- 230 mm Speed range ----- 75 - 3200 rpm Weight ----- 580 KG Motor ----- 1.1 KW Voltage ----- 400V-3PH INCLUDES * 3-axis digital readout by SINO * Automatic longitudinal table feed * Drill chuck with ISO30 - B16 shank Kedpfxsga Tyzs Afqedw * Left / Right switch * Spindle guard * Fine adjustment * 2-speed motor * Drift key * LED work lamp * Coolant system * Tapping function * Digital depth stop * Milling head motorized height adjustment * Various tools in case

Leto izdelave: 2020, Stanje: novo, Touch to delete ROMER cabins are equipped with 4-inch color touch lights. The cabin control is intuitive and available in three operating modes: automatic (temporary), automatic (via plug-in filter connector), or manual. Filter connector sensor The cabins are fitted with a sensor that detects when the filters are clogged and need to be cleaned. The system also notifies when filters are already in use. Automatic filter cleaning The electronic automatic filter cleaning system controls the frequency and timing of cleaning. Each filter is cleaned individually; the filters can also be cleaned manually using presses. We know from experience that it's difficult to rely on the operator to clean the filters. Thanks to this system, the operator does not need to stop production. Low noise level Kdsdpsfz I Ehefx Afqjw Aluminum fans operate very quietly, with sound levels between 74-79 dB, which is sufficiently low. Even with the standard cabin design, it is hard to have a conversation nearby. Boiler through the cabin The cabin with overhanging squirrel-cage fans improves work efficiency, reducing the need for painters to move the fans manually. Pre-book construction The other cabins are designed to prevent the build-up of explosive mixtures during the painting process. Every component has been carefully selected to minimize this risk.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 160 mm, potovalna razdalja osi X: 500 mm, pomik osi Y: 250 mm, pomik po osi Z: 480 mm, največja hitrost vretena: 9.000 obr/min, hitrost pomika os X: 2 m/min, hitrost podajanja osi Y: 2 m/min, hitrost podajanja os Z: 1 m/min, hitrost vretena (min.): 100 obr/min, poteza s peresom: 160 mm, širina mize: 320 mm, dolžina mize: 880 mm, X-500, Y-250, Z- spindle stroke 160, W- machine head travel 480, table 880 x 320, max. 320 kg, SK 32 spindle taper, 100-9000 rpm, 5 kW, 60 Nm, Heidenhain TNC 124 control. Extensive accessories included. Kjdpfjq R Rb Hjx Afqedw

Leto izdelave: 2002, Stanje: dober (rabljeno), številka stroja/vozila: SIKBK, DEMAG KBK Crane System – Crane Runway, approx. 10x6m Load Capacity / Lifting Capacity: 500 kg (0.5 t) Technical Data of the System: • Crane runway made of Demag KBK2 rails • System is delivered complete: KBK rails, rail connectors, trolley carriages, end stops, cable festoon system, suspension brackets/hangers, etc. • Including Demag DK2 500 kg chain hoist Crane is dismantled and immediately available. Used condition, see photos. Item location: 75053 Gondelsheim Kjdjmqf Nbspfx Afqsdw Shipping via freight carrier or pick-up by appointment only. Demag KBK1, KBK2, and KBK3 rails in stock! Other KBK systems also available: load capacities from 125 kg to 1600 kg. Please inquire about your required crane runway with overhang and dimensions.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, vhodna napetost: 400 V, Certificirano po DGUV do: 12/2026, skupna širina: 1.380 mm, skupna dolžina: 950 mm, skupna višina: 1.980 mm, vhodna frekvenca: 50 Hz, skupna masa: 258 kg, električna varovalka: 32 A, moč: 21 kW (28,55 KM), Univerzalni pomivalni stroj Hobart XL Model: UXTLS - Velikost košare: 1140 x 680 mm - Višina vstavljanja: 850 mm - Preprosti 3 programi z barvnim prikazom - Odtaljna črpalka - Dozirnik detergenta - Dozirnik sredstva za izpiranje Dimenzije: 1380 x 950 x 1980 mm (ŠxGxV) Priklop: 400V, vtičnica 32A-CEE Rabljena, očiščena naprava Možnosti: Dostavna storitev Kdjdpfowmvz Dox Afqow Filter za vodo Vzdrževalna pogodba Servisni paket Usposabljanje in zagon Pri nas najdete svoj pomivalni stroj!

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 – partially overhauled, newly painted, RAL7035 light grey / RAL3027 raspberry red RAL7016 anthracite grey Machine no.: 344025 with warranty Geometric inspection with test protocol Accessories: Kjdpfx Afjm Nbwtjqsdw - HEIDENHAIN TNC 124 path control system - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D probing system • For detecting the workpiece position • For determining workpiece reference points • For measuring finished parts • Incl. Weldon chuck SK40/Ø 16 mm - Universal table 650 x 395 mm (T-slot: 14 mm) • Swivels on 3 axes • Rotatable 360° (displayed digitally in the control as a 4th axis) • Tiltable +/- 30° • Tilt range towards the machine 45° • Tilt range away from the machine 15° • Centering bore Ø 32 mm • Table load capacity 150 kg - Vertical milling head SK 40 • With hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Splash guard cabin, movable, electrically secured - Operating instructions Used as seen The machine complies technically with the standards of its year of manufacture.

Leto izdelave: 1998, Stanje: dober (rabljeno), številka stroja/vozila: 3862-8063-564, Offer 23036 Kdodpfekzg T Rex Afqow Technical Specifications: - Drilling capacity in solid steel ST 60: 32 mm - Drilling capacity in GG 25: 40 mm - Thread cutting in ST 60: M 27 - Drill spindle taper: MT 4 - Quill stroke: 150 mm - 12 spindle speeds: 102 – 2000 rpm - 3 feed rates: 0.1 – 0.3 mm/rev - Min./max. distance spindle – table: 310 / 610 mm - Drilling radius min / max: 400 / 1200 mm - Table height: 720 mm - Table size: 1200 x 500 mm - Drive: 400 V / 1.6 / 2.9 kW - Space required approx.: W 1200 x H 2800 x D 2300 mm - Weight approx.: 1500 kg - Equipped with: - Thread cutting device - Hydraulic column and arm clamping - Coolant system - T-slots vertically positioned at the rear of the machine

Stanje: novo, Leto izdelave: 2025, moč: 1,5 kW (2,04 KM), Vstopni model laserskega rezalnega stroja za pločevino z vlakenskimi žarki Nizki stroški laserskega rezanja in enostavno upravljanje Modularna delovna miza z ojačitvami prihrani čas pri razstavljanju ter izboljšuje priročnost in togost. Kodpfshvu Hyox Afqjdw Posebna šoba za vlakenski laser in optimiziran postopek rezanja omogočata hitrejše rezanje ogljikovega jekla s kisikom, varčnejše nizkotlačno rezanje nerjavnega jekla z dušikom ter kakovostnejše rezanje ogljikovega jekla z zrakom. Glave vlakenskega laserja lahko zaznajo izbočene ovire ter tako učinkovito zmanjšajo poškodbe in stroške vzdrževanja laserskega rezalnika. Primerni materiali: kovina Stanje: novo Tip laserja: vlakenski laser Delovno območje: 3000 × 1500 mm Hitrost rezanja: 0–40.000 mm/min Podprte grafične datoteke: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Debelina rezanja: 0–30 mm CNC upravljanje: da Način hlajenja: vodno hlajenje

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 850 mm, pomik osi Y: 550 mm, pomik po osi Z: 550 mm, hitro pomikanje X-os: 36 m/min, hitri pomik os Y: 36 m/min, hitri pomik na osi Z: 36 m/min, proizvajalec krmilnikov: Siemens, model krmilnika: 828D + Shopmill, skupna višina: 2.560 mm, skupna dolžina: 2.350 mm, skupna širina: 2.160 mm, širina mize: 550 mm, dolžina mize: 1.000 mm, obremenitev mize: 800 kg, skupna masa: 4.300 kg, hitrost vretena (min.): 100 obr/min, največja hitrost vretena: 10.000 obr/min, dovod hladilne tekočine: 20 letvica, razdalja od središča mize do nosu vretena: 700 mm, nos vretena: SK 40, število mest v zalogovniku orodij: 30, dolžina orodja: 300 mm, premer orodja: 76 mm, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Travel X/Y/Z: 850/550/550 mm Maximum spindle speed: 10,000 rpm Drive power AC (40% duty cycle): 13.5 kW (Siemens) Vertical tool magazine for 30 tools Tool holder: SK 40 Rapid traverse X/Y/Z: 36/36/36 m/min Including features such as: - Preparation for 4th and 5th axis - Robust roller guides on all axes - Spindle cooling system (oil cooling) Kdodpedkh Tiefx Afqew - Fast double-arm tool changer with pre-selection and vertical magazine for 30 tools - Hinged belt chip conveyor - Coolant through spindle with 20 bar high-pressure pump - Air blast through spindle - Coolant gun - Movable electronic handwheel Upon request, we can supply this machine with a suitable rotary table for 4th and 5th axis. Please specify this requirement in your inquiry!

Stanje: rabljeno, Leto izdelave: 2020, Technical Details: Turning diameter: 670 mm Turning length: 1540 mm Control: F31iB5 Celos Fanuc 35iB5 Max. swing diameter over bed cover: 700 mm Travel paths turret no. 1 (milling spindle) x/y/z: 495 / ±150 / 1562(+164) mm Kdjdpfx Aewl Ag Djfqsw B-axis rotation: -30° / +210° Rapid traverse turret 1 (milling head) x/y/z: 40/40/40 m/min Milling spindle speed: 12000 rpm Drive power – milling spindle: 20.2/18.8 kW Torque milling spindle: 120 / 44 Nm Tool interface milling spindle: Coromant Capto C6 Tool magazine for milling spindle (turret 1): 76 Tool change time tool-to-tool, milling spindle: 1.25 s Spindle 1 speed: 3000 rpm Spindle 1 power: 36 / 30 / 25 kW C-axis spindle 1: 0.001° Bar capacity spindle 1: 102 mm Spindle 2 speed: 4000 rpm Spindle 2 power: 26 / 22 / 15 kW C-axis spindle 2: 0.001° Bar capacity spindle 2: 80 mm Space requirement approx.: 7.8 x 3.6 x 2.9 m Linear glass scales on axes: X, Y Programmable steady rest: KLU-A530 & SLU-X3.2 Accessories: Chip conveyor Tool measurement Spindle load monitor Air blow system Air blow system through ICS system to the tool Spindle 1 power chuck Kitagawa 250 (B 210) mm Spindle 2 power chuck Kitagawa 250 (B 210) mm Interface for internal coolant supply 70 bar Tailstock specification for sub spindle Workpiece measurement with Renishaw OMP60 probe Detachable handwheel Workpiece and total counter Three-color signal lamp Robot interface Matris Robot System R-2000iC/165F Automatic door Rotoclear viewing window Quick clamping cycles Program restart Four-color signal lamp Ethernet I/P interface Manual tool measuring arm Automatic door Oil mist separator Oil skimmer Spindle touch probe for workpiece measurement External air blow system sub spindle Spindle 1 coolant nozzle Spindle 2 coolant nozzle Coolant gun Internal coolant supply 70 bar with Knoll filtration A high-spec CNC turning and milling center with sub spindle, which can also be used with tailstock functionality. The machine has an automatic door and Matris Robot System type R-2000iC/165F.