Polpriklopnik z delovno ploščadjo nakup rabljenega (73)

Stanje: rabljeno, skupna masa: 34.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2008, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Schwarzmüller plato priklopnik | BPW osi z disk zavorami | Leto izdelave 2008 | Nosilec rezervnega kolesa | Škatla za palete | Škatla za orodje | Pnevmatske gume: 385/65 R22,5 | | Pridržujemo si pravico do napak, vnosnih napak in predhodne prodaje. Pgjdpfxsxx Nlwe Adpsw

Stanje: rabljeno, največja dovoljena obremenitev: 34.240 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/2022, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 13.650 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, Leto izdelave: 2022, Oprema: ABS, 3-axle flatbed semi-trailer FLIEGL Type SDS 390 First registration 11/2022 German registration, from first owner Gross weight 39,000 kg Unladen weight 4,760 kg Fifth wheel load 12,000 kg Flatbed length 13,650 mm Coupling height 1,150 to 1,200 mm Heavy-duty two-speed landing gear Plastic toolbox 650 x 520 x 670 mm 2x additional LED reversing lights Pedjxd I Uzopfx Adpsgw 30 mm thick anti-slip plywood floor, forklift axle load up to 7,100 kg Reinforced front wall 1,950 mm high, high-volume version Outer frame slightly inclined, new "Load-Lock" design for lashing strap attachment SAF axles with large 430 mm disc brakes 1st axle lift axle KNORR trailer EBS with RSS (vehicle stability system) Tyres: 6 x 385/65 R 22.5, tread depth 90% RENTING is the new BUYING, immediately available from us also as a full-service rental-----

Stanje: rabljeno, največja dovoljena obremenitev: 33.900 kg, skupna masa: 39.000 kg, prva registracija: 09/2005, skupna širina: 2.550 mm, skupna višina: 2.770 mm, Oprema: ABS, Zračna zavora, bobnasta zavora, BPW osi, lesen pod, rabljeno vozilo Pgodpfx Aoxxwdhjdpsw Št. vozila 3244, zračna zavora ALB/ABV, 3x orodjarna, bočna zaščita L+D, lastna masa: 5.100 kg, skupna masa: 39.000 kg, BPW osi z bobnastimi zavorami, Alcoa aluminijasta platišča, dimenzija pnevmatik: 385/55R 22,5, lesen nakladalni pod, nastavki za kontejner, žepe za stebre, notranje mere tovornega prostora D x Š: 13.520 x 2.550 mm. Za povpraševanje prosim..., napake in vmesna prodaja pridržane.

Stanje: novo, največja dovoljena obremenitev: 36.245 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Selection of equipment features. Full specification available on request. Load Area: * Load deck made of hardwood flooring with rear bevel, approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of folding lashing rings (LC 5,000 daN) * 2 pairs of folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the load area for attaching tension belts (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air suspended * Disc brakes (approx. 377 mm) * Raise/lower function (ET 120) * Axle tools Tyres: * Tyres 435/50 R 19.5 – brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the towing vehicle via the standardised EBS interface as per ISO 11992. For correct display, the towing vehicle must be able to receive and display this data. Brake System: * Wabco brake system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Steel Construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on front connection bar with 24N, 24S & 15-pin sockets – as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Entire steel structure automatically shot blasted post-welding using a shot blasting machine * Second blasting with corundum for optimal paint adhesion * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) for optimal corrosion protection * Final coating with 2 coats of 2K top coat, single-colour in RAL 3002 carmine red according to RAL system 841GL Pgodpfow Tpqqox Adpsw * Rear section metallised and painted in RAL 9010 (pure white) * Paint system tested in salt spray test as per ISO 9227-NSS * Cavity sealing with special wax * Metallic paintwork not possible Includes the following additional equipment: * Yellow-red air couplings on the galvanised front connection bar * 4 wheel chocks with brackets * 2” kingpin * Load area with heavy-duty hardwood flooring * 1 spare wheel carrier under the deck, right-hand side * Galvanised folding supports under the load area bevel * 9 pairs of stake pockets for plug-in posts, approx. 100 x 50 mm, in the outer frame of the deck * One galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Sand coating painted onto centre beam as anti-slip system * 1 INOX toolbox mounted transversely under the deck, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container pockets in the load area, for 1x 20' container, 2x 20' container or 1x 40' container * 3 pairs of crosswise stake pocket rails in the load area, for plug-in posts approx. 100 x 50 mm * Rack for storing max. 9 pairs of plug-in posts (approx. 100 x 50 mm) screwed to the inside of the front wall * 2 INOX toolboxes under the deck left and right, approx. 600 x 350 x 600 mm * Holder for aluminium loading ramps, mounted transversely under the deck, behind the axles * One warning beacon supplied loose

Stanje: rabljeno, največja dovoljena obremenitev: 10.540 kg, skupna masa: 18.000 kg, konfiguracija osi: 1 os, prva registracija: 05/2009, naslednji pregled (TÜV): 01/2025, dolžina tovornega prostora: 11.000 mm, širina tovornega prostora: 2.500 mm, Leto izdelave: 2009, Oprema: ABS, * Pridržujemo si pravico do napak in vmesne prodaje * Ogled možen le po predhodnem dogovoru * Na povpraševanja o zadnji ceni ne odgovarjamo * Na povpraševanja preko WhatsApp-a ne odgovarjamo * Videoposnetki niso narejeni Pgodpfx Adswb Rwiepjw

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Lifting height: 1200 mm Load capacity: 230 kg Machine weight approx.: 0.48 t Dimensions (L x W x H): 2.8 x 1.0 x 2.0 m Column lift platform, fabricated from welded profile steel, mobile. Pgjdpfx Adsu Nk Ayopjw - Hydraulically operated - Lifting category 3 - 2 lifting forks, 1650 x 100 x 60 mm, with rubber strip pads; clamping device with screw clamp - Floor height min./max.: 900/1020 mm Chassis with handrail, 2x2 wheels (2 swivel and braked)

Stanje: rabljeno, lastna masa: 6.560 kg, največja dovoljena obremenitev: 26.920 kg, skupna masa: 33.500 kg, konfiguracija osi: 3 osi, prva registracija: 05/2012, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Schwarzmüller plato polpriklopnik | BPW osi z disk zavorami | Letnik 2012 | Nosilec za rezervno kolo | Orodjarna | Pnevmatike: 385/65 R22,5 | Napake in predhodna prodaja pridržane. Pgodpfjxtdq Rjx Adpew

Stanje: rabljeno, številka stroja/vozila: 51.E164-010-01, Leto izdelave: 2008, Meusburger/IFE MPS-3 polpriklopnik vklj. s sejalno napravo. Povpraševanja izključno po e-pošti ali preko Machineseeker. Psdevpfqhspfx Adpjgw

Stanje: rabljeno, največja dovoljena obremenitev: 29.440 kg, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, prva registracija: 06/2012, naslednji pregled (TÜV): 05/2026, dolžina tovornega prostora: 13.500 mm, širina tovornega prostora: 2.450 mm, skupna širina: 2.550 mm, Leto izdelave: 2012, Oprema: ABS, KRONE SD PLATFORM BPW WINCHES----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST ----VEHICLE EQUIPMENT ----VEHICLE DATA * SEMI-TRAILER: PLATFORM * AXLES: 3-AXLE * AXLE MANUFACTURER: BPW * SUSPENSION: FULL AIR SUSPENSION * BRAKES: DISC BRAKES ----FEATURES * TOOLBOX: 2X * STAKE STORAGE: AVAILABLE * WINCHES: 12X (6 PER SIDE) ----TYRES * TYRES: 385/55 R22.5 (ALL) ----DIMENSIONS * CARGO LENGTH: 13.5 M * CARGO WIDTH: 2.45 M * FRONT WALL HEIGHT: APPROX. 2.6 M ----* EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) Pgedjxtr Uqjpfx Adpjw * EXPORT SALES ONLY WITH DEPOSIT MIN. €500 - €2,000 ----EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS PLATES AND 15 DAYS AUSTRIAN PLATES EURO 1 TECH. DATA SHEET (DATI TECNICI) RESERVATIONS FOR VEHICLES ONLY VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID A deposit of at least €500.00 / €1,000.00 is required for sales to EU and third countries. (For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 is required) Subject to changes, errors, and prior sale! More vehicles can be found on our website. Sales are made exclusively in accordance with our General Terms and Conditions – see homepage Important Note – Important Information: Despite careful checking of all the details in our offer, mistakes may occur. Some errors might be caused by data transmission issues between different platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer as defined by §145 BGB. Rather, it provides information for contract initiation. The information provided here is without guarantee and does not represent warranted characteristics.

Stanje: novo, največja dovoljena obremenitev: 45.115 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Full equipment details available on request. Loading Platform: * Platform with approx. 30 mm thick hardwood floor * 8 pairs of outward-folding lashing rings (LC 10,000 daN) Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 385/65 R 22.5 TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit via the standardized EBS interface in accordance with ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and Suspension: * BPW axles, technical load capacity 10,000 kg each * 1st and 3rd axles hydraulically-mechanically steered, mounted on turntables; 2nd axle rigid * Air suspension with raise/lower valve * Axle tools Braking System: * Wabco braking system according to EU regulations with EBS-E (4S3M), without lines to the tractor unit Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S, & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * High-strength fine-grain steel construction Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Complete steel structure automatically shot-blasted after welding using a blast wheel system * Second blasting with corundum for optimal coating adhesion * Final coating with 2 layers of 2K topcoat, single colour, RAL 3002 Carmine Red according to RAL System 841GL * Rear section metallized and painted in RAL 9010 (Pure White) * Wheel rims in silver * Paint system tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Platform with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel bulkhead (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized connection rail at the front * 4 wheel chocks with holder on the bulkhead * Storage for approx. 1,000 mm plug-in stakes in the central support at the rear * At the gooseneck and rear plate, left and right, each with a holder for warning signs including socket * Yellow reflective tape according to EU regulations at the sides and rear of the trailer * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the external frame of the platform * European reflector plates (red-yellow) at the rear of the trailer * Holder for a rotating beacon at the rear of the trailer * One mud flap at the rear of the trailer * Manual and operating instructions on USB stick * Speed limit stickers 80 km/h at the rear and on both sides * Electro-hydraulic unit * 1 shunting coupling reinforced and bolted to end cross member * Load gauge for determining axle loads, including load chart * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump protection Pjdsxl Nf Repfx Adpegw * Remote steering from front and rear via cable remote control with push buttons, with single-track monitoring of the axles (without installation in the tractor unit) * 7 pairs galvanized plug-in stakes approx. 100 x 50 mm, approx. 1,000 mm high * 4 pairs of stake pocket rails, mounted transversely in the platform, for plug-in stakes approx. 100 x 50 mm * Spiral

Stanje: rabljeno, največja dovoljena obremenitev: 24.590 kg, skupna masa: 31.000 kg, konfiguracija osi: 2 osi, prva registracija: 06/2010, dolžina tovornega prostora: 13.620 mm, širina tovornega prostora: 2.480 mm, višina nakladalnega prostora: 700 mm, skupna širina: 2.550 mm, skupna višina: 2.750 mm, Oprema: ABS, ABS, EBS, BPW EcoPlus axle(s), last axle steered, TRIDEC steering, disc brake system, air suspension with raise/lower function, lift axle, phenolic plywood floor, 6 x stake pocket rails centrally on the loading area, continuous lashing holes in the outer frame, 2x storage boxes, vehicle may be covered with advertising stickers and/or lettering. Podpfxevnm Nij Adpegw Our offer does not generally include new TÜV certification. If a new TÜV inspection is required, we are happy to provide a quote through our partner workshops! Vehicle may be covered with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We are happy to offer you a financing or leasing proposal for this item. Please contact us!

Stanje: rabljeno, lastna masa: 6.970 kg, največja dovoljena obremenitev: 31.030 kg, skupna masa: 38.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2022, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, | Gsodam prikolica s količki | SAF osi | 1. os dvižna | 3. os krmiljena | Nosilec rezervnega kolesa | Medosne razdalje: 6200/1410/1410 mm | Dolžina tovornega prostora: 13.500 mm | Škatla za orodje | Pnevmatske gume: 385/65 R22,5 | Lastna teža: 6.970 kg, nosilnost: 31.030 kg | Količki x6 | Pridržujemo si pravico do napak, sprememb in predhodne prodaje. Pjdpfx Adoxiq Uhopogw

Stanje: rabljeno, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2024, naslednji pregled (TÜV): 06/2026, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including those available for immediate delivery or at short notice, can be found on our website. Extract from the specification. Full equipment details available upon request. Loading area: * Gooseneck, length approx. 4,100 mm, with central beam * Loading area manufactured as a double extension version, length approx. 9,400 mm, with pneumatically operated locking mechanism * A welded intermediate table, approx. 200 mm wide, is permanently attached to the central beam * Supply lines are protected within the extendable beams and automatically adjust to the respective loading area length (exception: supply of the first locking mechanism) * For tractors: 4 x 2 and 6 x 2 Axles and suspension: * BPW axles and suspension; all axles are hydro-mechanically force-steered and installed on turntables * Technical air suspension with lift and lowering valve Tyres: * 235/75 R 17.5 3PMSF dual tires * Make of our choice. Load index 143/141J (144/144F) Braking system: * Braking system by WABCO EBS-E, compliant with EU regulations Metallisation: * Complete HRM metallisation (High Resistance Metallisation) * Entire steel structure shot-blasted, then hot finished with ZINACOR 850 (Zinc 85% – Aluminium 15%) Paintwork: * 6-stage final treatment: the entire steel structure is shot-blasted after welding. One layer of zinc-based primer, one layer of adhesion primer. Final coating applied with two layers of 2-component (acrylic) paint, single colour, followed by cavity sealing with special wax * Trailer colour: RAL 3002 Carmine Red * Rim colour: Silver grey * Lamp panel colour: RAL 9010 Pure White Accessories included: * Steel front wall, approx. 1,600 mm high, certified version according to EN12642:2016 XL. Maximum load capacity: 20,000 daN * 4 pairs of recessed lashing rings in the external frame of the gooseneck: the 3 front pairs of lashing rings are lying flat (LC 10,000 daN), the rear pair is foldable outwards (LC 10,000 daN) * 4 pairs of stake pockets set into the outer frame of the gooseneck for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted at the rear of the gooseneck loading floor for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 4 wheel chocks with brackets in front of the front wall * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B, static tested load approx. 50,000 kg Pedpjw E A Egjfx Adpogw * On the gooseneck and loading area, approx. 32 mm wooden floor enclosed in aluminium omega profiles * On the large cross-section extension tube, a locking position every approx. 500 mm * On the small cross-section extension tube, a locking position every approx. 1,000 mm. Therefore, a locking option every approx. 500 mm is achieved * 10 pairs of recessed flat lashing rings in the outer frame of the loading area, foldable outwards: one pair before the last axle and one at the rear crossmember of the trailer (LC 10,000 daN each), all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets set into the outer frame of the loading area for insertable stakes approx. 100 x 50 mm * 3 transverse stake pocket rails mounted in the loading floor of the loading area for insertable stakes approx. 100 x 50 mm * 1 spare wheel holder under the loading area on the right in the direction of travel * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading area on the left in the direction of travel * Access ladder mounted on the right in the direction of tra

Stanje: rabljeno, lastna masa: 8.450 kg, največja dovoljena obremenitev: 26.550 kg, skupna masa: 35.000 kg, konfiguracija osi: 3 osi, prva registracija: 04/2007, vzmetenje: zrak, velikost pnevmatike: 385/65 R22,5, Oprema: ABS, Hangler ploščadni polpriklopnik 3 osi | vodilna os | BPW osi z disk zavorami | skupna masa 35.000 kg | nosilec rezervnega kolesa + rezervno kolo | orodjarna | izvlečno za 3 metre | pnevmatike: 385/65 R22,5 | Pridržujemo si pravico do napak, napačnih vnosov in predhodne prodaje. Podpfxewz Ekks Adpegw

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm Pgodjwvzg Ropfx Adpow * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: rabljeno, največja dovoljena obremenitev: 37.535 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full equipment details available upon request. Loading Platform: * Extendable loading platform with pneumatically actuated locking mechanism * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Follow-up steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Braking System: * Braking system compliant with EU regulations with EBS-E (2S2M) without interconnecting lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork: * Premium and long-lasting corrosion protection for the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) single-colour top coat finish in RAL 3002 carmine red * Silver rims * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings at the galvanised front connection panel * 4 wheel chocks with holders * 2-inch kingpin * Yellow reflector tape according to EU regulations, at the sides, on the extension, and rear of trailer * European reflector plates (red-yellow) at the rear of the trailer * Loading platform equipped with approx. 30 mm thick wooden floor, enclosed in omega profiles * 10 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame of the loading area Pedoxgk U Nopfx Adpjgw * Storage for up to 9 pairs of plug-in stakes approx. 100 x 50 mm, bolted to the inside of the front wall * 1 spare wheel holder under the loading platform, left side in the direction of travel, without spare wheel * 1 mudflap at the rear of the trailer * Manual and description on USB stick * One bracket for a warning beacon at the rear of the trailer * On the gooseneck and rear panel, each left and right, a bracket for warning boards including socket * 80 km/h speed label at rear and on both sides * Load manometer for axle load determination including load diagram * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container locks in the loading floor, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * Stainless steel toolbox, approx. 600 x 350 x 600 mm, under the loading platform, left side in direction of travel * 4 pairs of stake pocket rails mounted lengthwise on the loading platform, for plug-in stakes 80 x 50 mm * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading status * 2 LED reverse lights mounted on the rear panel * HRM metallisation (High Resistance Metallisation)

Stanje: rabljeno, največja dovoljena obremenitev: 38.080 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 02/2025, naslednji pregled (TÜV): 02/2026, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete equipment details available on request. Loading platform - Loading platform, extendable design with pneumatically operated locking - Loading area with approx. 30 mm thick wooden floor, enclosed in omega profiles - 7 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) Landing Legs: - JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (test load approx. 50 t) Axles - BPW axles and suspension - All axles hydro-mechanically forced-steered - With disc brakes - Technical axle load: 10,000 kg each (ET 0) - Air suspension with lift and lower valve - Axle tools Tyres - Tyres 385/65 R 22.5 Braking system - Braking system in accordance with EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Warning signs - Bracket for warning plates on both the gooseneck and rear wall, including socket Electrical system - Electrical system in accordance with EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front terminal strip with 24N, 24S & 15-pin sockets, connection according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction - Steel construction made from high-strength fine-grained steels - Steel grades S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork - First-class and durable corrosion protection of the standard shot-blasted welded frame ensured by a 2-component (2K) zinc dust primer - High-quality single-color 2-component (2K) topcoat in RAL 3002 Carmine Red - Wheels in silver; add-on parts per manufacturer’s specification - Rear section metallized and painted in RAL 9010 (pure white) Included accessories - 2-inch king pin - 4 wheel chocks with bracket on the bulkhead - Remote-controlled steering front and rear via cable remote, with axle single-track monitoring (no installation in tractor unit required) - Manual and documentation on USB stick - Electro-hydraulic power pack - Yellow-red air couplings on galvanized front terminal strip - Yellow reflective tape to EU regulation on sides, extension and rear of trailer - European reflective marking boards (red-yellow) on trailer rear - One mudflap at trailer rear - Bracket for beacon at trailer rear Pgjdpfxoxf Sifo Adpsw - 10 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading platform - 1 spare wheel carrier under platform, right side in driving direction - Speed sticker 80 km/h on rear and both sides - Load gauge for axle load determination including load chart - Galvanized steel bulkhead (EN12642-XL), approx. 1,600 mm high - 6 pairs of WADER container pockets in loading platform for 1 x 20', 2 x 20', or 1 x 40' container; for the extension, an additional locking position for a 45' container - 4 pairs of transverse stake pocket rails in the loading area for approx. 100 x 50 mm plug-in stanchions - Storage for removable stanchions inside bulkhead - Access ladder mounted left and right in driving direction - One INOX toolbox, approx. 1,200 x 460 x 550 mm, front left under platform - An additional tool ...

Stanje: rabljeno, največja dovoljena obremenitev: 32.340 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2024, naslednji pregled (TÜV): 07/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. Chassis * Welded construction made of high-quality steel profiles with punched profile cross members, designed for high point load Fifth Wheel Coupling * 2-inch kingpin Rear Underrun Protection * Bolted version, compliant with EU standards Side Underrun Protection * Compliant with EU standards Landing Legs * 2 x 12 t landing legs with compensating foot and single-side operation on the right in direction of travel Axles * 3 x 9 t air suspension axle assemblies * Disc brakes * Manufacturer: Gigant Brake System * Two-line compressed air brake system according to EU standards with EBS and RSS * Automatic load-dependent control * Spring brake cylinders as parking brake * Non-interchangeable coupling heads mounted solidly on front cross member, without connection line to the truck * Manufacturer: Wabco Tyres * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 ET 120 steel rims Mudguards * In accordance with EU standards * PVC mudguards before and after axle assembly Spare Wheel Carrier * 1 unit twin basket with mounting kit for one spare wheel with ET 120 Pgodpfxswbb Ufe Adpew Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.5 t * On the outer frame, drill holes for lashing straps every approx. 500 mm Front Wall * Reinforced steel construction, fixed * Inside lined with approx. 9 mm phenolic resin plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into outer frame Lighting System * In accordance with EU standards, 24 volts, with multi-chamber lights * LED side marker lights * LED position lights white at front * LED outline marker lights at rear * Number plate lights * 1 x 15-pin and 2 x 7-pin plug sockets on the front cross member Paintwork * Chassis and front wall blasted, primed, and painted in single color * Chassis: RAL 3002 Carmine Red * SSV: aluminium anodized * Rear underrun protection: white (RAL 9010) * Add-on parts: galvanized/KTL black * Rims: silver Optional Equipment * First axle liftable, with fully automatic load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets transverse to the cargo area * 20 stakes made of galvanized tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stakes inside front wall * 5 x 25 side walls and rear wall made of anodized aluminium hollow profiles, approx. 600 mm high, foldable and removable * Removable Kinnegrip stakes * Insertion rails for side walls and stakes under the chassis left and right * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Stanje: novo, največja dovoljena obremenitev: 56.570 kg, skupna masa: 66.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full specification available on request. Pgedpfjwx Dctjx Adpew Chassis: * Chassis frame construction made of welded longitudinal members and through-inserted crossmembers * Underrun nose approx. 700 mm wide * Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal members * Maximum crossmember spacing 400 mm (for longitudinally laid floor) * 3.5-inch kingpin according to SAE standard, exchangeable * Outer frame as UNP 200, open to the outside * Technical fifth-wheel load 26,500 kg Landing legs: * 24 t telescopic landing gear JOST -MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension units, each with 10 t load capacity * Lift and lowering device with 1 rotary slide valve Knorr/Wabco * Holder for lift and lowering device, bolted design Brakes: * Smartboard/TIM/Infocenter at the lift/lower control holder, in addition to the lift and lower valve, * Without battery (only operable with towing vehicle) * Holder for light and brake at the front on the underrun nose, overall height approx. 700 mm * Basic version tire pressure monitoring, connected to EBS CAN-bus system * With dual-release valve for brake and spring brake * Test nipple for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at the rear left in the driving direction * Wabco EBS brake system * EBS diagnostics via CAN-bus (EBS connector), no external diagnostic cable! Tires: * 8x 445/65 R 22.5 – premium brand of our choice * Centering sleeves Lubrication: * Grease nipple strips on the bogies and at the steering at the front. * No central lubrication system Body: * Without body certificate according to DIN EN 12642 XL * LED work lights, 2x mounted on top of the front wall (facing rear), switch on lift/lower control holder * Front wall for platform in heavy-duty design * Side contour markings yellow, rear yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: * Work lights 2x LED, mounted in lamp bar, controlled by reverse gear * Work lights 2x LED, controlled by reverse gear, 1x per side near landing legs * Reversing lights 2x LED, 1 per side in front of the 1st axle * Lighting/wiring system brand of our choice * Number plate illumination * The towing vehicle must provide sufficient power for the selected lighting (particularly reversing light) * Position lights at the front, bottom, white, 1 each on right and left (LED) * 24-volt lighting system with large multifunctional lamp * Side marker lights (LED), flashing * 1x 15-pin and 2x 7-pin front connection via multifunction box * EBS socket * 1 pair lane marking lights (LED) Floor: * Hardwood floor approx. 28 mm, alternating with galvanized omega steel profiles Painting/Coating (no metallic colors): * Chassis painted RAL 3002 carmine red * Front wall (steel construction) painted RAL 3002 carmine red * Axle hubs in chassis color * Axles and landing legs black * Wheels in aluminium/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates per side, welded into outer frame. Lashing capacity max. 3,000 daN * 12 per side...

Stanje: novo, največja dovoljena obremenitev: 63.960 kg, skupna masa: 76.500 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Excerpt from the equipment list. Full specification available on request. Chassis: * Welded construction made from high-quality steel profiles with through-profile cross members, designed for high point loads * Outer frame made of UNP steel Coupling Device / Fifth Wheel Load: * 2-inch king pin * Technical permissible fifth wheel load: 26,500 kg Underrun Protection: * Bolted version, compliant with EC regulations Side Impact Protection: * In accordance with EC standards Landing Legs: * Landing legs operable from one side, support load approx. 66 t / lifting capacity approx. 24 t Axles: * 5 x 10 t air suspension axle assembly, SAF make, with drum brake approx. 400 x 200 mm * ABS * Hub-centric 10-hole wheel mount, zero offset (ET 0) * Total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), control via rotary slide valve with locking function Steering: * 1 axle with forced steering at the front, 2nd axle rigid, 3rd, 4th, and 5th axles with mechanical forced steering (Tridec) * Lubrication points centrally externalized Axle Lift: * First and second axle automatically liftable, with additional switch-off on the chassis Brake System: * Two-line compressed air brake system per EC with EBS and RSS, automatic load-dependent control, Wabco 4S/3M * Spring-loaded cylinders as parking brake * Reverse-polarity-protected coupling heads fixed to the front cross member, without connection line to the tractor unit * Aluminum air reservoir Tires: * 10 x 445/65 R22.5 164J on 11.75 x 22.5 wheels, zero offset (ET 0) – brand at our discretion TPMS: * Tire pressure monitoring * TPMS compliant with ECE R141, data transfer to tractor unit Mudguards: * EC compliant: front on 1st axle, rear on 2nd, front & rear on 3rd, 4th, and 5th axles, each with 1/4 PVC fenders * Rear fenders with mud flaps Load Securing: * 5 pairs of folding lashing rings, evenly distributed (lashing capacity approx. 14 t) * 11 pairs of lashing plates welded in the outer frame (lashing capacity approx. 3 t) * 10 pairs of side lashing rings in the outer frame, evenly distributed (lashing capacity approx. 8 t) Stake Pockets: * 10 pairs of stake pockets recessed in the outer frame * 6 pairs of stake pockets recessed in floor (on external longitudinal beam) Pgjdpfx Adewx Dcaopjw Stakes: * 16 galvanized insertable stakes, approx. 80 x 80 x 8 mm, approx. 850 mm usable length Stake Magazine: * Magazine for 8 insertable stakes (80 x 80 mm) on each side in front of the bulkhead Bulkhead: * Bolted corner posts, filled with aluminum hollow profiles, internal full-width and height steel impact plate Floor: * Approx. 28 mm Z-hardwood floor recessed flush in the outer frame Lighting System: * EC compliant, 24 Volt with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * License plate lights * 1x 15-pin and 2x 7-pin socket on front cross member Equipment: * Two wheel chocks with holders * Warning sign acc. to ECE 70 * Work lamp on light carrier (activated by reverse gear) * Holder for rotating beacon at rear (incl. beacon) * 1 fixed access ladder on each side, incl. plug-in access aid * Smart Board * Warning decal: vehicle swing-out * Load center of gravity decal Paintwork: * Chassis and bulkhead sand-blasted and premium finish coated * Chassis: hot-dip galvanized + RAL color of your choice * Bulkhead: RA

Stanje: rabljeno, največja dovoljena obremenitev: 32.610 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, prva registracija: 10/2023, naslednji pregled (TÜV): 11/2025, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with those available immediately and at short notice on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with through crossmembers, designed for high point loads Coupling System: * 2-inch kingpin Underrun Protection: * Bolted design, compliant with EC regulations Side Guard: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and single-sided operation, positioned FR right Axles: * 3 x 9 t air suspension axle units * Disc brakes * Make: Gigant Brake System: * Two-line air brake system complying with EC, featuring EBS and RSS, automatic load-dependent braking force distribution * Spring brake cylinders as parking brake * Mix-up-proof coupling heads permanently mounted on the front beam, without connecting line to tractor unit * Make: Wabco Tyres: * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Holder: * 1 double basket with mounting kit for a spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.5 t * Outer frame drilled approx. every 500 mm for lashing straps Front Wall: * Reinforced steel construction, fixed * Interior covered with approx. 9 mm phenolic overlay plywood floor (approx. 1,250 mm high) Podpfx Aowyhy Ejdpogw Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Lighting System: * EC compliant, 24 volt, with multi-chamber tail lights * LED side marker lights * LED front position lights (white) * LED rear outline lights * Number plate lights * 1x 15-pin and 2x 7-pin sockets on front beam Painting: * Chassis and front wall cleaned by sandblasting, primed, and painted in solid color * Chassis: RAL 3002 carmine red * SSV: aluminum anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Rims: silver Incl. special equipment: * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * 20 stakes made from galvanized tube 80/50, total length approx. 1,000 mm * Interior of the front wall with magazine for 20 plug-in stakes * Container locks for 1 x 40' and 2 x 20' containers, flush with rear * Container locks for 1 x 20' container centered * Work lamp on lamp bracket (activated via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Stanje: novo, največja dovoljena obremenitev: 32.340 kg, skupna masa: 39.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and soon available vehicles on our website. Excerpt from the equipment. Full specification on request. Chassis: * Welded construction made from high-quality steel profiles with punched profile cross-members, designed for high point loads Towing device: * 2-inch king pin Landing legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right in driving direction Axles: * 3 x 9 t air suspension axle units * Disc brakes * Manufacturer: SAF, with disc brakes approx. 430 x 45 mm * ABS * Centrally aligned wheel studs, 10-hole with ET 120 * Total air suspension travel approx. 200 mm, of which raise approx. 140 mm and lower approx. 60 mm, controlled by rotary slide valve with detent function Brake system: * Two-line compressed air brake system according to EU regulations with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Non-interchangeable coupling heads securely mounted to the front cross-member, without connecting line to the tractor unit Tyres: * 6-x 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, manufacturer of our choice Mudguards: * According to EU regulations, ? PVC mudguards in front of and behind the axle units Spare wheel carrier: * 1 piece double basket with mounting material for one spare wheel with ET 120 Load securing: * 9 pairs of folding lashing rings, evenly distributed, traction approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, traction approx. 2.5 t * In the outer frame approx. every 500 mm a hole for tie-down straps Front wall: * Reinforced steel structure, fixed * Interior lined with approx. 9 mm phenolic-coated plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame Lighting system: * According to EU regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED contour lights rear * Licence plate lights * 1x 15- and 2x 7-pin sockets at the front cross-member Equipment: * ECE 70 warning plate * Bracket for rotating beacon (without beacon) Painting: * Chassis and front wall sandblasted, primed, and painted in one colour * Chassis: RAL 3002 carmine red * Dropsides: anodised * Dropside stanchions: RAL 3002 carmine red * SSV: Aluminium anodised * Hubs: Cataphoretic dip primed (KTL) * Rear underrun guard: white (RAL 9010) * Mounted parts: galvanised/KTL black * Rims: silver Accessories: * First axle liftable, with fully-automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly spaced * 4 rows of stanchion pockets across the loading platform * 20 stanchions made of galvanised tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions inside front wall * Dropsides: 5 x 250 mm aluminium hollow profile dropsides and rear wall, anodised, foldable and removable, detachable Kinnegrip stanchions * Dropside and stanchion magazine: left and right under chassis slide-in rails for dropsides and stanchions * Container locks for 1 x 40? and 2 x 20? containers rear flush, container locks for 1 x 20? container in the middle Pgedpfxewx Db Ao Adpsw * Worklight at lamp bracket * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm * Air suspension Safety: ABS * EBS * Disc brakes Extras: Rental possible

Stanje: novo, največja dovoljena obremenitev: 52.810 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, featuring vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment features. Full equipment details available upon request. Loading platform: * Platform with approx. 30 mm thick hardwood floor * 10 pairs of hinged external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system in compliance with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For proper display, the tractor unit must be capable of transmitting and displaying this data. Axles and suspension: * BPW axles, technical load capacity 12,000 kg each, first axle rigid, all other axles hydro-mechanically force-steered, mounted on turntables * Air suspension with lift and lower valve * Axle tools Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connection according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Braking system: * Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor Steel construction: * Steel structure made of high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (Yield strength 355MPa), S690QL/S700MC (Yield strength 690MPa) Painting: * Entire steel structure automatically shot-blasted after welding using a blasting wheel system * Second blasting with corundum for optimal adhesion of the coating system * Final coating with 2 layers of two-component topcoat, single colour in RAL 1007 Daffodil Yellow, as per RAL 841GL system * Rear section metallized and painted in RAL 9010 (Pure White) * Rims Silver Grey * Paint system tested in salt spray test according to ISO 9227-NSS * All cavities sealed with special wax Including accessories: * Platform with approx. 30 mm thick hardwood floor * 2 inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanized front connection strip * At the gooseneck and rear plate left and right one bracket each for warning signs including socket * Steering from front and rear via wired remote control with push buttons, with axle tracking control (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes on the outer frame of the platform * Load pressure gauge for axle load determination including load diagram * Lift axle on the front axle controlled by TEBS E * 5 pairs of stake pocket strips across the platform for approx. 100 x 50 mm plug-in stakes * One INOX toolbox 1,200 x 460 x 550 mm, mounted at the front left underneath the platform (in direction of travel) * 1 tow coupling with reinforcement bolted to the rear crossmember * BEKAMAX central lubrication system (Pico) with NLGI-2 standard grease and removable protection for the pump Pedpfx Adjxttc Aopjgw * 2 LED reversing lights mounted on the rear plate * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum)

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, Our complete range of vehicles with immediate and short-term availability can be found on our website. Extract from the specification. Full equipment list available on request. Chassis: * Welded construction using high-quality steel profiles with through cross members, designed for high point loads * Underrun nose width approx. 700 mm * Outer frame as UNP profile * Scuff plate approx. 8mm * Neck height at the front approx. 130 mm Towing Equipment * 2-inch kingpin Underrun Protection * Bolted version, compliant with EC regulations Side Impact Protection * According to EC, made from anodized aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating foot and single-sided operation on front right Axles * 3 x 9 t air suspension axle units * 22.5" disc brakes * Total stroke approx. 180 mm * Lifting and lowering device operated by rotary slide valve Braking System * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-loaded cylinders as parking brake * Non-interchangeable coupling heads permanently mounted on the front crossmember, without connecting line to the truck Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET120 * Brand of our choice * Tyre pressure monitoring (TPMS) via EBS CAN bus system Mudguards * According to EC Spare Wheel Carrier Pgodpeugqvfjfx Adpjw * Not included Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, tractive force approx. 2.0 t * Holes for lashing straps in the outer frame at approx. 400-600 mm intervals Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Inner cladding with phenolic resin plywood, approx. 9 mm, height approx. 1,250 mm Floor * Approx. 28 mm hardwood floor set into the outer frame using galvanized omega steel profiles Lighting System * According to EC, 24 volt, with multi-chamber lights * LED side marker lights * LED position lights, white, front * LED outline marker lights, rear * License plate lights * Lane marker lights, LED * 1x15- and 2x7-pin socket connectors on the front crossmember Equipment * 2 wheel chocks with holder * ECE 70 warning plates * Holder for rotating beacon including rotating beacon * 2 rubber buffer stops at rear * Foldable and extendable access ladder at the rear right (without platform) * 1 open mesh box, transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanized, located behind the axles Paintwork * Front wall: single RAL color of your choice * Chassis: hot-dip galvanized * Outer frame: hot-dip galvanized + single RAL color of your choice * Side protection: aluminium anodized * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanized/KTL black * Wheel rims: silver * Contour marking: complete yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in outer frame, evenly distributed * 4 rows of stanchion pockets transversely to loading area * 20 pieces of stanchions made of galvanized tube 80/50, total length approx. 1,200 mm * Magazine for 20 plug-in stanchions on inside of front wall * Container locks for 1 x 40’ and 2 x 20’ containers, flush with the rear * Container locks for 1 x 20’ container centered * Work light at lamp bracket (activated in reverse gear) * 2 stainless steel toolboxes, approx. 600x500x500 mm, 1 eac

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Extract from the equipment. Complete equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads * Underrun beam approx. 700 mm wide * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm * Neck height at the front approx. 130 mm Coupling Equipment * 2-inch king pin Underrun Protection * Bolted version according to EC regulations Side Impact Protection * According to EC regulations, made from anodised aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR) Axles * 3 x 9 t air suspension axles with disc brakes, 22.5" * Total lift approx. 180 mm Podpfx Adsw U H Sbjpsgw * Lifting and lowering device via rotary valve Brake System * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Mudguards * According to EC regulations Spare Wheel Carrier None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t * In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles Lighting System * According to EC regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED outline lights rear * Licence plate lights * Lane marker lights, LED * 1x15- and 2x7-pin plug sockets at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning signs * Bracket for rotating beacon, incl. rotating beacon * 2 rear rubber buffer stops * Access ladder rear right, foldable and extendable (without platform) * 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: single-colour RAL as per request * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single-colour RAL as per request * Centre stanchions: single-colour RAL as per request * Side underrun protection: aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver Contour Marking * Complete, yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm * Internal magazine for 20 plug-in stanchions on the front wall * 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion