Anfas nakup rabljenega (63)

Stanje: novo, moč: 350 kW (475,87 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 6.500 mm, višina nakladalnega prostora: 600 mm, skupna širina: 2.500 mm, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Internal reference for inquiries: 2-252 / IMMEDIATELY AVAILABLE!----MERCEDES-BENZ ACTROS 2548 L CONTAINER FLATBED WITH FASSI F545RA.2.28 xe-dynamic HEAVY-DUTY CRANE Loader crane: * FASSI F545RA.2.28 xe-dynamic – at 20.8 m, this crane still lifts 1,650 kg (can be extended with two manual extensions up to 24.9 m and 700 kg) * Endless slewing range * Double linkage system with PROLINK (overbending jib up to 15 degrees) * FASSI stability control * Radio remote control with linear levers and outreach display * XF System (Extra Fast) * XP System (Extra Power) * FL System (Full Lift) * Outrigger operation via remote control * LED work lights * Winch preparation (Fassi V30 winch fully retrofittable at any time) * And much more Vehicle: * Flatbed loading length 6,500 mm, loading width 2,480 mm * Outer frame profile made of steel with lashing points spaced approx. 250 mm apart * Aluminum-SL profile side board * 4x container locks as pull-outs, LAXO model with locking pins, galvanized, extendable for 3 m containers * Telescopic overwidth marker lights with clearance lights * Toolbox 1,200 x 600 x 600 mm * Chain box 800 x 600 x 300 mm * L DRIVER’S CABIN STREAMSPACE, 2.50 M, FLAT FLOOR * ENGINE OM471, R6, 12.8 L, 350 KW (476 HP), 2,300 Nm * HIGH PERFORMANCE ENGINE BRAKE * SECONDARY WATER RETARDER * TRANSMISSION G 281-12/14.93-1.0, MERCEDES POWERSHIFT 3 * TRAILING AXLE, 8 T, STEERED, LIFTABLE, RELIEVABLE * AIR SUSPENSION FRONT/REAR * DRIVE 6X2 * FUEL TANK 630 L, ADBLUE TANK 60 L * CENTRAL AXLE TRAILER COUPLING, D50, RINGFEDER * DRIVER’S COMFORT AIR SUSPENSION SEAT * COMFORT BED, LOWER * REFRIGERATOR * LEATHER STEERING WHEEL * ELECTRIC SINGLE-PIECE SUN BLIND, WINDSCREEN Gedoxnn Eujpfx Ah Deuh * MULTIMEDIA COCKPIT, INTERACTIVE * DIGITAL RADIO * NAVIGATION SYSTEM * LED DAYTIME RUNNING LIGHTS * PREDICTIVE POWERTRAIN CONTROL * LANE KEEPING ASSIST * DISTANCE CONTROL ASSIST * ATTENTION ASSIST * TRAFFIC SIGN ASSIST * ACTIVE BRAKE ASSIST 5 * CRUISE CONTROL * HILL START ASSIST, SPEED LIMITER 30 KM/H * ATS WARRANTY ACCORDING TO TERMS & CONDITIONS, 3 YEARS/450,000 KM * And much more Financing / hire purchase, as well as leasing / partial amortization leasing available with our leasing partner. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Stanje: rabljeno, prevoženi kilometri: 143.000 km, moč: 185 kW (251,53 KM), vrsta prenosa: mehanski, vrsta goriva: dizel, barva: zelen, skupna masa: 15.000 kg, konfiguracija osi: 2 osi, prva registracija: 05/2015, emisijski razred: Euro 6, Leto izdelave: 2015, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, žerjav, * IVECO 150E25 4x4 prekucnik z dvigalom * Nadgradnja Meiller dvostranski prekucnik * Zadnje dvigalo Fassi F70A.0.22 * Daljinsko upravljanje * Grabilka * Euro6 * Ročni menjalnik * Listnato vzmetenje spredaj in zadaj * Vlečna kljuka * 3-sedežna kabina Gjdpfjw Iknmex Ah Deuh * Klimatska naprava * Električna okna

Stanje: novo, prevoženi kilometri: 400 km, moč: 367 kW (498,98 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, emisijski razred: Euro 6, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, navigacijski sistem, parkirni grelec, Tatra Phoenix 6x6x6 All-wheel drive with Fassi crane featuring jib and winch Brand-new vehicle with day registration 07/2024 Long-distance driver’s cab Removable flatbed Can be used as a tractor unit Technical details of the Tatra will follow shortly. Crane: Fassi F545RA2.27 Stability control system V7 remote control Jib / additional articulated arm L214, 4 extensions V20 cable winch with 60 m cable AWC Gujdpfx Ahoxmn Ite Dsh Front stabilizers 5-point support etc. Further information will follow shortly.

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 18.730 km, moč: 129 kW (175,39 KM), prva registracija: 12/2020, vrsta goriva: dizel, barva: oranžna, konfiguracija osi: 4x2, gorivo: dizel, zavore: zaviranje z motorjem, voznikova kabina: dnevna kabina, vrsta prenosa: mehanski, emisijski razred: Euro 6, vzmetenje: jeklo, Leto izdelave: 2020, Oprema: filter saj, spojka prikolice, žerjav, = Further Options and Accessories = - Leaf suspension - Power brake booster - Electric windows - Remote central locking - Low noise emission - Fog lights - Particulate filter - Radio/CD player - Side door - Toolbox = Further Information = Technical Information AdBlue system: Yes Suspension: Leaf springs Front axle: Steered Weights Unladen weight: 4,460 kg Payload: 3,030 kg Gross vehicle weight: 7,490 kg Functional Crane: Fassi F50A, year of manufacture 2020, mounted behind the cab Maintenance, History and Condition Technical inspection (APK): valid until 10/2026 Technical condition: very good Visual condition: very good Identification Reference number: 05 Further Information Please contact Emad Al Shogran for more information. Vehicle number: 05 Mitsubishi Fuso 7C18 / Tipper with Fassi F50A Crane / Eu6d VIN: TYBFEB71ELDC06540 MOT valid until: 10/2026 Gedpfxsxmgh Ej Ah Deuh Suspension: Leaf/Leaf Transmission: Manual gearbox Engine brake Cruise control Distance assist Lane assist Tow bar Emission standard EURO 6d 3-way tipper Crane: Brand: Fassi Type: F50A Year: 2020 = Company Information = Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Stanje: rabljeno, prevoženi kilometri: 179.500 km, moč: 175 kW (237,93 KM), skupna masa: 18.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 4x2, največja dovoljena obremenitev: 7.150 kg, lastna masa: 10.850 kg, gorivo: dizel, medosna razdalja: 5.500 mm, zavore: zaviranje z motorjem, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, dolžina tovornega prostora: 6.000 mm, višina nakladalnega prostora: 800 mm, prva registracija: 11/2019, Oprema: ABS, filter saj, klimatska naprava, nizka raven hrupa, računalnik na krovu, registracija tovornjaka, tempomat, zapora diferenciala, žerjav, Mercedes-Benz Actros MP5 1824 keson s dvigalom Letnik 2020 WDB...391913 Prva registracija: 11/2019 Samo 179.500 km z dokazili Emisijski razred Euro6 Kratka kabina Avtomatski menjalnik Mirror Cam Pomočnik za ohranjanje voznega pasu Tempomat z ohranjanjem razdalje Klimatska naprava Vozilo v celoti na zračni blazini Pnevmatike 315/60 R22.5, profil cca 60 % Medosna razdalja 5500 mm Keson 6000 mm Lastna teža 10.850 kg Dvigalo Fassi F155 Dynamic Leto izdelave 2019 Daljinsko upravljanje (radio upravljanje) Vključno z rotatorjem 3 hidravlični izvleki 2,50 m/ 4800 kg 4,50 m/ 3170 kg 6,35 m/ 2150 kg Guedpexlu Svofx Ah Djh 8,30 m/ 1590 kg 10,35 m/ 1260 kg Višina kljuke cca 14 metrov Vozilo je iz prve roke in v ohranjenem stanju. Izvoz/neto cena: 69.900 EUR Vse informacije brez garancije, napake so možne.

Stanje: rabljeno, prevoženi kilometri: 549.789 km, moč: 397 kW (539,77 KM), skupna masa: 35.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2020, prva registracija: 08/2020, Oprema: ABS, klimatska naprava, žerjav, Interne Fahrzeugnr.: VTC9027 Gujdjxhaqpopfx Ah Deh Deutsches Fahrzeug Auf unserem Hof in Kaufungen - Kassel, sofort zur Verfügung Mehr INFO unter * Luis Lucena (Deutsch, English, Español, Français) *Viktoria Sologubova (Polnisch, Russisch, Ukrainisch, English) SCANIA R540 8x2/4NB Aufbau mit FASSI F365 A.2.28 E-DYNAMIC Aufbaumaße: Länge 5800 mm, Breite 2500 mm, Seiten 800 mm Lastmoment 325 kNm Maschinenlänge 2,53 m Maschinenbreite 1,33 m Maschinenhöhe 2,43 m Max. Standardreichweite 20,75 m Tragfähigkeit 0,53 t bei max. Reichweite 24,75 m Gewicht 5,38 t Max. Tragfähigkeit 12 t bei max. Reichweite 2,6 m Modellreihe A Irrtümer vorbehalten Gerne nehmen wir Ihr gebrauchtes Fahrzeug in Zahlung. Finanzierung direkt bei uns im Hause möglich. GOLEC NUTZFAHRZEUGE GMBH Wir sprechen: Deutsch, English, Spanish, Polnisch, Ukrainisch, Russisch, Bulgarisch. ----.

Stanje: novo, moč: 353 kW (479,95 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, širina tovornega prostora: 2.420 mm, dolžina tovornega prostora: 5.200 mm, Leto izdelave: 2025, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Internal reference number for customer inquiries: 5-060 ---Ideal for low-loader transport, etc.!!! Trailer load 30,000 kg!!! MAN TGS 28.480 6x4-4 BL Three-way tipper with FASSI F195 loader crane Loader Crane: * FASSI F195A.2.24 e-dynamic * Lifting moment: 162 kNm (16.51 mt) * Hydraulic quadruple extension, 12.7 m reach * e-dynamic hose equipment for 2 auxiliary devices * Slewing angle: 400° Godpfx Ahjxnn Txe Deuh * Dual linkage system with PROLINK (overbendable knuckle boom up to 15°) * Electronic overload shut-off system with FX 500 * FASSI stability control FSC incl. LMB II * Fassi RCS radio remote control maxi – 6 functions with 3 joysticks (2-2-2) * Special outrigger system, support width 6.64 m, hydraulically extendable incl. FSC * Outriggers operable via remote control * FL System (Full Lift) – switchable fast-travel valve for extensions * LED work lights Vehicle: * Suspension: leaf/air * Drive: 6x4-4 * MAN D26 diesel engine, 480 HP, Euro 6e * MAN TipMatic automatic transmission * Operation: MAN TipMatic with steering column lever, manual (DNR selection, gear strategy selection) * Front axle: Outboard planetary, driven, selectable * Tag axle: 9,000 kg, non-driven, steered, liftable * Differential locks on drive rear axle + front axle * Main wheelbase 3,600 mm, 1,400 mm wheelbase between rear axle and tag axle * 310 L fuel tank, 35 L AdBlue tank * Digital axle load indicator (ALM) for air-suspended axles * Cab type NN: The practical option (narrow, medium length, standard height) * Electrically operated front windshield sunblind, interior * Driver comfort seat, air-suspended, with lumbar support and shoulder adjustment * MAN EasyControl panel, 2 functions, operable from outside when door is open * MAN 12.3" Professional navigation media system * Europe and Russia navigation maps * Online traffic for navigation function * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Standard drivetrain warranty extension for 3rd year of operation up to 450,000 km (conditions, see maintenance record) * and much more. Superstructure: Three-way tipper superstructure with FASSI F195A.2.24 e-dynamic crane mounted directly behind the cab (Top-end crane configuration: radio remote control, hydraulic outriggers operable via remote, work lights, etc.) Drop-side Body: * Dimensions LxWxH: 5,200 mm x 2,420 mm x 800 mm * (Alternative available: loading space length 4,800 mm x 2,420 mm x 800 mm) * Headboard: 1,000 mm high Undercarriage: Undercarriage executed as a solid steel welded construction, two longitudinal beams with crossmembers supporting the 5 mm tipper profile and a 5 mm Hardox or Naxtra floor plate. A 1,000 mm high steel headboard, fixed, with 2 lashing eyes inside, plus additional outer lashing eyes at half height; fixed corner stanchions with bottom-mounted locks. Rear and sidewalls (one piece, full length) made from aluminum hollow profiles; sidewalls foldable and swinging with drop-side lifting aid. Tailgate also foldable and swinging, centrally locked within the tipper profile. Floor plate from Hardox or Naxtra, thickness 4 mm, clean welded to the tipper profile and longitudinal/crossmembers. Press traverse and tipping arms recessed and reinforced within the longitudinal beams. Lashing eyes (4 per side), distributed along the outer tipper floor length. Steel structure in grade St 52-3. All steel parts sand-blasted, superstructure parts painted in RAL 9016, etc.

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 20 mm Rotational speed 2850 rpm Angle range 0 - 60° (stepless) Machine weight approx. 19.5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for so-called FACING – the removal of an unwanted material layer on the end face of the workpiece, such as occurs during flame cutting of sheet metal. Specifically developed for producing visible bevels and weld seam preparations. Powerful electric drive for extreme loads. * High-performance motor * Stepless adjustment of the working angle in the range of 0° - 60° * FACING – edge processing at 0° angle for removing unwanted material layers after flame cutting * Unique mechanical scale for setting chamfer width for greater precision * Very compact and ergonomic design for high working productivity * Surrounding protective frame to prevent damage and provide versatile grip options * With suitable accessories, pipes from D=150 mm can also be machined * Additional adjustable handle - Chamfer width (hypotenuse): 0 - 20 mm = 400 MPa / 0 - 16 mm = 400 MPa - Motor: 1100 W Gedpoppgcvofx Ah Djuh We are also pleased to offer you an optional pipe beveling attachment (D=150mm) for this device.

Stanje: novo, prevoženi kilometri: 500 km, moč: 382 kW (519,37 KM), skupna masa: 32.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, MAN 35.520 tractor unit with removable flatbed and crane * Hydrodrive * 3-axle, steerable * Removable flatbed including stake pockets and container locking system * Sliding fifth wheel * Long-distance driver’s cab * Air suspension * Trailer coupling * Crane: Fassi F800 RA2.28 (year of manufacture 2007), fully overhauled * UVV safety inspection * 8-fold extension * 360° front stabilizers – 100% * No outrigger monitoring * Prepared for winch installation; winch can be supplied on request (+ €13,000) * Tool box * etc. * Further information and complete specification available on request Gujdpfxswd Appe Ah Doh

Stanje: rabljeno, prevoženi kilometri: 179.500 km, moč: 175 kW (237,93 KM), prva registracija: 11/2019, skupna masa: 18.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 4x2, največja dovoljena obremenitev: 7.150 kg, lastna masa: 10.850 kg, gorivo: dizel, medosna razdalja: 5.500 mm, zavore: zaviranje z motorjem, voznikova kabina: dnevna kabina, vrsta prenosa: samodejen, emisijski razred: Euro 6, vzmetenje: zrak, dolžina tovornega prostora: 6.000 mm, višina nakladalnega prostora: 800 mm, Oprema: ABS, filter saj, klimatska naprava, nizka raven hrupa, računalnik na krovu, registracija tovornjaka, tempomat, zapora diferenciala, žerjav, Mercedes-Benz Actros MP5 1824 z nadgradnjo - prekucnik in dvigalo Modelno leto 2020 WDB...391913 Guodsxlu Spjpfx Ah Dsh Prva registracija: 11/2019 Samo 179.500 km z dokazili Emisijski razred Euro6 Kratka kabina Avtomatski menjalnik Mirror Cam Asistent za ohranjanje voznega pasu Prilagodljivi tempomat Klimatska naprava Vozilo popolnoma zračno vzmeteno Pnevmatike 315/60 R22.5, profil cca 60% Medosna razdalja 5500 mm Nadgradnja (prekucnik) 6000 mm Lastna teža 10.850 kg Dvigalo Fassi F155 Dynamic Leto izdelave 2019 Daljinsko upravljanje (radio upravljalnik) Vključno z rotatorjem 3 hidravlični iztegi 2,50 m / 4.800 kg 4,50 m / 3.170 kg 6,35 m / 2.150 kg 8,30 m / 1.590 kg 10,35 m / 1.260 kg Višina kljuke cca 14 metrov Vozilo je iz prve roke in je v dobro vzdrževanem stanju. Izvoz/neto cena: 69.900 evrov Vse informacije brez garancije, pridržujemo si pravico do napak.

Stanje: rabljeno, prevoženi kilometri: 549.789 km, moč: 397 kW (539,77 KM), prva registracija: 08/2020, skupna masa: 35.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 6, Leto izdelave: 2020, Oprema: ABS, klimatska naprava, žerjav, Interne Fahrzeugnr.: VTC9027 Deutsches Fahrzeug Auf unserem Hof in Kaufungen - Kassel, sofort zur Verfügung Guedpfxexhaqvs Ah Dsh Mehr INFO unter * Luis Lucena (Deutsch, English, Español, Français) *Viktoria Sologubova (Polnisch, Russisch, Ukrainisch, English) SCANIA R540 8x2/4NB AUFBAU MIT FASSI F365 A.2.28 E-DYNAMIC Aufbaumaße: Länge 5800 mm, Breite 2500 mm, Seiten 800 mm Lastmoment 325 kNm Maschinenlänge 2,53 m Maschinenbreite 1,33 m Maschinenhöhe 2,43 m Max. Standardreichweite 20,75 m Tragfähigkeit 0,53 t – bei max. Reichweite 24,75 m Gewicht 5,38 t Max. Tragfähigkeit 12 t – bei max. Reichweite 2,6 m Modellreihe A Irrtümer vorbehalten Gerne nehmen wir Ihr gebrauchtes Fahrzeug in Zahlung. Finanzierung direkt bei uns im Hause möglich. GOLEC NUTZFAHRZEUGE GMBH Wir sprechen: Deutsch, English, Spanish, Polnisch, Ukrainisch, Russisch, Bulgarisch.

Stanje: novo, moč: 346 kW (470,43 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 6, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 6.600 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Internal reference number for customer inquiries: 1546/IMMEDIATELY AVAILABLE ----Multiple units in stock! MAN TGX 26.470 Construction Platform Truck with Loading Crane PALFINGER PK 22002 EH or FASSI F235 IMMEDIATELY AVAILABLE! PK 22002-EH ? PALFINGER HIGH PERFORMANCE TRUCK-MOUNTED LOADING CRANE - Lifting moment: 205.0 kNm (20.9 mt) - Classification HC1 HD4/B3 according to EN12999 - High-speed extension system with oil return and internal oil passage - Dual linkage with Power Link Plus 15° - Slewing system with slewing cylinders - Slewing range 400° - Electronic HPLS control unit (for two pressure ranges) - Individual outrigger control with unlockable check valves on the stabilizer cylinders - Spiral hose from base frame to main boom - Spirit level at both control stations - Available from stock with 4-stage and 6-stage extensions or Fassi F235 Loading Crane: * F235A.2. e-dynamic * Lifting capacity at 12.7 m: 1,345 kg, or at 17.1 m: 740 kg * Slewing range 400° * Dual linkage system with PROLINK (over-bending knuckle boom up to 15°) * Electronic overload cut-off device with FX500 * Fassi RCS Radio remote control maxi - 6 functions » with 3 joysticks (2-2-2) * Emergency stop and optical alarm (90% and 100%), incl. digital slewing limitation adjustable * FASSI stability control FSC incl. LMB II * Control system for 2 additional functions with »2 hose guides / e-dynamic * Available from stock with 4-stage and 6-stage extensions Body: * Platform body: dimensions 6,600 x 2,480 x 1,000 mm * Side boards split once (2 flaps) per side, with side board relief * Subframe: lattice frame, hot-dip galvanized * Slotted frame for optimal load securing * Toolbox Vehicle: * Flatbed with crane * MAN diesel engine 02676 LFAI, 346 kW (470 hp) power, 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 DD automatic transmission with retarder 35 * Retarder Eco, speed-dependent, adjustable, energy-efficient * High-performance engine brake MAN EVBec, adjustable * Protected disc brakes, suitable for off-road use * Drive 6x2-4 * Suspension type leaf/air (BL) * 4,800 mm main wheelbase, 1,350 mm wheelbase between rear axle and trailing axle * 590 L fuel tank capacity, 60 L AdBlue tank capacity * Steerable and liftable trailing axle * Trailer coupling RINGFEDER type 4040/G150B, 40 mm drawbar eye * GM cab: the spacious one (wide, long, medium height) * Comfort mattress, bottom, 110 mm * Pull-out refrigerator and drawer * Air-suspended driver's comfort seat with lumbar support and shoulder adjustment * Electric glass lift roof Guodpsxnn Iiefx Ah Dsh * LED lighting * MAN EasyControl control panel, 4 functions, operable from outside when door is open * MAN Media System Navigation Professional 12.3-inch * MAN Advanced sound system with subwoofer * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct access buttons * Lane departure warning LDW * MAN AttentionGuard driver alertness assistant * Emergency brake assist EBA * Standard driveline warranty extension for 3rd year of operation up to 450,000 km, see maintenance records for details * and much more. Financing / hire purchase as well as leasing / partial amortization leasing possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 18 mm Angle range 15° - 50° Machine weight approx. 110 kg Beveling System UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker is one of the most powerful automatic-feed beveling machines available on the market. It is suitable not only for workshop use but also for on-site assembly. The machine features a stepless adjustable bevel angle system. Thanks to its specially designed drive system, the UZ18 Hardworker is suitable for tougher materials as well. The machine is equipped with automatic feed, making operation with the UZ18 Hardworker highly comfortable. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 70 x 150 x 6 mm * Suitable sheet thickness range: 6 – 40 mm * The bevel angle can be easily and steplessly adjusted from 15° to 50° without the need to replace any parts * Double-sided beveling (X, K geometry) without material handling Gsdek Egrtepfx Ah Deuh * Easy connection to a 3D manipulator for simplified operation and handling * Silent operation * Equipped with automatic feed * Suitable for stationary or mobile use * The machine processes large workpieces without additional support at a speed of 1.9 m/min * Smaller workpieces are inserted directly into the machine - Max. bevel width (hypotenuse): 18 mm - Steplessly adjustable angle: 15° - 50° - Sheet thickness range: 6 – 40 mm - Motor: 750 W - Feed speed: 1.9 m/min - Weight: 110 kg - Dimensions: 438 x 719 x 644 mm We are happy to offer you an optional mobile 3D manipulator for this unit upon request.

Stanje: novo, prevoženi kilometri: 500 km, moč: 382 kW (519,37 KM), skupna masa: 32.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, Leto izdelave: 2025, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, MAN 35.520 tractor unit with removable flatbed and crane * Hydrodrive * 3-axle, steered * Removable platform, including stake pockets and container locks * Sliding fifth wheel * Long-distance driver’s cab * Air suspension * Trailer hitch * Crane: Fassi F800 RA2.28, year 2007, fully overhauled Guedpfjwd Apiox Ah Doh * UVV-tested (accident prevention regulation) * 8-fold extension * 360° front stabilizer - 100% * Without outrigger monitoring * Prepared for cable winch, delivery with cable winch possible on request (+ €13,000) * Toolbox * etc. * Further information and full equipment details available on request

Stanje: novo, moč: 235 kW (319,51 KM), skupna masa: 18.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 2 osi, vrsta prenosa: samodejen, širina tovornega prostora: 2.420 mm, dolžina tovornega prostora: 4.000 mm, višina nakladalnega prostora: 600 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Internal reference for customer enquiries: 5-006 / Immediately available IMMEDIATELY AVAILABLE AT SPECIAL PRICE MAN TGM 18.320 4x4 BB WITH MEILLER-TRIGENIUS TIPPER BODY WITH FASSI OR PALFINGER CRANE A vehicle suitable for landscaping, road construction, construction site transport, or as a municipal vehicle! (ALSO AVAILABLE IN ORANGE) Crane options: FASSI F135AC.0.24 dynamic (4 hydraulic extensions) * Max. outreach: 10.85 m * Slewing range: 390° * Stabilizer spread: 4.37 m, hydraulic stabilizers * All hydraulic cylinders double-acting * Piston rods hard-chromed * Electronic overload cut-off system with FX500 emergency stop, plus optical alarm at 90% and 100% * FASSI Stability Control FSC-M/1 incl. load moment indicator, pressure limiting and load-holding valves * Control block with 4 control valves, operable from both sides * Control system for 2 auxiliary functions with 2 hose guides, e.g. for grab operation * Fassi RCS radio remote control – 6 functions with 3 joysticks (2-2-2) * 1 LED work light mounted on knuckle boom * Work lights can be controlled via RCH / display (1 black/white function) * Additional work light Alternatively, the following loader crane: * Palfinger PK 14.501 K SLD 5 * PALFINGER SOLID TRUCK-MOUNTED CRANE with KTL coating * Hydraulic fourfold extension – 11.7 m * Lifting moment: 142.4 kNm (14.5 mt) * Slewing range: 420° * Electronic overload protection PALTRONIC incl. emergency stop and load indicator * Operating hours counter with service interval display * Scanreco radio remote control * Load and overload display via PALTRONIC on remote control * 5 selectable speeds Vehicle specifications: * MAN TGM 18.320 4x4 BB truck-mounted crane tipper * Tipper body 4,200 x 2,420 mm, manufacturer MEILLER, model TRIGENIUS (new series) * Front wall height: 800 mm * Side wall height: 600 mm * Fully recessed lashing eyes in the body floor * Cab type CC: compact (narrow, short, standard height) * Wheelbase: 3,875 mm * Suspension: leaf/leaf (optionally leaf/air at front) * Drive: 4x2 Guodpfx Ajxnn Ivsh Doh * Tyres: front axle 2x 295/80R22.5, rear axle 4x 295/80R22.5 * Gross vehicle weight: 18,000 kg * MAN TipMatic automatic transmission * Diesel engine MAN D0836 LFLAP, output 235 kW (320 hp), torque 1,250 Nm, Euro 6e * Transmission feature: EfficientRoll * Cruise control * Differential lock on rear axle * MEILLER axial pump 270/45 * Tip control for tipper body in cab * MAN EasyControl panel, 4 functions, operable from outside when door open * RINGFEDER trailer coupling type 4040/G150B * Brake connection (2-line) at end of frame * Sun visor in front of windshield * Central locking with remote control * MAN Media System Navigation Advanced 7 inch * Online traffic for navigation * Smartphone integration * Heated and electrically adjustable rear-view and wide-angle mirrors * Driver comfort seat: air-suspended, with lumbar support, shoulder adjustment and heating * Height-adjustable seat belt anchorage for driver’s seat * 2 work lights on cab roof * 2 halogen roof beacons on cab roof * and much more Financing, leasing, or hire purchase available. For further questions, our sales team is happy to assist you. This is a non-binding offer. Subject to prior sale, errors and modifications. This is a non-binding offer. Subject to prior sale, errors and changes.

Stanje: novo, Diameter -- mm Workpiece width -- mm Workpiece length -- mm Chamfering System UZ30 EXPRESS Maximum chamfer width 30 mm with automatic feed Stationary UZ30 EXPRESS is one of the best solutions for chamfering large and small batches, as well as small parts or long and narrow flat bars. The UZ30 EXPRESS can be used not only for chamfering, but also for deburring. Thanks to the unique geometry of the milling cutter, the feed rate can be adjusted to up to 3.5 m/min. For longer workpieces, it is possible to equip the machine with an additional infeed and outfeed table, increasing the working area to an impressive 2,824 mm. - Designed for chamfering steel, aluminum, copper and other materials, flat bars, pipes, and welding bevels - Chamfering performed by high-quality milling (mirror finish) - Feed control via rotary knob - Cutter speed controlled via frequency inverter - Further optional accessories available for pipe chamfering - Option to extend the work table to a total of 2,824 mm - Fast and precise machine adjustment via gauge Gjder I E Exspfx Ah Dsuh Technical Data: Approximate values of maximum chamfer width: at 30° – 30 mm, at 45° – 20 mm, at 60° – 17 mm Adjustable chamfer angle: 30° – 60° (constant) Application range – sheet thickness: 3 – 100 mm Pipe chamfering: OD 102 mm – OD 156 mm Milling motor power: 4,000 W Milling head speed: Adjustable via rotary knob (frequency converter) Feed rate: 0.6 – 3.5 m/min Weight: 400 kg Dimensions: 825 x 1200 x 1615 mm Number of indexable inserts: 5 pieces

Stanje: novo, moč: 375 kW (509,86 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, emisijski razred: Euro 6, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 6.600 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Internal reference number for customer inquiries: 22-22/IMMEDIATELY AVAILABLE ----MAN TGX 26.520 flatbed for construction materials with FASSI F235 loader crane IMMEDIATELY AVAILABLE! Loader Crane: FASSI F235A.2.24 e-dynamic * Control unit for 2 additional functions with 2 hose guides * Lifting moment 189.0 kNm (20.9 mt) * Lifting capacity: 1,345 kg at 12.7 m outreach Gedpfx Ajxnn Tlsh Deuh * All hydraulic cylinders are double-acting * Double linkage system with PROLINK (articulated arm can extend up to 15° beyond the vertical) * Electronic overload cut-off with FX500 * FASSI stability control FSC incl. LMB II * Radio remote control RCS * LED work lights operable via RCS/display * FL-System (Full Lift) selectable fast-extraction valve for crane extensions Body: * Flatbed dimensions: 6,600 x 2,480 x 1,000 mm * Side panels divided once per side (2 flaps) with side panel relief * Subframe: galvanised steel grid frame * Perforated frame for optimal load securing * Toolbox Vehicle: * Flatbed with crane * MAN D2676 LFAF diesel engine, 520 HP, 2,600 Nm torque, Euro 6e * MAN TipMatic 12.26 DD automatic transmission with retarder 35 * Eco retarder, speed-dependent, multi-stage, energy-efficient * High-performance engine brake MAN EVBec, multi-stage * Disc brakes, protected, suitable for off-road use * Drive: 6x2-4 * Suspension: leaf/air (BL) * Main wheelbase: 4,800 mm, wheelbase between rear and trailing axle: 1,350 mm * Fuel tank capacity: 590 L, AdBlue tank capacity: 60 L * Trailing axle, steerable and liftable * RINGFEDER trailer coupling type 4040/G150B, 40 mm towing eye * GM cab: spacious (wide, long, medium height) * Comfort mattress, lower bunk, 110 mm * Pull-out refrigerator and drawer * Driver comfort seat, air-suspended, with lumbar support and shoulder adjustment * Electric glass sunroof * LED lighting * MAN EasyControl panel with 4 functions, operable from outside when door is open * MAN Media System Navigation Professional 12.3 inch * MAN Advanced sound system with subwoofer * Smartphone integration * MAN SmartSelect infotainment control with touchpad and direct-select keys * Lane departure warning LDW * Driver attention assist MAN AttentionGuard * Emergency brake assist EBA * Standard driveline warranty extension for third year of operation up to 450,000 km (see maintenance log for conditions) * and much more. Financing / hire purchase as well as leasing / partial amortization leasing are available through our leasing partner. Our sales team will be happy to assist with further questions. This is a non-binding offer. Subject to prior sale, errors and changes.

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 15 mm Angle range 15-50° Sheet thickness 6-40 mm Total connected load 1.5 kW Feed speed 3.5 m/min Dimensions 530 x 395 x 860 mm Machine weight approx. 94 kg The UZ15 RAPID machine is one of the fastest bevelling machines with automatic feed on the market. It is suitable not only for workshops, but also for on-site assembly jobs. It features an infinitely variable bevel angle adjustment system. Additionally, the machine is equipped with an automatic feed, making operation with the UZ15 Rapid very convenient. - Suitable for conventional steel (up to a strength of 600 MPA/87,022 PSI), brass, copper, and aluminium materials Gusdpfxok Uqhao Ah Deh - For bevelling workpieces with minimum dimensions of 70 x 150 x 6 mm - Operating range for sheet thickness 6–40 mm - The bevel angle can be easily adjusted steplessly from 15° to 50° without changing any parts - Double-sided bevel (X, K) without material handling - Simple connection to the 3D manipulator for easier operation and handling - Silent operation - Equipped with automatic feed - For stationary or mobile use - The machine can work with large workpieces without any support at a speed of 3.5 m/min - Smaller workpieces can be inserted directly into the machine - Discounted price when purchasing the UZ15 RAPID together with the 3D manipulator

Stanje: novo, moč: 350 kW (475,87 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: črn, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 6.500 mm, višina nakladalnega prostora: 600 mm, skupna širina: 2.500 mm, Oprema: ABS, dvižna zadnja plošča, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Internal reference for inquiries: 1224/Reference vehicle---- MERCEDES-BENZ ACTROS 2548 L CONTAINER FLATBED WITH FASSI F545RA.2.28 xe-dynamic HEAVY-DUTY CRANE Loader Crane: * FASSI F545RA.2.28 xe-dynamic – at 20.8 m this crane still lifts 1,650 kg (optionally extendable with 2 manual extensions to 24.9 m and 700 kg) * Continuous slewing range Gsdsxnn R Djpfx Ah Deuh * Double linkage system with PROLINK (overbending articulated arm up to 15 degrees) * FASSI stability control * Radio remote control with linear levers and load radius display * XF system (Extra Fast) * XP system (Extra Power) * FL system (Full Lift) * Outriggers radio-controlled * LED work lights * Preparation for winch (winch model Fassi V30 can be retrofitted at any time) * And much more Vehicle: * Flatbed load length 6,500 mm, load width 2,480 mm * Outer frame profile made of steel with lashing points approx. every 250 mm * Drop-side surround with Alu-SL profile * 4x container locks as retractable LAXO model with locking pins, galvanized, extendable for 3 m containers * Extendable oversize marker with clearance lights * Toolbox 1,200x600x600 mm * Chain box 800x600x300 mm * L CAB STREAMSPACE, 2.50 M, FLAT FLOOR * Engine OM471, R6, 12.8 L, 350 kW (476 hp), 2,300 Nm * High performance engine brake * Secondary water retarder * Gearbox G 281-12/14.93-1.0, Mercedes PowerShift 3 * Trailing axle, 8 t, steered, unloadable, liftable * Air/air suspension * 6x2 drive * Fuel tank 630 L, AdBlue tank 60 L * Central axle trailer coupling, D50, Ringfeder * Driver comfort suspension seat * Comfort lower bunk * Refrigerator * Leather steering wheel * Electric one-piece sun blind, windscreen * Multimedia cockpit, interactive * Digital radio * Navigation system * LED daytime running lights * Predictive Powertrain Control * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Cruise control * Hill-start assist, speed limiter 30 km/h * Warranty according to ATS terms, 3 years/450,000 km * And much more Financing / hire purchase, as well as leasing / partial amortization leasing, is possible with our leasing partner. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes.

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 3 mm Spindle speed 3600 rpm Angle range 30 - 60° (stepless) Machine weight approx. 31 kg Space requirement approx. 530 x 420 x 410 mm Gedpfx Ahsppgcre Dsuh Maximum chamfer width of 3 mm - Mechanically adjustable chamfer angle Designed for deburring and chamfering steel parts and workpieces. Suitable for processing various materials. Robust and stable machine construction. * Scale for setting machining depth * Safety cover * Adjustable machining angle * For steel, stainless steel, aluminium and other materials * Precise, heavy-duty and extra-long mechanical guide - Number of indexable inserts: 5 pieces (four-edged) - Feed: manual

Stanje: novo, moč: 412 kW (560,16 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 6.600 mm, višina nakladalnega prostora: 1.000 mm, skupna širina: 2.550 mm, skupna višina: 3.600 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Internal reference number for customer inquiries: 3-488 ---- SCANIA R 560 construction materials vehicle with loading crane Loading crane: * FASSI F255RA.2.24 xe-dynamic (continuous slewing) * Max. lifting moment: 196 kNm * Max. outreach: 12.4 m with 1,415 kg lifting capacity * Continuous slewing range * Double-acting hydraulic cylinders * FL-System (Full Lift) - activatable high-speed valve for extensions * Control system for 2 additional functions with 2 hose guides, e-active * Double knee lever system with PROLINK (over-bending articulated arm up to 15°) * Electronic overload protection system with FX500 * 6-function RCH or RCS radio remote control (linear levers) with display, ADC and XP system * FASSI stability control FSC incl. LMB II * Danfoss D850 control block * Special control valves for functions: slewing, lifting, articulating * Reach 6.64 m hydraulically extendable incl. FSC * Fassi RCS remote control maxi – 6 functions with 3 joysticks (2-2-2) * Work lights operable via RCS/display Gujdpfxoxnnvao Ah Dsh Superstructure: PAVIC * Flatbed: dimensions 6,600 x 2,480 x 1,000 mm, side boards divided once (2 flaps) per side, with side board relief * Subframe: galvanised lattice frame * 45° outer frame as perforated frame for excellent load securing * Central lashing rail Vehicle description: * Scania R 560 * Engine DC13 166 560 HP SCR Euro 6 E * Transmission GRS905S * Opticruise, automated gear shift system for manual transmission * Retarder Scania R4100D with freewheeling function * Differential lock * Eco-Roll function Predictive cruise control * Suspension leaf/air * Wheelbase 4,750 mm * Drive 6x2-4 * 3rd axle steered and liftable * Tires: front axle 385/65R22.5, rear + non-driven rear axle 315/80R22.5 * Trailer coupling Rockinger 500B66000 50 mm D=200 kN * Cab CR2OH Scania Highline, sleeper cab of R series with high roof * LED headlights * LED daytime running lights/position/marker/outline/license plate * Premium leather driver's seat with seat heating and ventilation * Bed 800x2000 mm with pocket spring mattress * Flattened leather steering wheel * Automatic climate control * Auxiliary heater * Cool box * Premium infotainment system with 7" display * Radio with digital reception (DAB) * Navigation system with European truck-specific maps * Lane change warning system * Predictive cruise control (CCAP) * Emergency braking assistant (AEB) * And much more Financing / hire purchase as well as leasing / partial amortisation leasing is possible with our leasing partner. For further questions, our sales team is happy to assist. This is a non-binding offer. Subject to prior sale, errors and modifications.

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 12 mm Angle range 30/45/22.5/37.5/50 ° Machine weight approx. 30 kg Beveling System UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest beveling machines with automatic feed on the market. Thanks to its compact size and low weight, it is suitable not only for workshops but also for on-site assembly. The machine is equipped with an automatic feed, making operation with the UZ12 ULTRALIGHT very comfortable. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 65 x 60 x 3 mm * Operating range plate thickness: 3 – 35 mm * Beveling pipes from an internal diameter of 95 mm * Variable adjustment of the desired bevel via interchangeable holder kit for each given angle * Double-sided bevel (X, K) without material handling * Quiet operation * Equipped with automatic feed * For stationary or mobile use * The machine processes large workpieces without any support at a speed of 1.8 m/min * Smaller workpieces are placed directly into the machine * Lightweight and compact design, can be handled by a single operator * Thermal motor protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (interchangeable KIT) - Working range plate thickness: 3 – 35 mm - Motor: 400 W - Feed rate: 1.8 m/min - Dimensions: 470 x 294 x 523 mm Godpfxoppgcys Ah Dsuh Optionally, we would be glad to offer you a 3D manipulator (mobile) for this device.

Stanje: novo, moč: 324 kW (440,52 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, vrsta prenosa: samodejen, Leto izdelave: 2024, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, žerjav, Internal reference number for customer inquiries: 1-705 / Under construction (in progress) ---- MAN TGS 26.440 6x2H-4 BL 3-way tipper with FASSI F195A.2.24 E-DYNAMIC loader crane Loader Crane: * FASSI F195A.2.24 e-dynamic * Lifting moment 162 kNm (16.51 mt) * Fourfold hydraulic extension, 12.7 m outreach * E-dynamic hose equipment for 2 additional attachments * Slewing range 400° * Double knuckle boom system with PROLINK (over-extendable articulated arm up to 15°) * Electronic overload cut-off device with FX 500 * FASSI Stability Control FSC including LMB II * FASSI RCS Radio maxi - 6 functions with 3 joysticks (2-2-2) * Special stabilizers, outrigger width 6.64 m, hydraulically extendable incl. FSC * Outriggers operable via remote control * FL-System (Full Lift) switchable high-speed valve for extensions * LED work lights Vehicle: * MAN D2676 LFAJ diesel engine, 324 kW (440 hp) power, 2,200 Nm torque, Euro 6e * Automatic gearbox MAN TipMatic 12.24 OD * 6x2H-4 MAN HydroDrive, hydrostatic drive on front axle * Wheelbase 3,600 + 1,350 mm * Spring suspension: leaf/air * RINGFEDER 40 mm trailer coupling, type 4040/G150A (optionally ø50 mm at additional cost) * 2-line trailer brake connection, DuoMatic coupling * 390 l capacity diesel tank, 60 l AdBlue tank * High performance engine brake MAN Turbo EVBec, adjustable * Differential lock on driven rear axle * Trailing axle, 9,000 kg, non-driven, straight, steerable, liftable * Preparation for 2 cameras, one connected to reverse gear * Cab NN: the practical one (narrow, medium length, standard height) * Driver comfort seat, air-sprung, with lumbar support, shoulder adjustment, and seat heating * Electrically operated sunblind for front windshield, interior * Refrigerator * MAN EasyControl control panel, 4 functions, operable from outside with door open * MAN Media System Navigation Professional 12.3 inch * MAN Soundsystem Advanced Superstructure: 3-way tipping body with FASSI F195A.2.24 E-DYNAMIC crane mounted directly behind the cab (crane with top equipment: radio remote control, hydraulic stabilizers with remote control operation, work lights, etc.) Gusdpoxnnwkofx Ah Dsh Platform body: * Dimensions LxWxH: 4,800 mm x 2,420 mm x 800 mm * (Alternatively also available: load space length 5,200 mm x 2,420 mm x 800 mm) * Front wall 1,000 mm high Subframe: Sturdy steel welded construction, two longitudinal members with cross members to accommodate the 5 mm thick tipper section and 4 mm floor plate made of Hardox or Naxtra. Fixed 1,000 mm high steel front wall. Corner stanchions fixed, with lower fasteners. Tailgate and side walls (one-piece over full length) made from aluminium hollow profiles, side walls foldable and pivoting with sideboard lifting assistance. Tailgate also foldable and pivoting, centrally locked in the tipper section. Floor plate from Hardox or Naxtra, 4 mm thick, welded cleanly to tipper section, longitudinal and cross members. Press traverse and tipping brackets integrated and reinforced in the longitudinal members. Lashing eyes (4 per side) evenly distributed externally in the tipper floor. Steel structure made in St 52-3. All steel parts sandblasted, body components painted or powder-coated in RAL 9016 single colour. Auxiliary frame: Auxiliary frame for mounting the front and rear tipping brackets, with press traverse and crossmembers. In crane mounting area, closed as box profile with side crane mounting plates. Plastic k

Stanje: novo, Designation of model: Chamfering system UZ12 ULTRALIGHT Gujdpfxsk D Nyij Ah Doh

Stanje: novo, moč: 353 kW (479,95 KM), skupna masa: 26.000 kg, vrsta goriva: dizel, barva: bela, konfiguracija osi: 3 osi, zavore: retarder, vrsta prenosa: samodejen, širina tovornega prostora: 2.480 mm, dolžina tovornega prostora: 6.600 mm, višina nakladalnega prostora: 1.000 mm, Oprema: ABS, elektronski program stabilnosti (ESP), filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, žerjav, Internal reference number for customer inquiries: 4-042 !!! IMMEDIATELY AVAILABLE !!! MAN TGS 26.480 BUILDING MATERIAL TRUCK WITH REAR-MOUNTED CRANE (FASSI or PALFINGER) Optionally also in stock with 520 HP! Vehicle: Flatbed with loader crane * MAN diesel engine 02676 LFAI, 480 HP, 2,400 Nm torque, Euro 6e * MAN TipMatic 12.26 DD automatic transmission with retarder 35 * Eco retarder, speed-dependent, multi-stage, energy efficient * MAN EVBec high-performance engine brake, adjustable * Drive 6x2-4 * Suspension type leaf/air (BL) * Main wheelbase 4,800 mm, rear axle to trailing axle distance 1,350 mm * Fuel tank capacity 590L, AdBlue tank 60L * Steerable and liftable trailing axle * RINGFEDER tow hitch type 4040/G150B * NN cab: the practical choice (narrow, medium length, standard height) * Refrigerator * Air-suspended driver's comfort seat with lumbar support and shoulder adjustment * Electric glass sunroof * Electrically operated front sunblind (internal) * LED lighting * MAN EasyControl operating panel with 2 functions, operable from outside with door open Gujdpfx Ahoxnnzis Doh * MAN Media System Navigation Advanced 7" * MAN Advanced sound system * Smartphone integration * MAN SmartSelect infotainment controller with touchpad and direct entry buttons * Lane departure warning LDW * MAN AttentionGuard driver fatigue alert * Emergency braking assist EBA * Standard driveline extended warranty for the 3rd year up to 450,000 km, terms as per maintenance record * and much more. Body: Drop-side flatbed: Dimensions 6600 x 2480 x 1000 mm, sideboards 1x split (2 flaps) per side, with sideboard relief * The base plate is made of high-quality, glued Finnish multi-layer plywood, 30 mm thick, mounted to the outer frame with 45° perforated mounting and cross beams. Edges are sealed against moisture ingress. * Central tie rail embedded in driving direction * 4 work spotlights * Toolbox PK 22002-EH? PALFINGER HIGH-PERFORMANCE TRUCK LOADER CRANE - Lifting moment: 205.0 kNm (20.9 mt) - Classification: HC1 HD4/B3 according to EN12999 - Fast extension system with return oil utilization and internal oil guidance - Dual link-system with Power Link Plus 15° - Slewing system with slewing cylinders - Slewing range 400° - Electronic HPLS control unit (for two pressure ranges) - Individual outrigger control with unlockable check valves at outrigger cylinders - Spiral hose from base frame to main boom - Spirit level at both operating positions - 4x and 6x extension booms available from stock or Fassi F235 Loader Crane: * F235A.2 e-dynamic * Lifting capacity: 1,345 kg at 12.7 m or 740 kg at 17.1 m * Slewing range 400° * Dual link system with PROLINK (over-bending knuckle boom up to 15°) * Electronic overload cut-off with FX500 * Fassi RCS radio remote maxi - 6 functions, 3 joysticks (2-2-2) * Emergency stop and optical warning (at 90% and 100%), digital slewing limitation adjustable * FASSI stability control FSC incl. LMB II * Control system for 2 auxiliary functions with 2 hose guides / e-dynamic * 4x and 6x extension booms available from stock Financing / hire purchase as well as leasing / partial amortization leasing possible in cooperation with our leasing partner. If you have any questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and change.