Anfas nakup rabljenega (63)

Stanje: novo, dolžina tovornega prostora: 5.300 mm, širina tovornega prostora: 2.420 mm, skupna dolžina: 6.500 mm, Leto izdelave: 2026, Nov, tovarniški zabojnik za odlaganje s FASSI žerjavom Zabojnik za odlaganje v konstrukciji s platformo z aluminijastimi stranskimi stranicami in trajno nameščenim Fassi žerjavom ELLERMANN zabojnik za odlaganje po standardu DIN 30722-1 z aluminijastimi stranskimi stranicami in ploščo za žerjav Konstrukcija s platformo, tip K 33 s Notranje dimenzije: približno 6,5/5,3 x 2,42 x 1,0 meter, vse mere so približne Korisna prostornina: približno 13 m³ Barvanje: v barvi RAL po želji ? Pritrdilni elementi za sisteme s kavljem po standardu DIN 30722-1 (15.000 kg) z zunanjimi kolesi na zadnji strani in podokvirjem iz INP 180 Zunanja kolesa so mazljiva in zamenljiva Pritrdilni nosilec, premer 50 mm, višina kavlja 1.570 mm Prehod iz podokvirja na nosilec čelne stene je ojačan s 10 mm ploščo ? Platforma za žerjav, 20 mm debeline na čelni strani, dolžina približno 1.200 mm Ojačitev na nosilcu čelne stene in notranji strani podokvirja Dodatna ojačitev na čelni steni ? Notranja višina čelne stene približno 1.000 mm ? Dno iz 5 mm St 37.2 (S235JR) ? Razdalja med vzdolžniki dna 500 mm Profil vzdolžnika: U 80 x 50 mm ? Zunanji profil v obliki perforirane letve (vsakih 200 mm je luknja, premer 40 mm), nosilnost 500 kg/luknja, največ 5 ton, upravljanje znotraj ? Aluminijaste stranske stranice, višina približno 1,0 meter, odklopne in odstranljive, 1-krat razdeljene na sredini z odstranljivimi prečnimi nosilci ? Aluminijasta zadnja vrata, odklopna in odstranljiva (neprehodna) z odstranljivimi vogalnih nosilci ? Obodna prijemala za ponjavo in mrežo ? Zabojnik je znotraj in zunaj dvakrat grundiran in znotraj in zunaj dvakrat prebarvan v eni barvi ? Aluminijaste stranske stranice niso prebarvane ? UVV nalepke z varnostnimi navodili ? Zabojnik je pregledan in odobren po pravilu DGUV 214-017 (prej BGR 186) ? Knjiga pregledov zabojnika (digitalizirana) za dokumentacijo obveznega letnega pregleda po UVV FASSI žerjav F150A.2 e-dynamic Izvedba v skladu z direktivo CE (EN 12999) Izvajalec mora izvesti pregled, ko je žerjav nameščen v končni poziciji in je pripravljen za uporabo. Osnovna enota: F150A.2 e-dynamic Območje vrtenja: 416° Vsi hidravlični cilindri so dvosmerni Batne palice so trdo kromirane Dvojni sistem ročic s PROLINK (prekomerno podaljšana ročica do 15°) Elektronska varnostna naprava proti preobremenitvi s FX500 6 funkcij, radiotelekomandni sistem RCH ali RCS (linearni ročici) z zaslonom in sistemom XP Izklop v sili, kot tudi optični alarm (90 % in 100 %) vklj. digitalno nastavljiva omejitev vrtenja FASSI sistem za stabilnost FSC, vklj. LMB II Ventili za omejevanje tlaka in zadržavanje bremena, visokotlačna filtracija Danfoss S800 nadzorni blok z 4 upravljalnim ventilom, upravljanje na eni strani Ločen hidravlični rezervoar (90 l) s filtrom, nameščen na podnožju žerjava stransko izvlečna, širina opore 4,60 m, hidravlična opora, CE, vklj. M.O.L. Standardna barva RAL 3020 prometno rdeča - vsi cilindri so prebarvani v črno Kavljica za breme in pritrdilne spone (kratke / 500 mm) Položaj za vožnjo: zložena prečno na smer vožnje Mrtva točka nad opornikom Pozor: Upoštevajte napetost / 12 V ali 24 V, standardno 24 V F150A.2.23 e-dynamic » Osnovna enota IE742 priključna omarica Bedpozq Iu Iefx Am Eelp Razširitev opore na širino 5,4 m Premestitev mrtve točke 1 LED delovna luč na ročici, nameščena LED za 2 opori, ni nameščena (žerjav) Nadzorni sistem za 2 dodatni funkciji z 2 vodili / eactive Vrtenjski ventil, samo za žerjave z zobnikom in kolesom Ventil za hitri izmet Dodatno doplačilo

Stanje: novo, skupna masa: 32.000 kg, konfiguracija osi: 2 osi, dolžina tovornega prostora: 12.300 mm, skupna širina: 2.550 mm, Leto izdelave: 2026, Oprema: ABS, Wiese 2-axle stepframe semi-trailer in telescopic version with Fassi F545RA.2.26 crane Mega lowliner as stepframe semi-trailer. Bodsyihgyopfx Am Eelp Chassis Welded construction with cross members made entirely of high-grade steel Neck construction reinforced for front-mounted crane Axles 2 BPW axles with 10,000 kg capacity each, drum brakes 17.5" ABS: 1 axle with sensor Axle spacing: 1,810 mm Both axles with forced steering Tyres 8x 235/75 R17.5 Wheels Aluminium rims, 10-hole, hub-centric, ET= 122 mm Lighting system 24V lighting system in accordance with EU Directive 76/756/EEC and subsequent amendments, featuring: 2x2 triple-chamber LED tail lights 1x LED reversing light 1x LED fog lamp LED side marker lights Lane marker lights Number plate illumination 2x 7-pin + 1x 15-pin sockets wired to EU standards Floor Phenolic-coated plywood floor Steel chequer plate over axle area Load securing Outer frame with lashing hole profile, D030 mm, angled 2x12 lashing points, 8,000 daN, in the outer frame 3x rows of combi stake pocket sleeves for 80x80 mm posts in the lowbed area Accessories 2x wheel chocks with holders Spare wheel carrier winch 2x toolboxes with sliding drawer (for chain storage) etc. Crane: Fassi F 545 RA.2.26 XE-Dynamic Hydraulic outriggers Additional stabiliser beams 360° working range Approx. 100% outreach to the front The attached images are sample images. We manufacture crane trailers in various configurations. For further information, feel free to contact us. On request, we will provide you with a customized offer based on your required specification.

Stanje: rabljeno, konfiguracija osi: 2 osi, prva registracija: 07/2012, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.450 mm, višina nakladalnega prostora: 1.000 mm, vzmetenje: zrak, velikost pnevmatike: 425/65R22.5, medosna razdalja: 1.850 mm, Oprema: žerjav, Pogonski sklop Pogon: Kolo Konfiguracija osi Vzmetenje: Zračno vzmetenje Zadnja os 1: Dimenzija pnevmatike: 425/65R22.5 Zadnja os 2: Dimenzija pnevmatike: 425/65R22.2; Krmiljena Bljdpfx Aovnt D Tsm Ejp Teže Lastna teža: 11.550 kg Nosilnost: 26.450 kg DGV: 38.000 kg Funkcionalno Dvižni steber: Teleskopski (5-delni) Znamka nadgradnje: FASSI F245 A Kiper: Zadnji izpust

Stanje: rabljeno, Hand trolley, push trolley, crane trolley, trolley carriage, crane travel unit, crane carriage, trolley - Beam width: max. 100 mm Bjdpfjd N Rt Dex Am Ejlp - Load capacity: 2,500 kg - Dimensions: 327/200/H270 mm - Weight: 27 kg

Stanje: novo, Designation of model: Chamfering system UZ12 ULTRALIGHT Blsdok D Nyiepfx Am Esp

Stanje: novo, Model designation Bjdpfx Ask Au Dvem Eslp Chamfering system B22 ZERO

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 18 mm Angle range 15° - 50° Machine weight approx. 110 kg Beveling System UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker is one of the most powerful automatic-feed beveling machines available on the market. It is suitable not only for workshop use but also for on-site assembly. The machine features a stepless adjustable bevel angle system. Thanks to its specially designed drive system, the UZ18 Hardworker is suitable for tougher materials as well. The machine is equipped with automatic feed, making operation with the UZ18 Hardworker highly comfortable. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 70 x 150 x 6 mm * Suitable sheet thickness range: 6 – 40 mm * The bevel angle can be easily and steplessly adjusted from 15° to 50° without the need to replace any parts * Double-sided beveling (X, K geometry) without material handling * Easy connection to a 3D manipulator for simplified operation and handling * Silent operation * Equipped with automatic feed * Suitable for stationary or mobile use * The machine processes large workpieces without additional support at a speed of 1.9 m/min * Smaller workpieces are inserted directly into the machine - Max. bevel width (hypotenuse): 18 mm - Steplessly adjustable angle: 15° - 50° - Sheet thickness range: 6 – 40 mm - Motor: 750 W - Feed speed: 1.9 m/min - Weight: 110 kg - Dimensions: 438 x 719 x 644 mm We are happy to offer you an optional mobile 3D manipulator for this unit upon request. Bljdpfx Aok Egrtjm Eep

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 12 mm Angle range 30/45/22.5/37.5/50 ° Machine weight approx. 30 kg Beveling System UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest beveling machines with automatic feed on the market. Thanks to its compact size and low weight, it is suitable not only for workshops but also for on-site assembly. The machine is equipped with an automatic feed, making operation with the UZ12 ULTRALIGHT very comfortable. * For conventional steel (up to a strength of 600 MPa/87,022 PSI), brass, copper, and aluminum materials * For beveling workpieces with minimum dimensions of 65 x 60 x 3 mm * Operating range plate thickness: 3 – 35 mm * Beveling pipes from an internal diameter of 95 mm * Variable adjustment of the desired bevel via interchangeable holder kit for each given angle * Double-sided bevel (X, K) without material handling * Quiet operation Bsdpfxeppgcyj Am Eolp * Equipped with automatic feed * For stationary or mobile use * The machine processes large workpieces without any support at a speed of 1.8 m/min * Smaller workpieces are placed directly into the machine * Lightweight and compact design, can be handled by a single operator * Thermal motor protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (interchangeable KIT) - Working range plate thickness: 3 – 35 mm - Motor: 400 W - Feed rate: 1.8 m/min - Dimensions: 470 x 294 x 523 mm Optionally, we would be glad to offer you a 3D manipulator (mobile) for this device.

Stanje: novo, Model designation Bodjk Au Dropfx Am Eslp B3 deburring/beveling machine

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 15 mm Angle range 15-50° Sheet thickness 6-40 mm Total connected load 1.5 kW Feed speed 3.5 m/min Dimensions 530 x 395 x 860 mm Machine weight approx. 94 kg The UZ15 RAPID machine is one of the fastest bevelling machines with automatic feed on the market. It is suitable not only for workshops, but also for on-site assembly jobs. It features an infinitely variable bevel angle adjustment system. Additionally, the machine is equipped with an automatic feed, making operation with the UZ15 Rapid very convenient. - Suitable for conventional steel (up to a strength of 600 MPA/87,022 PSI), brass, copper, and aluminium materials - For bevelling workpieces with minimum dimensions of 70 x 150 x 6 mm - Operating range for sheet thickness 6–40 mm Blodpok Uqhasfx Am Eop - The bevel angle can be easily adjusted steplessly from 15° to 50° without changing any parts - Double-sided bevel (X, K) without material handling - Simple connection to the 3D manipulator for easier operation and handling - Silent operation - Equipped with automatic feed - For stationary or mobile use - The machine can work with large workpieces without any support at a speed of 3.5 m/min - Smaller workpieces can be inserted directly into the machine - Discounted price when purchasing the UZ15 RAPID together with the 3D manipulator

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 20 mm Rotational speed 2850 rpm Angle range 0 - 60° (stepless) Machine weight approx. 19.5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for so-called FACING – the removal of an unwanted material layer on the end face of the workpiece, such as occurs during flame cutting of sheet metal. Specifically developed for producing visible bevels and weld seam preparations. Powerful electric drive for extreme loads. * High-performance motor * Stepless adjustment of the working angle in the range of 0° - 60° * FACING – edge processing at 0° angle for removing unwanted material layers after flame cutting * Unique mechanical scale for setting chamfer width for greater precision * Very compact and ergonomic design for high working productivity * Surrounding protective frame to prevent damage and provide versatile grip options * With suitable accessories, pipes from D=150 mm can also be machined * Additional adjustable handle Bedjppgcvjpfx Am Eelp - Chamfer width (hypotenuse): 0 - 20 mm = 400 MPa / 0 - 16 mm = 400 MPa - Motor: 1100 W We are also pleased to offer you an optional pipe beveling attachment (D=150mm) for this device.

Stanje: novo, Diameter -- mm Workpiece length -- mm Workpiece width 0 - 3 mm Spindle speed 3600 rpm Angle range 30 - 60° (stepless) Bljdpfxsppgcrs Am Eop Machine weight approx. 31 kg Space requirement approx. 530 x 420 x 410 mm Maximum chamfer width of 3 mm - Mechanically adjustable chamfer angle Designed for deburring and chamfering steel parts and workpieces. Suitable for processing various materials. Robust and stable machine construction. * Scale for setting machining depth * Safety cover * Adjustable machining angle * For steel, stainless steel, aluminium and other materials * Precise, heavy-duty and extra-long mechanical guide - Number of indexable inserts: 5 pieces (four-edged) - Feed: manual

Stanje: novo, Diameter -- mm Workpiece width -- mm Workpiece length -- mm Chamfering System UZ30 EXPRESS Maximum chamfer width 30 mm with automatic feed Bodpfx Asr I E Exom Eslp Stationary UZ30 EXPRESS is one of the best solutions for chamfering large and small batches, as well as small parts or long and narrow flat bars. The UZ30 EXPRESS can be used not only for chamfering, but also for deburring. Thanks to the unique geometry of the milling cutter, the feed rate can be adjusted to up to 3.5 m/min. For longer workpieces, it is possible to equip the machine with an additional infeed and outfeed table, increasing the working area to an impressive 2,824 mm. - Designed for chamfering steel, aluminum, copper and other materials, flat bars, pipes, and welding bevels - Chamfering performed by high-quality milling (mirror finish) - Feed control via rotary knob - Cutter speed controlled via frequency inverter - Further optional accessories available for pipe chamfering - Option to extend the work table to a total of 2,824 mm - Fast and precise machine adjustment via gauge Technical Data: Approximate values of maximum chamfer width: at 30° – 30 mm, at 45° – 20 mm, at 60° – 17 mm Adjustable chamfer angle: 30° – 60° (constant) Application range – sheet thickness: 3 – 100 mm Pipe chamfering: OD 102 mm – OD 156 mm Milling motor power: 4,000 W Milling head speed: Adjustable via rotary knob (frequency converter) Feed rate: 0.6 – 3.5 m/min Weight: 400 kg Dimensions: 825 x 1200 x 1615 mm Number of indexable inserts: 5 pieces