Hladna krožna žaga

KALTENBACH KKS 400 H

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1980, Na prodaj je Kaltenbach hladna krožna žaga – na zalogi različne izvedbe in modeli. Stroj je bil tehnično in vizualno temeljito obnovljen. Menjalnik seveda brez zračnosti! Tip: KKS 400 H Premer žaginega lista: 400 mm Moč motorja: 1,8/2,7 kW Hitrost rezanja: 10/20 13/26 15/30 m/min Pomik: 0–1.000 mm/min Hitro premikanje naprej/nazaj: 1.550 mm/min Hjdpfx Aoyy Nfvofweff Maks. delovno območje: 130 mm Delovno območje za kvadratni material: 120 mm Delovno območje za ploščati material: 305 x 20 mm Delovno območje za okrogli material: 130 mm Min. delovno območje: 10 x 10 mm Območje kotnega rezanja: 0°–90°–0° Dimenzije (D x Š x V): 1.080 x 900 x 1.760 mm Teža: 850 kg Ogled/prevzem v 89558 Böhmenkirch Pošiljanje možno po dogovoru Na voljo viličar za nakladanje.

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. Hsdpfxshzbips Afweff - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1980, Naprodaj je Kaltenbach hladna krožna žaga Stroj je bil tehnično in vizualno temeljito obnovljen Menjalnik seveda brez zračnosti! Tip: KKS 400 H Premer žaginega lista: 400 mm Moč motorja: 1,8/2,7 kW Hitrost rezanja: 10/20 13/26 15/30 m/min Pomik: 0 - 1.000 mm/min Hitri pomik naprej/nazaj: 1.550 mm/min Največji delovni obseg: 130 mm Delovni obseg za kvadratni material: 120 mm Delovni obseg za ploščati material: 305 x 20 mm Delovni obseg za okrogli material: 130 mm Minimalni delovni obseg: 10 x 10 mm Območje zamika: 0° - 90° - 0° Dimenzije D x Š x V: 1.080 x 900 x 1.760 mm Teža: 850 kg Hfsdpfx Aeyy Nfpofwef Ogled / prevzem v 89558 Böhmenkirch Pošiljanje možno po dogovoru Viličar za nakladanje je na voljo.

Leto izdelave: 1987, stanje: dober (rabljeno), številka stroja/vozila: 108922, Saw blade diameter: 400 mm Cutting capacity at 90° round: 130 mm Cutting capacity at 90° rectangular: 305 x 40 mm Mitre cutting capacity at 45° round: 130 mm Hfedohz T Hfopfx Afwjf Mitre cutting capacity at 45° rectangular: 245 x 40 mm Cutting speed: 10 m/min Drive motor: 380 V, 1.7 kW Space requirement: 1100 x 1000 x 1900 mm Weight: 700 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, različni elektromotorji na zalogi različni priznani nemški proizvajalci od 1 do 160 kW vsi elektromotorji so preverjeni glede delovanja Hfsdpfox Nh S Tjx Afwjf

Stanje: skoraj kot novo (rabljeno), Na prodaj žaga Kaltenbach! Idealna za kovinska dela na prostem. Ta robustna naprava je takoj pripravljena za uporabo in je popolna za natančne reze. Ima rahle sledi uporabe, vendar deluje brezhibno. Izkoristite to priložnost za nadgradnjo svoje delavnice! Ogled možen po dogovoru. Priporočljivo za vsakega obrtnika! Hedoyuxuhepfx Afwoff

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1980, Na prodaj je Kaltenbach hladna krožna žaga – na zalogi različne izvedbe in modeli. Stroj je bil tehnično in vizualno temeljito obnovljen. Menjalnik seveda brez zračnosti! Tip: KKS 400 H Premer žaginega lista: 400 mm Moč motorja: 1,8/2,7 kW Hitrost rezanja: 10/20 13/26 15/30 m/min Pomik: 0–1.000 mm/min Hitro premikanje naprej/nazaj: 1.550 mm/min Maks. delovno območje: 130 mm Delovno območje za kvadratni material: 120 mm Hedpfx Afoyigtlewsff Delovno območje za ploščati material: 305 x 20 mm Delovno območje za okrogli material: 130 mm Min. delovno območje: 10 x 10 mm Območje kotnega rezanja: 0°–90°–0° Dimenzije (D x Š x V): 1.080 x 900 x 1.760 mm Teža: 850 kg Ogled/prevzem v 89558 Böhmenkirch Pošiljanje možno po dogovoru Na voljo viličar za nakladanje.

Stanje: dober (rabljeno), x-travel 410 mm y-travel 310 mm z-travel 400 mm Main spindle taper SK 40 Table clamping surface 700 x 280 mm Speed range 45 - 2000 rpm Quill stroke 63 mm Total power requirement 2.2 kW Machine weight approx. 1300 kg Space requirement approx. 2.1 x 2.1 x 1.7 m Voltage 400 V 3-axis digital readout Heidenhain Hodpei Elydofx Afweff Fixed angle table Coolant system Swivelling vertical milling head

Stanje: rabljeno, Leto izdelave: 1983, Saw blade diameter: 400 mm Cutting diameter: 130 mm Stroke: 150 mm Cutting range, square: 120 x 120 mm Cutting range, flat: 300 x 40 mm Cutting capacity at 45°: round 130 mm Cutting capacity at 45°: square 110 x 110 mm Cutting capacity at 45°: flat 245 x 40 mm Mitre cuts: both sides, 90° Cutting speed: 13 / 25 m/min Control: minipos 807 Hedpfxotqqrze Afwjff Total power requirement: 4.3 kW Machine weight approx. 850 kg Machine dimensions (L x W x H): 1.20 x 1.20 x 1.82 m Accessories: infeed and outfeed roller conveyors, each approx. 4,000 mm long, NC stop, coolant system

Stanje: novo, Leto izdelave: 2026, Spindle speed continuously variable, electronically controlled: 40–4000 rpm Spindle mount: MT 2 Table height adjustment via rack and pinion Maximum thread cutting capacity: M10 Thread cutting depth setting via digital depth display Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed/operation: manual Table height adjustment via rack and pinion Continuous/normal drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Throat: 225 mm Column diameter: 60 mm Usable table surface (W x L): 330 x 250 mm Machine dimensions (W x D x H): 420 x 450 x 860 mm Machine dimensions (with base) (W x D x H): 452 x 700 x 1130 mm Weight: 62 kg Max. distance spindle/table/base: 300 / 360 mm Motor: single-phase AC with frequency inverter, 230 V, 0.54 kW OPTION: Drilling package no. 2: Hfodpfsby Swhox Afwsf - Vice "Felix", jaw width 80 mm, max clamping width 120 mm - Quick-release drill chuck 1–13 mm, mount B16 - Taper arbor MT II/B16 - Reducing sleeve MT II/MT I Price: €320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT PARTNER AND CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! ASK US FOR AN INDIVIDUAL QUOTATION!