Tračna žaga

BERG & SCHMID GBS 255 VA-I CNC

Stanje: novo, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw band length: 2,765 x 27 x 0.9 mm Table height: 870 mm Nwsdpjd Iipzsfx Anzek Band speed: 18 - 110 m/min Control system: CNC Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.63 t Space required: approx. 1.8 x 1.85 x 1.85 m Mitre band saw, fully automatic GBS 255 Super VA-I CNC • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cutting start detection) • Frame and gearbox made from a single casting, very quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High-performance positioning with incremental encoder (CNC) • Excellent accessibility to saw, material, and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic cutting! • Optimize workflows through CNC control Input options for various parameters such as quantity and material length, automatic offset calculation for the cutting channel • CNC control for 10 different sawing programs with 99 sub-programs each for different lengths and quantities (e.g. 1 sawing program with various section lengths) • Automatic feeding unit (CNC) via ball screw with incremental feed and automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, remnants length 170 mm.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2011, Rabljena avtomatska hidravlična tračna žaga za kovino MEP SHARK 332 NC EVO Dimenzije lista: 3320x27x0,9mm Kot reza: od 45° do +60° Njdpfxjul Svls Anzswk Načini delovanja: ročni, polavtomatski-dinamični, polavtomatski, avtomatski Rezalna hitrost: 15-100m/min (inverter) Kapaciteta reza: pri 0° - okroglo 300mm - kvadrat 260mm - pravokotnik 330x260mm Dimenzije: 2600x2320x2000mm Leto izdelave: 2011 Teža: 1050kg Stroj je v celoti obnovljen in testiran.

Stanje: novo, Cutting capacity at 90°: round 305 mm Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cut! Njdpfx Aeupw R Aonzowk • Optimize workflow with CNC control Parameters such as quantity and material lengths can be entered, with automatic kerf compensation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with various section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm. Included: - Micro-spray unit - Leveling elements

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Kasto Functional A vodoravna tračna žaga Leto: 2010 Tehnične podrobnosti: Največji premer rezanja: 260 mm dolžina tračnega lista: 3830 x 29 x 0,9 mm hitrost rezanja: 19-100 m/min skupna priključna moč: 2,2 kW teža stroja cca 860 kg dimenzije stroja cca 1550 x 1700 x 1480 mm odprtina primeža: 300 mm kotno rezanje levo/desno: 45°/60° Kasto Compact Control - barvni zaslon na dotik Frekvenčno krmiljen pogon žage Neomejeno nastavljiv pomik reza Hidravlični vpenjalni primež Podajalnik materiala Nwodey Urz Nopfx Anzsk Sistem za hlajenje Nadzor hitrosti vključno z valjčnim transporterjem, žaginimi listi, dokumentacijo

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), skupna masa: 1.800 kg, skupna višina: 2.160 mm, This BOMAR Individual 520.360 GANC was manufactured in 2019. It features automatic operation with a mitre cutting range from 0° to 60°. The saw blade operates at speeds between 20 - 120 m/min and can accommodate a maximum material weight of 2,500 kg. Ideal for those looking to enhance their metalworking capabilities. Contact us for more information about this machine. Additional Information: • Operating Mode: Automatic • Mitre Cutting Range: 0° - 60° • Drive: 3 kW, 3x400V, 50 Hz Nedpfxsx D Iwpj Anzewk • Saw Blade Size: 4780 x 34 x 1.1 mm • Material Feed Height: 770 mm • Shortest Support Length: 220 mm • One Lift Stroke: 750 mm • Maximum Material Weight: 2500 kg • Saw Blade Speed: 20 - 120 m/min • Currently disconnected, not operational at this moment, but was fully functional prior to plant relocation. • The seller can dismantle and load the machine for transport. • Not the company's main bandsaw due to its bulky size relative to the processed material. Dimensions: Machine Depth: 3350 mm

Stanje: dober (rabljeno), Leto izdelave: 2003, Dolžina tračnega lista 2910 x 27 x 0,90 mm Krmiljenje Kasto CompactControl Obseg rezanja pri 90°: okroglo 260 mm Nsdpfx Aozgxf Nsnzswk Obseg rezanja pri 90°: ploščato 300 x 260 mm Obseg rezanja pri 90°: kvadratno 260 x 260 mm Obseg rezanja pri 45°: okroglo 200 mm Obseg rezanja pri 60°: okroglo 165 mm Hitrost rezanja 20–110 m/min Najmanjši premer 10 mm Minimalna dolžina reza 6 mm Skupna priključna moč 2,5 kW Teža stroja pribl. 0,86 t Potrebni prostor pribl. 1,8 x 1,8 x 1,7 m Popolnoma avtomatska tračna žaga (CNC) Vključno z desno valjčno progo s programiranim omejevalnim vozičkom in digitalnim prikazom: Pozicioniranje omejevalnika poteka preko integriranega merilnega sistema in se milimetrsko natančno prikazuje na ločenem prikazovalniku. Dimenzije DŠV: 2,70 x 1,10 x 1,70 m. Največja merilna dolžina 2,30 m. Vključno s hidravličnim vpenjalnim in podajalnim blokom Vključno s sistemom za dovajanje hladilne tekočine Vključno z delovno lučjo Vključno z drobnim materialom in rezervnimi deli Vključno z 2 kosoma tračnih žaginih listov Vključno z navodili za uporabo

Leto izdelave: 2013, stanje: rabljeno, Gravimetric Mixers (GRAVIX Series) Nsdpfoy Uw Ubox Anzewk These are robust multi-component systems. The photos show the characteristic hoppers for the various components, which the system weighs with utmost precision. The Moretto DGM Gravix 120 dosing system belongs to the mid-range category of gravimetric dosing machines, characterized by top accuracy and resistance to industrial vibrations. Key Technical Parameters This model is designed for precise mixing of multiple components directly at the machine throat. • Maximum throughput: Up to 120 kg/h (depending on bulk density of the material). • Accuracy: Up to ±0.001% thanks to technology weighing each component 100 times per second. • Number of components: Standard configuration for 2 to 4 materials (expandable depending on version). • Response speed: The patented “Double Eyelid” system opens and closes in 25 ms. • Weigh hopper volume: Optimized for medium batch sizes, freely suspended with no mechanical interference. _____ Key Technologies • VIS (Vibration Immunity System): Enables direct installation on injection molding or blow molding machines without loss of accuracy due to machine movement. • Rotopulse: Special device for micro-dosing additives (from 0.08 g), preventing the formation of material bridges. • Double-Effect Mixer: The semi-spherical mixing chamber ensures perfectly homogeneous mixing without “dead zones.” • MOWIS Ready: Full connectivity for remote control, data export via USB, Ethernet, or Modbus.

Stanje: rabljeno, Dvovretenčna obdelovalna naprava Haas DS-30Y z le 742 urami delovanja vretena – os Y, polna os C in orodje, ki se vrti s 6.000 vrtljaji na minuto, za popolno obdelavo v enem postopku. Tovarniško opremljena z nastavljevalnikom orodja ATP, transporterjem za odvoz čipov LCC3 in avtomatskim sistemom za čiščenje z zračnim curkom na pomožnem vretenu. Haas DS-30Y – leto proizvodnje 2023 CNC NADZOR Krmilnik: Haas Next Generation Control (NGC) Gib osi X (mm): 239 Gib osi Z (mm): 826 Gib osi Y (mm): ± 51 Maksimalna dolžina obdelovanca (mm): 826 Maksimalni premer obdelovanca (mm): ø 349 Maksimalni premer nad posteljo (mm): ø 533 Premer vretena / kapaciteta palice (mm): ø 88,9 / 76 Hitrost hitrega premika (m/min): X/Y: 12 / Z: 24 Nodpszv T Nnofx Anzowk Število položajev za orodje na glavi: 12 Vrsta nosilca orodja (VDI / BMT / drugo): BMT65 Maksimalna hitrost vretena pri pogonjenih orodjih (vrt/min): 6.000 GLAVNO VRETENO Maksimalna hitrost vretena (vrt/min): 4.500 PROTI- / POMOŽNO VRETENO Maksimalna hitrost proti-vretena (vrt/min): 4.000

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, potovalna razdalja osi X: 550 mm, pomik osi Y: 320 mm, pomik po osi Z: 360 mm, obremenitev mize: 500 kg, največja hitrost vretena: 12.000 obr/min, teža orodja: 5.000 g, število osi: 3, Ta 3-osno vertikalno obdelovalno središče CHIRON FZ 12 KW je bilo izdelano leta 2012. Opremljeno je z visoko hitrostjo vretena, ki dosega največ 12.000 vrtljajev na minuto, ter z hitrostjo hitrega premikanja do 60 m/min v osi Z. Stroj ima avtomatski menjalnik orodij s 24 mesti in lahko obremeni mizo do 500 kg. Idealno za natančne obdelovalne naloge. Za več informacij o tem stroju nas kontaktirajte. Dve enoti Chiron v kombinaciji z dvema robotoma Fanuc M - 20iA (2011). Prednosti stroja Tehnične prednosti stroja Nedpfezvyaaox Anzjwk • Nadzorovane osi: 6 osi • Doseg: 704 mm • Pospešek/zaviranje: od 0 do 12.000 vrt/min v 0,6 sekunde • Površina za pritrditev: 820 x 440 mm² • Zmogljivost vrtanja v jeklu St 60: Ø 16 mm • Rezanje navojev: M 16 • Zmogljivost frezanja v jeklu St. 60: 80 cm³/min • Pospešek: osi X in Y 0,7 g, os Z 1,0 g Dodatne informacije Os gibanja, obseg gibanja in hitrost: J1: 340°/360° (opcija) pri 350°/s, J2: 200° pri 350°/s, J3: 388° pri 400°/s, J4: 380° pri 450°/s, J5: 240° pri 450°/s, J6: 720° pri 720°/s. Dovoljeni navor obremenitve: J4 & J5: 11,9 Nm, J6: 6,7 Nm. Ponovljivost: +/- 0,02 mm. Največja hitrost: J1: 195°/s, J2: 175°/s, J3: 180°/s, J4 & J5: 400°/s, J6: 600°/s. Dovoljeni navor obremenitve: J4 & J5: 7,7 Nm, J6: 9,8 Nm. Orodja: Avtomatski menjalnik orodij: Število mest za orodja: 24. Čas menjave orodja: približno 0,9 s. Čas med menjavami orodij: približno 2,4 s. Delovci se dovajajo v obdelovalno središče s pomočjo avtomatskega sistema za dovajanje in jih zaporedno v obdelovalna središča Chiron nalagata dva industrijska robota Fanuc. Odvisno od procesa se delovci nato ali samodejno zložijo na palete ali se nadalje obdelujejo v naslednjem koraku, na primer s spajanjem. Celoten sistem deluje v celoti avtomatizirano.