Moretto DGM 120 (2013)

Moretto DGM 120

Leto izdelave: 2015, stanje: rabljeno, Moretto DGM 120 S (2015) Gravimetric Mixer (GRAVIX Series) These are robust multi-component systems. The photos show the characteristic hoppers for the various components, which the system weighs with maximum precision. The Moretto DGM Gravix 120 S dosing system belongs to the medium category of gravimetric dosing machines, characterized by the highest levels of precision and resistance to industrial vibrations. -Electrical Data: 230 V; 50/60 Hz; 1 kW -Weight: 9.35 kg Rcsdpfxey Udkcs Anpoh Important Technical Parameters This model is designed for the precise mixing of multiple components directly at the machine inlet. • Maximum throughput: Up to 120 kg/h (depending on the bulk density of the material). • Accuracy: Up to ±0.001% thanks to a technology that weighs each component 100 times per second. • Number of components: Standard configuration for 2 to 4 materials (expandable depending on the version). • Response speed: The patented "Double Eyelid" system opens and closes in 25 ms. • Weighing hopper volume: Optimized for medium batch sizes with a fully suspended design free from mechanical interference. _____ Key Technologies • VIS (Vibration Immunity System): Enables direct installation on injection molding or blow molding machines without accuracy loss due to machine movements. • Rotopulse: Special device for micro-dosing additives (from 0.08 g), prevents the formation of material domes. • Double-Effect Mixer: The hemispherical mixing chamber ensures a perfectly homogeneous mixture without "dead zones." • MOWIS Ready: Full connectivity for remote management, data export via USB, Ethernet or Modbus.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Oprema: Na voljo je tipska ploščica, Volumetric dosing systems – granules, powders, and regrind We offer a selection of fully functional volumetric dosing systems, ideally suited for the metering and conveying of granules, powders, and regrind materials. • Various models available: We stock a range of dosing systems that can be adapted to your material and application requirements. • Testing available: Upon request, we will test the dosing equipment with your material to ensure it meets your specifications. Rcodpsvmylzofx Anpeh • Reliable operation: All units have been tested and are ready for immediate use. Contact us, and we will help you find the right dosing system for your needs. Our team is happy to answer your questions or provide advice!

Stanje: rabljeno, Rabljen dozirni sistem za suhe materiale Coperion K-Tron, tip K-ML-FB-130QC, je visoko natančen gravimetrični dozirni sistem (diferencialna dozirna tekoča tehtnica) iz nerjavečega jekla. Sistem združuje nežen transport materiala s tekočo tehtnico in natančno merjenje teže. Proizvajalec: K-Tron / Coperion GmbH Tip: K-ML-FB-130QC Leto izdelave: Neznano Stanje: Rabljeno Cena: Na zahtevo - Prostornina posode: Velika posoda za shranjevanje s približno 75 litrov prostornine Redsiv Ic Ejpfx Anpjch - Moč pogona: Glavni pogon (dozirni trak / dovod) 0,25 kW elektromotor, vertikalni mešalnik / ločen pogon mešalnika z 0,25 kW - Hitrost vrtenja mešala: Izjemno nizka, zaščitna hitrost vrtenja mešala za produkt 5,6 vrt/min - Tehnologija tehtanja: Visoko natančna, patentirana tehnologija tehtalnih celic SFT (Smart Force Transducer) podjetja K-Tron za največjo natančnost doziranja. - Izvedba materiala: Celotno ohišje in deli, ki so v stiku s produktom, so izdelani iz robustnega nerjavečega jekla. - Dozirni trak: Trak iz poliestrske tkanine s poliuretansko prevleko, enostavno čiščenje. Nosilna konstrukcija se lahko v celoti izvleče za namene čiščenja. - Dimenzije in teža: Dolžina: 800 mm x Širina: 700 mm x Višina: 1.200 mm - Prazna teža: Približno 100 kg

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), - RABLJENI - PORTALNI REZKALNI STROJ S POMIČNO KOLONO PODOLŽNI HOD: 12.000 mm PREČNI HOD: 1.600 mm VERTIKALNI HOD: 3.600 mm HITRI POMIKI P-P-V: 30 m/min MERA MIZE: 13.000 x 2.500 x 300 mm VRETENO: 450–5.000 min⁻¹; 34 kW; 830 Nm; ISO 50 GLAVA: UNIVERZALNA AVTOMATSKA, OSI A/B; MILLESIMALNO POZICIONIRANJE MAGAZIN ORODIJ: VERIŽNI TIP; 100 POZICIJ KRMILNA ENOTA: HEIDENHAIN TNC 640 VISOKOTLAČNO HLADILNO: 40 Bar Redpfxjzbnr Ao Anpsch TEŽA: 87.480 kg OPREMA: TRANSPORTER OSTRUŽKOV; LASERSKI MERILEC ORODIJ; PAPIRNI FILTER; MERILNA Sonda; PRENOSNO ROČNO KOLESCE OPOMBA: VRTLJIVA MIZA 1500x1500, 1,5 min⁻¹, NAJVEČJA DOVOLJENA OBREMENITEV 15.000 kg; GLAVNA DVOJNA ZIBELKA ZA NALAGANJE/RAZLAGANJE; MOBILNA DELOVNA PLATFORMa; OBODNA OGRADA; STATIČNA RTCP ROTACIJSKIH MIZ; STATIČNA RTCP V PROSTORU; AUTOKAL; VIBRACIJSKA Sonda; REZERVOAR ZA HLADILNO TEKOČINO 1.500 l; FUNKCIJA GREEN MODE.

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), A complete Artec recycling and extrusion line is available. Material compatibility: PE/PP/PS/ABS/LDPE/HDPE/MDPE. Screw diameter: 145 mm, L/D ratio: 42, extrusion output: 700 kg/h, double degassing. Power ratings for shredder/extruder/screen changer: 55 kW / 609 kW / 55 kW. Overall system dimensions (L/W/H): approx. 20,700 mm / 3,000 mm / 3,400 mm. Control system: Siemens. Includes shredder, feeding units, storage and mixing silo, feed conveyor, extruder, vacuum pump, melt filter, hot-cut pelletizer, bag filling and weighing station, and bagging station. Documentation available. On-site inspection is possible. Rcsdpfxov Ip S Hs Anpjh

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity, hot circuit: 48 kW Heating capacity, cold circuit: 12 kW Cooling capacity, hot circuit: 42 kW Cooling capacity, cold circuit: 270 kW Medium: Water up to 200°C Maximum external volume: 10 liters at 200°C Max. flow rate: up to 200 l/min Max. delivery pressure: up to 6.5 bar Motor power: 5.5 kW Dimensions (LxWxH): 1,395 x 753 x 1,180 mm Weight: approx. 580 kg *EQUIPMENT HIGHLIGHTS: - Control and operation via PLC with touch screen - Heating with stainless steel tubular heaters made of Incolloy - Heater control via solid-state relays - Control cabinet IP54, externally ventilated - Electrical wiring on terminal blocks - Volt-free input for signal to switch between heating/cooling (front door) - Volt-free contact for collective alarm via 3-pin connector (front door) - Temperature control unit with heating and cooling circuits, for connection to a valve station for rapid switching between hot and cold circuits - Temperature-controlled feed of return water - Level monitoring with automatic level compensation - Dirt filters in cooling water inlet and in return line of the circulation system - Separate automatic filling with strainer - Flow measurement using differential pressure principle in both circuits - Monitoring of heating element surface by temperature sensor - System pressure regulation, required compressed air connection: 6 to 8 bar - Pressure boosting pump type DS 360 for make-up water - Corrosion-resistant components (stainless steel, brass) Rcedpog Ey Ufsfx Anpsh - Unit mounted on castors and ready for connection *OPTIONS: - EcoTemp system for intermittent operation - Connection for external temperature sensor PT100 or type J/K - Remote touch screen with 15 m cable Visit our website for more details or for alternative performance classes. *This unit is compliant with European directives. Other directives and standards are only fulfilled if specified in the order confirmation. This technical specification reflects the standard configuration; customer-specific deviations from the standard are listed in quotations or order confirmations.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Transportne in dozirne naprave Redpfx Aned Twgcjpoch Blagovna znamka: A. Tschritter Tip: WC 100 Leto izdelave: 2004

Leto izdelave: 2000, stanje: rabljeno, Used filterless suction conveying unit Rcsdpfx Anodlpynjpoh

Stanje: rabljeno, Leto izdelave: 2011, cene lahko posredujem samo, če mi pošljete e-pošto in zapišete svoj e-poštni naslov, saj Machineseeker vaš e-poštni naslov šifrira. STROJ: GILDEMEISTER CTX Alpha 300 V3S LETO IZDELAVE: 2011 SERIALNA ŠTEVILKA: 00400003392 KRMILJE: Siemens Sinumerik 840D sl ShopTurn ERGOline TIP STROJA: CNC stružni center s C-osjo in pogonskimi orodji KAPACITETA: Maksimalni premer struženja: 200 mm Maksimalni premer vzvratnega vrtenja: 500 mm Maksimalna dolžina struženja: 300 mm Kapaciteta dvižne cevi: 51 mm GLAVNO VRETENO: Rodpfxozd R S As Anpoch Priključek vretena: A2-5 Velikost vpenjalne glave: 165 mm hidravlična trijočeljustna glava Premer vretena: 65 mm Maksimalno število vrtljajev vretena: 6.000 min⁻¹ Moč motorja vretena: 16,5 kW (100 % delovanje) 25 kW (40 % delovanje) Maksimalni navor vretena: 192 Nm PREMIKI: Pomik X-osi: 190 mm Pomik Z-osi: 335 mm Hitri pomik X: 30 m/min Hitri pomik Z: 30 m/min REVOLVERSKA GLAVA: Tip revolverske glave: VDI 30 Število postaj: 12 Število pogonskih postaj: 12 Maksimalna hitrost pogonskega orodja: 5.000 min⁻¹ Moč pogonskega orodja: 3,7 kW Resolucija C-osi: 0,001° KONTRALEV: Hidravlični kontraliv (opcijsko glede na konfiguracijo stroja) HLADILNI SISTEM: Poplavno hlajenje Možnost priklopa tračnega transporterja odrezkov NATANČNOST: Natančnost pozicioniranja: ±0,005 mm Ponavljivost: ±0,003 mm ELEKTRIČNO: Zahteve za napajanje: 400 V / 50 Hz / 3 faze Priključna moč: pribl. 30 kVA DIMENZIJE: Dolžina: 4.260 mm Širina: 2.510 mm Višina: 1.825 mm TEŽA STROJA: pribl. 4.000 kg

Stanje: novo, Cutting capacity at 90°: round 305 mm Rcodpfjupw R Aex Anpeh Cutting capacity at 90°: square 260 mm Cutting capacity at 90°: rectangular 350x200 mm Saw band length 3375x27x0.9 mm Band speed 18 - 100 m/min Table height 880 mm Total power requirement 1.5/1.8 kW Machine weight approx. 0.84 t Space requirement approx. 1.85 x 1.9 x 2.0 m Fully automatic mitre band saw • Mitre left 45° automatic operation • Mitre left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • One-piece cast frame and gearbox, extremely quiet and low-vibration cutting • Removable chip tray (for cleaning/disinfection) • Shock-resistant and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Folding safety cover • Fine feed adjustment • Semi-automatic cut! • Optimize workflow with CNC control Parameters such as quantity and material lengths can be entered, with automatic kerf compensation • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with various section lengths • Automatic feed unit (CNC) via ball screw incremental feed with automatic length compensation. Adjustable for cut-off lengths from 2 mm to 9,999 mm, remnant length 170 mm. Included: - Micro-spray unit - Leveling elements